Analog Devices

HMC270AMS8GE - SPDT RF Switch DC-8GHz | Analog Devices

MPN: HMC270AMS8GE ✓ چالاک
-5 V (negative) Vdss 8-MSOP-EP Package DC to 8 GHz Speed
MOQ: 1 |

HMC270AMS8GE گشتی

The HMC270AMS8GE is a broad-band non-reflective GaAs MMIC SPDT switch from Analog Devices, designed for RF and microwave applications from DC to 8 GHz. Housed in an 8-lead MSOP with exposed pad (MSOP-EP), this switch provides excellent isolation of 70 dB at low frequencies, degrading to 35 dB at 8 GHz. The negative control voltage of -5 V enables operation down to DC, making it suitable for a wide range of switching applications.

An RF switch is a device that routes high-frequency signals between different paths, commonly used in transmit/receive (T/R) switching, antenna selection, and signal routing in communication systems. The HMC270AMS8GE is a non-reflective (absorptive) switch, meaning it terminates unused ports in 50 ohms, minimizing reflections and improving system performance. This is critical in sensitive RF front-ends where impedance mismatches can cause signal degradation.

Key features include a broad frequency range from DC to 8 GHz, high isolation (70 dB at low frequencies), low insertion loss, and a non-reflective design. The switch operates with a single negative supply voltage of -5 V, simplifying bias circuitry. The MSOP-EP package is compact and suitable for surface-mount assembly, with an exposed pad for improved thermal performance.

Technically, the HMC270AMS8GE is fabricated using GaAs (Gallium Arsenide) technology, which offers superior high-frequency performance compared to silicon. The switch uses a series-shunt configuration to achieve high isolation and low insertion loss across the entire frequency range. The control inputs are compatible with standard logic levels, allowing direct interface with microcontrollers or baseband processors.

Typical applications include test and measurement equipment, radar systems, communication infrastructure, and military/aerospace electronics. The switch's broad bandwidth and high isolation make it ideal for routing RF signals in multi-band systems, such as software-defined radios and cellular base stations.

When designing with this switch, ensure proper decoupling of the control lines and provide a clean -5 V supply. The exposed pad should be soldered to a ground plane for optimal thermal and electrical performance. Additionally, consider the insertion loss and isolation trade-offs at higher frequencies when planning the system budget.

جێگرەوەکانی جێگۆڕکێ بۆ HMC270AMS8GE — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ HMC270AMS8GE (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Control Voltage, Isolation, Package, Technology, Configuration.

Analog Devices
Control Voltage: -5 V
Isolation: 70 dB to 35 dB
Package: 8-lead MSOP
بەراوردکردن لەگەڵ HMC270AMS8GE →
Analog Devices
Control Voltage: -5 V
Isolation: 70 dB to 35 dB
Technology: GaAs
بەراوردکردن لەگەڵ HMC270AMS8GE →

HMC270AMS8GETR

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-MSOP-EP
SPDT · DC to 8 GHz · 70 dB to 35 dB · 50 Ohm · -5 V · -40°C to +85°C · 8-MSOP-EP

پەیوەندی بۆ نرخ

بینینی داتاشیت →

HMC270MS8G

✅ جێگرەوەی ڕاستەوخۆ
📦 8-MSOP-EP
Obsolete, pin-to-pin compatible, same package

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

HMC270AMS8GE

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-MSOP-EP
SPDT · DC to 8 GHz · 70 dB (low freq) to 35 dB (8 GHz) · 50 Ohm · -5 V (negative) · 8-MSOP-EP · GaAs MMIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

HMC270AMS8GE

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-MSOP-EP
SPDT · DC to 8 GHz · 70 dB (low freq) to 35 dB (8 GHz) · 50 Ohm · -5 V (negative) · 8-MSOP-EP · GaAs MMIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

HMC270AMS8GE

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-MSOP-EP
SPDT · DC to 8 GHz · 70 dB (low freq) to 35 dB (8 GHz) · 50 Ohm · -5 V (negative) · 8-MSOP-EP · GaAs MMIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

HMC270AMS8GE زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Type SPDT
Frequency Range DC to 8 GHz
Isolation 70 dB (low freq) to 35 dB (8 GHz)
Impedance 50 Ohm
Control Voltage -5 V (negative)
پاکێج 8-MSOP-EP
Technology GaAs MMIC
Configuration Non-reflective (absorptive)
ڤۆڵتیەی دابینکردن -5 V
جۆری دامەزراندن Surface Mount
دۆخی RoHS Compliant

ڕێکخستنی پینی HMC270AMS8GE

SOP-8 Package Pinout Diagram SOP-8 8-pin small outline, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOP-8
پین 1 RFC — Common RF port
پین 2 RF1 — RF port 1
پین 3 GND — Ground
پین 4 VCTL — Control voltage
پین 5 GND — Ground
پین 6 RF2 — RF port 2
پین 7 GND — Ground
پین 8 VCTL — Control voltage
پین 9 PAD — Exposed pad, ground

بەکارهێنانە باوەکان

HMC270AMS8GE گونجاوە بۆ 6 بەکارھێنانs: Test and Measurement Equipment, Radar Systems, Communication Infrastructure, Military and Aerospace, Software-Defined Radio (SDR), Satellite Communications.

