HMC270AMS8GE - SPDT RF Switch DC-8GHz | Analog Devices
N.º da peça: HMC270AMS8GE ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.8 | $980,00 |
| 500 | $8.5 | $4.250,00 |
| 1.000 | $7.9 | $7.900,00 |
HMC270AMS8GE Visão geral
An RF switch is a device that routes high-frequency signals between different paths, commonly used in transmit/receive (T/R) switching, antenna selection, and signal routing in communication systems. The HMC270AMS8GE is a non-reflective (absorptive) switch, meaning it terminates unused ports in 50 ohms, minimizing reflections and improving system performance. This is critical in sensitive RF front-ends where impedance mismatches can cause signal degradation.
Key features include a broad frequency range from DC to 8 GHz, high isolation (70 dB at low frequencies), low insertion loss, and a non-reflective design. The switch operates with a single negative supply voltage of -5 V, simplifying bias circuitry. The MSOP-EP package is compact and suitable for surface-mount assembly, with an exposed pad for improved thermal performance.
Technically, the HMC270AMS8GE is fabricated using GaAs (Gallium Arsenide) technology, which offers superior high-frequency performance compared to silicon. The switch uses a series-shunt configuration to achieve high isolation and low insertion loss across the entire frequency range. The control inputs are compatible with standard logic levels, allowing direct interface with microcontrollers or baseband processors.
Typical applications include test and measurement equipment, radar systems, communication infrastructure, and military/aerospace electronics. The switch's broad bandwidth and high isolation make it ideal for routing RF signals in multi-band systems, such as software-defined radios and cellular base stations.
When designing with this switch, ensure proper decoupling of the control lines and provide a clean -5 V supply. The exposed pad should be soldered to a ground plane for optimal thermal and electrical performance. Additionally, consider the insertion loss and isolation trade-offs at higher frequencies when planning the system budget.
Alternativas drop-in para HMC270AMS8GE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com HMC270AMS8GE (mesmo formato e footprint) — diferindo em Control Voltage, Isolation, Package, Technology, Configuration.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
HMC270AMS8GETR
✅ Drop-In✓ Em estoque
$5.5 / unidade
Ver ficha técnica →HMC270MS8G
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
HMC270AMS8GE
✅ Drop-In✓ Em estoque
$7.9 / unidade
Ver ficha técnica →HMC270AMS8GE
✅ Drop-In✓ Em estoque
$7.9 / unidade
Ver ficha técnica →HMC270AMS8GE
✅ Drop-In✓ Em estoque
$7.9 / unidade
Ver ficha técnica →HMC270AMS8GE Classificações máximas e características elétricas
| Type | SPDT |
| Frequency Range | DC to 8 GHz |
| Isolation | 70 dB (low freq) to 35 dB (8 GHz) |
| Impedance | 50 Ohm |
| Control Voltage | -5 V (negative) |
| Encapsulamento | 8-MSOP-EP |
| Technology | GaAs MMIC |
| Configuration | Non-reflective (absorptive) |
| Tensão de alimentação | -5 V |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do HMC270AMS8GE
| Pino 1 | RFC — Common RF port |
| Pino 2 | RF1 — RF port 1 |
| Pino 3 | GND — Ground |
| Pino 4 | VCTL — Control voltage |
| Pino 5 | GND — Ground |
| Pino 6 | RF2 — RF port 2 |
| Pino 7 | GND — Ground |
| Pino 8 | VCTL — Control voltage |
| Pino 9 | PAD — Exposed pad, ground |
Aplicações típicas
HMC270AMS8GE é adequado para 6 aplicaçãos: Test and Measurement Equipment, Radar Systems, Communication Infrastructure, Military and Aerospace, Software-Defined Radio (SDR), Satellite Communications.
Test and Measurement Equipment
The HMC270AMS8GE is ideal for test and measurement equipment such as spectrum analyzers and network analyzers, where broad frequency coverage (DC to 8 GHz) and high isolation (70 dB) are essential for accurate signal routing. Its non-reflective design minimizes reflections, ensuring measurement integrity. The switch can be used in signal path selection, calibration, and multiplexing applications, providing reliable performance across a wide range of test scenarios.
