Silicon Labs

EFM32TG210F32-QFN32T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

MPN: EFM32TG210F32-QFN32T ✓ نشط
2.5 V / 3.3 V Vdss 0.6 uA Id 32-QFN (6 x 6 mm) Package 32 MHz Speed 32 KB (32K x 8) Memory
الحد الأدنى للطلب: 1 |

EFM32TG210F32-QFN32T نظرة عامة

Silicon Labs EFM32TG210F32-QFN32T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 32 KB of Flash, 4 KB of RAM, and 24 digital I/O pins in a 32-QFN 6 x 6 mm package. It is designed for energy-sensitive embedded systems that require fast wake-up, low active power, and extensive peripheral integration without a high-power external MCU.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The EFM32TG210 belongs to the Tiny Gecko family, which places it in the hierarchy of ARM Cortex-M3 MCU, 32-bit microcontroller, embedded processor, and integrated circuit. Its combination of a 32 MHz Cortex-M3 core and energy-saving operating modes is intended for battery-powered sensors, portable instruments, industrial controls, and connected embedded products.

Principal features include 32 KB of Flash memory, 4 KB of SRAM, 24 digital I/O pins, two 16-bit timers, AES hardware security, and three operational amplifiers according to the product-page information for this device. The Tiny Gecko platform supports fast wake-up behavior and multiple low-power modes, including a Stop mode specified as low as 0.6 uA for the EFM32TG family. These characteristics allow firmware to remain dormant between measurement or communication events and reduce the energy burden of always-connected battery equipment.

The EFM32TG210F32-QFN32T uses an ARM Cortex-M3 processor with a 32-bit RISC architecture. The processor can achieve as much as 1.25 Dhrystone MIPS/MHz, while the integrated architecture also includes a Memory Protection Unit supporting as many as eight memory segments and a Wake-up Interrupt Controller for events occurring while the CPU sleeps. Autonomous peripherals can perform selected functions with limited processor intervention, helping both response speed and energy efficiency. A family run-current figure of 150 uA/MHz indicates how processing demand translates into active operating power.

Typical uses include low-power sensor nodes, battery-operated industrial monitors, compact instrumentation, wearable accessories, connected building equipment, and control systems with a small analog-signal-processing requirement. The three operational amplifiers can support local conditioning of sensor outputs, while AES hardware can accelerate compatible cryptographic workloads. The 24 digital I/O pins provide external interfaces for sensors, buttons, indicators, communications, and actuators, subject to the device's complete pin and peripheral multiplexing configuration.

PCB design should preserve the manufacturer's recommended QFN land pattern, thermal-pad connection, and decoupling arrangement. Confirm the exact supply configuration and decoupling values in the EFM32TG210 datasheet, and account for exposed-pad heat flow when operating near the device's upper ambient-temperature limit. Treat the T ordering suffix as a packaging identifier and verify the assembled orientation, pin-one location, and tray shipping format before releasing production artwork.

This page combines the device's manufacturer specifications, package and memory details, application guidance, comparison criteria, and substitution constraints into a practical engineering reference. It also distinguishes true pin-compatible options from related family members whose Flash capacity, peripheral set, or package differs, helping designers make a replacement decision without assuming that a similar EFM32 designation guarantees drop-in compatibility.

بدائل مباشرة لـ EFM32TG210F32-QFN32T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع EFM32TG210F32-QFN32T (نفس عامل الشكل والبصمة) — يختلف في Flash Memory, Digital I/O Pins, Package, Product Type, RAM.

