Microchip Technology

LAN8720AI-CP - 10/100 RMII Ethernet PHY | Microchip

MPN: LAN8720AI-CP ✓ چالاک
Integrated Vdss 10BASE-T and 100BASE-TX Rds(on) 24-SQFN, 4 mm x 4 mm Package 10 Mbps and 100 Mbps Speed
MOQ: 1 |

LAN8720AI-CP گشتی

The Microchip Technology LAN8720AI-CP is a small-footprint 10BASE-T and 100BASE-TX Ethernet transceiver with an RMII interface, auto-negotiation, and HP Auto-MDIX support. It is supplied in a 24-SQFN package measuring 4 mm by 4 mm and is designed for embedded systems requiring 10/100 Ethernet connectivity with a 50 MHz RMII MAC interface.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts between digital MAC signals and analog signals carried over twisted-pair cabling. The LAN8720AI-CP occupies the PHY level within the Ethernet hierarchy, working alongside an Ethernet MAC rather than replacing it. Its RMII connection reduces the number of parallel data lines required between the PHY and the host controller.

The device supports 10BASE-T and 100BASE-TX operation through automatic speed and duplex negotiation. HP Auto-MDIX allows direct-connect or crossover LAN cables without manual cable selection. It also supports IEEE 802.3-2005 compliant register functions as well as vendor-specific register functions, giving embedded software both standardized and device-specific configuration options.

Microchip identifies the LAN8720A and LAN8720Ai as compact solutions with up to 40% lower power consumption than earlier Microchip transceivers. The family integrates a voltage regulator and ESD-protection components to help reduce bill-of-material requirements. The LAN8720AI-CP connects to an Ethernet MAC through a standard RMII interface and supports both 10 Mbps and 100 Mbps operation.

Typical uses include industrial Ethernet controllers, embedded Linux systems, programmable logic controllers, factory automation equipment, IoT gateways, and compact network adapters. The small 4 mm by 4 mm package also makes the device suitable for space-constrained boards where a conventional magnetics-heavy Ethernet implementation would be difficult to place.

When designing around the LAN8720AI-CP, verify the RMII signal mapping, clock requirements, supply sequencing, magnetics selection, and Ethernet magnetics implementation against the manufacturer datasheet. Layout should keep the digital RMII interface away from the analog magnetics and provide a controlled return path beneath the high-speed differential pairs. Use the manufacturer pin-description table when assigning PCB tracks.

This page combines device identity, package details, interface capabilities, replacement guidance, application engineering notes, and side-by-side alternatives. It is intended to help engineers locate the correct datasheet, assess board compatibility, select companion components, and determine whether a proposed replacement is genuinely pin-compatible rather than merely functionally similar.

جێگرەوەکانی جێگۆڕکێ بۆ LAN8720AI-CP — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN8720AI-CP (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە MAC Interface, Package, Auto-Negotiation.

Microchip Technology
MAC Interface: MII and RMII
Package: 32-QFN
بەراوردکردن لەگەڵ LAN8720AI-CP →
Microchip Technology
MAC Interface: MII, RMII
Package: 24-pin QFN (4x4 mm)
Auto-Negotiation: Yes (speed and duplex)
بەراوردکردن لەگەڵ LAN8720AI-CP →
Microchip Technology
MAC Interface: MII, RMII
Package: 24-pin QFN (4x4 mm)
Auto-Negotiation: Yes (speed and duplex)
بەراوردکردن لەگەڵ LAN8720AI-CP →

LAN8720A-CP-TR

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 24-SQFN (4 mm x 4 mm)
Ethernet PHY Transceiver · 10/100 Mbps · 10BASE-T, 100BASE-TX (IEEE 802.3) · MII, RMII · 3.3 V (single supply, flexPWR) · 1.8 V / 2.5 V / 3.3 V (variable) · HP Auto-MDIX supported · Yes (speed and duplex)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LAN8720A-CP

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 24-SQFN (4 mm x 4 mm)
Ethernet PHY Transceiver · 10/100 Mbps · 10BASE-T, 100BASE-TX (IEEE 802.3) · MII, RMII · 3.3 V (single supply, flexPWR) · 1.8 V / 2.5 V / 3.3 V (variable) · HP Auto-MDIX supported · Yes (speed and duplex)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LAN8710A-EZC-TR

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 24-SQFN (4 mm x 4 mm)
10BASE-T and 100BASE-TX · 10 Mbps and 100 Mbps · Full-duplex · MII and RMII · IEEE 802.3u · Supported · HP Auto-MDIX supported · Direct-connect or crossover LAN cables

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LAN8720AI-CP تایبەتمەندییەکان

