Silicon Labs

EFM32TG232F8-QFP64T - 32MHz Cortex-M3 MCU, 8KB Flash, 64-TQFP | Silicon Labs

MPN: EFM32TG232F8-QFP64T ✓ چالاک
2.5 V / 3.3 V Vdss 64-TQFP (10 x 10 mm) Package 32 MHz Speed 8 kB (8K x 8) Memory
MOQ: 1 |

EFM32TG232F8-QFP64T گشتی

The Silicon Labs EFM32TG232F8-QFP64T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz with 8 kB of Flash, 2 kB of SRAM and 53 digital I/O pins, housed in a 64-pin TQFP (10 x 10 mm) surface-mount package. It is a member of the EFM32 Tiny Gecko family, a low-power 32-bit MCU line designed around energy-sensitive embedded applications.

A microcontroller (MCU) is a single integrated circuit that combines a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog blocks. It sits at the bottom of the embedded hierarchy: MCU -> 32-bit microcontroller -> ARM Cortex-M core -> embedded processor -> semiconductor. Because the EFM32TG232 integrates its own memory, clocking, and peripherals, it replaces a discrete processor-plus-support-chip design and reduces both board area and total system power.

Key features of the EFM32TG232F8-QFP64T include an on-chip hardware AES encryption accelerator, three integrated operational amplifiers, and two 16-bit general-purpose timers alongside the ARM Cortex-M3 core. The Tiny Gecko platform adds dedicated low-energy techniques, fast wake-up times, and multiple energy-saving modes so the same part can serve both always-on sensing duty cycles and short burst-processing windows.

Technically, the device runs a 32-bit RISC Cortex-M3 pipeline at up to 32 MHz with a 2.5 V / 3.3 V supply option, giving designers a single 3.3 V rail design with margin. The 53 digital I/O pins spread across 64 leads provide generous connectivity for sensors, discrete actuators, and status indication without an external I/O expander, while the integrated op-amps allow direct conditioning of analog front-end signals.

Typical applications include battery-powered IoT and smart-home sensor nodes, industrial condition monitoring and data acquisition, energy metering, portable medical instrumentation, and LED lighting control. The 64-TQFP package is a good fit for prototypes and cost-driven designs where fine-pitch QFN assembly is not wanted.

When designing around this MCU, budget flash and SRAM carefully: 8 kB of Flash and 2 kB of RAM must hold the application code, the boot path, and any data buffering. Decouple the supply pins close to the device with a bulk ceramic plus a high-frequency bypass capacitor, and keep the 53 I/O routes short so switching edges do not disturb adjacent analog channels served by the internal op-amps.

This page brings together device specifications, same-package drop-in options, comparison tables, and practical design notes in one place, giving engineers a faster path from part selection to a working low-power board.

جێگرەوەکانی جێگۆڕکێ بۆ EFM32TG232F8-QFP64T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EFM32TG232F8-QFP64T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Product Type, Series, Digital I/O Pins, Package.

Silicon Labs
Flash Memory: 16 kB (16K x 8)
Product Type: 32-bit ARM Cortex-M3 microcontroller
Series: EFM32 Tiny Gecko
بەراوردکردن لەگەڵ EFM32TG232F8-QFP64T →
Silicon Labs
Flash Memory: 32 KB
Product Type: 32-bit ARM Cortex-M3 microcontroller
Series: EFM32 Tiny Gecko
بەراوردکردن لەگەڵ EFM32TG232F8-QFP64T →
Silicon Labs
Product Type: ARM Cortex-M3 Tiny Gecko Microcontroller
Series: Tiny Gecko
Digital I/O Pins: 53 pins
بەراوردکردن لەگەڵ EFM32TG232F8-QFP64T →

EFM32TG232F16-QFP64T

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 64-TQFP (10 x 10 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3 · 16 kB (16K x 8) · 4 kB · 53 pins · 2 x 16-bit timers

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EFM32TG232F8-D-QFP64

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 64-TQFP (10 x 10 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · 8 kB · 2 kB · 53 · 2 x 16-bit timers · 1.98 V to 3.8 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EFM32TG232F32-QFP64T

