Altera

EP4CE10F17A7N - 10,320-Cell AEC-Q100 FPGA | Altera

MPN: EP4CE10F17A7N ✓ چالاک
1.2 V Vdss FBGA-256 (LBGA-256) Package 472.5 MHz Speed
MOQ: 1 |

EP4CE10F17A7N گشتی

Altera EP4CE10F17A7N is a Cyclone IV E field-programmable gate array with 10,320 logic elements, 645 configurable logic blocks, 179 I/O, and a maximum operating frequency of 472.5 MHz. The device uses a 1.2 V supply and is packaged in a 256-ball FBGA measuring 17 x 17 mm with 1 mm ball pitch. The A7 suffix identifies an automotive-oriented ordering option, and the device is associated with AEC-Q100 qualification.

A field-programmable gate array is a reconfigurable digital semiconductor within the FPGA and CPLD product family. Unlike a fixed-function application-specific integrated circuit, an FPGA combines programmable logic, memory blocks, and general-purpose I/O in one device. This architecture allows interface protocols, parallel data paths, control logic, and signal processing to be implemented in parallel while retaining hardware reprogrammability.

The EP4CE10F17A7N combines 423,936 logic elements, 179 I/O, and 645 CLBs in the EP4CE10 device family. Its 472.5 MHz maximum operating frequency provides useful timing headroom for control, communications, instrumentation, and embedded processing systems. The 1.2 V core supply supports power-conscious designs, while the automotive-oriented ordering code supports applications requiring controlled environmental qualification.

Cyclone IV E devices use a programmable-logic fabric containing logic elements grouped into CLBs. This structure supports parallel datapaths, finite-state machines, counters, protocol bridges, and control engines without requiring a separate ASIC fabrication run. The device also supports a broad mix of user I/O, allowing external memory, converters, transceivers, and industrial interfaces to be connected through the same programmable device.

Typical uses include industrial automation, automotive electronic control units, communications infrastructure, test and measurement systems, and embedded control platforms. Its 179 I/O count is useful for parallel sensor acquisition, while its programmable architecture allows product variants and firmware-driven control sequences to share the same hardware platform.

PCB implementation requires careful ball assignment, multilayer routing, and clean power delivery to the 1.2 V core and related supply rails. Validate the selected configuration against the device pinout, bank voltage requirements, decoupling guidance, and Quartus device-support files before releasing the PCB.

This product record combines the exact EP4CE10F17A7N configuration data with orderable-part identification, qualification context, pin-compatible comparison guidance, and design-focused information for engineers evaluating Cyclone IV E FPGA implementations.

جێگرەوەکانی جێگۆڕکێ بۆ EP4CE10F17A7N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP4CE10F17A7N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Mounting Type, Device Type, Logic Elements, Process Technology.

Altera
Package: 256-pin LBGA
Logic Elements: 10,320 LE
Process Technology: 60 nm
بەراوردکردن لەگەڵ EP4CE10F17A7N →
Altera
Device Type: Field Programmable Gate Array (FPGA)
Logic Elements: 10,320 LE
Process Technology: 60 nm
بەراوردکردن لەگەڵ EP4CE10F17A7N →
Intel
Package: FBGA-256 (256-LBGA), 17 x 17 mm, 1.0 mm pitch
Mounting Type: Surface Mount (BGA)
Process Technology: 60 nm, low-power
بەراوردکردن لەگەڵ EP4CE10F17A7N →

EP4CE10F17I7N

✅ جێگرەوەی ڕاستەوخۆ
Altera
📦 FBGA-256 (17 x 17 mm)
Cyclone IV E field-programmable gate array (FPGA) · 10,320 elements · 414 Kb · 179 I/O · 256-LBGA F17 · 17 mm × 17 mm · Grade 7 · Industrial

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EP4CE10F17C6N

✅ جێگرەوەی ڕاستەوخۆ
Altera
📦 FBGA-256 (17 x 17 mm)
Cyclone IV E field-programmable gate array (FPGA) · 10,320 LE · 179 I/O · 414 kbit · 1.2 V · 1.15 V · 60 nm · 256-pin LBGA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EP4CE10F17C7N

