EFM32TG842F8-QFP64T - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG842F8-QFP64T ✓ چالاکEFM32TG842F8-QFP64T گشتی
An ARM Cortex-M3 microcontroller is a 32-bit embedded processor built around the ARM instruction set and designed for control-oriented applications. The EFM32 Tiny Gecko family combines the Cortex-M3 core with autonomous peripherals, energy-saving modes, fast wake-up behavior, LCD support, AES hardware, and analog resources. Within the embedded semiconductor hierarchy, this device belongs to the microcontroller, embedded processor, and energy-efficient IoT device-control categories.
Key device attributes include a maximum clock frequency of 32 MHz, 8 kB of Flash, 2 kB of RAM, 53 digital I/O pins, two 16-bit timers, AES support, LCD capability, and three operational amplifiers. A 1.85 V to 3.8 V supply range permits operation from a regulated 3 V rail or a suitable low-voltage battery arrangement, subject to the detailed power-system requirements in the manufacturer datasheet.
The Tiny Gecko architecture is intended to reduce processing overhead by allowing peripherals to perform routine tasks independently of the CPU. Low-energy techniques and sleep modes are especially useful in battery-powered products where the MCU must alternate between short active intervals and long low-power intervals. The family data sheet also identifies low Stop-mode consumption and approximately 150 uA/MHz Run-mode consumption as platform characteristics, while exact operating conditions must be evaluated for the selected package and operating configuration.
Typical uses include low-power sensor nodes, compact industrial monitoring equipment, connected IoT controls, small LCD instruments, security-equipped portable products, and embedded consumer devices. AES hardware can support encrypted data transfer or protected firmware workflows, while the integrated op-amps and LCD interface reduce the need for separate components in compact systems.
PCB design should preserve short, quiet analog connections around the operational amplifiers and place decoupling capacitance close to the supply pins. Confirm the exact pin assignments, exposed pad requirements, and power-entry sequence in the manufacturer pinout and application information before layout release. This page combines manufacturer specifications, application guidance, and replacement analysis for faster engineering review.
جێگرەوەکانی جێگۆڕکێ بۆ EFM32TG842F8-QFP64T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EFM32TG842F8-QFP64T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, RAM, Architecture, Low-Power Features.
EFM32TG842F8-QFP64
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG842F8-D-QFP64
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EFM32TG842F8-QFP64T زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 8 kB |
| RAM | 2 kB |
| Digital I/O Pins | 53 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.85 V to 3.8 V |
| پاکێج | 64-TQFP (10 mm x 10 mm) |
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit |
| Encryption Support | AES |
| LCD Support | 8 x 18 LCD |
| Operational Amplifiers | 3 |
| Low-Power Design Features | Low-energy modes and fast wake-up |
| Stop Mode Current | 0.6 uA |
| Run Mode Current | 150 uA/MHz |
ڕێنمایی ڕێکخستنی پینی EFM32TG842F8-QFP64T 64-tqfp (10 mm x 10 mm)
ڕێکخستنی پین بۆ EFM32TG842F8-QFP64T (پاکێجی 64-tqfp (10 mm x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EFM32TG842F8-QFP64T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EFM32TG842F8-QFP64T گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Node, Compact LCD Instrument, Secure Connected IoT Controller, Industrial Process Monitor, Portable Consumer Accessory, Low-Power Data Acquisition Module.
Battery-Powered Sensor Node
EFM32TG842F8-QFP64T fits a battery-powered sensor node that periodically measures an analog quantity and then returns to a low-power state. Its ARM Cortex-M3 core operates up to 32 MHz, while the Tiny Gecko platform supports fast wake-up behavior and low-energy operating techniques. The three integrated operational amplifiers can condition low-level sensor signals without requiring three separate amplifier packages. With 8 kB Flash, 2 kB RAM, and 53 digital I/O pins, the MCU can also manage a sensor interface, status indicators, and a low-power communications controller. System-level battery-life calculations should include sensor conversion time, radio transmission intervals, regulator efficiency, and the MCU operating mode used between measurements.
پێشنیارکراو
Compact LCD Instrument
EFM32TG842F8-QFP64T is suitable for a compact measurement instrument with an 8 x 18 LCD and local controls. The LCD-oriented MCU configuration reduces the need for a separate display controller in a simple instrument, while the 53 digital I/O pins provide connections for buttons, status indicators, and external sensors. The three op-amps can support analog front-end stages close to the MCU, helping reduce noise pickup and board area. Its 32 MHz Cortex-M3 core provides responsive control and serial communications, and 2 kB RAM supports a modest display and data-processing workload. Layout should isolate sensitive analog routing, follow the recommended decoupling arrangement, and validate LCD timing and segment mapping with the manufacturer peripheral documentation.
