Silicon Labs

EFM32TG232F32-QFP64T - 32MHz 32KB Flash MCU | Silicon Labs

MPN: EFM32TG232F32-QFP64T ✓ Active
1.85 V to 3.8 V Vdss 64-TQFP, 10 mm x 10 mm Package 32 MHz Speed 32 KB Memory
MOQ: 1 |

EFM32TG232F32-QFP64T Overview

The Silicon Labs EFM32TG232F32-QFP64T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 4 KB of RAM, and 53 digital I/O pins in a 64-TQFP 10 mm × 10 mm package. The device combines a compact 32-bit architecture with energy-saving modes and fast wake-up behavior for embedded systems that must balance processing performance, board area, and power consumption.

An ARM Cortex-M3 microcontroller is a 32-bit embedded processor based on the Arm Cortex-M architecture. Within the product hierarchy, this MCU integrates processor core, nonvolatile Flash, volatile RAM, GPIO, timers, analog peripherals, communications interfaces, and low-power control into one programmable device. The EFM32 Tiny Gecko family is intended for energy-sensitive applications in which compact code execution and deterministic peripheral behavior are important.

The EFM32TG232F32-QFP64T provides 32 KB of Flash for firmware and 4 KB of SRAM for working data. Its peripheral set includes two 16-bit timers, AES hardware, and three operational amplifiers, according to the manufacturer listing. A maximum clock speed of 32 MHz supports responsive control loops, while the 53 digital I/O pins allow multiple sensors, actuators, communications links, and human-interface connections without requiring a large external peripheral set.

The Tiny Gecko platform emphasizes low-energy operation through sleep and deeper shutdown-related operating modes. Fast wake-up capability is particularly useful in duty-cycled systems that spend most of their operating time inactive. The MCU therefore supports both conventional embedded workloads and applications where battery life is determined by average rather than peak processing demand.

Typical uses include industrial sensing nodes, compact environmental monitors, connected building equipment, battery-powered instrumentation, and embedded control modules. Its combination of 53 I/O pins, analog resources, and compact package is useful when the design needs several mixed-signal functions without adding large programmable logic devices. The three operational amplifiers can support local analog conditioning, while AES hardware can accelerate protected data handling when the application requires cryptographic acceleration.

PCB planning should preserve access to all 64 package leads and provide clean return paths for analog and digital signals. The TQFP footprint requires adequate lead spacing for assembly, and power-distribution traces should be sized for the selected operating mode and external load. Use the manufacturer pin-description table when assigning board nets, especially for power, ground, reset, and peripheral multiplexing functions.

This page organizes the device’s core specifications, package details, selection guidance, application guidance, and same-footprint migration options into a compact engineering reference. It also distinguishes exact MPN characteristics from options that require firmware, peripheral, or qualification review before they can be treated as production replacements.

Drop-in alternatives for EFM32TG232F32-QFP64T — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with EFM32TG232F32-QFP64T (same form factor and footprint) — differing in Package, Flash Memory, Series, Timers, Digital I/O Pins.

Silicon Labs
Package: 64-TQFP (10 x 10 mm)
Series: EFM32 Gecko
Digital I/O Pins: 53
Compare with EFM32TG232F32-QFP64T →
Silicon Labs
Package: 64-TQFP (10 mm x 10 mm)
Flash Memory: 16 kB
Timers: 2 x 16-bit timers
Compare with EFM32TG232F32-QFP64T →
Silicon Labs
Package: 64-TQFP (10 x 10 mm)
Flash Memory: 16 kB (16K x 8)
Timers: 2 x 16-bit timers
Compare with EFM32TG232F32-QFP64T →
Silicon Labs
Package: 64-pin TQFP, 10 mm × 10 mm
Timers: 2 × 16-bit timers
Compare with EFM32TG232F32-QFP64T →
Silicon Labs
Package: 64-TQFP (10 x 10 mm)
Flash Memory: 8 kB (8K x 8)
Series: EFM32TG
Compare with EFM32TG232F32-QFP64T →

EFM32TG230F32-QFP64

✅ Drop-In ⚠️ Specs Unverified
📦 TQFP-64
Shares the 32 MHz Cortex-M3, 32 KB Flash, and 4 KB RAM class, while the TG230 peripheral mix differs; exact I/O and analog-function differences require pin-table review.

