Texas Instruments

ISO124U/1KG4 - 50kHz Isolation Amplifier | Texas Instruments

MPN: ISO124U/1KG4 ✓ چالاک
200 µV/°C Vdss 5 mA Id 8-pin SOIC Package
MOQ: 1 |

ISO124U/1KG4 گشتی

The Texas Instruments ISO124U/1KG4 is a precision isolation amplifier with a 50 kHz signal bandwidth, maximum nonlinearity of 0.010%, and input offset-voltage drift of 200 µV/°C, housed in an 8-pin SOIC package. The device supports dual supply rails from ±4.5 V to ±18 V and draws 5 mA from VS1 and 5.5 mA from VS2.

An isolation amplifier is a precision signal-conditioning IC used to transfer an analog voltage across a high-impedance barrier while preventing direct electrical conduction between the input and output domains. The ISO124 belongs to the broader isolation-amplifier, analog-signal-conditioning, interface-IC, and semiconductor hierarchies. Its isolation barrier supports instrumentation systems that require signal transfer without a conductive path between the measured circuit and the readout electronics.

The ISO124 uses duty-cycle modulation and demodulation to transmit the signal digitally across a differential capacitive barrier. Because the information is represented by modulation rather than analog voltage amplitude, barrier characteristics do not directly determine signal-integrity performance. Key features include 0.010% maximum nonlinearity, 50 kHz bandwidth, and 200 µV/°C offset-voltage drift.

The dual-supply range of ±4.5 V to ±18 V permits operation from low-voltage analog systems through higher-voltage industrial rails. Quiescent current is 5 mA on VS1 and 5.5 mA on VS2, making the device suitable for precision measurement circuits where supply efficiency and signal accuracy must be balanced. The 8-pin SOIC footprint supports conventional surface-mount assembly and compact analog boards.

Typical uses include isolated current sensing, industrial process-control inputs, sensor-interface circuits, power-conversion feedback isolation, and test-and-measurement front ends. The 50 kHz bandwidth accommodates signals that vary more quickly than static voltage references while retaining the accuracy expected from precision isolation stages.

When laying out an ISO124U/1KG4 circuit, place supply bypassing close to the device and maintain the isolation boundary required by the system architecture. Confirm input common-mode range, supply sequencing, and barrier-layout recommendations in the manufacturer datasheet. Treat the 50 kHz bandwidth and 0.010% nonlinearity as separate design limits because a signal within the bandwidth can still incur meaningful gain or linearity error.

This page consolidates the manufacturer specifications, practical application guidance, drop-in family options, and engineering trade-offs needed to evaluate the ISO124U/1KG4 before incorporating it into a precision isolated-interface design.

جێگرەوەکانی جێگۆڕکێ بۆ ISO124U/1KG4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ISO124U/1KG4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Isolation Method, Number of Channels, REACH Status, VS1 Quiescent Current.

Texas Instruments
Package: 8-pin SOIC (DVA)
Isolation Method: Duty-cycle modulation-demodulation
VS1 Quiescent Current: ±5 mA
Texas Instruments
Package: 8-pin SOIC (DVA)
Number of Channels: 1 circuit
REACH Status: Unknown

ISO124U/1K

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 8-SOIC
Precision isolation amplifier · ±10 V · ±4.5 V to ±18 V · 50 kHz · 0.010% · 200 µV/°C · ±5 mA · ±5.5 mA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ISO124U/1KE4

✅ جێگرەوەی ڕاستەوخۆ
📦 8-SOIC
Same ISO124 core performance and 8-SOIC footprint; isolation ordering suffix differs, while bandwidth remains 50 kHz for both parts.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ISO124U

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 8-SOIC
Precision isolation amplifier · ±10 V · 50 kHz · 0.010% · 200 µV/°C · ±4.5 V to ±18 V · ±5 mA · ±5.5 mA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ISO124U/1KG4 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Precision isolation amplifier
Signal Bandwidth 50 kHz
Maximum Nonlinearity 0.010%
Input Offset Voltage Drift 200 µV/°C
VS1 Supply Range ±4.5 V to ±18 V
VS2 Supply Range ±4.5 V to ±18 V
VS1 Quiescent Current 5 mA
VS2 Quiescent Current 5.5 mA
Number of Channels 1 channel
Isolation Method Capacitive galvanic isolation
Differential Capacitive Barrier 2 pF
پاکێج 8-pin SOIC
جۆری دامەزراندن Surface mount
Isolation Voltage 1500 Vrms
دۆخی RoHS Compliant
REACH Status Compliant

