LAN7500-ABZJ USB 2.0 to Gigabit Ethernet | Microchip
MPN: LAN7500-ABZJ ✓ چالاکLAN7500-ABZJ گشتی
A USB-to-Ethernet controller is an interface IC that bridges a USB host connection and an Ethernet network. Within the connectivity hierarchy, the LAN7500 combines multiple protocol functions that otherwise require separate MAC, PHY, USB interface, filtering, and packet-buffer components. This integration reduces board-level complexity while providing support for 10, 100, and 1000 Mb/s Ethernet operation through a single USB 2.0 interface.
The LAN7500's principal features include a 10/100/1000 Ethernet MAC and PHY, a dedicated USB PHY, a Hi-Speed USB 2.0 device controller, and 32 KB of internal packet buffering. Its integrated filtering engine supports Ethernet traffic filtering, while the TAP and EEPROM controllers support the network-device functions normally required by a USB-connected Ethernet adapter. These functions make the controller suitable for compact adapters, embedded network ports, and portable connectivity products.
The device combines a USB 2.0 device interface with a Gigabit Ethernet network interface while avoiding a separate external Gigabit Ethernet PHY in the target design. Its internal FIFO controller is specified with 32 KB of packet buffering, providing a defined data path between the USB and Ethernet sides. The 56-QFN package measures 8 mm by 8 mm according to the product listing, with an exposed thermal and electrical pad that must follow the manufacturer's land-pattern requirements.
The Microchip LAN7500/LAN7500i data sheet identifies embedded systems, set-top boxes, personal video recorders, USB port replicators, USB-to-Ethernet dongles, and test instrumentation as representative applications. These uses align with the controller's combination of USB connectivity, Gigabit Ethernet support, packet buffering, and Ethernet filtering. A design can therefore add a network interface to a USB-capable embedded platform without implementing a discrete Ethernet controller and PHY around it.
PCB implementation should follow the pin-description table, recommended land pattern, and reference schematic in the Microchip data sheet. The exposed pad requires the prescribed thermal-via and copper implementation, while input, output, crystal, and Ethernet differential-pair connections require careful routing. Validation should include USB enumeration, Ethernet link establishment at each supported rate, packet-loopback testing, and thermal assessment at the maximum intended operating condition.
This page combines the core LAN7500-ABZJ specifications, application guidance, package information, sourcing questions, and replacement considerations into one engineering-focused reference. It also distinguishes verified functions and package details from parameters that require confirmation from the complete electrical table before a design is released for production.
جێگرەوەکانی جێگۆڕکێ بۆ LAN7500-ABZJ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN7500-ABZJ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, USB Interface.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەLAN7500-ABZJ تایبەتمەندییەکان
| Product Type | USB 2.0 to 10/100/1000 Ethernet controller |
| USB Interface | Hi-Speed USB 2.0 |
| Maximum USB Data Rate | 480 Mb/s |
| Supported Ethernet Rates | 10/100/1000 Mb/s |
| Ethernet MAC | 1 integrated 10/100/1000 Ethernet MAC |
| Ethernet PHY | 1 integrated 10/100/1000 Ethernet PHY |
| USB PHY | 1 integrated USB PHY |
| USB Device Controller | 1 integrated Hi-Speed USB 2.0 device controller |
| Filtering Engine | 1 integrated Ethernet filtering engine |
| TAP Controller | 1 integrated TAP controller |
| EEPROM Controller | 1 integrated EEPROM controller |
| FIFO Controller | 1 integrated FIFO controller |
| Internal Packet Buffering | 32 KB |
| پاکێج | 56-QFN, 8 mm x 8 mm |
| Exposed Pad | 1 exposed pad |
| Packaging | Tray |
| Core Supply Voltage | 1.2 V |
| I/O Supply Voltage | 2.5 V to 3.3 V |
ڕێنمایی ڕێکخستنی پینی LAN7500-ABZJ 56-qfn, 8 mm x 8 mm
ڕێکخستنی پین بۆ LAN7500-ABZJ (پاکێجی 56-qfn, 8 mm x 8 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN7500-ABZJ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN7500-ABZJ گونجاوە بۆ 6 بەکارھێنانs: USB-to-Ethernet Dongles, USB Port Replicators, Set-Top Boxes, Personal Video Recorders, Embedded Systems, Test and Measurement Instrumentation.
USB-to-Ethernet Dongles
The LAN7500-ABZJ fits compact USB-to-Ethernet dongles because it combines a Hi-Speed USB 2.0 interface with an integrated 10/100/1000 Ethernet MAC and PHY. The 32 KB internal packet buffer supports packet transfer between the USB and Ethernet domains, while the filtering engine, TAP controller, EEPROM controller, and FIFO controller consolidate functions normally spread across several devices. Its 8 mm by 8 mm 56-QFN package helps limit adapter-board area. The design must follow the manufacturer's recommended USB routing, Ethernet magnetics interface, supply network, exposed-pad layout, and reference schematic.
پێشنیارکراو
USB Port Replicators
A USB port replicator can use the LAN7500-ABZJ to add 10, 100, or 1000 Mb/s Ethernet without requiring a separate Ethernet MAC and PHY. The integrated USB PHY and Hi-Speed USB 2.0 device controller handle the host-facing side, while the Ethernet PHY and MAC handle the network-facing side. The controller's 32 KB internal packet buffering and filtering engine are useful for maintaining orderly traffic handling in a multiport accessory. Board planning should account for the 56-QFN exposed pad, high-speed USB signal integrity, Ethernet differential routing, and the manufacturer's prescribed power network.