✅ جێگرەوەی ڕاستەوخۆ
Altera
📦 FBGA-256 (17 x 17 mm)
Field Programmable Gate Array (FPGA) · Cyclone IV E · 10,320 LE · 414 kbit · 47 · 179 I/O · 1.2 V · 60 nm

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EP4CE10F17A7N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type Cyclone IV E field-programmable gate array (FPGA)
Logic Elements 10,320 elements
Configurable Logic Blocks 645 CLBs
Logic Element Count 423,936 logic elements
Maximum Operating Frequency 472.5 MHz
I/O Count 179 I/O
Core Supply Voltage 1.2 V
Package Type FBGA-256 (LBGA-256)
Package Dimensions 17 x 17 mm
Ball Pitch 1 mm
Terminal Count 256 balls
جۆری دامەزراندن Surface mount
Automotive Qualification AEC-Q100
Lead-Free Status Lead-free

ڕێنمایی ڕێکخستنی پینی EP4CE10F17A7N 17 x 17 mm

ڕێکخستنی پین بۆ EP4CE10F17A7N (پاکێجی 17 x 17 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 17 x 17 mm بۆ EP4CE10F17A7N

هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP4CE10F17A7N.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

EP4CE10F17A7N گونجاوە بۆ 7 بەکارھێنانs: Automotive Electronic Control Units, Industrial Automation and Factory Control, Communications and Protocol Bridging, Test and Measurement Instrumentation, Audio and Signal Processing, Embedded Data Acquisition, Embedded Processor and Control Systems.

🚗

Automotive Electronic Control Units

The EP4CE10F17A7N fits automotive electronic control units that require programmable logic for sensor conditioning, actuator sequencing, and vehicle-network interface coordination. Its 10,320 logic elements and 179 I/O provide substantial parallel connectivity, while the 472.5 MHz maximum operating frequency supports demanding control and datapath logic. The device is associated with AEC-Q100 qualification, allowing it to serve as the programmable core of an automotive control platform. The implementation must still follow Altera's power, decoupling, clocking, and configuration recommendations, and each vehicle-level requirement must be validated independently.

🏭

Industrial Automation and Factory Control

The EP4CE10F17A7N is suitable for factory automation controllers that coordinate sensors, relays, motion logic, and operator interfaces. Its 645 CLBs and 423,936 logic elements allow multiple deterministic state machines and parallel data paths to operate in one FPGA, while 179 I/O support board-level connectivity. The 472.5 MHz maximum frequency provides margin for high-speed acquisition and protocol logic. In an industrial design, pay particular attention to isolated power domains, clock jitter, I/O voltage standards, thermal performance, and functional-safety requirements that extend beyond the device qualification itself.

🌐

Communications and Protocol Bridging

The EP4CE10F17A7N can implement parallel-to-serial protocol conversion, custom framing, clock recovery, and multiport traffic management within communications equipment. Its FPGA fabric provides flexibility for adapting evolving interface standards without a PCB respin, and 179 I/O allow the design to combine multiple buses and control channels. The 472.5 MHz maximum operating frequency supports timing-sensitive bit processing, although actual line rates are governed by I/O timing and external transceiver performance. Validate eye quality, reference-clock jitter, impedance control, shielding, and protocol compliance in the completed channel.

🔧

Test and Measurement Instrumentation

The EP4CE10F17A7N suits instrument front ends that need parallel acquisition, digital calibration, waveform processing, and low-latency control in one programmable device. Its 10,320 logic elements and 179 I/O support concurrent channels and control signals, while the 472.5 MHz maximum operating frequency supports timing-critical digital functions. Designers can implement filtering, decimation, triggering, and data packing directly in the FPGA rather than relying solely on a processor. Signal-chain accuracy still depends on suitable analog converters, clocking, isolation, grounding, and carefully controlled PCB layout.

🎧

Audio and Signal Processing

The EP4CE10F17A7N can implement digital filtering, sample-rate conversion, channel routing, and interface bridging for professional audio and communication equipment. Its parallel programmable architecture handles multiple audio channels efficiently and allows the same hardware to support several operating modes through configuration. The 179 I/O count is useful for synchronous digital audio interfaces and control signals, while the 472.5 MHz maximum operating frequency supports common low- to mid-rate processing pipelines. Keep clock and data routing short, maintain continuous return paths, and isolate switching regulators and high-current outputs to preserve signal integrity.