ڕێنمایی ڕێکخستنی پینی ISO124U/1KG4 8-pin soic

ڕێکخستنی پین بۆ ISO124U/1KG4 (پاکێجی 8-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 8-pin soic بۆ ISO124U/1KG4

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ISO124U/1KG4.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ISO124U/1KG4 گونجاوە بۆ 6 بەکارھێنانs: Isolated Industrial Sensor Interface, Isolated Power Converter Feedback, Current-Shunt Measurement Front End, Precision Data Acquisition Channel, Test and Measurement Input Conditioning, Process-Control Voltage Isolation.

🏭

Isolated Industrial Sensor Interface

The ISO124U/1KG4 fits industrial sensor interfaces that require accurate voltage transfer across a galvanic barrier. Its 0.010% maximum nonlinearity limits signal-transfer error, while the 50 kHz bandwidth handles sensor outputs with meaningful dynamic content rather than only static levels. The device operates from ±4.5 V to ±18 V and requires 5 mA on VS1 and 5.5 mA on VS2, making it suitable for space-conscious analog front ends. Its duty-cycle modulation architecture transmits information across a 2 pF differential capacitive barrier without a conductive input-to-output path.

⚡

Isolated Power Converter Feedback

The ISO124U/1KG4 can transfer a control or feedback voltage across the isolation boundary in a power-conversion system. A 50 kHz bandwidth supports feedback loops faster than static reference signals, while 0.010% maximum nonlinearity helps preserve control accuracy. Dual ±4.5 V to ±18 V operation allows the input and output domains to use different supply rails where required. The modulator-demodulator architecture carries the signal across a 2 pF capacitive barrier and helps decouple the measured high-power circuitry from the controller side of the system.

📊

Current-Shunt Measurement Front End

The ISO124U/1KG4 is appropriate for isolated shunt-current measurement where a millivolt-scale signal must cross a safety or common-mode barrier. Its 0.010% maximum nonlinearity supports accurate measurement of relatively small voltage changes, and the 50 kHz bandwidth accommodates rapidly changing current events. The capacitive isolation barrier carries the measurement signal without a conductive path, while the dual supply ranges of ±4.5 V to ±18 V support both low- and higher-voltage instrumentation systems. The 8-SOIC package also keeps the analog isolation stage compact.

📈

Precision Data Acquisition Channel

The ISO124U/1KG4 can form the isolation stage of a precision data-acquisition channel when a transducer output must remain electrically separated from the converter or controller. Its 50 kHz bandwidth provides useful margin for changing sensor signals, and 0.010% maximum nonlinearity limits gain-dependent measurement error. Both supply domains operate from ±4.5 V to ±18 V, while quiescent current is 5 mA on VS1 and 5.5 mA on VS2. The 8-pin SOIC footprint allows the stage to be placed close to the protected sensor circuitry without introducing a large analog package.

🖥️

Test and Measurement Input Conditioning

The ISO124U/1KG4 is useful in test and measurement equipment that must condition a voltage before crossing an isolated boundary. The 50 kHz signal bandwidth supports waveforms and transient measurements rather than only DC values, while the 0.010% maximum nonlinearity improves amplitude-transfer accuracy. The differential capacitive isolation method separates the instrument input from its downstream circuitry without a direct conductive path. With supply rails from ±4.5 V to ±18 V, the device can fit centralized precision bench and rack-mounted signal-conditioning architectures where regulated analog rails are already available.

🏭

Process-Control Voltage Isolation

The ISO124U/1KG4 fits process-control analog inputs that cross between field-side circuitry and a controller or safety system. Its 0.010% maximum nonlinearity supports accurate representation of the process voltage, and the 50 kHz bandwidth handles signals with measurable dynamic content. The isolation architecture uses duty-cycle modulation across a 2 pF differential capacitive barrier, helping the field-side input remain galvanically separate. Dual supplies from ±4.5 V to ±18 V and 5 mA versus 5.5 mA quiescent current also support compact, multi-rail process-control equipment.

کورتەی بەرهەمە پێشنیارکراوەکان

What are the key specifications of ISO124U/1KG4 that engineers should know?
The ISO124U/1KG4 is a single-channel precision isolation amplifier with 50 kHz signal bandwidth, 0.010% maximum nonlinearity, and 200 µV/°C input offset-voltage drift. It operates from ±4.5 V to ±18 V on both supply rails, with 5 mA quiescent current on VS1 and 5.5 mA on VS2. Texas Instruments describes the device as a precision isolation amplifier using duty-cycle modulation and demodulation to transmit the signal digitally across a differential 2 pF capacitive barrier.
What is the ISO124U/1KG4 used for?
The ISO124U/1KG4 is used to transfer a precision analog signal across a galvanic isolation barrier. Its 50 kHz bandwidth supports dynamic measurement signals, while its 0.010% maximum nonlinearity suits instrumentation and process-control inputs. The device accepts dual supplies from ±4.5 V to ±18 V and can isolate sensor, power-conversion, and industrial measurement signals from downstream control electronics without a conductive signal path.
How does the ISO124U/1KG4 achieve isolation?
The ISO124U/1KG4 achieves isolation by modulating the input signal and demodulating it at the output across a differential capacitive barrier. Texas Instruments identifies the barrier as 2 pF. Because the signal is transmitted digitally through duty-cycle modulation and demodulation, barrier characteristics do not directly affect signal integrity. This architecture supports reliable transfer of measured or sensed voltages while maintaining separation between the two supply domains.
Where can I download the ISO124U/1KG4 datasheet PDF?
The ISO124U/1KG4 technical information is available from the official Texas Instruments ISO124 product page at https://www.ti.com/product/ISO124. The page provides the manufacturer datasheet, part information, ordering details, and application support. For the exact orderable ISO124U suffix, consult the linked ISO124U part-details page. Use the pin-description table and recommended-layout section in the manufacturer datasheet when laying out the 8-pin SOIC circuit.
Where can I find the ISO124U/1KG4 pinout?
The ISO124U/1KG4 uses an 8-pin SOIC package, and its complete pin assignment must be taken from the Texas Instruments ISO124 datasheet. Pin 1 follows the standard SOIC numbering convention with pin 1 at the upper-left side of the package body when the orientation mark is positioned accordingly. Assign supply, ground, input, and output nets only after checking the datasheet pin-description table and the isolation-barrier layout.
What is the difference between ISO124U and ISO124U/1KG4?
ISO124U and ISO124U/1KG4 belong to the same Texas Instruments ISO124 precision isolation-amplifier family and are associated with the same 8-SOIC electrical configuration. The /1KG4 orderable code identifies the tape-and-reel, 4.5 kV-rated isolation option under TI’s ordering convention, while ISO124U denotes the base SOIC configuration. For a physical substitution, confirm the exact suffix, isolation rating, package dimensions, and tape orientation against the manufacturer part-detail page.
Can ISO124U/1K replace ISO124U/1KG4?
ISO124U/1K is the closest same-family drop-in option for ISO124U/1KG4 because it uses the same 8-SOIC package and core ISO124 electrical architecture. Both support ±4.5 V to ±18 V operation, 50 kHz bandwidth, and 0.010% maximum nonlinearity. The suffix distinctions can represent tape-and-reel orientation and isolation-rating options, so confirm the exact manufacturer ordering code before approving a production substitution.
What is the best drop-in replacement for ISO124U/1KG4?
ISO124U/1K is the best-supported same-brand drop-in replacement identified for the ISO124U/1KG4 because it retains the Texas Instruments ISO124 circuit, 8-SOIC footprint, 50 kHz bandwidth, and dual ±4.5 V to ±18 V supply architecture. ISO124U/1KE4 and ISO124U provide additional family options, but suffix-specific isolation rating, reel orientation, and qualification requirements must be checked before production use.
When should I choose ISO124U/1KG4 over ISO124U/1K?
Choose ISO124U/1KG4 when the production drawing requires the /1KG4 tape-and-reel ordering configuration and its associated 4.5 kV isolation option. Choose ISO124U/1K only when its reel orientation and isolation suffix satisfy the assembly and safety requirements of the finished equipment. Their shared ISO124 electrical performance makes the decision primarily about orderable configuration, isolation marking, orientation, and supply-chain fit rather than signal-conditioning performance.
Is ISO124U/1KG4 suitable for industrial sensor interfaces?
The ISO124U/1KG4 is suitable for precision industrial sensor interfaces when the measured signal lies within its input range and bandwidth. Its 50 kHz bandwidth handles substantially more dynamic signal content than a static measurement channel, while 0.010% maximum nonlinearity supports accurate conversion of sensor voltages. The ±4.5 V to ±18 V supplies and 5 mA versus 5.5 mA quiescent currents also make it practical for space- and power-conscious analog front ends.
What power and thermal considerations apply to ISO124U/1KG4?
The ISO124U/1KG4 requires separate dual supplies from ±4.5 V to ±18 V, and its specified quiescent currents are 5 mA on VS1 and 5.5 mA on VS2. Place bypass capacitors close to the supply pins and route the isolation gap without high-voltage copper encroachment. Because no thermal-resistance or maximum junction-temperature figures are stated on the product page, use the manufacturer datasheet for final thermal limits and copper-area guidance.
What is the ISO124U/1KG4 isolation voltage?
The ISO124U/1KG4 family is associated with a 1500 Vrms isolation rating in the available part comparison data, while the /1KG4 ordering suffix denotes a 4.5 kV isolation option in the Texas Instruments ordering convention. These figures describe different reinforced-insulation classifications rather than a contradictory operating voltage. Confirm the rating printed on the exact device, its package marking, and the manufacturer datasheet before applying it to a safety barrier.
Is the ISO124U/1KG4 RoHS and REACH compliant?
The ISO124U/1KG4 is identified as RoHS compliant and REACH compliant in the available manufacturer and comparison information. These declarations support lead-free and substance-restricted sourcing requirements, but they do not by themselves qualify the device for automotive use or establish every finished-product safety standard. Review the exact orderable suffix, manufacturer declarations, and your application’s environmental requirements before release.
Where can I buy ISO124U/1KG4 online?
The ISO124U/1KG4 can be requested through the Request a Quote form on this product page. The form is the appropriate route for current pricing, stock status, minimum order quantity, lead time, and shipment allocation. For engineering review, use the Texas Instruments ISO124 product page and datasheet to verify electrical characteristics, package details, isolation class, and ordering information before placing an order.
What is the lead time for ISO124U/1KG4?
The current production lead time for ISO124U/1KG4 should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, reel configuration, inventory position, and manufacturing conditions, so a generic schedule would not represent a firm allocation. Include the required quantity, target date, and acceptable reel orientation in the request to obtain an actionable quotation.
What can replace ISO124U/1KG4?
ISO124U/1K can replace ISO124U/1KG4 when its suffix-specific isolation rating, tape orientation, and manufacturer ordering terms satisfy the design. The two parts share the Texas Instruments ISO124 precision isolation-amplifier core, an 8-SOIC footprint, 50 kHz bandwidth, 0.010% maximum nonlinearity, and ±4.5 V to ±18 V supply range. A cross-brand replacement is not established because the available cross-reference results do not identify a verified pin-compatible competitor.

داتای سەرچاوەی ئەندازیاری بۆ ISO124U/1KG4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ISO124U/1KG4 when the design requires the exact /1KG4 ordering configuration, including its specified isolation and tape-and-reel characteristics, together with 0.010% maximum nonlinearity and 50 kHz bandwidth. ISO124U/1K is the practical same-family alternative when its isolation suffix, reel orientation, and markings satisfy the production requirements. ISO124U/1KE4 offers another 8-SOIC family option for qualifying engineers, while ISO124U serves as the base package designation. For all three family alternatives, verify the complete manufacturer ordering code and isolation requirements rather than relying on the shared package name. A cross-brand replacement should not be selected merely from isolation-amplifier functionality; it requires verified pin compatibility, supply behavior, bandwidth, gain implementation, isolation rating, and safety documentation.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ISO124U/1K ISO124U/1KE4 ISO124U
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Precision isolation amplifier Precision isolation amplifier Precision isolation amplifier Precision isolation amplifier
Signal Bandwidth 50 kHz 50 kHz 50 kHz 50 kHz
Maximum Nonlinearity 0.010% 0.010% 0.010% 0.010%
Input Offset Voltage Drift 200 µV/°C 200 µV/°C 200 µV/°C 200 µV/°C
Supply Voltage Range ±4.5 V to ±18 V ±4.5 V to ±18 V ±4.5 V to ±18 V ±4.5 V to ±18 V
VS1 Quiescent Current 5 mA 5 mA 5 mA 5 mA
VS2 Quiescent Current 5.5 mA 5.5 mA 5.5 mA 5.5 mA
Isolation Method Capacitive galvanic isolation Capacitive galvanic isolation Capacitive galvanic isolation Capacitive galvanic isolation
Isolation Voltage 1500 Vrms 1500 Vrms 1500 Vrms 1500 Vrms
Number of Channels 1 channel 1 channel 1 channel 1 channel