Recomendado
Radar Systems
In radar systems, the HMC270AMS8GE is used for T/R switching, antenna selection, and signal routing. Its high isolation (70 dB) prevents leakage between transmit and receive paths, while the broad frequency range supports various radar bands. The negative control voltage simplifies interface with radar control logic. The switch's non-reflective nature reduces unwanted reflections, improving radar sensitivity and accuracy.
Recomendado
Communication Infrastructure
The HMC270AMS8GE is well-suited for communication infrastructure, including cellular base stations and microwave links. It can route signals between different frequency bands or paths, with isolation up to 70 dB to prevent interference. The DC to 8 GHz range covers many communication bands, and the compact MSOP-EP package fits space-constrained designs. The switch's low insertion loss (though not specified) is expected to be minimal, ensuring signal integrity.
Recomendado
Military and Aerospace
For military and aerospace applications, the HMC270AMS8GE offers reliable performance in harsh environments. Its GaAs technology provides high-frequency operation and robustness. The switch can be used in electronic warfare systems, radar, and satellite communications. The non-reflective design is critical in high-performance systems where signal reflections can degrade performance. The -5 V control voltage is compatible with military-grade power supplies.
Recomendado
Software-Defined Radio (SDR)
In SDR systems, the HMC270AMS8GE enables flexible signal routing across a wide frequency range (DC to 8 GHz). It can switch between different antennas, filters, or frequency bands, allowing the radio to adapt to various communication standards. The high isolation ensures that signals from different paths do not interfere, and the non-reflective design maintains signal quality. The switch's fast switching speed (not specified) is adequate for most SDR applications.
Recomendado
Satellite Communications
The HMC270AMS8GE is used in satellite communication systems for signal routing and switching. Its broad frequency range covers L, S, C, and X bands, making it versatile for various satellite links. The high isolation (70 dB) is crucial for preventing interference between uplink and downlink signals. The non-reflective design minimizes signal loss, and the compact package is suitable for space-constrained satellite payloads.
Recomendado
Dados de referência de engenharia para HMC270AMS8GE — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | HMC270AMS8GETR | HMC270MS8G |
|---|---|---|---|
| Package | 8-MSOP-EP | 8-MSOP-EP | 8-MSOP-EP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | DC to 8 GHz | DC to 8 GHz | DC to 8 GHz |
| Isolation | 70 dB to 35 dB | 70 dB to 35 dB | 70 dB to 35 dB |
| Control Voltage | -5 V | -5 V | -5 V |
| Technology | GaAs MMIC | GaAs MMIC | GaAs MMIC |
| Configuration | Non-reflective | Non-reflective | Non-reflective |
| Lifecycle | Active | Active | Obsolete |
Principais diferenciais
- Broad frequency range from DC to 8 GHz (vs HMC270MS8G)
- High isolation up to 70 dB (vs HMC270AMS8GETR)
- Non-reflective design (vs HMC270MS8G)
Notas de projeto
The HMC270AMS8GE requires a single negative supply voltage of -5 V. Ensure that the control voltage is clean and well-decoupled to avoid switching transients that could affect RF performance. Use a 100 nF capacitor close to the VCTL pins for decoupling.
For optimal RF performance, place the switch on a 50-ohm controlled impedance PCB. Keep RF traces as short as possible and use ground vias around the RF ports to minimize parasitic inductance. The exposed pad should be soldered to a solid ground plane for thermal and electrical grounding.
Do not exceed the absolute maximum ratings for the control voltage. The negative control voltage of -5 V is required; applying positive voltages may damage the device. Also, ensure that the RF ports are properly terminated when not in use, as the switch is non-reflective and expects 50-ohm loads.
Informações de conformidade
RoHS compliance indicated by 'E' suffix in part number. Other compliance data not provided.
