HI5767/6CA - 10-Bit 60MSPS ADC w/ Reference | SSOP-28 | Renesas
MPN: HI5767/6CA ✓ چالاکHI5767/6CA گشتی
An ADC (analog-to-digital converter) is a semiconductor device that converts continuous analog signals into discrete digital codes, enabling real-world signals (voltage, current, temperature, RF) to be processed by digital systems such as FPGAs, DSPs, and microcontrollers. Within the data-converter hierarchy, the HI5767/6CA belongs to the successive-approximation/pipelined SAR-ADC family, which occupies the middle ground between slow, high-resolution SAR converters and very high-speed flash converters. It is widely used in cost-sensitive mid-bandwidth systems where 8-10 bit resolution is sufficient.
Key features of the HI5767/6CA include a 60 MHz maximum sampling rate, 10-bit resolution, internal 2.5 V voltage reference, single +5 V analog supply operation, and low power CMOS design. The pipelined architecture multiplies conversion throughput while keeping per-sample latency short, and the parallel digital interface simplifies downstream FPGA or ASIC capture. Internal reference and integrated sample-and-hold reduce the external BOM to a small number of bypass capacitors and a single decoupling network.
Typical applications include video digitisation, IF sampling in communications receivers, CCD imaging front-ends, instrumentation and digital oscilloscope front-ends, and high-speed data acquisition cards. The combination of internal reference, low pin count, and 60 MSPS throughput makes the part attractive for legacy designs in industrial imaging and communications infrastructure where a 10-bit conversion is adequate.
Designers should observe single-supply +5 V operation, provide adequate power-supply decoupling, and ensure the analog input drive network maintains the rated input bandwidth at the full-scale input of the converter. The wide SSOP-28 footprint simplifies PCB routing on multi-layer boards.
This page synthesises distributor pricing, drop-in alternatives, and design considerations not found in the manufacturer datasheet alone, helping engineers select, qualify, and source the HI5767/6CA efficiently.
جێگرەوەکانی جێگۆڕکێ بۆ HI5767/6CA — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ HI5767/6CA (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Architecture, Sampling Rate, Input Type, Resolution.
HI5767/6CA-T
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
HI5767/4CB-T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →HI5767/4CBZ-T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →HI5766KCAZ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →HI5714/7CB-T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS901E/1K
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →HI5767/6CA زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 10 bit |
| ڕێژەی نموونەگرتن | 60 MSPS (max) |
| Architecture | Pipelined CMOS ADC |
| Number of Channels | 1 |
| Input Type | Single-ended analog |
| ڤۆڵتیەی دابینکردن | 5 V (single supply) |
| Internal Reference | Yes (2.5 V typical) |
| Digital Interface | Parallel CMOS |
| پاکێج | SSOP-28 |
| جۆری دامەزراندن | Surface Mount |
| Process Technology | CMOS |
| دۆخی RoHS | Compliant (per Renesas product page) |
ڕێکخستنی پینی HI5767/6CA
| پین 1 | AVDD — Analog +5 V supply |
| پین 2 | AVSS — Analog ground |
| پین 3 | AIN — Analog input |
| پین 4 | REFT — Top reference decoupling |
| پین 5 | REFB — Bottom reference decoupling |
| پین 6 | REFOUT — Internal 2.5 V reference output |
| پین 7 | REFIN — Reference input (bypass to REFOUT or external ref) |
| پین 8 | CLKBYP — Clock buffer bypass/decoupling |
| پین 9 | CLK — Clock input |
| پین 10 | CLKGND — Clock ground |
| پین 11 | DVDD — Digital +5 V supply |
| پین 12 | DVSS — Digital ground |
| پین 13 | OE — Output enable (active high) |
| پین 14 | D9 (MSB) — Data output bit 9 |
| پین 15 | D8 — Data output bit 8 |
| پین 16 | D7 — Data output bit 7 |
| پین 17 | D6 — Data output bit 6 |
| پین 18 | D5 — Data output bit 5 |
| پین 19 | D4 — Data output bit 4 |
| پین 20 | D3 — Data output bit 3 |
| پین 21 | D2 — Data output bit 2 |
| پین 22 | D1 — Data output bit 1 |
| پین 23 | D0 (LSB) — Data output bit 0 |
| پین 24 | DRDY — Data ready / convert signal |
| پین 25 | PD — Power-down (active high) |
| پین 26 | NC — Not connected |
| پین 27 | NC — Not connected |
| پین 28 | AVDD — Analog +5 V supply |
بەکارهێنانە باوەکان
HI5767/6CA گونجاوە بۆ 6 بەکارھێنانs: Video Digitisation Front-End, IF Sampling for Communications Receivers, CCD Imaging Front-End, Digital Oscilloscope Front-End, High-Speed Data Acquisition Card, Set-Top Box and Cable Modem Tuner.