Product Type 10/100 Ethernet physical-layer transceiver
Supported Ethernet Speeds 10 Mbps and 100 Mbps
Supported Standards 10BASE-T and 100BASE-TX
MAC Interface RMII
Auto-Negotiation Supported
Auto-MDIX HP Auto-MDIX supported
Register Compatibility IEEE 802.3-2005 compliant and vendor-specific register functions
Integrated Voltage Regulator Integrated
Integrated ESD Protection Integrated
پاکێج 24-SQFN, 4 mm x 4 mm
جۆری دامەزراندن Surface mount
Power Consumption Up to 40% lower than existing Microchip transceivers

ڕێنمایی ڕێکخستنی پینی LAN8720AI-CP 24-sqfn, 4 mm x 4 mm

ڕێکخستنی پین بۆ LAN8720AI-CP (پاکێجی 24-sqfn, 4 mm x 4 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 24-sqfn, 4 mm x 4 mm بۆ LAN8720AI-CP

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN8720AI-CP.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LAN8720AI-CP گونجاوە بۆ 6 بەکارھێنانs: Industrial Ethernet Controller, Embedded Linux Gateway, IoT Sensor Gateway, Programmable Logic Controller, Compact Network Adapter, Factory Automation Node.

🏭

Industrial Ethernet Controller

The LAN8720AI-CP is suitable for an embedded controller that must add a 10/100 Ethernet port without implementing a large parallel MAC interface. Its RMII connection provides a compact digital link to a capable host controller, while auto-negotiation supports 10 Mbps and 100 Mbps operation. HP Auto-MDIX simplifies installation by allowing straight-through or crossover cables. For industrial equipment, confirm the exact temperature grade and isolation requirements, then provide the manufacturer-recommended Ethernet magnetics, termination, and power arrangement. The 24-SQFN, 4 mm by 4 mm package also helps limit board area in compact PLC and automation-controller designs.

🌐

Embedded Linux Gateway

The LAN8720AI-CP can provide the physical layer for an embedded Linux gateway requiring a compact wired Ethernet connection. A 50 MHz RMII interface transfers data between the PHY and a compatible host MAC, while support for both 10BASE-T and 100BASE-TX allows the gateway to operate on common office and industrial networks. Auto-negotiation automatically selects the supported speed and duplex mode. Because the device includes an integrated voltage regulator and ESD protection, the gateway design can simplify the analog-side component count, although external Ethernet magnetics and a complete high-speed layout remain essential.

🧩

IoT Sensor Gateway

The LAN8720AI-CP is appropriate for an IoT gateway that bridges local sensors or embedded modules to a 10/100 Ethernet network. The small 4 mm by 4 mm 24-SQFN package is valuable when the gateway includes radio, memory, and conditioning electronics on the same board. Auto-negotiation and HP Auto-MDIX reduce deployment configuration, while the RMII interface avoids the higher pin count of a full MII implementation. Keep the Ethernet analog section isolated from sensitive sensor circuitry, use a solid ground plane, and apply the manufacturer reference layout to minimize coupling into low-level measurement channels.

🔧

Programmable Logic Controller

The LAN8720AI-CP can add Ethernet communications to a programmable logic controller with an RMII-capable processor or soft MAC. Supporting 10BASE-T and 100BASE-TX gives the controller useful options for both legacy and high-speed network segments, while auto-negotiation simplifies connection management. The compact package preserves board area for I/O modules and isolated interfaces. Because industrial controllers can face long cables and electrically harsh environments, validate isolation, surge protection, magnetics, grounding, and the exact operating-temperature grade rather than assuming compliance from the general Ethernet feature set.

🖥️

Compact Network Adapter

The LAN8720AI-CP is well suited to a compact USB- or embedded-module-based network adapter requiring 10/100 Ethernet. Its RMII interface supports a compact host connection, and the 4 mm by 4 mm package leaves space for magnetics and connectors in space-constrained enclosures. HP Auto-MDIX allows users to connect standard straight-through cables without special crossover knowledge. The layout should separate the RMII and digital ground paths from the transformer-side circuitry, preserve the manufacturer-recommended component placement, and use a PCB stack-up capable of supporting the Ethernet differential impedance requirements.

🏭

Factory Automation Node

The LAN8720AI-CP can support a factory automation node that connects sensors, actuators, or a local HMI over 10/100 Ethernet. Its ability to negotiate 10 Mbps and 100 Mbps allows the node to interoperate with both older and faster network infrastructure, while the integrated regulator and ESD protection help simplify the PHY implementation. For dependable operation, use the manufacturer reference circuit and Ethernet magnetics recommended for industrial cable environments, and confirm whether the exact device variant satisfies the node's temperature and electromagnetic-compatibility requirements.