پێشنیارکراو
Set-Top Boxes
The LAN7500-ABZJ is suitable for set-top boxes requiring an economical USB-to-Gigabit Ethernet path. Its integrated 10/100/1000 MAC and PHY support deployment across copper Ethernet standards, while Hi-Speed USB 2.0 provides the connection to the host processor or an internal USB controller. Integrating the filtering engine, TAP controller, EEPROM controller, FIFO controller, and 32 KB packet buffer simplifies the network interface design. Engineers should verify host-driver support, thermal performance of the exposed pad, Ethernet magnetics selection, and separation between USB and Ethernet signal paths using the manufacturer guidance.
پێشنیارکراو
Personal Video Recorders
Personal video recorders can benefit from the LAN7500-ABZJ when they need network connectivity through an available USB interface. The device provides a direct bridge between Hi-Speed USB 2.0 and a 10/100/1000 Ethernet PHY, avoiding a discrete MAC and PHY implementation. Internal packet buffering of 32 KB supports traffic transfer between the two interface domains, and the integrated filtering engine can support controlled network traffic handling. The implementation should confirm operating-system driver availability and validate sustained throughput, connector mechanics, magnetics isolation, power sequencing, and the thermal design of the 8 mm by 8 mm QFN package.
پێشنیارکراو
Embedded Systems
The LAN7500-ABZJ suits embedded platforms that expose USB internally but require an Ethernet connection. The controller integrates the 10/100/1000 Ethernet MAC, Ethernet PHY, USB PHY, USB 2.0 device controller, filtering engine, TAP controller, EEPROM controller, and FIFO controller, with 32 KB of internal packet buffering. This consolidation can reduce external component count in compact industrial or appliance designs. Firmware and host-driver support must be selected for the embedded environment, while the hardware design should follow the official reference schematic, decoupling requirements, exposed-pad thermal layout, and controlled-impedance routing recommendations.
پێشنیارکراو
Test and Measurement Instrumentation
Test and measurement instruments can use the LAN7500-ABZJ to add a compact Gigabit Ethernet connection through USB 2.0. The integrated 10/100/1000 MAC and PHY provide network functionality in one controller, while the 32 KB packet buffer and integrated FIFO controller establish a defined transfer path between interfaces. The filtering engine is also relevant to controlled instrument networks. Before production, verify host-driver compatibility with the acquisition or control software, test sustained packet transfer at the required Ethernet rate, review exposed-pad thermal performance, and use the manufacturer layout guidance to protect USB and Ethernet signal integrity.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN7500-ABZJ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Microchip Technology |
| Package | 56-QFN, 8 mm x 8 mm |
| Product Type | USB 2.0 to 10/100/1000 Ethernet controller |
| USB Interface | Hi-Speed USB 2.0 |
| Supported Ethernet Rates | 10/100/1000 Mb/s |
| Integrated Ethernet MAC | 1 integrated 10/100/1000 Ethernet MAC |
| Integrated Ethernet PHY | 1 integrated 10/100/1000 Ethernet PHY |
| Internal Packet Buffering | 32 KB |
| Core Supply Voltage | 1.2 V |
| I/O Supply Voltage | 2.5 V to 3.3 V |
جیاکەرەوە سەرەکییەکان
- High controller integration (بەراورد بەLAN9500-ABZJ)
- Integrated packet buffering (بەراورد بەLAN7500i variants)
- Multi-rate copper Ethernet support (بەراورد بەLAN9500-ABZJ)
تێبینییەکانی دیزاین
Implement the 56-QFN footprint directly from the Microchip LAN7500/LAN7500i data sheet, including the exposed-pad geometry and land pattern. The exposed pad is part of both the package interface and thermal design, so its solder and via configuration must match the manufacturer recommendation. Confirm courtyard clearance, paste-mask apertures, annulus dimensions, and reflow profile before releasing manufacturing data.
Keep USB 2.0 and Ethernet differential routes away from switching nodes and discontinuous return paths, and follow the reference schematic for series terminations and interface components. Ethernet magnetics and connector placement should follow the manufacturer layout guidance. After schematic capture, review the USB differential pair, Ethernet pairs, clock network, supply returns, and exposed-pad connection together rather than treating them as independent routing problems.
Estimated: thermal performance depends on the exposed-pad copper area, via count, board construction, ambient temperature, and local airflow, so calculate it with the manufacturer's junction-to-ambient model for the final PCB. Use the exposed pad as a heat-spreading structure rather than treating it as an optional ground-only feature. Validate the assembled board at the highest intended ambient temperature and maximum operating workload.
Do not assume that a related LAN7500i or LAN9500 part is drop-in compatible. Verify pin assignments, package dimensions, exposed-pad layout, supply sequencing, clock requirements, firmware support, and host-driver behavior. Also avoid designing around a generic USB-to-Ethernet block diagram: the LAN7500 includes Ethernet filtering, TAP, EEPROM, and FIFO functions whose external implementation and configuration requirements must follow the manufacturer documentation.
زانیاری پابەندبوون
The manufacturer product page and data-sheet listings do not provide a product-specific compliance declaration for this ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Microchip or the authorized channel before release.