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Silicon Labs
📦 64-TQFP (10 x 10 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 32 KB · 4 KB · 53 pins · 2 x 16-bit timers · AES hardware · 3 amplifiers

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EFM32TG232F64-QFP64T

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 64-TQFP (10 x 10 mm)
Same 64-TQFP EFM32TG232 pinout and peripherals; Flash increases from 8 kB to 64 kB (+700%), core speed, RAM and I/O identical

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

EFM32TG232F8-QFP64

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 64-TQFP (10 x 10 mm)
ARM Cortex-M3 Tiny Gecko Microcontroller · ARM Cortex-M3 · 32 MHz · 8 kB (8K x 8) · 2 kB · 53 pins · 2 x 16-bit timers · 1.85 V to 3.8 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EFM32TG232F8-QFP64T زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit ARM Cortex-M3 Microcontroller (MCU)
Core ARM Cortex-M3, 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 8 kB (8K x 8)
SRAM 2 kB
Digital I/O Pins 53
Timers 2 x 16-bit
ڤۆڵتیەی دابینکردن 2.5 V / 3.3 V
Hardware Encryption AES accelerator
Integrated Analog 3 operational amplifiers
پاکێج 64-TQFP (10 x 10 mm)
Lead Count 64 pins
جۆری دامەزراندن Surface Mount
Shipping Format Tray
Device Family EFM32 Tiny Gecko
Series EFM32TG
Ordering Code EFM32TG232F8-QFP64T
دۆخی RoHS Compliant

ڕێنمایی ڕێکخستنی پینی EFM32TG232F8-QFP64T 64-tqfp (10 x 10 mm)

ڕێکخستنی پین بۆ EFM32TG232F8-QFP64T (پاکێجی 64-tqfp (10 x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 64-tqfp (10 x 10 mm) بۆ EFM32TG232F8-QFP64T

هیچ داتای وردی پینئاوت بەردەست نییە بۆ EFM32TG232F8-QFP64T.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

EFM32TG232F8-QFP64T گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered IoT Sensor Node, Industrial Condition Monitoring and Data Acquisition, Energy Metering and Utility Measurement, Portable Medical and Diagnostic Devices, LED Lighting and Display Control, Consumer IoT and Smart Home Controller.

🧩

Battery-Powered IoT Sensor Node

The EFM32TG232F8-QFP64T suits always-on sensing nodes because the Tiny Gecko platform adds energy-saving modes and fast wake-up times, so the MCU can idle between samples and resume quickly for short processing bursts. The 32 MHz Cortex-M3 core handles sampling, filtering, and packet assembly while the hardware AES accelerator secures the radio link without a separate crypto chip, and 53 digital I/O pins let one device handle the sensor, a status indicator, and a wake-up button. At 2.5 V / 3.3 V it fits standard lithium and coin-cell regulator outputs directly. The practical constraint is code space: 8 kB of Flash and 2 kB of RAM must hold the whole application, so a compact protocol implementation and short wake windows are essential.

🏭

Industrial Condition Monitoring and Data Acquisition

For vibration, temperature, or motor-current monitoring stations, the EFM32TG232F8-QFP64T combines a 32-bit Cortex-M3 core with two 16-bit timers, giving predictable timer-driven sampling without relying on software delays. Three integrated operational amplifiers allow direct conditioning of low-level transducer signals close to the source, which shortens analog traces and reduces susceptibility to board-level noise on factory floors. The 53 digital I/O pins accommodate discrete sensor channels, alarm outputs, and digital isolation barriers, while the 64-pin TQFP package remains easy to assemble and to rework in the field. The 8 kB Flash limit means most production firmware performs filtering on the fly and streams results rather than buffering large data sets in RAM.

⚡

Energy Metering and Utility Measurement

Smart energy meters need accurate, repeatable current and voltage sampling plus secure communications, and the EFM32TG232F8-QFP64T provides both: the 32-bit Cortex-M3 core performs the arithmetic for RMS and power calculation, two 16-bit timers support precise sampling intervals, and the hardware AES accelerator protects the metering data link. Three integrated op-amps can buffer current-sense amplifier outputs without external active parts, and the 53 digital I/O pins drive display and relay control. The 2.5 V / 3.3 V supply flexibility suits both 3.3 V meter rails and 2.5 V sensor front ends. Because the device ships in a 64-pin TQFP package with a wide pin count, meter boards can be assembled with standard through-hole-compatible visual inspection rather than fine-pitch BGA handling.