Silicon Labs
Flash Memory: 32 kB
Digital I/O Pins: 24 pins
Package: 32-QFN, 6 x 6 mm
قارن مع EFM32TG210F32-QFN32T →
Silicon Labs
Flash Memory: 8 kB
Digital I/O Pins: 24 pins
Package: 32-QFN, 6 x 6 mm
قارن مع EFM32TG210F32-QFN32T →

EFM32TG210F32-QFN32

✅ بديل مباشر
Silicon Labs
📦 32-QFN (6 x 6 mm)
ARM Cortex-M3 32-bit microcontroller · ARM Cortex-M3 · 32 MHz · 32 kB · 4 kB · 24 pins · 2 x 16-bit timers · 1.85 V to 3.8 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

EFM32TG210F32-QFN32T

✅ بديل مباشر
Silicon Labs
📦 32-QFN (6 x 6 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3 · 32-bit RISC · 32 KB (32K x 8) · 4 KB · 24

تواصل لمعرفة السعر

عرض ورقة البيانات ←

EFM32TG210F32-QFN32T الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ARM Cortex-M3 microcontroller
Product Family EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
CPU Core ARM Cortex-M3
CPU Architecture 32-bit RISC
Flash Memory 32 KB (32K x 8)
RAM 4 KB
Digital I/O Pins 24
Timers 2 x 16-bit timers
Operational Amplifiers 3
Hardware Security AES
العلبة 32-QFN (6 x 6 mm)
نوع التركيب Surface mount
جهد التغذية 2.5 V / 3.3 V
Stop Mode Current 0.6 uA
Run Mode Current 150 uA/MHz
Processor Performance 1.25 Dhrystone MIPS/MHz
Memory Protection Up to 8 memory segments

دليل تكوين أطراف EFM32TG210F32-QFN32T 32-qfn (6 x 6 mm)

تكوين الأطراف لـ EFM32TG210F32-QFN32T (حزمة 32-qfn (6 x 6 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 32-qfn (6 x 6 mm) لـ EFM32TG210F32-QFN32T

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ EFM32TG210F32-QFN32T.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

EFM32TG210F32-QFN32T مناسب لـ 6 التطبيقs: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Portable Medical and Wellness Devices, Low-Power Connected Controls, Compact Instrumentation and Test Equipment, Energy-Smart Building Nodes.

🧩

Battery-Powered Sensor Nodes

The EFM32TG210F32-QFN32T fits battery-powered sensor nodes that spend most of their time asleep and briefly process measurements. Its 32 MHz Cortex-M3 provides enough computing performance for filtering, calibration, and local decision logic, while the 4 KB RAM supports moderate working buffers. The Tiny Gecko family's Stop current can be as low as 0.6 uA, and Run current is specified at 150 uA/MHz for the family, helping engineers calculate duty-cycle-dependent battery demand. Twenty-four digital I/O pins support sensors, indicators, and wake sources. The 32-QFN 6 x 6 mm footprint also preserves space for compact wearable or environmental monitoring products.

🏭

Industrial Condition Monitoring

The EFM32TG210F32-QFN32T is appropriate for industrial condition-monitoring modules that periodically inspect vibration, temperature, pressure, or equipment state. The three integrated operational amplifiers can condition suitable low-level analog signals near the sensor, reducing board area and the opportunity for interference between the sensor and controller. Its 32 KB Flash accommodates acquisition routines, event classification, and communication protocols, while two 16-bit timers support periodic sampling and time-based control. Fast wake-up behavior helps the module react promptly after an interrupt or timer event while remaining in a low-power state during idle periods.

💊

Portable Medical and Wellness Devices

The EFM32TG210F32-QFN32T can serve as the control core in compact medical-adjacent or wellness devices where low power, local signal conditioning, and secure data handling are important. The three operational amplifiers support suitable excitation, buffering, or sensor-conditioning functions, while AES hardware provides a hardware-assisted path for compatible cryptographic operations. Twenty-four digital I/O pins allow connection to sensors, displays, buttons, and low-power communication hardware. Because the device is only 32 MHz with 4 KB RAM, firmware planning should focus on compact control tasks and avoid workloads requiring large local buffering. Medical claims and final compliance depend on the complete finished system rather than the MCU alone.