📋 Reference alternative (not in catalog)

EFM32TG231F32-QFP64

✅ Drop-In ⚠️ Specs Unverified
📦 TQFP-64
Shares the 32 MHz Cortex-M3, 32 KB Flash, and 4 KB RAM class, while the TG231 peripheral and I/O configuration differs from the TG232 by family-specific device features.

📋 Reference alternative (not in catalog)

EFM32TG232F16-QFP64

✅ Drop-In
Silicon Labs
📦 TQFP-64
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32-bit RISC · 32 MHz · 16 kB · 16K x 8 · 4 kB

Contact for price

View Datasheet →

EFM32TG842F32-QFP64T

✅ Drop-In
📦 TQFP-64
Retains a 32 MHz 32-bit MCU and 32 KB Flash in a 64-pin QFP, while the TG842 family provides different family-specific peripherals and configuration requirements.

📋 Reference alternative (not in catalog)

EFM32TG232F32-QFP64T Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB
RAM 4 KB
Digital I/O Pins 53 pins
Timer Configuration 2 x 16-bit timers
Cryptographic Accelerator AES hardware
Operational Amplifiers 3 amplifiers
Supply Voltage Range 1.85 V to 3.8 V
Package 64-TQFP, 10 mm x 10 mm
Mounting Type Surface mount
Core Architecture ARM Cortex-M3
Series EFM32 Tiny Gecko
Packaging Option Tray

EFM32TG232F32-QFP64T 64-tqfp, 10 mm x 10 mm Pin Configuration Guide

Pin configuration for EFM32TG232F32-QFP64T (64-tqfp, 10 mm x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

64-tqfp, 10 mm x 10 mm package pinout diagram for EFM32TG232F32-QFP64T

No detailed pinout data available for EFM32TG232F32-QFP64T.

Refer to the datasheet for full pin configuration.

Typical Applications

EFM32TG232F32-QFP64T is suitable for 6 applications: Industrial Sensor Nodes, Battery-Powered Environmental Monitoring, Compact Instrumentation Control, Connected Building Equipment, Secure Embedded Accessories, Low-Power Condition Monitoring.

🏭

Industrial Sensor Nodes

The EFM32TG232F32-QFP64T fits industrial sensor nodes that combine frequent sampling with long idle periods between measurements. Its 32 MHz ARM Cortex-M3 core supports responsive local processing, while the Tiny Gecko platform provides energy-saving modes and fast wake-up behavior for duty-cycled operation. With 53 digital I/O pins, two 16-bit timers, and three operational amplifiers, the MCU can connect sensors, perform local signal conditioning, and manage actuator or communications interfaces without extensive external logic. The 1.85 V to 3.8 V operating range also supports compact low-power industrial designs, although the designer should calculate average current, wake-up frequency, and sensor standby demand rather than relying only on active-mode power.

🧩

Battery-Powered Environmental Monitoring

The EFM32TG232F32-QFP64T is appropriate for battery-powered environmental monitors because it combines low-energy operating modes with enough processing capability for local filtering and data preparation. Its 32 KB Flash stores firmware, and its 4 KB RAM supports sampling, buffering, and stack requirements for a compact monitor. Three operational amplifiers can assist with sensor conditioning close to the source, reducing sensitivity to noise introduced by long analog traces. Two 16-bit timers support periodic sampling and communication scheduling. The practical benefit is lower duty-cycle overhead because the Cortex-M3 core can process measurements quickly and return to a low-energy state; battery life still depends on sensor load, wake frequency, radio activity, and regulator quiescent current.