پێشنیارکراو
Secure Connected IoT Controller
EFM32TG842F8-QFP64T can serve as the low-power controller in a connected IoT product that requires encrypted communication or protected device transactions. Its hardware AES support provides an efficient cryptographic resource without relying on software-intensive encryption for every data block. The 32 MHz ARM Cortex-M3 core can coordinate communications, local inputs, and sensor acquisition, while fast wake-up behavior helps the product respond without remaining continuously active. The device includes 53 digital I/O pins for sensors, indicators, and external interfaces. Product designers should still define secure boot, key provisioning, update procedures, and debug-access controls at the system level, since the integrated AES block addresses cryptographic operations rather than the entire device security architecture.
پێشنیارکراو
Industrial Process Monitor
EFM32TG842F8-QFP64T is a practical fit for compact industrial process monitoring equipment where multiple sensor inputs, local indication, and low standby consumption are important. The three integrated op-amps can support conditioning stages for low-energy sensor signals, while 53 digital I/O pins leave capacity for digital sensors, alarm outputs, and control signals. Its two 16-bit timers support periodic sampling or control functions, and the 8 kB Flash provides space for a compact embedded application. The 1.85 V to 3.8 V operating range allows use with suitable regulated rails, provided input transients and grounding are handled by the wider system. Production designs should include calibration storage, fault detection, and brownout behavior appropriate to the monitored process.
پێشنیارکراو
Portable Consumer Accessory
EFM32TG842F8-QFP64T suits a portable accessory that combines touch or button input, status indication, and a power-conscious embedded control function. The three op-amps can support analog sensing or signal conditioning, and the 53 digital I/O pins allow connection of controls and indicators without requiring a large I/O expander. Low-energy operating techniques and fast wake-up behavior are valuable in products that spend most of their time idle between user interactions. The 2 kB RAM is suitable for compact buffering but should be checked against display, protocol, and logging requirements before committing to the design. Mechanical assembly, human-interface safety, battery protection, and ESD design remain system responsibilities, and the QFP64 package requires careful handling during rework.
پێشنیارکراو
Low-Power Data Acquisition Module
EFM32TG842F8-QFP64T can form the core of a small data-acquisition module that periodically samples inputs and stores or forwards results. The ARM Cortex-M3 processor runs up to 32 MHz, while two 16-bit timers can support periodic sampling and timing functions. Three on-chip op-amps reduce the analog component count for low-level signal conditioning, and 2 kB RAM can support a short acquisition buffer. Low Stop-mode current and fast wake-up behavior are useful when the module is powered intermittently. The 64-TQFP package provides a conventional surface-mount footprint, but the 10 mm by 10 mm body and exposed thermal-pad requirements must be coordinated with PCB assembly capability. Validate input bandwidth, ADC acquisition timing, reference accuracy, and thermal drift before defining the measurement accuracy.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EFM32TG842F8-QFP64T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EFM32TG842F8-QFP64 | EFM32TG842F8-D-QFP64 |
|---|---|---|---|
| Package | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 kB | 8 kB | 8 kB |
| RAM | 2 kB | 2 kB | 2 kB |
| Product Series | Tiny Gecko | Tiny Gecko | Tiny Gecko |
جیاکەرەوە سەرەکییەکان
- Same-footprint configuration without changing core resources (بەراورد بەEFM32TG842F8-QFP64)
- Three integrated operational amplifiers (بەراورد بەEFM32TG842F8-D-QFP64)
- Security and display resources for compact embedded products (بەراورد بەEFM32TG232F32-QFP64T)
تێبینییەکانی دیزاین
Place the input and output decoupling capacitors close to their associated supply pins, with the shortest practical ground-return paths. The Tiny Gecko platform supports low-power operation, so poor supply routing can create current transients and measurement errors that are difficult to distinguish from firmware problems. Use the manufacturer recommended capacitor values and follow the package-specific land pattern before releasing the PCB.
Route analog signals associated with the three internal op-amps away from fast-switching nodes, oscillator circuitry, and digital return currents. Keep the analog and digital ground strategy consistent with the manufacturer reference layout, and avoid long loops around sensitive inputs. Because the device can operate down to 1.85 V, verify that every external analog component and signal source remains within the complete operating range of the selected configuration.
Do not substitute another Tiny Gecko model solely because it uses a 64-TQFP package. Peripheral functions, alternate-function mappings, memory capacity, analog resources, and ordering codes can differ even when the mechanical footprint matches. Use the manufacturer pin-description table for EFM32TG842F8-QFP64T, and confirm programming, boot, debug, and assembly requirements before approving a substitution.
Estimated: average current can be approximated as I_run multiplied by the active duty cycle plus I_stop multiplied by the inactive duty cycle. For example, using 150 uA/MHz Run-mode consumption at 32 MHz gives 4.8 mA during Run, before peripheral and I/O effects. Multiplying that active current by the measured duty cycle and adding Stop-mode current gives a system-level MCU estimate that should be checked against datasheet operating-mode conditions.
زانیاری پابەندبوون
Compliance status requires confirmation from the current manufacturer product declaration or customer-specific procurement documentation.