🌐

Low-Power Connected Controls

The EFM32TG210F32-QFN32T works well in low-power connected controls that wake to exchange data and then return to a sleep state. The 32-bit Cortex-M3 can handle protocol state machines and local control logic, and the 32 KB Flash provides room for firmware while the 4 KB RAM is appropriate for short-lived packet and peripheral buffers. Low-power modes reduce energy use between radio or sensor activity, while the 24 GPIO pins can control indicators, relays, or interface transceivers. Designers should use the family power figures of 150 uA/MHz in Run and as low as 0.6 uA in Stop as starting inputs, then include the selected radio and regulator consumption in the system-level battery calculation.

🔧

Compact Instrumentation and Test Equipment

The EFM32TG210F32-QFN32T is suitable for compact instrumentation that combines measurement, control, and a serial data interface. Three operational amplifiers can implement front-end amplification, filtering, or level conversion for suitable analog signals, and the two 16-bit timers provide timing resources for acquisition and waveform-control tasks. The 32 MHz processor can execute measurement sequencing, calibration, and communications while the microcontroller's low-power states reduce energy when the instrument is idle. The 32-QFN package reduces board area, but engineers should preserve the manufacturer's exposed-pad and decoupling layout and verify analog pin tolerances against the selected sensor output range.

🏠

Energy-Smart Building Nodes

The EFM32TG210F32-QFN32T can support energy-smart building nodes that monitor occupancy, environmental conditions, or equipment state while operating on limited power. Its 24 digital I/O pins provide flexible connections to sensors, digital interfaces, and status indicators, while three op-amps can support appropriate analog conditioning without requiring identical external amplifiers in every channel. The Cortex-M3 core handles local filtering and event logic, and the Tiny Gecko low-power modes are valuable when nodes are distributed throughout a building and communicate only periodically. The small 32-QFN package supports compact enclosure designs, while AES hardware may assist secure firmware or communication tasks when supported by the complete application stack.