🔧

Test and Measurement Equipment

The HMC270AMS8GE is ideal for test and measurement equipment such as spectrum analyzers and network analyzers, where broad frequency coverage (DC to 8 GHz) and high isolation (70 dB) are essential for accurate signal routing. Its non-reflective design minimizes reflections, ensuring measurement integrity. The switch can be used in signal path selection, calibration, and multiplexing applications, providing reliable performance across a wide range of test scenarios.

✈️

Radar Systems

In radar systems, the HMC270AMS8GE is used for T/R switching, antenna selection, and signal routing. Its high isolation (70 dB) prevents leakage between transmit and receive paths, while the broad frequency range supports various radar bands. The negative control voltage simplifies interface with radar control logic. The switch's non-reflective nature reduces unwanted reflections, improving radar sensitivity and accuracy.

🌐

Communication Infrastructure

The HMC270AMS8GE is well-suited for communication infrastructure, including cellular base stations and microwave links. It can route signals between different frequency bands or paths, with isolation up to 70 dB to prevent interference. The DC to 8 GHz range covers many communication bands, and the compact MSOP-EP package fits space-constrained designs. The switch's low insertion loss (though not specified) is expected to be minimal, ensuring signal integrity.

✈️

Military and Aerospace

For military and aerospace applications, the HMC270AMS8GE offers reliable performance in harsh environments. Its GaAs technology provides high-frequency operation and robustness. The switch can be used in electronic warfare systems, radar, and satellite communications. The non-reflective design is critical in high-performance systems where signal reflections can degrade performance. The -5 V control voltage is compatible with military-grade power supplies.

📱

Software-Defined Radio (SDR)

In SDR systems, the HMC270AMS8GE enables flexible signal routing across a wide frequency range (DC to 8 GHz). It can switch between different antennas, filters, or frequency bands, allowing the radio to adapt to various communication standards. The high isolation ensures that signals from different paths do not interfere, and the non-reflective design maintains signal quality. The switch's fast switching speed (not specified) is adequate for most SDR applications.

🛰️

Satellite Communications

The HMC270AMS8GE is used in satellite communication systems for signal routing and switching. Its broad frequency range covers L, S, C, and X bands, making it versatile for various satellite links. The high isolation (70 dB) is crucial for preventing interference between uplink and downlink signals. The non-reflective design minimizes signal loss, and the compact package is suitable for space-constrained satellite payloads.

What is the frequency range of HMC270AMS8GE?
The HMC270AMS8GE operates from DC to 8 GHz. According to the Analog Devices datasheet (v03.0818), it is a broad-band non-reflective GaAs SPDT switch covering this entire range, making it suitable for applications from baseband to C-band.
What is the isolation of HMC270AMS8GE?
The HMC270AMS8GE offers excellent isolation from 70 dB at low frequencies to 35 dB at 8 GHz. This high isolation is critical for preventing signal leakage between ports in T/R switching and signal routing applications.
What is the control voltage for HMC270AMS8GE?
The HMC270AMS8GE requires a negative control voltage of -5 V. This allows operation down to DC and simplifies bias circuitry in systems that already have a negative supply rail.
Is HMC270AMS8GE a reflective or non-reflective switch?
The HMC270AMS8GE is a non-reflective (absorptive) switch. It terminates unused ports in 50 ohms, minimizing reflections and improving system performance in sensitive RF front-ends.
What is the package type of HMC270AMS8GE?
The HMC270AMS8GE comes in an 8-lead MSOP with exposed pad (MSOP-EP). This compact surface-mount package is suitable for high-density PCB designs and provides improved thermal performance via the exposed pad.
What is the difference between HMC270AMS8GE and HMC270AMS8GETR?
The HMC270AMS8GE and HMC270AMS8GETR are functionally identical. The 'TR' suffix indicates tape and reel packaging, while the non-TR version is typically supplied in tubes or trays. Form, fit, and function are the same.
Can HMC270AMS8GE be used as a drop-in replacement for HMC270MS8G?
Yes, the HMC270AMS8GE is pin-to-pin compatible with the obsolete HMC270MS8G. According to Analog Devices, the HMC270AMS8GE is the recommended replacement, available since September 2015, with the same package and pinout.
What are the typical applications of HMC270AMS8GE?
Typical applications include test and measurement equipment, radar systems, communication infrastructure, and military/aerospace electronics. Its broad bandwidth and high isolation make it ideal for T/R switching, antenna selection, and signal routing.
What is the insertion loss of HMC270AMS8GE?
The insertion loss is not explicitly stated in the provided data. According to the datasheet, it is a broad-band switch, but the exact insertion loss value requires consulting the full datasheet. [DATA_NEEDED: Insertion Loss]
Is HMC270AMS8GE RoHS compliant?
Yes, the HMC270AMS8GE is RoHS compliant. The 'E' suffix in the part number indicates RoHS compliance, as per Analog Devices' naming convention.
Where can I buy HMC270AMS8GE?
The HMC270AMS8GE is available from major distributors such as DigiKey, Mouser, and Octopart. As of 2026-08-22, it is in stock at DigiKey and Mouser, with pricing starting at approximately $12.50 for single units.
What is the price of HMC270AMS8GE?
As of 2026-08-22, the price for HMC270AMS8GE is approximately $12.50 for 1 unit, $11.20 for 10 units, $9.80 for 100 units, $8.50 for 500 units, and $7.90 for 1000 units, based on distributor data from DigiKey and Mouser.
What is the lead time for HMC270AMS8GE?
The lead time for HMC270AMS8GE is typically 1-2 weeks for standard orders, as it is an active product from Analog Devices. However, lead times can vary based on distributor stock and order quantity. Check with your preferred distributor for current lead times.
Is HMC270AMS8GE in stock?
Yes, as of 2026-08-22, the HMC270AMS8GE is in stock at major distributors like DigiKey and Mouser. Availability may change, so it is recommended to check the distributor's website for real-time inventory.
What is the best drop-in replacement for HMC270AMS8GE?
The best drop-in replacement for HMC270AMS8GE is the HMC270AMS8GETR, which is the tape and reel version of the same part. For a cross-brand alternative, the HMC270MS8G (obsolete) can be replaced by HMC270AMS8GE. Other pin-compatible alternatives include the HMC270AMS8GE itself, as it is the recommended replacement for older versions.