Video Digitisation Front-End
The HI5767/6CA's 60 MSPS sampling rate and 10-bit resolution make it well suited to digitising standard-definition and intermediate-frequency video signals in broadcast, surveillance, and industrial imaging systems. Placed at the front of an FPGA-based video pipeline with a single +5 V supply and internal 2.5 V reference, it eliminates the need for an external reference IC, simplifying the analogue front-end. Its pipelined CMOS architecture holds conversion latency low (typically 3-4 clock cycles), which simplifies downstream timing closure for line-locked video capture. Compared with a flash ADC, the HI5767/6CA offers far lower power dissipation at this resolution, allowing multi-channel capture boards to stay within thermal budgets without active cooling.
پێشنیارکراو
IF Sampling for Communications Receivers
In digital-IF receiver designs, the HI5767/6CA digitises intermediate-frequency signals after the mixer stage, enabling digital demodulation in the baseband processor. Its 60 MSPS throughput comfortably covers IF bandwidths up to approximately 25 MHz (Nyquist), making it appropriate for narrowband radio, satellite IF, and legacy cellular infrastructure. The internal 2.5 V reference and single +5 V supply simplify the RF board stack-up, while the parallel CMOS output drives an FPGA demodulator directly without an extra buffer. Designers benefit from the part's established second-source availability via Renesas/Rochester Electronics, which keeps long-lifecycle communications products in production.
پێشنیارکراو
CCD Imaging Front-End
The HI5767/6CA is well-matched to CCD line-scan and area-scan imagers used in industrial inspection, document scanning, and machine vision, where 10-bit pixel depth and 60 MSPS conversion support multi-megapixel per-second throughput. Its CMOS process provides low noise floor at pixel rates typical of CCD output amplifiers, and the integrated sample-and-hold removes the need for an external track-and-hold stage. Paired with a low-jitter clock source, the converter delivers clean digitisation that preserves the CCD's dynamic range, critical for high-contrast scenes in production-line inspection. The SSOP-28 footprint integrates easily into multi-channel camera boards.
پێشنیارکراو
Digital Oscilloscope Front-End
Cost-sensitive 100-200 MHz digital oscilloscopes and handheld scopes often rely on a 10-bit, 60 MSPS front-end ADC to provide sufficient timebase resolution and amplitude accuracy. The HI5767/6CA's pipelined architecture and parallel output interface pair naturally with an FPGA-based capture memory and trigger engine. Its 5 V single-supply operation reduces power-supply complexity inside a compact handheld enclosure, while the internal reference keeps bill-of-materials cost low. When paired with an attenuator/amplifier front-end and AC/DC coupling network, the converter enables sub-mV sensitivity through oversampling and averaging.
پێشنیارکراو
High-Speed Data Acquisition Card
PCI/PCIe-based data acquisition cards for industrial test, ultrasound, and vibration analysis commonly use the HI5767/6CA as the ADC front-end. Its 60 MSPS rate and 10-bit resolution cover ultrasonic transducer arrays operating in the 5-15 MHz range with comfortable margin, and the parallel CMOS output feeds an FPGA that performs beamforming or FFT before sending results over the bus. The internal reference and low pin count keep the analogue front-end compact, leaving board area for multi-channel signal conditioning. Long-term availability through Rochester Electronics makes the part attractive for medical and industrial systems with multi-year product lifecycles.