What are the key specifications of EFM32TG210F32-QFN32T that engineers should know?
The EFM32TG210F32-QFN32T combines a 32 MHz ARM Cortex-M3 core, 32 KB Flash, 4 KB RAM, 24 digital I/O pins, two 16-bit timers, three operational amplifiers, and AES hardware in a 32-QFN package. According to the Silicon Labs EFM32TG datasheet and manufacturer product page, the Tiny Gecko device also supports low-power operation, including a family Stop-mode current as low as 0.6 uA. Its 32-bit RISC architecture supports fast interrupt-driven embedded control while autonomous peripherals reduce processor activity in low-duty-cycle systems.
Where can I download the EFM32TG210F32-QFN32T datasheet PDF?
The official EFM32TG data sheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. Use the manufacturer document for the complete electrical characteristics, memory map, peripheral descriptions, QFN pin assignments, recommended decoupling, and package drawings. The device-specific manufacturer page is also available at https://www.silabs.com/mcu/32-bit-microcontrollers/efm32-tiny-gecko/device.efm32tg210f32-qfn32?tab=specs. The EFM32TG reference manual separately documents the Cortex-M3 implementation and detailed peripheral behavior.
What is the operating voltage of the EFM32TG210F32-QFN32T?
The EFM32TG210F32-QFN32T is identified for 2.5 V and 3.3 V operation. The manufacturer describes the EFM32TG210 as a low-power 32-bit MCU with a Cortex-M3 processor and integrated analog, timing, and communication peripherals. Before designing the power tree, use the pin descriptions, absolute-maximum ratings, and recommended operating conditions in the official EFM32TG data sheet to determine the correct regulator arrangement, bypass capacitors, and allowable voltage ranges for each supply domain.
How much Flash and RAM does the EFM32TG210F32-QFN32T have?
The EFM32TG210F32-QFN32T contains 32 KB of Flash memory and 4 KB of RAM. The manufacturer product page identifies the Flash organization as 32K x 8 and the Digikey listing likewise describes a 32 KB Flash MCU. The 32 KB code-storage capacity is suitable for compact embedded applications, while the 4 KB SRAM should be considered when sizing buffers, stack requirements, peripheral data, and real-time control workloads.
Why is the EFM32TG210F32-QFN32T suitable for battery-powered applications?
The EFM32TG210F32-QFN32T is suitable for battery-powered applications because the Tiny Gecko platform combines a 32 MHz Cortex-M3 with fast wake-up behavior and low-power operating modes. The EFM32TG family data sheet states consumption as low as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. Actual battery life also depends on duty cycle, sensor current, radio activity, leakage, and the regulator's own quiescent consumption, so use the manufacturer's power modes during design estimation.
What can replace the EFM32TG210F32-QFN32T?
The closest drop-in candidate is EFM32TG210F32-QFN32, which represents the same EFM32TG210F32 silicon and QFN32 package without the T ordering suffix. Before substitution, confirm that the T suffix only changes the assembly or shipping format and that the incoming part meets the required temperature and qualification criteria. Related EFM32TG210F16-D-QFN32 and EFM32TG210F8-QFN32T devices use the same general family but have less Flash, so they are not parameter-equivalent drop-in replacements for a design that requires 32 KB.
Is the EFM32TG210F32-QFN32T the same as the EFM32TG210F32-QFN32?
The EFM32TG210F32-QFN32T and EFM32TG210F32-QFN32 refer to the same EFM32TG210F32 device architecture and 32-QFN package, while the T suffix distinguishes a particular ordering or shipping format. Product listings identify the base device as a 32 MHz Cortex-M3 MCU with 32 KB Flash and 4 KB RAM. A production substitution is valid only when the manufacturer confirms that package dimensions, pinout, electrical limits, temperature grade, and qualification requirements are unchanged.
When should I choose the EFM32TG210F32-QFN32T over a smaller-memory EFM32TG210 variant?
Choose the EFM32TG210F32-QFN32T when the application needs the full 32 KB Flash capacity of the EFM32TG210F32 configuration or when the larger-memory variant simplifies code organization and future feature expansion. The F16 and F8 family variants provide 16 KB and 8 KB Flash respectively, so they can create code-size constraints when firmware includes protocol libraries, encryption, logging, or complex control logic. Confirm available SRAM, peripheral requirements, and the exact package ordering before making the selection.