💊

Portable Medical and Diagnostic Devices

Handheld diagnostic and monitoring instruments benefit from the EFM32TG232F8-QFP64T because its small 10 x 10 mm TQFP footprint leaves board area for sensors and a display, while the hardware AES accelerator protects patient-linked data at rest and in transit. Three integrated operational amplifiers allow the bio-signal front end to be built close to the electrodes, reducing noise pickup in the analog path. The low-power architecture with fast wake-up keeps standby current low between measurement sessions, which directly extends battery life in ambulatory devices. Designers must verify the operating temperature range against the clinical environment requirement and confirm that the 8 kB Flash budget covers the measurement firmware, calibration tables, and any on-board logging before freezing the bill of materials.

💡

LED Lighting and Display Control

Architectural and decorative LED controllers demand precise timing, low standby consumption, and compact board area, all of which the EFM32TG232F8-QFP64T delivers. Two 16-bit timers drive PWM channels with deterministic resolution for smooth dimming and colour-mixing effects, and the 32 MHz Cortex-M3 core runs animation patterns and effects processing. Fifty-three digital I/O pins are enough to drive LED driver enables, colour channels, and fault indicators directly, and the AES accelerator can authenticate remote configuration commands in connected fixtures. The 8 kB Flash capacity suits compact effects engines and fixed patterns rather than long video or complex lighting libraries, and the 64-pin TQFP package simplifies thermal inspection of driver boards in enclosed luminaires.

📱

Consumer IoT and Smart Home Controller

Smart-home hubs and wireless end nodes need to wake on demand, run protocol handlers briefly, and then disappear into a low-power state, which is exactly the behaviour the EFM32TG232F8-QFP64T provides through its energy-saving modes and fast wake-up times. The 53 digital I/O pins support touch inputs, relay or triac drives, status LEDs, and reset or pairing buttons without external expansion, and the hardware AES accelerator secures the local network link. Three integrated op-amps can drive sensor conditioning or level-shifting front ends directly on the board. Because only 8 kB of Flash is available, the device is best positioned as a leaf or endpoint node rather than a hub that must buffer radio traffic or hold a large user interface, and the 3.3 V supply option works with common Wi-Fi and BLE module rails.

کورتەی بەرهەمە پێشنیارکراوەکان

MCP3424-E/SL Microchip Technology بەکارهێنراوە لە: Battery-Powered IoT Sensor Node, Portable Medical and Diagnostic Devices PCA9555PWR NXP Semiconductors بەکارهێنراوە لە: Battery-Powered IoT Sensor Node, LED Lighting and Display Control, Consumer IoT and Smart Home Controller EFM32ZG110F4-B-QFN24 Silicon Labs بەکارهێنراوە لە: Battery-Powered IoT Sensor Node MCP608-I/SN Microchip Technology بەکارهێنراوە لە: Industrial Condition Monitoring and Data Acquisition, Portable Medical and Diagnostic Devices ADS1254E Texas Instruments بەکارهێنراوە لە: Industrial Condition Monitoring and Data Acquisition STM32L051K8T6 STMicroelectronics بەکارهێنراوە لە: Industrial Condition Monitoring and Data Acquisition MCP3428-E/ST Microchip Technology بەکارهێنراوە لە: Energy Metering and Utility Measurement TLV2402ID Texas Instruments بەکارهێنراوە لە: Energy Metering and Utility Measurement PCA9554PWR NXP Semiconductors بەکارهێنراوە لە: Energy Metering and Utility Measurement NE5534PSR Texas Instruments بەکارهێنراوە لە: Portable Medical and Diagnostic Devices PCF8574DWR Texas Instruments بەکارهێنراوە لە: LED Lighting and Display Control STM8L152K6U6 STMicroelectronics بەکارهێنراوە لە: LED Lighting and Display Control ATSAM4S4BA-AN Microchip Technology بەکارهێنراوە لە: Consumer IoT and Smart Home Controller SP3232EET-L/TR MaxLinear بەکارهێنراوە لە: Consumer IoT and Smart Home Controller
What is the EFM32TG232F8-QFP64T?
The EFM32TG232F8-QFP64T is a 32-bit ARM Cortex-M3 microcontroller from Silicon Labs that runs at up to 32 MHz with 8 kB of Flash, 2 kB of SRAM, and 53 digital I/O pins in a 64-pin TQFP package. It belongs to the EFM32 Tiny Gecko family, a low-power 32-bit MCU platform built around energy-saving modes and fast wake-up times for energy-sensitive embedded designs. The part also integrates a hardware AES accelerator and three operational amplifiers.
How much flash and RAM does the EFM32TG232F8-QFP64T have?
The EFM32TG232F8-QFP64T provides 8 kB of Flash organized as 8K x 8 and 2 kB of SRAM. The 8 kB Flash figure comes from the 'F8' density code in the Silicon Labs part numbering, while the '232' code identifies the device with its higher pin and peripheral count. That memory budget suits boot code, a small sensor fusion or control routine, and a modest configuration buffer, but it is tight for protocol stacks, logging, or OTA image buffering.
What is the maximum CPU frequency of the EFM32TG232F8-QFP64T?
The EFM32TG232F8-QFP64T operates at up to 32 MHz using an ARM Cortex-M3 32-bit RISC core. That speed is ample for sampling loops, sensor conditioning, and light protocol handling in low-power designs, and because the part spends most of its time in energy-saving modes, the peak clock is rarely the limiting factor for average power consumption. Higher-density EFM32TG232 Flash options run the same core and are often chosen simply to gain code space.
What is the operating voltage of the EFM32TG232F8-QFP64T?
The EFM32TG232F8-QFP64T supports a 2.5 V / 3.3 V supply, which lets it sit directly on a common 3.3 V industrial or instrumentation rail or be paired with a 2.5 V core rail in mixed-voltage designs. The device family includes internal on-chip regulators and a separate decoupling output intended for external bypass capacitor placement, so follow the Silicon Labs reference layout to keep the core rail clean under fast wake-up transients.
Where can I download the EFM32TG232F8-QFP64T datasheet PDF?
The EFM32TG232F8-QFP64T datasheet PDF can be downloaded from the Silicon Labs EFM32TG series datasheet page, and a device-specific copy is mirrored on LCSC at https://www.lcsc.com/datasheet/C6612046.pdf. Silicon Labs also publishes a revision notice describing a drop-in replacement part number for the affected EFM32TG Series 0 silicon revision, which is worth reading before a legacy design is released to production.
Where is the EFM32TG232F8-QFP64T pinout and package pin assignment?
The pin assignment for the EFM32TG232F8-QFP64T is documented in the pin configuration tables of the EFM32TG series datasheet, covering the 64-lead TQFP (10 x 10 mm) package. Use the pin-description table in that document when assigning PCB tracks and when populating the 53 digital I/O pins. The same table identifies the power, ground, decoupling, and analog pins that must be bonded to planes and bypass capacitors for reliable operation.
Where can I buy the EFM32TG232F8-QFP64T?
The EFM32TG232F8-QFP64T can be ordered through the Request a Quote form on this page, where quantity breaks, current stock status, and lead time are confirmed for your build. The part is supplied in tray format under the 'T' ordering suffix. Because Tiny Gecko devices are frequently ordered alongside development kits and EFM32 Starter Kits, quote the full board BOM in one request to simplify sourcing.
What is the lead time for the EFM32TG232F8-QFP64T?
Current lead time for the EFM32TG232F8-QFP64T is confirmed through the Request a Quote form on this page, which reflects live inventory and manufacturing schedules for the exact ordering code and packing format. Lead time for MCU families like the EFM32TG varies with order quantity and program status, so planning a prototype build and a production build as separate line items is recommended. Requesting the quote early in the schematic phase keeps the firmware bring-up schedule realistic.
Is the EFM32TG232F8-QFP64T currently in stock?
Stock for the EFM32TG232F8-QFP64T is reported live through the Request a Quote form on this page. The EFM32TG232 is an established, actively supported Silicon Labs device, so supply is generally available in tray packaging, though allocations can move quickly during production ramps. Submitting a quote request with your forecast quantity gives the clearest picture of availability and allocation for your build window.
EFM32TG232F8-QFP64T vs EFM32TG232F16-QFP64T - which should I choose?
The EFM32TG232F8-QFP64T and the EFM32TG232F16-QFP64T share the same Silicon Labs EFM32TG232 device, the same 64-pin TQFP package, and the same 32 MHz Cortex-M3 core, so both are drop-in compatible at the pin level. The only functional difference is Flash density: 8 kB on the F8 version versus 16 kB on the F16 version, a 100% increase in code space. Choose the F8 for minimal firmware and the F16 when you need protocol stack, bootloader, or logging headroom.
What is the difference between EFM32TG232F8-QFP64T and EFM32TG232F32-QFP64T?
Both parts are the same EFM32TG232 silicon with the same 64-pin TQFP footprint, 32 MHz Cortex-M3 core, 2 kB of SRAM, 53 digital I/O pins, AES accelerator, and three integrated op-amps. The difference is Flash density: 8 kB on the EFM32TG232F8-QFP64T versus 32 kB on the EFM32TG232F32-QFP64T, meaning four times the code space for the same per-pin price structure. The larger variant is the usual pick once a Bluetooth or sub-GHz protocol stack is added.
When should I choose the EFM32TG232F8-QFP64T over a larger-Flash EFM32TG232 variant?
Choose the EFM32TG232F8-QFP64T when your firmware fits comfortably inside 8 kB of Flash and 2 kB of SRAM, which is typical for single-sensor nodes, simple haptic or LED drivers, and low-rate data loggers. Its 53 digital I/O pins and three integrated op-amps let you eliminate external interface chips, and the same 64-pin TQFP footprint means you can move to a 16 kB or 32 kB Flash variant later without a PCB respin if code growth outpaces the budget.
What is the best drop-in replacement for the EFM32TG232F8-QFP64T?
The best drop-in replacements for the EFM32TG232F8-QFP64T are the same-footprint EFM32TG232 variants in the 64-pin TQFP package: the EFM32TG232F16-QFP64T, EFM32TG232F32-QFP64T, and EFM32TG232F64-QFP64T, which differ only in Flash density and therefore require no PCB change. For an exact functional match with identical memory size, the EFM32TG232F8-D-QFP64 ordering code is a like-for-like substitute. Verify the ordering suffix to confirm tray versus reel packing for your assembly process.
Can the EFM32TG232F8-QFP64T replace an EFM32TG842F32-QFP64T?
No - the EFM32TG232F8-QFP64T is not a pin-compatible substitute for the EFM32TG842F32-QFP64T. The TG842 belongs to a different Silicon Labs Gecko device family with a different peripheral set and different memory architecture, so even though both are 64-pin TQFP parts, the pin functions do not match. Treat the EFM32TG842 as a separate design target and use the EFM32TG232F16, F32, or F64 variants as the upgrade path for a Tiny Gecko board.
Is the EFM32TG232F8-QFP64T suitable for battery-powered IoT sensor nodes?
Yes, the EFM32TG232F8-QFP64T fits battery-powered IoT sensor nodes well. The Tiny Gecko platform provides energy-saving modes and fast wake-up times, so the device can sleep between samples and wake quickly for a short processing burst, and the integrated AES accelerator handles link-layer encryption without a separate crypto chip. Its 3.3 V / 2.5 V supply range also fits standard coin-cell and lithium regulator outputs. Plan the average-current budget around the sleep current and the wake-up transient on the supply rail.
What are the key specifications of the EFM32TG232F8-QFP64T that engineers should know?
The EFM32TG232F8-QFP64T combines a 32 MHz ARM Cortex-M3 core, 8 kB Flash, 2 kB SRAM, 53 digital I/O pins, two 16-bit timers, three integrated operational amplifiers, and a hardware AES accelerator in a 64-pin TQFP (10 x 10 mm) package running from a 2.5 V / 3.3 V supply. Silicon Labs positions the Tiny Gecko platform around low-energy techniques and fast wake-up times, so design decisions should centre on average current draw and code-space headroom rather than raw clock speed.
What can replace the EFM32TG232F8-QFP64T?
The EFM32TG232F8-QFP64T can be replaced by any EFM32TG232 device in the 64-pin TQFP (10 x 10 mm) package, provided the Flash density meets your firmware needs: the EFM32TG232F16-QFP64T, EFM32TG232F32-QFP64T, or EFM32TG232F64-QFP64T. All of them keep the 32 MHz Cortex-M3 core, 2 kB SRAM, 53 digital I/O pins, AES accelerator, and three op-amps, so they are true drop-ins. The EFM32TG232F8-D-QFP64 is the like-for-like equivalent with identical memory sizing.
Is the EFM32TG232F8-QFP64T the same as the EFM32TG232F8-D-QFP64?
Yes - the EFM32TG232F8-D-QFP64 is the same EFM32TG232 device with identical 8 kB Flash, 2 kB SRAM, 53 I/O pins, 32 MHz Cortex-M3 core, and 64-pin TQFP package. The 'D' suffix denotes a silicon revision ordering code rather than a different feature set, and the device remains pin-to-pin compatible with the EFM32TG232F8-QFP64T. Because Silicon Labs published a revision notice with a drop-in replacement part number, check the EFM32TG Series 0 revision PDF before standardising on either ordering code.

داتای سەرچاوەی ئەندازیاری بۆ EFM32TG232F8-QFP64T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the EFM32TG232F8-QFP64T when your application is firmware-light and interface-rich: 8 kB of Flash and 2 kB of SRAM cover small control loops, sensor nodes, LED drivers, and simple energy meters, while 53 digital I/O pins plus three integrated op-amps typically remove two or three external chips from the bill of materials. Its 64-pin TQFP package is also easier to assemble and inspect than a fine-pitch QFN. Step up to the EFM32TG232F16-QFP64T when a protocol stack or bootloader pushes past 8 kB, to the F32 when you add radio handling or logging, and to the F64 for application code plus security updates on the same footprint. Use the EFM32TG232F8-D-QFP64 when you need a like-for-like part on a different silicon revision. Do not treat EFM32TG842 or EFM32G devices as substitutes: they belong to different families with different pin functions. The honest trade-off of the F8 part is code headroom, not performance.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە EFM32TG232F16-QFP64T EFM32TG232F8-D-QFP64 EFM32TG232F32-QFP64T EFM32TG232F64-QFP64T EFM32TG232F8-QFP64
Package 64-TQFP (10 x 10 mm) 64-TQFP (10 x 10 mm) - same 64-TQFP (10 x 10 mm) - same 64-TQFP (10 x 10 mm) - same 64-TQFP (10 x 10 mm) - same 64-TQFP (10 x 10 mm) - same
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Core ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC ARM Cortex-M3, 32-bit RISC
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 8 kB (8K x 8) 16 kB (2x more) 8 kB (8K x 8) - identical 32 kB (4x more) 64 kB (8x more) 8 kB (8K x 8) - identical
SRAM 2 kB 2 kB 2 kB 2 kB 2 kB 2 kB
Digital I/O Pins 53 53 53 53 53 53
Supply Voltage 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V
Timers 2 x 16-bit 2 x 16-bit 2 x 16-bit 2 x 16-bit 2 x 16-bit 2 x 16-bit
Hardware Encryption AES accelerator AES accelerator AES accelerator AES accelerator AES accelerator AES accelerator
Integrated Operational Amplifiers 3 3 3 3 3 3