📊

Embedded Data Acquisition

The EP4CE10F17A7N fits embedded acquisition systems requiring parallel sensor inputs, digital filtering, event detection, and data formatting before transfer to a host processor. Its 645 CLBs and 179 I/O permit wide parallel buses and multiple acquisition channels, and its programmable fabric allows the sampling pipeline to be adjusted without changing hardware. The 472.5 MHz maximum operating frequency supports clocked filtering and real-time preprocessing. For dependable measurements, synchronize converter clocks to the FPGA, provide clean references, account for input-settling time, and verify timing closure with realistic constraints.

🖥️

Embedded Processor and Control Systems

The EP4CE10F17A7N can host soft processor cores alongside dedicated hardware accelerators for control, monitoring, and data movement. Programmable logic handles time-critical tasks while processor peripherals support configuration, diagnostics, and supervisory functions. Its 10,320 logic elements, 179 I/O, and 472.5 MHz maximum frequency are well suited to compact embedded control designs that need parallel hardware behavior without a full custom ASIC. Engineering teams should partition logic and embedded-processor resources carefully, reserve memory interfaces correctly, and use timing-constrained implementation to prevent critical paths from limiting system performance.

What are the key specifications of EP4CE10F17A7N that engineers should know?
The EP4CE10F17A7N is a 1.2 V Cyclone IV E FPGA with 10,320 logic elements, 645 CLBs, 179 I/O, and a 472.5 MHz maximum operating frequency. Altera identifies the package as 256-ball FBGA measuring 17 x 17 mm with 1 mm pitch. The ordering code is associated with automotive qualification and AEC-Q100, making the device suitable for control platforms requiring a qualified programmable-logic option.
What is the EP4CE10F17A7N?
The EP4CE10F17A7N is an Altera Cyclone IV E field-programmable gate array for configurable digital logic and parallel signal processing. It contains 423,936 logic elements organized into 645 CLBs, provides 179 I/O, operates from a 1.2 V core supply, and is offered in a 256-ball FBGA. Its programmable fabric allows designs to be updated without changing the PCB.
Where can I download the EP4CE10F17A7N datasheet PDF?
The official EP4CE10F17A7N product documentation is available through Altera's Cyclone IV E EP4CE10 F17 product page at https://www.altera.com/products/fpga/cyclone-iv/e/ep4ce10-f17/EP4CE10F17A7N. Use the manufacturer datasheet and device-support files for authoritative electrical limits, ball assignments, configuration requirements, and operating guidance. A separate third-party datasheet mirror should not replace the manufacturer documentation for design release.
Where can I find the EP4CE10F17A7N pinout?
Use the Altera EP4CE10 F17 device documentation and the package pinout associated with EP4CE10F17A7N to identify all 256 FBGA balls and their I/O-bank assignments. The product is identified as a 17 x 17 mm, 1 mm-pitch FBGA, but the complete numbered ball map is not reproduced on this page. Confirm every supply, ground, configuration, clock, and user-I/O connection against the current Altera pinout files before PCB routing.
What package does the EP4CE10F17A7N use?
The EP4CE10F17A7N uses a 256-ball FBGA package identified as LBGA-256 or FBGA-256 in product records. Its package measures 17 x 17 mm and uses a 1 mm ball pitch. Because this is a fine-pitch BGA, the PCB design must include via-in-pad or buried-via escape structures, ball-pad geometry, solder-mask design, and assembly constraints based on the package drawing.
Is the EP4CE10F17A7N automotive qualified?
The EP4CE10F17A7N ordering option is listed as automotive and associated with AEC-Q100 qualification. That qualification supports its use in automotive electronic control applications when all other device, process, and end-product requirements are satisfied. AEC-Q100 qualification applies to the device itself; it does not automatically qualify every module, firmware release, or vehicle-level assembly built with it.
What can replace the EP4CE10F17A7N?