Is the EFM32TG210F32-QFN32T suitable for industrial sensor nodes?
The EFM32TG210F32-QFN32T is well suited to low-duty-cycle industrial sensor nodes because it combines 32 KB Flash, 4 KB RAM, 24 digital I/O pins, three operational amplifiers, and low-power modes in a compact QFN package. The integrated amplifiers can condition suitable sensor signals close to the source, reducing noise pickup and board area. Use the manufacturer's pin and electrical tables to verify analog input limits, supply requirements, temperature range, and isolation strategy before deploying it in a hazardous industrial environment.
Where can I find the EFM32TG210F32-QFN32T pinout and package drawing?
The EFM32TG210F32-QFN32T pinout and package drawing are contained in the official Silicon Labs EFM32TG data sheet at https://www.silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. Use the device-specific pin table, alternate-function columns, exposed-pad recommendations, and land-pattern dimensions when laying out the 32-QFN 6 x 6 mm footprint. Do not infer pins solely from GPIO numbering because power, ground, analog, debug, and peripheral signals use dedicated or multiplexed connections.
What is the difference between EFM32TG210F32-QFN32T and EFM32TG210F16-D-QFN32?
The principal difference is Flash capacity: EFM32TG210F32-QFN32T provides 32 KB, while EFM32TG210F16-D-QFN32 provides 16 KB, a 50% reduction. The F16 part also carries a distinct D ordering designation, so temperature, qualification, or ordering requirements must be checked separately. Although both are associated with the 32-QFN EFM32TG210 family, the smaller Flash capacity makes the F16 option unsuitable as a general drop-in substitute for firmware requiring the full 32 KB.
How do I calculate power and thermal margin for the EFM32TG210F32-QFN32T?
Begin with the EFM32TG family Run-mode figure of 150 uA/MHz, then estimate average processor current from the operating frequency, active fraction, and sleep interval. Add peripheral current, sensor load, regulator losses, and leakage to obtain the system demand. Because this is a digital microcontroller, SOA data are not applicable; thermal assessment instead depends on the QFN exposed pad, PCB copper, ambient temperature, and the package's thermal data. These calculations are design estimates and must be checked against worst-case operating conditions.
Does the EFM32TG210F32-QFN32T include hardware AES and operational amplifiers?
Yes, the EFM32TG210F32-QFN32T includes AES hardware security and three operational amplifiers. The Mouser product listing identifies 32 KB Flash, 4 KB RAM, AES, and three op-amps, while the manufacturer product page identifies the EFM32TG210's integrated analog and low-power architecture. Hardware AES can accelerate supported cryptographic operations, and the op-amps can reduce external analog-component count. Verify each peripheral's electrical limits and intended use in the EFM32TG data sheet before routing signals or cryptographic data.
Where to buy the EFM32TG210F32-QFN32T online?
Use the Request a Quote form on this page to ask for EFM32TG210F32-QFN32T availability, minimum order quantity, and current lead time. The form allows the request to be tied to the exact EFM32TG210F32-QFN32T ordering designation and its 32-QFN 6 x 6 mm package. Confirm the required temperature range, reel or tray requirement, and quantity before accepting a supply quotation so that the manufacturer ordering code matches the intended assembly process.
What is the price and lead time for EFM32TG210F32-QFN32T?
Use the Request a Quote form on this page for the current EFM32TG210F32-QFN32T price, stock position, minimum order quantity, and production lead time. Quote requests should specify the required quantity, package shipment format, and temperature or qualification requirements. The part is a standard catalog microcontroller with an official data sheet, but lead time and commercial terms can change with manufacturing conditions, so a current quotation is preferable to reusing historical pricing for production planning.
Is the EFM32TG210F32-QFN32T currently in stock?
Current EFM32TG210F32-QFN32T stock should be confirmed through the Request a Quote form on this page. Include your required order quantity, target shipment format, and production schedule in the request so the response reflects the exact MPN rather than a related EFM32TG210 configuration. Because component inventory can vary by package, temperature grade, and ordering suffix, do not substitute a generic EFM32TG210 availability statement without checking the complete device designation.