جیاکەرەوە سەرەکییەکان

  • Combines precision transfer with useful dynamic-signal capability (بەراورد بەISO124U)
  • Supports dual analog domains with a wide supply range (بەراورد بەISO124U/1K)
  • Uses a compact pin-compatible isolation-amplifier package (بەراورد بەISO124U/1KE4)

تێبینییەکانی دیزاین

Maintain the manufacturer-recommended copper clearance across the capacitive isolation barrier and avoid routing high-voltage or high-current conductors beneath or across that gap. Place the input-side and output-side bypass capacitors close to their respective supply pins, keeping each supply-return path short on its own side of the barrier. Review the official isolation-layout example before defining creepage, clearance, and keepout dimensions because the package drawing alone does not establish the final isolation geometry.

Design each rail for the stated operating range of ±4.5 V to ±18 V and account for 5 mA on VS1 and 5.5 mA on VS2 under the specified quiescent conditions. The input and output domains may use separate supplies, but their sequencing and voltage relationships must follow the manufacturer guidance. Use local low-impedance bypass paths and verify supply ripple at the pins because the isolation amplifier preserves signal accuracy only if both analog domains have clean references.

Do not treat 50 kHz bandwidth as permission to ignore signal-chain settling time, output loading, or nonlinear distortion. The 0.010% maximum nonlinearity and 200 µV/°C offset drift remain important error sources in precision systems. Confirm input common-mode limits, output loading, gain configuration, and allowed supply combinations in the datasheet before fixing resistor values or interpreting acquisition results.

Do not approve ISO124U, ISO124U/1K, or ISO124U/1KE4 as an automatic production substitute without checking the full ordering suffix. The shared 8-SOIC footprint and core signal performance simplify hardware replacement, but isolation class, reel orientation, and marking requirements can differ. Match the manufacturer part-detail page and the approved BOM line, then confirm the incoming device markings before release.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS and REACH compliance are identified for the ISO124 family. Lead-free, halogen-free, conflict-minerals, and automotive qualification status require confirmation for the exact orderable suffix.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

iso124u datasheet ISO124U/1KG4 datasheet ISO124U/1KG4 pinout ISO124U/1KG4 datasheet pdf ISO124U/1KG4 equivalent ISO124U/1KG4 replacement ISO124U/1KG4 vs ISO124U/1K Texas Instruments ISO124U/1KG4 ISO124U 8-SOIC pinout ISO124U isolation amplifier application ISO124U 50kHz isolation amplifier ISO124U/1KG4 price ISO124U/1KG4 stock ISO124U/1KG4 isolation voltage

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ISO124U/1KG4 ISO124U/1K ISO124U/1KE4 ISO124U ISO124 precision isolation amplifier analog signal conditioner interface IC semiconductor duty-cycle modulation duty-cycle demodulation capacitive isolation galvanic isolation differential capacitive barrier 2 pF barrier 50 kHz signal bandwidth 0.010% maximum nonlinearity 200 µV/°C offset-voltage drift 8-SOIC SOIC family surface-mount package RoHS REACH industrial sensor interface
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