🔧

Compact Instrumentation Control

The EFM32TG232F32-QFP64T can serve as the control processor in compact instrumentation because it combines a 32 MHz ARM Cortex-M3 core, 53 digital I/O pins, two 16-bit timers, and three operational amplifiers in one 64-TQFP device. The timers can organize sampling, trigger, and timeout functions, while the amplifiers can support gain, buffering, or filtering stages when the signal path permits. Its 32 KB Flash and 4 KB RAM are suitable for focused embedded control rather than large applications. The 10 mm × 10 mm package helps limit board area, but high-resolution analog and digital circuitry still need careful partitioning. A key design consideration is that the internal MCU resources are shared with GPIO and multiplexed peripheral functions, so every assigned pin must be checked against the intended peripheral channel.

🌐

Connected Building Equipment

The EFM32TG232F32-QFP64T is suitable for connected building equipment requiring flexible I/O, local timing, and compact low-power control. Its 53 digital I/O pins can serve digital sensors, alarm inputs, indicator outputs, and communications transceivers, while two 16-bit timers support periodic measurement, debounce, or actuator timing. AES hardware adds a dedicated resource for applications that need cryptographic operations without assigning another processor. The 32 MHz Cortex-M3 core is sufficiently responsive for protocol handling and control logic, while the 32 KB Flash and 4 KB RAM keep the firmware footprint manageable. In a connected device, system-level power depends on how long the MCU remains awake and how frequently radio or sensor subsystems operate, so power-state design and peripheral isolation remain as important as the MCU’s nominal operating current.

🔐

Secure Embedded Accessories

The EFM32TG232F32-QFP64T can support secure embedded accessories that combine local control with protected data processing. Its AES hardware provides dedicated cryptographic acceleration, while the 32 MHz ARM Cortex-M3 core can execute communication, policy, and accessory-control functions. The three operational amplifiers offer opportunities for analog input conditioning close to sensors, and the 53 GPIO pins provide enough connection density for status indicators, user inputs, and external interfaces. With 32 KB Flash and 4 KB RAM, the MCU targets compact applications rather than large encrypted workloads. Security also depends on boot configuration, key storage, update procedures, and physical debug access; hardware AES alone does not establish the complete security posture of the finished product.

⚡

Low-Power Condition Monitoring

The EFM32TG232F32-QFP64T supports low-power condition monitoring by combining fast processing with flexible sleep behavior. The Cortex-M3 core can execute algorithms on acquired data at 32 MHz, allowing the product to return to a low-energy state before the next scheduled sample. Two 16-bit timers provide a basis for periodic acquisition and timing intervals, while three operational amplifiers can assist with conditioning transducer signals. The 53 I/O pins allow monitoring of multiple digital lines without requiring a large I/O expander. Because the MCU shares pins among GPIO and peripheral functions, the design should reserve pins carefully before PCB layout. Battery performance should be evaluated over the complete duty cycle, including sensor excitation, analog-settling time, communication bursts, and regulator losses.