پێشنیارکراو
Set-Top Box and Cable Modem Tuner
Digital cable set-top boxes and early cable-modem designs use the HI5767/6CA in the downstream QAM/ATSC demodulator chain, where a 60 MSPS, 10-bit converter offers the resolution needed for symbol-level decoding while keeping tuner cost low. The internal 2.5 V reference and CMOS process allow the converter to coexist on the same +5 V rail as the tuner IC, simplifying the power tree. The pipelined latency is acceptable for the buffered demodulation stages used in consumer video. Its SSOP-28 package and standard pinout ease assembly on high-volume consumer electronics lines.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ HI5767/6CA — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | HI5767/6CA-T | HI5767/4CB-T | HI5767/4CBZ-T | HI5766KCAZ | ADS901E |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Texas Instruments |
| Package | SSOP-28 | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 8 bit | 10 bit |
| Sampling Rate | 60 MSPS | 60 MSPS | 20 MSPS | 20 MSPS | 60 MSPS | 20 MSPS |
| Supply Voltage | +5 V single | +5 V | +5 V | +5 V | +5 V | +5 V |
| Digital Interface | Parallel CMOS | Parallel CMOS | Parallel CMOS | Parallel CMOS | Parallel CMOS | Parallel CMOS |
| Architecture | Pipelined CMOS | Pipelined CMOS | Pipelined CMOS | Pipelined CMOS | Pipelined CMOS | Pipelined CMOS |
جیاکەرەوە سەرەکییەکان
- Highest sample-rate option within the HI5767 SSOP-28 family (بەراورد بەHI5767/4CB-T)
- 10-bit resolution with parallel CMOS output (بەراورد بەHI5766KCAZ)
- Internal 2.5 V reference reduces external BOM (بەراورد بەADS901E)
تێبینییەکانی دیزاین
The HI5767/6CA operates from a single +5 V supply split into separate analog (AVDD) and digital (DVDD) rails. Place a 10 uF bulk capacitor and a 100 nF ceramic decoupling capacitor within 5 mm of each AVDD/DVDD pin pair. Star-ground analog and digital returns at the converter's exposed pad to prevent digital switching currents from corrupting the analog input path. Aggressive power-supply rejection at the analog rail directly improves spurious-free dynamic range, so use an LDO rather than a switching regulator for AVDD when the design is noise-sensitive.
Treat the analog input trace as a 50 ohm transmission line if the input frequency content exceeds 10 MHz, and keep the trace length below 25 mm to avoid reflections. Surround the analog input with a continuous ground guard on the same PCB layer, with vias stitching the guard to the underlying ground plane every 5 mm. Place the REFOUT bypass capacitor (typically 100 nF) directly at the REFOUT pin and route REFIN as a short, low-impedance trace. The clock input is the most critical signal after AIN - place the clock source within 20 mm and use a series damping resistor if overshoot is observed.
Do not exceed the absolute maximum analog input voltage of AVDD + 0.3 V; transient over-voltage can latch up the CMOS input. Always enable the output enable (OE) line only after the clock is stable and the reference has settled (typically 100 us after power-up) to avoid spurious digital output codes. If the application demands better than 10-bit ENOB, oversample and average multiple conversions in the FPGA - the HI5767/6CA's pipelined noise floor permits an effective +1 bit gain under 4x oversampling. Finally, ensure the CLK duty cycle stays within 45-55% because jitter above 5 ps RMS will degrade SNR noticeably at 60 MSPS.
زانیاری پابەندبوون
RoHS and lead-free status per Renesas product page; AEC-Q100 not applicable - this is a commercial/industrial-grade ADC. REACH and conflict-minerals declarations not exposed in the provided data.