EP4CE10F17C6N - 10,320-LE Cyclone IV E FPGA | Altera
MPN: EP4CE10F17C6N ✓ چالاکEP4CE10F17C6N گشتی
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after manufacture. FPGAs occupy the programmable-logic segment of the semiconductor hierarchy and combine configurable logic elements, embedded memory, input/output resources and programmable interconnect into one device. The Cyclone IV E family targets cost-sensitive embedded systems requiring moderate logic density and a broad selection of I/O resources.
The EP4CE10F17C6N provides 10,320 logic elements, 179 I/Os and 414 kbit of embedded memory. Its 1.2 V core supply supports low-voltage digital operation, while the F17 device designation identifies the package configuration associated with this ordering part number. The 256-LBGA package supports dense board integration but requires careful escape-routing, via-in-pad awareness and assembly-process planning when the PCB uses fine-pitch ball pitches.
The Cyclone IV E architecture combines programmable logic with block memory and dedicated input/output resources. This allows one FPGA to consolidate control logic, communication interfaces, data acquisition functions and protocol handling. Because FPGA configurations are programmable, the same hardware platform can support multiple product variants or field updates when the associated design tools, intellectual-property cores and configuration memory are available.
Typical uses include industrial control modules, data-acquisition equipment, network-interface controllers, video-processing front ends, embedded communications gateways and compact test systems. The 179-I/O count is particularly useful when a design must connect multiple sensors, converters, memories and communication transceivers without using several discrete programmable devices.
PCB design should account for the BGA escape-routing requirement, power and ground distribution, decoupling near supply balls, and the thermal path through the package and board. Configuration routing should also be checked against the selected configuration device or boot source because an incorrect launch or pin assignment can prevent the FPGA from operating even when the core power rail is correct.
This page consolidates the confirmed EP4CE10F17C6N characteristics, package information, sourcing context, comparison data and practical implementation guidance into an engineering-focused product reference for FPGA design reviews and procurement.
جێگرەوەکانی جێگۆڕکێ بۆ EP4CE10F17C6N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EP4CE10F17C6N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Embedded Memory, Logic Elements, Package Type, Mounting Type.
EP4CE10F17C8N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE10F17C7N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →EP4CE10F17C6N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Cyclone IV E field-programmable gate array (FPGA) |
| Logic Elements | 10,320 LE |
| User I/O Count | 179 I/O |
| Embedded Memory | 414 kbit |
| Core Supply Voltage | 1.2 V |
| Minimum Supply Voltage | 1.15 V |
| Process Technology | 60 nm |
| پاکێج | 256-pin LBGA |
| Package Family | FBGA family |
| Total Package Pins | 256 pins |
| Programmable Logic | 10,320 configurable logic elements |
| جۆری بیرگە | Embedded block memory |
| Device Variant | EP4CE10 F17 |
| جۆری دامەزراندن | Surface mount |
| دۆخی RoHS | Compliant |
ڕێنمایی ڕێکخستنی پینی EP4CE10F17C6N 256 pins
ڕێکخستنی پین بۆ EP4CE10F17C6N (پاکێجی 256 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ EP4CE10F17C6N.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
EP4CE10F17C6N گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, Data-Acquisition Systems, Communications Gateway, Video and Image Processing Front Ends, Embedded Networking and Interface Controllers, Test and Measurement Equipment.
Industrial Control and Automation
The EP4CE10F17C6N fits compact machine-control and automation modules that combine sequencing, interlocks, counters, diagnostics and communications. Its 10,320 logic elements provide more programmable capacity than a basic CPLD, while 179 I/Os allow direct connection of sensors, actuator drivers and industrial transceivers. The 414 kbit of embedded memory can hold buffers, lookup data and communication frames. Place the 256-LBGA device on a multilayer PCB with short, well-decoupled 1.2 V power distribution, and confirm the production system’s ambient-temperature and isolation requirements separately.
پێشنیارکراو
Data-Acquisition Systems
EP4CE10F17C6N can consolidate acquisition control, digital filtering, sample buffering and interface logic in a single programmable device. Its 10,320 logic elements are useful for parallel data paths and protocol state machines, while 179 I/Os provide substantial connectivity for converters, memory interfaces and test points. The 414 kbit of embedded memory supports data staging without requiring a separate buffer FPGA. Designers should assign acquisition channels according to bank voltage rules, route high-speed inputs with controlled impedance and verify the exact timing constraints in the manufacturer datasheet before fixing the external converter interface.