بيانات مرجعية هندسية لـ EFM32TG210F32-QFN32T — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose EFM32TG210F32-QFN32T for a compact, energy-sensitive design that requires a 32 MHz ARM Cortex-M3, 32 KB Flash, 4 KB RAM, 24 GPIO pins, AES hardware, and three integrated operational amplifiers. Select EFM32TG210F32-QFN32 when its ordering and shipment format better match the production plan; it represents the same device configuration and footprint. Do not use EFM32TG210F16-D-QFN32 as a general drop-in replacement because its 16 KB Flash is 50% lower, and avoid the F8 variant when its 8 KB Flash cannot contain the complete firmware. The 4 KB RAM also favors simple control and buffering rather than graphics, large protocol stacks, or data-intensive workloads. Before release, verify the exact QFN footprint, exposed-pad layout, decoupling, analog limits, temperature grade, and the manufacturer's ordering-code definitions.

المقارنة مع البدائل

المعامل هذا المنتج EFM32TG210F32-QFN32 EFM32TG210F32-QFN32T
Brand Silicon Labs Silicon Labs Silicon Labs
Package 32-QFN (6 x 6 mm) 32-QFN (6 x 6 mm) 32-QFN (6 x 6 mm)
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB (32K x 8) 32 KB (32K x 8) 32 KB (32K x 8)
RAM 4 KB 4 KB 4 KB
Digital I/O Pins 24 24 24
Timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers
Operational Amplifiers 3 3 3
Hardware Security AES AES AES
Family Stop Mode Current 0.6 uA 0.6 uA for the EFM32TG family 0.6 uA for the EFM32TG family
Ordering Suffix T Without T suffix With T suffix

أبرز الفروقات

  • Provides the full 32 KB Flash configuration within the compact Tiny Gecko family (مقابلEFM32TG210F16-D-QFN32)
  • Combines three integrated operational amplifiers with a 32 MHz Cortex-M3 (مقابلEFM32TG210F8-QFN32T)
  • Uses a compact 32-QFN 6 x 6 mm package for space-constrained embedded products (مقابلEFM32TG210F32-QFN32)

ملاحظات التصميم

Use the manufacturer QFN-32 land pattern and preserve the exposed-pad connection described in the EFM32TG data sheet. Place all required input and output bypass capacitors immediately beside their associated pins, with the shortest possible return path to the ground plane. Confirm pin-one orientation against the package drawing and assembly drawing before fabrication. A mechanically similar 6 x 6 mm QFN is not sufficient for a valid PCB footprint; pad dimensions, thermal pad, solder-mask definition, and paste pattern must match the specified package.

Estimated: using the EFM32TG family Run-mode figure of 150 uA/MHz, continuous operation at 32 MHz corresponds to approximately 4.8 mA of processor-associated current before peripheral and system loads are included. This estimate is not a guaranteed application current and should be checked against the data sheet operating conditions. Add sensor, communications, and regulator losses, and evaluate average consumption using the actual active and sleep duty cycle rather than selecting solely from the maximum CPU frequency.

The 32-QFN package requires attention to its exposed thermal pad and board copper when the processor remains active near maximum frequency. Keep the thermal pad connected according to the manufacturer's layout guidance and provide surrounding copper for heat spreading. Validate the final assembly with a thermal test at the highest expected ambient temperature and production load. Because SOA is applicable to power semiconductors rather than digital microcontrollers, thermal qualification should rely on the package thermal data and measured board performance.

Do not treat related EFM32TG210 memory variants as equivalent substitutes: the F16 and F8 options have only 16 KB and 8 KB Flash, respectively, compared with 32 KB in the F32 device. Also verify that any alternate ordering suffix preserves the required temperature grade, qualification, package, and shipping format. A software image that fits within 16 KB might still fit physically but could exceed the alternate part's memory once startup data, libraries, and future updates are included.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer product page and EFM32TG data sheet do not explicitly state the requested compliance classifications in the cited text. Confirm RoHS, REACH, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals documentation for the exact ordering code before production release.

عمليات بحث ذات صلة

efm32tg210f32 qfn32 EFM32TG210F32-QFN32T datasheet EFM32TG210F32-QFN32T specifications EFM32TG210F32-QFN32T pinout EFM32TG210F32-QFN32T datasheet pdf EFM32TG210F32-QFN32T footprint EFM32TG210F32-QFN32T replacement EFM32TG210F32-QFN32T equivalent EFM32TG210F32-QFN32T price EFM32TG210F32-QFN32T stock Silicon Labs EFM32TG210F32-QFN32T EFM32TG210F32-QFN32T vs EFM32TG210F16-D-QFN32 EFM32TG210F32-QFN32T low power application EFM32TG210F32-QFN32T 32 MHz Cortex-M3

المكونات والمصطلحات ذات الصلة

Silicon Labs EFM32TG210F32-QFN32T EFM32TG210F32-QFN32 EFM32TG210F16-D-QFN32 EFM32TG210F8-QFN32T EFM32TG210 EFM32TG Tiny Gecko ARM Cortex-M3 32-bit RISC processor microcontroller MCU embedded processor 32-QFN QFN family surface mount Flash memory RAM AES operational amplifier low-power mode Stop mode fast wake-up industrial sensor battery-powered device
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر