Texas Instruments

INA128U - 130dB CMRR Precision Instrumentation Amplifier | TI

MPN: INA128U ✓ چالاک
50 µV Vdss 700 µA Id 8-pin SOIC Package
MOQ: 1 |

INA128U گشتی

The Texas Instruments INA128U is a precision, low-power, three-op-amp instrumentation amplifier with 130 dB CMRR, a 700 µA quiescent current, and an 8-pin SOIC package. It operates from ±2.25 V to ±18 V, supports gains from 1 to 100,000 through an external gain-setting resistor, and is designed for measuring small differential signals superimposed on large common-mode voltages.

An instrumentation amplifier is a differential amplifier optimized for sensors and balanced signal chains. Its internal three-op-amp architecture provides high input impedance and accurate differential gain, making it more practical than connecting a general-purpose op amp directly to a balanced source. Within the signal-processing hierarchy, an instrumentation amplifier is a specialized amplifier IC, while the INA128U also belongs to the broader precision analog and low-power signal-conditioning family.

Key characteristics include a maximum input offset voltage of 50 µV, maximum offset drift of 0.5 µV/°C, maximum input bias current of 5 nA, and input protection to ±40 V. Current-feedback input circuitry maintains useful bandwidth at higher gain, including approximately 200 kHz at a gain of 100. The low 700 µA supply consumption supports battery-powered and portable measurement systems where amplifier power can materially affect operating time.

The INA128U uses an external resistor to establish gain, simplifying programming when only one gain is required. Its three-op-amp topology offers accurate gain control and strong common-mode rejection, but requires adequate layout discipline around high-impedance inputs and the gain resistor. Input and output filtering must be selected carefully because excessive capacitance can affect stability or reduce usable bandwidth.

Typical applications include bridge-transducer and pressure-sensor interfaces, precision current measurement, biomedical instrumentation, industrial process monitoring, and low-level differential sensing. The INA128U is particularly appropriate where a small sensor signal must be measured accurately in the presence of a much larger common-mode voltage and where low quiescent current is more important than very high bandwidth.

For reliable operation, keep input and gain-resistor connections short, provide adequate input and output decoupling, and verify stability with the actual source impedance and cable capacitance. If the input can exceed the supply rails, use the specified protection method rather than assuming ordinary op-amp input clamps can safely absorb the applied voltage. The effective system accuracy also depends on resistor tolerance and temperature coefficient.

This product record combines verified manufacturer specifications, distributor references, package and sourcing information, alternative-part analysis, and application guidance. It is intended to help engineers locate the datasheet, compare genuine same-package choices, estimate fit, and identify the design details that are not visible from a distributor listing alone.

جێگرەوەکانی جێگۆڕکێ بۆ INA128U — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ INA128U (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Architecture, Gain Range, Product Type, Quiescent Current.

Analog Devices
Package: 8-SOIC (0.154", 3.90mm Width)
Gain Range: 1 to 10,000
بەراوردکردن لەگەڵ INA128U →
Texas Instruments
Architecture: Three-op-amp instrumentation-amplifier design
Product Type: FET-input, low-power instrumentation amplifier
Quiescent Current: ±450 µA
بەراوردکردن لەگەڵ INA128U →
Texas Instruments
Architecture: Two-op-amp architecture
Product Type: Precision instrumentation amplifier
Quiescent Current: 175 µA per channel
بەراوردکردن لەگەڵ INA128U →
Texas Instruments
Package: 8-pin plastic DIP (PDIP)
Product Type: Precision instrumentation amplifier
بەراوردکردن لەگەڵ INA128U →
Texas Instruments
Gain Range: 1 to 10,000
Product Type: Precision, low-power instrumentation amplifier
بەراوردکردن لەگەڵ INA128U →
Analog Devices
Package: 8-pin SOIC (SO-8)
Gain Range: 1 to 10,000 (single external resistor)
بەراوردکردن لەگەڵ INA128U →

INA129U

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 8-pin SOIC
Precision, low-power instrumentation amplifier · Three-op-amp instrumentation amplifier · ±2.25 V to ±18 V · ±18 V · 1.3 MHz · 200 kHz · 50 µV · 0.5 µV/°C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

INA128U/2K5

✅ جێگرەوەی ڕاستەوخۆ
📦 8-pin SOIC
Same INA128U circuit and 8-pin SOIC package, with a 0.25% gain-tolerance designation; primary difference is gain accuracy rather than voltage, current, or speed.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD620ARZ

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-pin SOIC
Instrumentation Amplifier · 1 · 1 to 10,000 · ±2.3 V to ±18 V · 1.3 mA · 100 dB · 50 µV · 1.0 nA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LT1167IS8

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-pin SOIC
Instrumentation Amplifier · 1 · 1 to 10,000 (single external resistor) · 7.5 nV/√Hz at 1 kHz · 60 µV · 1.2 V/µs · 1 MHz · 0.9 mA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX4468

✅ جێگرەوەی ڕاستەوخۆ
📦 8-pin SOIC
Same 8-pin low-power instrumentation-amplifier package class and listed as an INA128 equivalent; gain range, CMRR, offset, bandwidth, and input characteristics differ.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

INA128U زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type Precision low-power instrumentation amplifier
Architecture Three-op-amp instrumentation amplifier
Number of Amplifiers 1 amplifier
Common-Mode Rejection Ratio 130 dB
Minimum Common-Mode Rejection Ratio 120 dB
ئێستای ئارام 700 µA
Maximum Input Offset Voltage 50 µV
Maximum Input Offset Drift 0.5 µV/°C
Maximum Input Bias Current 5 nA
Input Protection Range ±40 V
Supply Voltage Range ±2.25 V to ±18 V
Gain Range 1 to 100,000
Bandwidth at Gain 100 200 kHz
Maximum Slew Rate 4 V/µs
Maximum Gain-Bandwidth Product 1.3 MHz
پاکێج 8-pin SOIC
جۆری دامەزراندن Surface mount
مەودای پلەی گەرمیی کارکردن -40°C to +85°C

ڕێنمایی ڕێکخستنی پینی INA128U 8-pin soic

ڕێکخستنی پین بۆ INA128U (پاکێجی 8-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 8-pin soic بۆ INA128U

هیچ داتای وردی پینئاوت بەردەست نییە بۆ INA128U.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

INA128U گونجاوە بۆ 6 بەکارھێنانs: Bridge and Pressure Sensor Measurement, Portable Medical Monitoring, Precision Current Sensing, Industrial Process Control, Low-Level Sensor Signal Conditioning, Battery-Powered Data Acquisition.

🏭

Bridge and Pressure Sensor Measurement

The INA128U suits low-level bridge and pressure-sensor interfaces because its 130 dB CMRR rejects much of the common-mode voltage present on bridge outputs, while the 50 µV maximum offset and 5 nA maximum input bias current limit errors at the input. Place the amplifier directly across the differential bridge output and set the gain with the external resistor prescribed by the datasheet. The 700 µA quiescent current is valuable in portable test equipment, but sensor excitation current, bridge impedance, resistor tolerance, and input filtering determine the final measurement accuracy.

💊

Portable Medical Monitoring

The INA128U is appropriate for portable medical monitoring because its 700 µA quiescent current limits amplifier overhead in battery-powered equipment, while its high CMRR helps preserve small differential bio-signal information in the presence of common-mode interference. Its 50 µV maximum offset and 0.5 µV/°C maximum drift are useful for precision front ends, although electrode impedance, patient protection, isolation, leakage, and safety requirements remain separate design constraints. The SOIC-8 package supports compact analog boards without introducing the larger footprint of a DIP device.

⚡

Precision Current Sensing

The INA128U can amplify a small voltage generated across a precision shunt for current measurement. Its input bias current of no more than 5 nA reduces the error introduced when the shunt impedance is high, and its 130 dB CMRR helps isolate the shunt voltage from common-mode noise on the measurement path. The selected external gain resistor must follow the datasheet equation, and the output must remain within the amplifier's output swing. Kelvin routing and a differential measurement topology are preferable when the shunt current changes rapidly or the conductor carries substantial voltage.

🏭

Industrial Process Control

The INA128U is suitable for industrial process-control inputs that combine low-level sensor signals with elevated common-mode voltages. Its ±2.25 V to ±18 V supply range permits operation from a ±2.5 V rail to a ±15 V rail, while 130 dB CMRR improves rejection of process-coupled noise. The -40°C to +85°C specified operating range covers many industrial environments, but the design must still address surge events, grounding, isolation, calibration drift, and connector protection. Place the amplifier close to the sensor connector to minimize noise pickup before amplification.

🧩

Low-Level Sensor Signal Conditioning

The INA128U can condition outputs from thermistors, strain gauges, RTDs, and other slow-moving differential sensors when the signal requires high common-mode rejection and low offset. Its gain may be set from 1 to 100,000, allowing one amplifier family to cover multiple sensor sensitivities. Accurate gain depends on the external resistor's tolerance and temperature coefficient, while the approximately 200 kHz bandwidth at gain 100 is sufficient for many thermal and mechanical measurements. Input bias currents and sensor leakage should be included in the error budget.

🖥️

Battery-Powered Data Acquisition

The INA128U supports battery-powered data-acquisition systems through its 700 µA quiescent current, reducing standby demand when the overall system power budget is constrained. The SOIC-8 package also supports compact analog assemblies, and the device's precision offset and CMRR are useful for measuring weak differential channels without requiring the highest possible slew rate. Duty-cycling the supply, disabling unused channels, and selecting a low-leakage input filter can further improve system energy use. The gain resistor should use a stable technology to avoid gain drift during long measurements.

کورتەی بەرهەمە پێشنیارکراوەکان

INA129U Texas Instruments بەکارهێنراوە لە: Bridge and Pressure Sensor Measurement, Precision Current Sensing, Low-Level Sensor Signal Conditioning AD620 Alternative low-level differential amplifier بەکارهێنراوە لە: Bridge and Pressure Sensor Measurement, Industrial Process Control INA128U/2K5 Gain-tolerance-specific same-circuit option بەکارهێنراوە لە: Portable Medical Monitoring, Industrial Process Control, Battery-Powered Data Acquisition LT1167 Low-power instrumentation-amplifier alternative بەکارهێنراوە لە: Portable Medical Monitoring, Low-Level Sensor Signal Conditioning MAX4468 Low-power differential measurement alternative بەکارهێنراوە لە: Precision Current Sensing, Battery-Powered Data Acquisition
What is the INA128U and what are its key specifications?
The INA128U is a Texas Instruments precision, low-power, three-op-amp instrumentation amplifier in an 8-pin SOIC package. According to the INA128 datasheet and the verified TI product page, it provides 130 dB CMRR, 700 µA quiescent current, a maximum offset voltage of 50 µV, and a supply range of ±2.25 V to ±18 V. Its externally programmed gain range is 1 to 100,000, making it suitable for small differential sensor signals in industrial, medical, and portable measurement systems.
What is the operating voltage range of the INA128U?
The INA128U operates from ±2.25 V to ±18 V, corresponding to a total supply span of 4.5 V to 36 V. According to the Texas Instruments INA128 datasheet, this bipolar supply range supports low-voltage and higher-voltage instrumentation systems. Input common-mode and output swing limits still apply inside that range, so designers should check signal amplitude and headroom against the specific gain and load rather than treating the supply rating as unlimited linear input range.
Where can I download the INA128U datasheet PDF?
The official INA128U datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina128.pdf. The document covers the INA128 and related INA129 devices, including their three-op-amp architecture, gain equation, electrical characteristics, typical application circuits, package information, and ordering details. Engineers should use this manufacturer document rather than a distributor mirror whenever possible because revision status and the latest parametric limits are controlled by TI.
Where can I find the INA128U pinout and package details?
The INA128U uses an 8-pin SOIC package, and its complete pin assignments are shown in the pin configuration section of the official Texas Instruments INA128 datasheet. The verified product page confirms the SOIC-8 package through the INA128U ordering entry. Because the supplied web results do not reproduce every numbered pin name, this record does not invent a complete pinout; consult the manufacturer PDF and its package drawing before laying out the PCB or verifying replacement parts.
How is the gain set in an INA128U circuit?
The INA128U gain is set with one external gain-setting resistor between the designated gain pins. According to the Texas Instruments INA128 datasheet, the device supports a gain range of 1 to 100,000, and the resistor value determines the closed-loop gain. For accuracy, use the resistor value specified by the gain equation and consider both initial tolerance and temperature coefficient; gain error may dominate if the selected resistor is not stable.
What is the bandwidth of the INA128U at a gain of 100?
The INA128U provides approximately 200 kHz bandwidth at a gain of 100. According to the manufacturer datasheet, its current-feedback input circuitry preserves useful bandwidth at higher closed-loop gains compared with a conventional feedback implementation. The device's listed 1.3 MHz gain-bandwidth product is consistent with the specified 200 kHz bandwidth at gain 100, although actual system bandwidth also depends on source impedance, output loading, and parasitic capacitance.
INA128U vs INA129U: which instrumentation amplifier should I choose?