جیاکەرەوە سەرەکییەکان

  • Same 64-pin TQFP footprint across the whole Flash ladder, so memory upgrades need no PCB change (بەراورد بەEFM32TG232F64-QFP64T)
  • Three integrated operational amplifiers eliminate external discrete op-amp stages (بەراورد بەEFM32TG232F8-D-QFP64)
  • Exact-memory like-for-like substitution with a documented silicon revision path (بەراورد بەEFM32TG232F16-QFP64T)
  • Small 10 x 10 mm TQFP body with 53 usable I/O in a single package (بەراورد بەEFM32TG232F8-QFP64)

تێبینییەکانی دیزاین

Estimated: average current is dominated by sleep current plus the wake-up duty cycle, not by the 32 MHz core. If the device sleeps at 2 uA and wakes for 1 ms every second at roughly 6 mA average active current, the average is about 2 uA + (0.001 s x 6 mA) per second = roughly 8 uA. Budget the supply for wake-up transients by placing a bulk ceramic capacitor near the supply pins and a high-frequency bypass capacitor on the internal decoupling output, following the Silicon Labs reference layout for the DECOUPLE pin.

Keep the 53 digital I/O traces short and away from the analog inputs served by the three integrated op-amps. Route the analog nets as a quiet, contiguous group on one board region with a solid ground reference, and keep switching outputs (relay, LED PWM, triac drive) on the opposite side of the package so their edges do not couple into the op-amp inputs. A solid ground plane under the TQFP body is essential, since 53 of 64 leads carry signals and the remaining leads handle power and ground.

The most common mistake with this device is underestimating the 8 kB Flash and 2 kB SRAM budget. A vendor stack, bootloader, or logging buffer will exhaust memory long before CPU speed becomes a problem. Second, do not assume an identical-looking EFM32TG842 or EFM32G part is interchangeable: only EFM32TG232 devices in the 64-pin TQFP package are pin-compatible. Third, check the silicon revision notice for EFM32TG Series 0, which documents a drop-in replacement part number for affected revisions.

Use the 64-pin TQFP (10 x 10 mm) footprint with 0.5 mm pitch and follow the manufacturer pin configuration table when assigning nets; the exposed thermal function on this package is absent, so thermal relief relies on the ground pins and copper pour around the body. Provide at least two ground pins per supply island and star-route the analog ground return to the op-amp section rather than daisy-chaining it through the digital return path.

The hardware AES accelerator allows encrypted links to run at low energy cost, but the radio or switching stage beside the MCU usually dominates emissions. Keep the antenna or power-stage return currents out of the MCU ground reference by using a dedicated ground region under the RF or driver section, and place the AES-enabled communications burst away from sensitive analog front ends to prevent fast digital edge currents from appearing as noise on the op-amp inputs.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS compliance is indicated on distributor product listings for this part. AEC-Q100 qualification is not claimed for this industrial/consumer Tiny Gecko device. REACH, lead-free, halogen-free and conflict-minerals declarations are not stated for this ordering code; request the latest material compliance report through the Request a Quote form.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

EFM32TG232F8-QFP64T EFM32TG232F8-QFP64T datasheet EFM32TG232F8-QFP64T datasheet pdf EFM32TG232F8-QFP64T pinout EFM32TG232F8-QFP64T footprint EFM32TG232F8-QFP64T equivalent EFM32TG232F8-QFP64T replacement EFM32TG232F8-QFP64T vs EFM32TG232F16-QFP64T EFM32TG232F8-QFP64T price EFM32TG232F8-QFP64T stock Silicon Labs EFM32TG232F8-QFP64T EFM32TG232 32MHz Cortex-M3 8KB flash EFM32TG232 low power sensor node EFM32TG232 TQFP-64 53 GPIO microcontroller what can replace EFM32TG232F8-QFP64T

پێکهاتە و زاراوە پەیوەندیدارەکان

Silicon Labs EFM32TG232F8-QFP64T EFM32TG232F16-QFP64T EFM32TG232F32-QFP64T EFM32TG232F64-QFP64T EFM32TG232F8-D-QFP64 EFM32TG232F8-QFP64 ARM Cortex-M3 Tiny Gecko EFM32TG microcontroller MCU 32-bit RISC processor embedded microcontroller semiconductor hardware AES accelerator operational amplifier 16-bit timer low-power mode fast wake-up time TQFP-64 TQFP package family surface mount SMD RoHS AEC-Q100 2.5 V / 3.3 V supply 8 kB Flash 2 kB SRAM 53 digital I/O pins 32 MHz 2.5 V / 3.3 V rail battery-powered IoT node industrial condition monitoring energy metering portable medical device LED lighting control smart home controller
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