KSZ8864RMNI - 4-Port 10/100 Managed Ethernet Switch | Microchip
MPN: KSZ8864RMNI ✓ چالاکKSZ8864RMNI گشتی
An Ethernet switch is a Layer 2 network device that receives Ethernet frames on one port, examines the destination MAC address, and forwards traffic to the appropriate port or switch fabric. A managed switch adds programmable features such as port configuration, address learning, VLAN support, traffic prioritization, and link status monitoring. The KSZ8864RMNI combines those functions with integrated PHYs and host interfaces, reducing the number of external components required in industrial Ethernet equipment.
The KSZ8864RMN family provides patented and enhanced mixed-signal technology, media access control units, a high-speed non-blocking switch fabric, a dedicated address lookup engine, and on-chip frame-buffer memory. The two MAC interfaces can use MII or RMII, while the integrated I2C and SPI interfaces support host configuration and control. These features make the device suitable for industrial controllers, embedded network bridges, factory automation equipment, and compact Ethernet gateways.
The KSZ8864RMNI is the industrial-temperature version of the KSZ8864RMN family, specified for operation from -40 C to +85 C. A separate automotive-qualified AEC-Q100 version is identified as KSZ8864RMNU in the manufacturer documentation. The KSZ8864 family is intended for 10/100 Mbps networks and emphasizes a small package size, integrated PHYs, and flexible CPU control interfaces.
For a new design, use the manufacturer datasheet for the complete pin description, register map, electrical limits, crystal requirements, and reference schematic. Preserve the recommended Ethernet magnetics, clock, decoupling, and controlled-impedance layout. When replacing an existing device, verify package dimensions, exposed-pad treatment, strap resistors, PHY addressing, and the required MII/RMII clock configuration before confirming a drop-in replacement.
This page combines the manufacturer's product information with practical design guidance, drop-in candidate analysis, application context, and a parameter comparison. The comparison is intended to accelerate engineering review while preserving the need to validate timing, thermal behavior, regulatory requirements, and production details against the latest manufacturer documentation.
جێگرەوەکانی جێگۆڕکێ بۆ KSZ8864RMNI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ KSZ8864RMNI (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Automotive Qualification, Package, Product Type.
KSZ8864RMN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →KSZ8864RMNU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →KSZ8864CNXI
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →KSZ8864RMNI زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Layer 2 managed 4-port Ethernet switch |
| Number of Ethernet Ports | 4 ports |
| Ethernet Speed | 10/100 Mbps per port |
| Integrated PHYs | 4 integrated 10/100 Fast Ethernet PHYs |
| MAC Interfaces | 2 MAC interfaces with MII or RMII |
| CPU Control Interfaces | I2C and SPI |
| Switch Architecture | High-speed non-blocking switch fabric |
| Address Lookup | Dedicated address lookup engine |
| Frame Buffer | On-chip frame buffer memory |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| مەودای پلەی گەرمیی کارکردن | -40 C to +85 C |
| پاکێج | 64-QFN, 8 x 8 mm |
| جۆری دامەزراندن | Surface mount |
| Automotive Qualification | AEC-Q100 version identified separately as KSZ8864RMNU |
| Layer | Layer 2 |
ڕێنمایی ڕێکخستنی پینی KSZ8864RMNI 64-qfn, 8 x 8 mm
ڕێکخستنی پین بۆ KSZ8864RMNI (پاکێجی 64-qfn, 8 x 8 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ KSZ8864RMNI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
KSZ8864RMNI گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Gateway, Factory Automation Controller, Embedded Network Bridge, IoT Edge Gateway, Network Test Equipment, Building Access Controller.
Industrial Ethernet Gateway
The KSZ8864RMNI fits an industrial gateway that must terminate four 10/100 Mbps copper links while connecting to a host processor through two MAC interfaces. Its four integrated PHYs reduce external PHY count and board area, while the non-blocking switch fabric supports simultaneous traffic handling. The industrial-temperature range of -40 C to +85 C suits factory-floor equipment, but deployment still requires validation of EMC performance, isolation strategy, thermal conditions, and the enclosure temperature rise.
پێشنیارکراو
Factory Automation Controller
The KSZ8864RMNI provides a compact managed-network endpoint for programmable automation equipment that must connect sensors, HMIs, and service computers over 10/100 Mbps Ethernet. Four integrated PHYs reduce board-level component count, while I2C and SPI permit a controller to configure ports and read status. The MII or RMII MAC options support host attachment, and the -40 C to +85 C industrial grade supports controlled indoor factory environments where harsh temperature, surge, and isolation requirements are addressed separately.