پێشنیارکراو
Communications Gateway
The EP4CE10F17C6N is suited to embedded gateways that bridge serial interfaces, local storage and supervisory logic. The 179-I/O count allows multiple interfaces to coexist without splitting a modest design across several programmable devices, and the 10,320 logic elements can implement framing, CRC generation, packet routing and flow control. Its 414 kbit of embedded memory can support command queues and small transmit or receive buffers. Keep configuration and serial interfaces in compatible voltage banks, follow the manufacturer power-sequencing requirements and validate termination, clocking and signal-integrity behavior at the target data rate.
پێشنیارکراو
Video and Image Processing Front Ends
EP4CE10F17C6N can implement compact video timing, pixel transport, thresholding and control functions where a full high-end FPGA would be unnecessary. Its 10,320 logic elements support parallel pipelines and frame-format conversion, while 179 I/Os provide channels for pixel data, synchronization and configuration. The embedded 414 kbit can accommodate line buffers or small working memories, although larger frame buffers require external memory. The design must account for 1.2 V core distribution, bank-compatible I/O voltages, BGA escape routing and source-synchronous timing; exact supported I/O standards and timing margins must be confirmed in the device documentation.
پێشنیارکراو
Embedded Networking and Interface Controllers
The EP4CE10F17C6N supports small embedded Ethernet, serial-link or custom bus controllers when the design fits within 10,320 logic elements and the available I/O count. Programmable logic can implement protocol state machines, data formatting, interrupt handling and packet checks, while the 414 kbit of embedded memory can serve as a FIFO or dual-port buffer. For a production board, validate clock-domain relationships, I/O standards, termination networks and throughput in the manufacturer timing documentation. The 256-LBGA footprint also demands assembly planning, adequate via escape structures and a thermal design that supports sustained switching activity.
پێشنیارکراو
Test and Measurement Equipment
EP4CE10F17C6N is well suited to programmable test logic, pattern generation, timing control and acquisition coordination in compact measurement equipment. The 10,320 logic elements can combine multiple control channels, while 179 I/Os connect test fixtures, comparators, memory devices and status signals. Embedded memory of 414 kbit can capture short records or support pattern buffers where external storage is impractical. Engineers should define the configuration scheme early, provide clean clocking and reference supplies, isolate sensitive analog paths from digital switching regions and confirm that all required I/O standards and operating conditions are supported for the exact device variant.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ EP4CE10F17C6N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | EP4CE10F17C8N | EP4CE10F17C7N |
|---|---|---|---|
| Brand | Altera | Altera | Altera |
| Package | 256-pin LBGA | 256-pin FBGA-family package | 256-pin TFBGA |
| Device Family | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Logic Elements | 10,320 LE | 10,320 LE | 10,320 LE |
| Core Supply Voltage | 1.2 V | 1.2 V class | 1.2 V class |
| Process Technology | 60 nm | 60 nm | 60 nm |
| Ordering Classification | C6 | C8 | C7 |
جیاکەرەوە سەرەکییەکان
- Matches the closest confirmed same-family resource configuration (بەراورد بەEP4CE10F17C8N)
- Provides the same programmable logic density with a different ordering classification (بەراورد بەEP4CE10F17C7N)
- Combines moderate logic density with a relatively high I/O count (بەراورد بەEP4CE10E22C6)
تێبینییەکانی دیزاین
Design the 256-LBGA escape routing from the manufacturer land pattern and assembly guidelines rather than from a generic BGA footprint. Confirm pad geometry, solder-mask definition, via-in-pad policy, fanout method and assembly capability with the PCB manufacturer. Place the device so high-speed routes can escape without violating ball-clearance rules, and reserve room for the configuration interface, clock inputs, decoupling and power-entry structures.
Implement the 1.2 V core rail as a low-impedance plane with short connections to the device supply balls. Follow the manufacturer’s recommended decoupling and power-sequence network, and use a power supply whose transient response and noise are suitable for the selected switching activity. Verify voltage tolerances, ramp requirements and bank-supply relationships from the manufacturer electrical tables before schematic release.
Keep clocks, configuration signals and sensitive interfaces away from the highest-current switching paths. Route each interface according to its supported I/O standard and target edge rate, using controlled impedance where required. Separate the FPGA core, I/O and auxiliary supplies as directed by the manufacturer, and provide a compact ground reference beneath signal-return paths so switching current does not share sensitive return traces.
Do not treat similarly named Cyclone IV E ordering codes as automatically interchangeable. EP4CE10F17C6N, EP4CE10F17C8N and EP4CE10F17C7N differ in ordering classification or package details, and the available comparisons do not establish every speed, temperature and lifecycle condition. Before substitution, verify the complete ordering table, ball map, AC timing, power specifications, configuration method and required qualification status.
زانیاری پابەندبوون
RoHS compliance is identified in the published device comparison. Other environmental and material-compliance fields require manufacturer confirmation.