Recommended Products Summary

EFM32TG842F32-QFP64T Same-brand 32 KB Flash QFP-64 migration candidate Used in: Industrial Sensor Nodes, Compact Instrumentation Control, Connected Building Equipment, Low-Power Condition Monitoring EFM32TG231F32-QFP64 Same-family low-power MCU candidate Used in: Industrial Sensor Nodes, Compact Instrumentation Control, Secure Embedded Accessories EFM32TG230F32-QFP64 Same-family energy-conscious MCU candidate Used in: Battery-Powered Environmental Monitoring, Connected Building Equipment, Low-Power Condition Monitoring EFM32TG232F16-QFP64 Silicon Labs Used in: Battery-Powered Environmental Monitoring, Secure Embedded Accessories
What is the EFM32TG232F32-QFP64T?
The EFM32TG232F32-QFP64T is a Silicon Labs 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz. According to the Silicon Labs product page and manufacturer datasheet, it provides 32 KB of Flash, 4 KB of RAM, 53 digital I/O pins, two 16-bit timers, AES hardware, and three operational amplifiers in a 64-TQFP 10 mm × 10 mm package. Its combination of mixed-signal peripherals and low-power operation makes it suitable for compact industrial, sensing, instrumentation, and embedded-control products.
What are the key specifications of EFM32TG232F32-QFP64T that engineers should know?
The EFM32TG232F32-QFP64T combines a 32 MHz ARM Cortex-M3 core with 32 KB of Flash, 4 KB of RAM, 53 digital I/O pins, two 16-bit timers, AES hardware, and three operational amplifiers. According to the Silicon Labs product page and manufacturer datasheet, the MCU operates from a 1.85 V to 3.8 V supply and is offered in a 64-TQFP 10 mm × 10 mm package. These figures define its processing, memory, mixed-signal, connectivity-peripheral, and board-space requirements before firmware and analog-support decisions are made.
Where can I download the EFM32TG232F32-QFP64T datasheet PDF?
The official EFM32TG232F32-QFP64T technical information is available from Silicon Labs through the manufacturer product page linked on this page. According to the Silicon Labs documentation system, the device belongs to the EFM32 Tiny Gecko family and includes a 32 MHz ARM Cortex-M3 core, 32 KB of Flash, and 4 KB of RAM. Open the manufacturer’s documentation resources for the revision-controlled datasheet, errata, reference manual, and peripheral documentation before releasing the hardware design.
Where is the EFM32TG232F32-QFP64T pinout located?
The EFM32TG232F32-QFP64T pinout is defined in the pin-description table of the Silicon Labs manufacturer datasheet. The device uses a 64-TQFP 10 mm × 10 mm package with 53 digital I/O pins, dedicated power and ground leads, reset functions, and multiplexed peripheral signals. Use that table for board-net assignment and verify alternate-function selections in the device-specific header files because a single physical lead can serve several peripheral functions depending on the configured port and peripheral state.
What is the supply voltage range of EFM32TG232F32-QFP64T?
The EFM32TG232F32-QFP64T operates from 1.85 V to 3.8 V. The manufacturer product specification identifies this supply range for the 32 MHz ARM Cortex-M3 MCU, while the listing also describes nominal 2.5 V and 3.3 V operating points. According to the Silicon Labs manufacturer datasheet, the design must keep every supply and bypass connection within the device’s documented limits. Confirm the precise operating conditions for the selected temperature grade and clock configuration before finalizing the power tree.
Is the EFM32TG232F32-QFP64T suitable for low-power sensor applications?
Yes, the EFM32TG232F32-QFP64T is suitable for low-power sensor applications because its Tiny Gecko platform includes energy-saving modes, fast wake-up behavior, and a 32 MHz ARM Cortex-M3 core. According to the Silicon Labs product page, the MCU combines 32 KB of Flash, 4 KB of RAM, 53 I/O pins, two 16-bit timers, and three operational amplifiers. These resources allow a compact node to acquire sensor data, condition local analog signals, perform secure processing, and sleep between measurements.
What can replace the EFM32TG232F32-QFP64T?
The closest same-footprint migration candidates are EFM32TG230F32-QFP64, EFM32TG231F32-QFP64, and EFM32TG842F32-QFP64, although none is an unconditional substitution. According to the Silicon Labs EFM32 pin-compatibility information, compatibility depends on the device category, package, and pin configuration in the part numbering system. Check the complete pin tables, peripheral availability, memory requirements, clock setup, and firmware startup files before replacing EFM32TG232F32-QFP64T in an existing design.