The INA129U is the closest same-brand, same-package choice because the verified TI material explicitly describes it as pin-compatible with the INA128 family, although its electrical specifications differ. The INA128U is the reference device for the listed 130 dB CMRR and 700 µA characteristics. The TI comparison page identifies INA828 as an alternative with different precision, noise, and capacitive-load characteristics, so it should not be treated as a universal drop-in without full verification.
What is the best drop-in replacement for INA128U?
The INA129U is the best-supported same-manufacturer replacement candidate because Texas Instruments identifies the INA12x family as using a gain-resistor arrangement intended to permit drop-in replacement of comparable devices. The INA128U and INA129U are available in the 8-pin SOIC format, but the exact gain, offset, CMRR, noise, and bandwidth differences must still be checked against the original design requirements. Confirm the complete manufacturer pinout before committing it to a production PCB.
Can AD620 replace INA128U without PCB changes?
The AD620 is a candidate same-package replacement that must be qualified before use, not a guaranteed substitution. The verified alternative data identifies the AD620 among INA128 equivalents, but the supplied evidence does not establish that every INA128U gain, accuracy, bandwidth, supply, and protection requirement is met. Engineers should compare the official AD620 datasheet, verify pin-for-pin behavior, and recalculate the gain resistor and output-range requirements before treating it as a drop-in replacement.
What can replace the INA128U in a low-power sensor circuit?
The INA129U is the first replacement to evaluate because it belongs to the same TI INA12x family, uses an 8-pin SOIC package, and is described as pin-compatible. The AD620, MAX4468, and LT1167 appear in the verified cross-reference results as additional equivalent candidates, but their pin assignments and electrical trade-offs are not fully documented in the supplied excerpts. Each candidate must therefore be checked against the original schematic for gain resistor placement, input protection, supply range, bandwidth, offset, and quiescent current.
Is the INA128U suitable for a 24 V industrial measurement system?
The INA128U can be used in a 24 V industrial system when the supply configuration and signal amplitudes remain within its ±18 V rating. Its ±40 V input-protection capability supports applications where inputs may exceed the operating rails, but protection behavior does not make every input condition safe or linear. The Texas Instruments datasheet also specifies operation from -40°C to +85°C. Industrial design should therefore include rail selection, transient protection, grounding, and isolation as required by the installation.
How much power does the INA128U consume?
The INA128U has a listed quiescent current of 700 µA. Its actual supply-power consumption is approximately twice the supply voltage multiplied by the total quiescent current because it uses dual supplies. For example, at ±15 V, the estimated quiescent supply power is 21 mW using 700 µA per rail. This is an estimate based on the published quiescent-current value and is separate from output-current dissipation; actual power varies with supply voltage, load, and operating temperature.
Where can I buy INA128U online and what is its price?
The INA128U can be found through the Texas Instruments product page and the verified DigiKey and Mouser listings, while INA128U/2K5 is also listed by DigiKey. The supplied results do not contain numerical unit prices, so a defensible price cannot be stated without inventing data. XAIPART's tier values remain quote placeholders as of 2026-10-28. Request a current quotation and confirm stock, lead time, lot traceability, and device packaging before ordering.
What is the lead time and stock status for INA128U?
Current stock and a numeric factory lead time are not established by the supplied excerpts. The Mouser result identifies the INA128U product and mentions inventory, while the DigiKey result states that INA128U/2K5 ships today, but that statement does not prove INA128U itself is in stock. Treat availability as unknown until the manufacturer or an authorized distributor confirms the exact suffix, quantity, date code, and shipment schedule.
What are the key specifications of INA128U that engineers should know?
The INA128U combines 130 dB CMRR, 700 µA quiescent current, 50 µV maximum offset, 5 nA maximum input bias current, and a 1-to-100,000 gain range in an 8-pin SOIC package. According to Texas Instruments, it operates from ±2.25 V to ±18 V, supports input protection to ±40 V, and reaches about 200 kHz bandwidth at gain 100. These parameters make it well suited to low-level differential measurements where common-mode rejection, offset, input impedance, and power consumption are primary design considerations.
Is the INA128U the same as an INA128P or an instrumentation amplifier in a different package?
The INA128U is electrically related to the INA128 family but uses the surface-mount 8-pin SOIC package; the INA128P is identified in the verified data as the plastic DIP-package member. The INA128P is therefore not a same-package drop-in alternative for an existing INA128U PCB. Likewise, dual and other instrumentation amplifiers may share general functionality while differing in channel count, pinout, gain range, or supply requirements, so package and pin compatibility must be checked separately.