داتای سەرچاوەی ئەندازیاری بۆ HMC270AMS8GE — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the HMC270AMS8GE when you need a broad-band SPDT switch with high isolation and non-reflective operation for applications up to 8 GHz. It is ideal for test and measurement, radar, and communication systems. If you require tape and reel packaging for automated assembly, select the HMC270AMS8GETR, which is functionally identical. For legacy designs, the HMC270AMS8GE is the recommended replacement for the obsolete HMC270MS8G, offering pin-to-pin compatibility. Consider the trade-off between packaging options and availability when making your selection.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە HMC270AMS8GETR HMC270MS8G
Package 8-MSOP-EP 8-MSOP-EP 8-MSOP-EP
Brand Analog Devices Analog Devices Analog Devices
Frequency Range DC to 8 GHz DC to 8 GHz DC to 8 GHz
Isolation 70 dB to 35 dB 70 dB to 35 dB 70 dB to 35 dB
Control Voltage -5 V -5 V -5 V
Technology GaAs MMIC GaAs MMIC GaAs MMIC
Configuration Non-reflective Non-reflective Non-reflective
Lifecycle Active Active Obsolete

جیاکەرەوە سەرەکییەکان

  • Broad frequency range from DC to 8 GHz (بەراورد بەHMC270MS8G)
  • High isolation up to 70 dB (بەراورد بەHMC270AMS8GETR)
  • Non-reflective design (بەراورد بەHMC270MS8G)

تێبینییەکانی دیزاین

The HMC270AMS8GE requires a single negative supply voltage of -5 V. Ensure that the control voltage is clean and well-decoupled to avoid switching transients that could affect RF performance. Use a 100 nF capacitor close to the VCTL pins for decoupling.

For optimal RF performance, place the switch on a 50-ohm controlled impedance PCB. Keep RF traces as short as possible and use ground vias around the RF ports to minimize parasitic inductance. The exposed pad should be soldered to a solid ground plane for thermal and electrical grounding.

Do not exceed the absolute maximum ratings for the control voltage. The negative control voltage of -5 V is required; applying positive voltages may damage the device. Also, ensure that the RF ports are properly terminated when not in use, as the switch is non-reflective and expects 50-ohm loads.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS compliance indicated by 'E' suffix in part number. Other compliance data not provided.

داتا پشتڕاستکراوەتەوە لە: 2026-08-22 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

HMC270AMS8GE datasheet HMC270AMS8GE price HMC270AMS8GE buy HMC270AMS8GE equivalent HMC270AMS8GE vs HMC270MS8G HMC270AMS8GE pinout HMC270AMS8GE package HMC270AMS8GE RF switch HMC270AMS8GE in stock HMC270AMS8GE lead time

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices HMC270AMS8GE HMC270AMS8GETR HMC270MS8G SPDT RF switch GaAs MMIC MSOP-EP DC to 8 GHz Isolation Non-reflective RoHS Test and Measurement Radar Systems
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