EP4CE10F17I7N is the closest documented same-family alternative because it retains the EP4CE10 F17 identity and 256-ball FBGA format while changing the ordering suffix associated with qualification grade. A safe replacement still requires verification of temperature range, automotive qualification status, pin assignments, configuration compatibility, and Quartus support. EP4CE10F17C6N and EP4CE10F17C7N are functional alternatives with the same 179-I/O, 256-FBGA device identity but different ordering suffixes.
Can EP4CE10F17I7N replace EP4CE10F17A7N?
EP4CE10F17I7N can be considered as a pin-compatible migration candidate because it belongs to the same EP4CE10 F17 device and 256-ball FBGA family. The principal documented distinction is the ordering suffix, which reflects different grade positioning. Before replacing EP4CE10F17A7N, confirm whether the required temperature range and AEC-Q100 automotive qualification match the target design.
EP4CE10F17A7N vs EP4CE10F17C6N - which is better for automotive control?
EP4CE10F17A7N is the better documented choice for automotive control when AEC-Q100 qualification is required. EP4CE10F17C6N uses the same 179-I/O, 256-FBGA FPGA identity but has a different ordering suffix associated with device grade. Both can serve related programmable-logic roles, but qualification requirements, timing grade, temperature range, and design validation must be checked before substituting one for the other.
When should I choose EP4CE10F17A7N over EP4CE10F17I7N?
Choose EP4CE10F17A7N when the system requires the documented automotive-oriented ordering option and AEC-Q100 qualification. Choose EP4CE10F17I7N when its grade and environmental ratings satisfy the industrial design while retaining the same EP4CE10 F17 hardware identity. For either choice, verify the complete ordering-code decode, temperature range, lifecycle status, and Quartus device support.
Is EP4CE10F17A7N suitable for industrial automation and control systems?
The EP4CE10F17A7N is suitable for industrial automation and embedded control implementations that benefit from 10,320 logic elements, 179 I/O, and a 472.5 MHz maximum operating frequency. It can implement parallel control logic, sensor interfaces, protocol handling, and deterministic state machines. The automotive qualification context may exceed ordinary industrial requirements, but environmental ratings and functional-safety requirements still need separate verification.
How much power does the EP4CE10F17A7N consume?
The EP4CE10F17A7N operates from a 1.2 V core supply, but total power depends on the configured logic, I/O activity, switching rate, device speed grade, and ambient temperature. The 1.2 V value identifies the core voltage rather than a complete power-consumption specification. Use the Altera power-estimation workflow with the actual design utilization and activity factors, then add board-level regulator, inductor, and thermal margin.
Where can I buy EP4CE10F17A7N and check price and lead time?
Use the Request a Quote form on this page to request current EP4CE10F17A7N pricing, stock confirmation, lead time, and orderable packaging information. The form is the appropriate route for a firm quotation because FPGA availability can vary by lot and package. Provide your target quantity, assembly format, date code requirements, and destination country so the supplier can return an actionable quotation.
Is EP4CE10F17A7N in stock?
Stock status for EP4CE10F17A7N should be confirmed through the Request a Quote form on this page. The manufacturer product page and distributor listings identify the device and ordering option, but they do not constitute a guaranteed stock reservation. Submit the required quantity and packaging details to obtain current inventory, lot availability, lead time, and shipment options.
What is the lead time for EP4CE10F17A7N?
The current lead time for EP4CE10F17A7N is confirmed through the Request a Quote form on this page rather than stated as a fixed interval. FPGA lead time can depend on available wafer or finished-device inventory, selected package format, production allocation, and order quantity. Provide the required quantity and target delivery date to obtain a schedule suitable for production planning.