Can EFM32TG842F32-QFP64T replace EFM32TG232F32-QFP64T?
EFM32TG842F32-QFP64T can serve as a migration candidate because it is listed with 32 KB of Flash and a 64-pin QFP package, but it should not be treated as an automatic drop-in replacement. According to the comparison data, both devices use 32-bit MCU technology and provide 32 KB of Flash, while their family-specific peripherals and configuration requirements must be checked. Review pin multiplexing, supply behavior, clock initialization, peripheral equivalents, and bootloader compatibility before production substitution.
EFM32TG232F32-QFP64T vs EFM32TG842F32-QFP64T: which is better for an industrial controller?
EFM32TG232F32-QFP64T is generally the safer baseline for a Tiny Gecko-based design, while EFM32TG842F32-QFP64T should be selected only when its family-specific peripherals justify the migration. According to the manufacturer information, both candidates are 32-bit MCUs with 32 KB of Flash and 64-pin QFP packaging. The decisive factors are exact pin compatibility, available timers and communication peripherals, analog resources, power-management behavior, and the effort required to port and qualify existing firmware.
When should I choose EFM32TG232F32-QFP64T over EFM32TG231F32-QFP64?
Choose EFM32TG232F32-QFP64T when the design specifically needs its documented set of 53 digital I/O pins, two 16-bit timers, three operational amplifiers, AES hardware, 32 KB of Flash, and 4 KB of RAM. According to the Silicon Labs manufacturer datasheet, EFM32TG231F32 belongs to the same Tiny Gecko family but is a different device variant. Select the older or lower-feature variant only after confirming that its pins and peripherals satisfy the complete board requirements.
Is EFM32TG232F32-QFP64T suitable for a mixed-signal control board?
Yes, the EFM32TG232F32-QFP64T fits mixed-signal control boards that need local analog conditioning alongside embedded logic. According to the manufacturer listing, the MCU includes three operational amplifiers, 53 digital I/O pins, two 16-bit timers, AES hardware, 32 KB of Flash, and 4 KB of RAM. Its 1.85 V to 3.8 V supply range and 64-TQFP footprint support compact industrial, instrumentation, sensor, and control designs, provided the PCB separates sensitive analog routing from switching and high-current paths.
Where can I buy EFM32TG232F32-QFP64T online?
Use the Request a Quote form on this page to request EFM32TG232F32-QFP64T availability, current pricing, and order handling. The exact MPN is a Silicon Labs 64-TQFP microcontroller with a 32 MHz ARM Cortex-M3 core, 32 KB of Flash, and 4 KB of RAM. The trailing T identifies the tray packaging option, so confirm that the ordered package and termination match the PCB assembly process before releasing a purchase order.
What is the price of EFM32TG232F32-QFP64T?
The current unit price for EFM32TG232F32-QFP64T is available through the Request a Quote form on this page. Pricing can depend on order quantity, package form, and current component availability. The device is a Silicon Labs 32 MHz ARM Cortex-M3 MCU with 32 KB of Flash and 4 KB of RAM in a 64-TQFP 10 mm × 10 mm package, so the request should identify the full EFM32TG232F32-QFP64T MPN rather than only the EFM32TG232F32 base device.
What is the lead time and stock status for EFM32TG232F32-QFP64T?
Request the current stock position, minimum order quantity, and lead time for EFM32TG232F32-QFP64T through the Request a Quote form on this page. According to the manufacturer product information, this is an ARM Cortex-M3 MCU with a 32 MHz maximum clock, 32 KB of Flash, 4 KB of RAM, and 53 I/O pins in a 64-TQFP package. Supply commitments should be requested against the complete ordering code, including the T suffix that denotes tray packaging.
Is EFM32TG232F32-QFP64T in stock?
The current EFM32TG232F32-QFP64T stock status should be confirmed through the Request a Quote form on this page. The exact ordering code identifies a Silicon Labs tray-packaged 64-TQFP MCU with a 32 MHz ARM Cortex-M3 core, 32 KB of Flash, 4 KB of RAM, and 53 digital I/O pins. For production planning, provide the required quantity, assembly packaging, target delivery date, and any traceability requirements so the response can reflect the correct configuration.