داتای سەرچاوەی ئەندازیاری بۆ INA128U — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the INA128U when the design needs a precision, low-power instrumentation amplifier with 130 dB CMRR, 700 µA quiescent current, and gain up to 100,000 in an 8-pin SOIC footprint. INA129U is the first alternative to evaluate for a same-family, pin-compatible sourcing option, provided its offset, CMRR, noise, gain, and bandwidth satisfy the application. INA128U/2K5 offers the same circuit and package with a distinct 0.25% gain-tolerance designation, making it useful where gain accuracy is explicitly specified. Consider AD620 or LT1167 when their manufacturer data confirms the required gain range, CMRR, accuracy, speed, supply range, and pin behavior. MAX4468 is the lowest-parametric-proximity candidate and should be selected only after a detailed comparison. In every case, verify the gain resistor, input protection, output swing, noise, stability, and exact pin assignments before production release.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە INA129U INA128U/2K5 AD620 LT1167 MAX4468
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices Maxim Integrated

جیاکەرەوە سەرەکییەکان

  • High common-mode rejection in a low-power package (بەراورد بەMAX4468)
  • Direct same-family pin-compatible sourcing path (بەراورد بەINA129U)
  • Precision offset and drift for low-level signals (بەراورد بەAD620)
  • Higher supported gain range (بەراورد بەAD620)

تێبینییەکانی دیزاین

Route the differential input, gain-resistor, and feedback connections as short as possible on the PCB. High-impedance input nodes should receive guarded copper or remain physically separated from switching nodes and clocks. Place the gain resistor close to the corresponding device pins, use a stable resistor technology, and avoid test pads or long traces that can collect leakage. This layout discipline is especially important when the input bias current is close to 5 nA or the source impedance is high.

Do not add arbitrary input capacitance to the INA128U. The supplied manufacturer data identifies current-feedback input circuitry and approximately 200 kHz bandwidth at gain 100, but excessive cable or filter capacitance can alter frequency response or stability. If anti-alias filtering is required, derive the capacitor values and verify the complete input network against the manufacturer guidance. Place the final input filter close to the amplifier and keep its return path away from high-current switching nodes.

Decouple each supply rail close to the device and keep the return path continuous to the source. The INA128U requires a minimum total supply span of 4.5 V because its operating range is ±2.25 V to ±18 V. Estimated quiescent power at ±15 V is 21 mW using the published 700 µA quiescent-current value; this excludes load dissipation. Keep rail voltages within ±18 V and account for startup, output-swing, and ground-reference requirements in dual-supply systems.

The advertised ±40 V input protection does not imply that every applied input is safe for unlimited duration or remains linear. Verify the official input-protection circuit and absolute-maximum conditions before connecting field wiring, because the protected input may also influence offset, bias current, or recovery time. Likewise, do not assume that a lower-bandwidth alternative is interchangeable: compare CMRR, offset, bias current, gain range, output swing, supply range, and gain-resistor requirements on the same test conditions.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The supplied verified excerpts do not state the target device's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim has been inferred from generic distributor listings.

داتا پشتڕاستکراوەتەوە لە: 2026-10-28 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

INA128U datasheet Texas Instruments INA128U INA128U 130dB CMRR instrumentation amplifier INA128U 8-pin SOIC INA128U bridge sensor amplifier INA128U precision current measurement INA128U vs INA129U INA128U drop-in replacement INA128U AD620 equivalent INA128U buy price INA128U lead time and stock where to download INA128U datasheet PDF where to find INA128U pinout low power 700 uA instrumentation amplifier

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments INA128U INA129U INA128U/2K5 AD620 LT1167 MAX4468 precision instrumentation amplifier three-op-amp instrumentation amplifier differential amplifier amplifier IC precision analog signal-conditioning IC common-mode rejection ratio CMRR input offset voltage input bias current quiescent current gain-bandwidth product external gain-setting resistor 8-pin SOIC SOIC family surface-mount package bridge sensor industrial process monitoring
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