داتای سەرچاوەی ئەندازیاری بۆ EP4CE10F17A7N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose EP4CE10F17A7N when the design requires a Cyclone IV E FPGA with 10,320 logic elements, 179 I/O, a 472.5 MHz maximum operating frequency, and the documented automotive-oriented AEC-Q100 ordering option. It is particularly appropriate for automotive controllers, industrial platforms, communications equipment, and acquisition systems that benefit from parallel programmable logic. EP4CE10F17I7N is the logical first alternative when the same EP4CE10 F17 hardware is needed but the I7N grade better matches the environmental requirements. EP4CE10F17C6N and EP4CE10F17C7N preserve the 179-I/O, 256-FBGA identity but require careful review of speed, temperature, and qualification details. For every alternative, verify the exact ordering-code decode, Quartus device support, pin and bank assignments, timing reports, and lifecycle status before treating it as a drop-in replacement.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە EP4CE10F17I7N EP4CE10F17C6N EP4CE10F17C7N
Brand Altera Altera Altera Altera
Package FBGA-256 (17 x 17 mm) FBGA-256 (17 x 17 mm) FBGA-256 (17 x 17 mm) FBGA-256 (17 x 17 mm)
Device Family Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E

جیاکەرەوە سەرەکییەکان

  • Documented automotive ordering position (بەراورد بەEP4CE10F17I7N)
  • Complete 10,320-element device identity (بەراورد بەEP4CE10F17C6N)
  • 472.5 MHz maximum operating frequency (بەراورد بەEP4CE10F17C7N)

تێبینییەکانی دیزاین

Treat the 1 mm-pitch, 256-ball FBGA as a fine-pitch assembly problem. Use the Altera package drawing to define solder-mask openings, pad diameters, and PCB finish requirements. Provide fanout vias beneath or adjacent to escape balls, maintain a continuous ground reference beneath the device, and validate assembly yield with the selected board stackup. Do not derive land patterns from the 17 x 17 mm body size alone.

Separate the 1.2 V core rail from other supply requirements identified in the device documentation. Place high-frequency decoupling close to the relevant power and ground balls, use multiple distributed connections to reduce plane inductance, and keep switching-regulator loops away from sensitive clock and I/O routing. Power-loss sequencing, ramp time, and configuration behavior must be checked against the supported operating sequence before power-up testing.

Estimate junction temperature from the actual configured logic activity and I/O loading rather than a nominal device value alone. Include core power, I/O power, configuration-current behavior, and the power dissipated by the PCB in the thermal model. Use the package thermal data and the board's copper area to determine whether a thermal via array or additional heat spreading is required. Recalculate at the highest ambient temperature and worst-case control pattern.

Assign clocks to dedicated clock-capable pins and constrain them as clock signals in the Quartus design flow. Keep clock and data routing short, use matched series termination where channel analysis requires it, and avoid routing high-speed signals through noisy power-regulator regions. Provide continuous reference planes beneath routed layers and use the manufacturer's IBIS or board-simulation models when available for accurate edge-rate analysis.

Do not treat matching package dimensions as proof that every ordering suffix is interchangeable. EP4CE10F17A7N, EP4CE10F17I7N, EP4CE10F17C6N, and EP4CE10F17C7N share the EP4CE10 F17 256-FBGA identity, but qualification, temperature, and speed-related distinctions still require review. Confirm the full device part number in the Quartus software, compare pin and bank assignments, and recompile the design using the selected device before releasing production files.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The ordering option is listed as automotive with AEC-Q100, and the package is identified as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are not established by the available product information.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

EP4CE10F17A7N datasheet EP4CE10F17A7N datasheet pdf EP4CE10F17A7N pinout EP4CE10F17A7N specifications EP4CE10F17A7N equivalent EP4CE10F17A7N replacement EP4CE10F17A7N price EP4CE10F17A7N stock Altera EP4CE10F17A7N EP4CE10F17A7N FBGA-256 EP4CE10F17A7N vs EP4CE10F17I7N EP4CE10F17A7N automotive FPGA EP4CE10F17A7N footprint EP4CE10F17A7N schematic

پێکهاتە و زاراوە پەیوەندیدارەکان

Altera Intel EP4CE10F17A7N EP4CE10F17I7N EP4CE10F17C6N EP4CE10F17C7N Cyclone IV E FPGA CPLD field-programmable gate array configurable logic block CLB logic element FBGA-256 LBGA-256 surface-mount package AEC-Q100 1.2 V 472.5 MHz 179 I/O automotive electronic control unit industrial automation digital signal processing Quartus configuration
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