Engineering reference data for EFM32TG232F32-QFP64T — comparison, design guidance, and compliance information.

Selection Guide

Choose EFM32TG232F32-QFP64T when a design requires the exact combination of a 32 MHz ARM Cortex-M3 core, 32 KB of Flash, 4 KB of RAM, 53 digital I/O pins, two 16-bit timers, AES hardware, three operational amplifiers, and a 64-TQFP footprint. It is particularly appropriate for compact mixed-signal products that rely on low-energy modes and fast wake-up behavior. Consider EFM32TG230F32-QFP64 or EFM32TG231F32-QFP64 only after confirming that their exact pin and peripheral configuration satisfies the board. EFM32TG232F16-QFP64 offers the same family and 64-pin format but reduces Flash from 32 KB to 16 KB, so firmware capacity must be checked carefully. EFM32TG842F32-QFP64T retains 32 KB of Flash and 64-pin QFP packaging, but it belongs to a different MCU family and requires firmware, pin-function, clock, and peripheral validation. For any migration, review the manufacturer pin tables, device header files, startup routines, and peripheral requirements before production release.

Comparison with Alternatives

Parameter This Product EFM32TG230F32-QFP64 EFM32TG231F32-QFP64 EFM32TG232F16-QFP64 EFM32TG842F32-QFP64T
Package TQFP-64, 10 mm x 10 mm TQFP-64 TQFP-64 TQFP-64 TQFP-64
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 32 KB 16 KB 32 KB

Key Differentiators

  • Broader documented digital I/O allocation (vs EFM32TG232F16-QFP64)
  • Matches the 32 KB Flash class while retaining the 64-pin QFP footprint (vs EFM32TG842F32-QFP64T)
  • Native Tiny Gecko migration path with matching memory class (vs EFM32TG231F32-QFP64)
  • Operational-amplifier integration reduces mixed-signal board overhead (vs EFM32TG230F32-QFP64)

Design Notes

Budget the complete sleep-and-measure cycle rather than only active-mode current. The device supports low-energy modes and fast wake-up, but battery life also depends on sensor excitation, analog settling, communications activity, and regulator quiescent current. Place the MCU, analog circuitry, and any radio into separate power domains when the load is dominated by intermittent measurements. Confirm wake sources and retention requirements in the manufacturer datasheet before selecting deep-sleep modes for state that must survive between samples.

Use the TQFP-64 land pattern and pin numbering from the manufacturer package drawing without shifting or rotating the footprint. The package is 10 mm × 10 mm and includes 53 digital I/O pins alongside power, ground, reset, and other functions. Verify lead assignments against the device-specific pin table because peripheral multiplexing can change the permitted use of individual leads. Provide short, direct supply and ground connections, and place required bypass capacitors close to their associated package pins.

Separate sensitive analog paths from digital switching and communication return currents. The three internal operational amplifiers can shorten analog signal paths, but their inputs, outputs, and grounding still need a controlled layout. Keep sensor traces short, avoid routing them beneath switching nodes, and provide a quiet ground reference. If the board combines the MCU with wireless or power-conversion circuitry, use controlled partitioning and grounding to prevent common-impedance coupling from degrading measurement and control accuracy.

Do not treat a shared package as proof of identical behavior. For any migration among EFM32TG230, EFM32TG231, EFM32TG232, EFM32TG232F16, and EFM32TG842 devices, compare pin multiplexing, memory capacity, peripheral availability, clock initialization, interrupt assignments, startup code, and package termination. EFM32TG232F16 provides 16 KB rather than 32 KB of Flash, and family changes can alter which functions appear on specific leads. Rebuild the firmware image and qualify the assembled board before production use.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status is unknown because no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. Confirm the current declarations from the manufacturer’s product documentation or quality compliance records.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

EFM32TG232F32-QFP64T datasheet EFM32TG232F32-QFP64T specifications EFM32TG232F32-QFP64T pinout EFM32TG232F32-QFP64T price EFM32TG232F32-QFP64T stock Silicon Labs EFM32TG232F32-QFP64T EFM32TG232F32-QFP64T equivalent EFM32TG232F32-QFP64T replacement EFM32TG232F32-QFP64T vs EFM32TG842F32-QFP64T EFM32TG232F32 32MHz Cortex-M3 EFM32TG232F32-QFP64 low power application TQFP-64 EFM32TG232F32 pinout

Related Components & Terms

Silicon Labs EFM32TG232F32-QFP64T EFM32TG232F32 EFM32TG230F32-QFP64 EFM32TG231F32-QFP64 EFM32TG232F16-QFP64 EFM32TG842F32-QFP64T ARM Cortex-M3 ARM Cortex-M architecture 32-bit microcontroller EFM32 Tiny Gecko embedded microcontroller low-power microcontroller energy-saving mode fast wake-up 32 KB Flash 4 KB RAM 53 digital I/O pins AES hardware operational amplifier 16-bit timer TQFP-64 surface mount industrial sensor node battery-powered instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details