پێشنیارکراو
Embedded Network Bridge
The KSZ8864RMNI is useful in an embedded bridge that links multiple Fast Ethernet devices to a higher-level CPU or controller. Two MAC interfaces can connect through MII or RMII, while four PHY ports provide copper connectivity on the switched side. Its address lookup engine, frame-buffer memory, and non-blocking fabric make it appropriate for Layer 2 forwarding. Firmware must configure addressing, port parameters, and interrupt behavior using the register interface documented by Microchip Technology.
پێشنیارکراو
IoT Edge Gateway
The KSZ8864RMNI can consolidate several 10/100 Mbps Ethernet links in a compact IoT edge gateway while a host processor manages protocol conversion and local services. Four integrated PHYs minimize board footprint, and I2C/SPI configuration suits embedded operating systems that control the switch through registers. This application benefits from the device's small 8 x 8 mm 64-QFN package, although sustained port loading should be evaluated against thermal and power budgets, and network isolation must follow the product's security and regulatory requirements.
پێشنیارکراو
Network Test Equipment
The KSZ8864RMNI suits compact test and measurement systems that need repeatable Fast Ethernet port characterization or network segmentation. The managed switch architecture supports configurable Layer 2 behavior, and the two MAC interfaces allow a tester to observe traffic through a host connection. I2C and SPI simplify instrument control, while the integrated PHYs reduce external circuitry. Measurement accuracy and protocol coverage depend on the firmware, test fixtures, and isolation design rather than the switch alone.
پێشنیارکراو
Building Access Controller
The KSZ8864RMNI can support a building-access controller with separate Ethernet connections for readers, controllers, and supervisory equipment. Four managed 10/100 Mbps ports provide local Layer 2 connectivity, while I2C and SPI allow a supervising processor to configure the device. The industrial-temperature option fits many indoor control cabinets, but access-control designs must address power-loss behavior, secure boot and key management, surge protection, grounding, and network segmentation. Those requirements are system-level controls rather than functions inherent in the switch.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ KSZ8864RMNI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | KSZ8864RMN | KSZ8864RMNU | KSZ8864CNXI |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (8 x 8 mm) | 64-QFN (8 x 8 mm), same package family | 64-QFN (8 x 8 mm), same package family | 64-QFN (8 x 8 mm), same package family |
| Ethernet Ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Ethernet Speed | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
| Integrated PHYs | 4 integrated 10/100 PHYs | 4 integrated 10/100 PHYs | 4 integrated 10/100 PHYs | 4 integrated 10/100 PHYs |
| MAC Interfaces | 2 MAC interfaces with MII or RMII | 2 MAC interfaces with MII or RMII | 2 MAC interfaces with MII or RMII | 2 MAC interfaces with MII or RMII |
| CPU Control Interface | I2C and SPI | I2C and SPI | I2C and SPI | I2C and SPI |
| Switch Layer | Layer 2 managed | Layer 2 managed | Layer 2 managed | Layer 2 managed |
جیاکەرەوە سەرەکییەکان
- Combines four PHYs and two MAC interfaces in one package (بەراورد بەKSZ8864RMN)
- Industrial-temperature grade matches embedded factory equipment (بەراورد بەKSZ8864RMNU)
- High integration reduces discrete Ethernet PHY count (بەراورد بەKSZ8864CNXI)
تێبینییەکانی دیزاین
Use the manufacturer reference layout and pin table for the 64-QFN exposed pad, power planes, Ethernet pairs, and clock connections. Keep each 10/100 differential pair routed with continuous reference planes and controlled impedance, minimize stubs and layer transitions, and place the switch close to its Ethernet magnetics. Do not route high-speed host or switch-clock signals through the analog PHY region.
Decouple the 3.3 V supply locally with the capacitance and placement specified by Microchip Technology. Separate noisy switching nodes and clock sources from sensitive PHY and magnetics areas, and provide a clean return path beneath the exposed pad. Estimated: Pdevice equals 3.3 V times the maximum total device current; obtain the current limit from the datasheet before sizing the regulator and copper area.
Do not treat KSZ8864RMN, KSZ8864RMNI, KSZ8864RMNU, and KSZ8864CNXI as interchangeable without checking the ordering table. Grade, qualification, temperature range, clock options, and suffix-dependent details can affect production suitability. After replacement, verify PHY strapping, register defaults, MII/RMII selection, interrupt polarity, and the host driver configuration against the exact selected MPN.
Confirm the required Ethernet magnetics and isolation architecture for the application, including center-tap handling, common-mode requirements, link pulses, and return paths. Managed-switch status can differ from simple bridge behavior, so validate startup, link-flap recovery, address-table aging, VLAN operation, and firmware access to all four PHYs before committing the design to production.
زانیاری پابەندبوون
The manufacturer documentation identifies KSZ8864RMNU as the AEC-Q100 automotive-qualified version. Compliance status for KSZ8864RMNI was not stated and must be confirmed from the current manufacturer product documentation or declaration.