What is the LAN8720AI-CP?
The LAN8720AI-CP is a Microchip Technology 10/100 Ethernet physical-layer transceiver that connects an Ethernet MAC to 10BASE-T or 100BASE-TX twisted-pair networks. It supports 10 Mbps and 100 Mbps operation through a 50 MHz RMII interface, automatic speed and duplex negotiation, and HP Auto-MDIX. The device is packaged in a compact 24-SQFN, 4 mm by 4 mm package.
Where can I download the LAN8720AI-CP datasheet PDF?
The LAN8720AI-CP datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/00002165B.pdf. This manufacturer document covers the LAN8720A and LAN8720Ai family and should be used for pin assignments, electrical characteristics, register definitions, and application details. Download the document from the manufacturer before finalizing the PCB and firmware configuration.
What are the key specifications of LAN8720AI-CP that engineers should know?
The LAN8720AI-CP is a 10/100 Ethernet PHY with RMII connectivity, operating at 10 Mbps or 100 Mbps. It includes auto-negotiation, HP Auto-MDIX, an integrated voltage regulator, and integrated ESD protection. According to the Microchip LAN8720A/LAN8720Ai datasheet, the device supports IEEE 802.3-2005 and vendor-specific registers and uses a 24-SQFN package measuring 4 mm by 4 mm.
Does LAN8720AI-CP support 100BASE-TX and Auto-MDIX?
Yes, the LAN8720AI-CP supports 100BASE-TX at 100 Mbps as well as 10BASE-T at 10 Mbps. HP Auto-MDIX enables automatic handling of straight-through and crossover Ethernet cables. According to the Microchip LAN8720A/LAN8720Ai datasheet, auto-negotiation also selects the best supported speed and duplex mode, simplifying connection to switches and other network equipment.
What is the LAN8720AI-CP pinout and package?
The LAN8720AI-CP uses a 24-SQFN package measuring 4 mm by 4 mm. Use the pin-description table and package drawing in the Microchip LAN8720A/LAN8720Ai datasheet to identify every power, ground, RMII, and analog connection. The QFN-24 package drawing used for schematic and PCB work should be checked against the exact lead orientation and exposed-pad requirements shown for the ordered device.
What interface does LAN8720AI-CP use to connect to a microcontroller?
The LAN8720AI-CP connects to its Ethernet MAC through a standard RMII interface and supports 10 Mbps and 100 Mbps operation. A suitable host controller must provide the compatible RMII signaling and clocking arrangement. The Microchip datasheet supports the LAN8720AI-CP as a compact PHY solution for embedded systems requiring a wired Ethernet connection without the wider parallel bus used by older MII implementations.
Where can I buy LAN8720AI-CP online?
Use the Request a Quote form on this page to request LAN8720AI-CP availability, current lead time, and the exact package or shipment configuration needed for your build. The manufacturer product listing identifies the LAN8720AI-CP as an Ethernet interface IC with HP Auto-MDIX support. Quote requests help confirm the precise suffix, standard quantity, and delivery details before an order is placed.
What is the price of LAN8720AI-CP?
Request a current quotation for LAN8720AI-CP through the Request a Quote form on this page. The final price depends on the exact ordering suffix, shipment configuration, order quantity, and current channel availability. This page does not reproduce a static price because commercial terms can change and would otherwise risk becoming inaccurate before an order is placed.
What is the lead time for LAN8720AI-CP?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with the exact ordering suffix, requested shipment configuration, quantity, and factory availability. The Microchip direct product page reports inventory and incoming factory stock, so including the required quantity and tray or reel configuration in the quote request will allow fulfillment details to be confirmed.
Is LAN8720AI-CP in stock?
The Microchip direct product page lists the LAN8720AI-CP as in stock and also reports incoming factory stock. Actual availability for a specific quantity should be confirmed through the Request a Quote form on this page, including the required package suffix and shipment configuration. This avoids treating a general inventory indication as a reservation for a particular production order.
What can replace LAN8720AI-CP?
LAN8720A-CP-TR is the closest documented drop-in candidate because a cross-reference source identifies the same package and pinout with identical electrical specifications. LAN8720A-CP is another family member to evaluate, while LAN8710A-EZC-TR is only a similar 10/100 RMII device and may require pin-mapping review. Confirm the exact footprint, exposed pad, strap resistors, and register behavior before replacing a LAN8720AI-CP.
Is LAN8720AI-CP the same as LAN8720A-CP?
The two devices belong to the same Microchip LAN8720 family and support the same core 10/100 Ethernet, RMII, auto-negotiation, and HP Auto-MDIX functions, but the AI ordering designation indicates a distinct device variant. Check the manufacturer datasheet and comparison listings for temperature, ordering-suffix, and qualification differences before treating LAN8720A-CP as a drop-in replacement for LAN8720AI-CP.
When should I choose LAN8720AI-CP over LAN8720A-CP-TR?
Choose the variant whose ordering suffix, temperature range, qualification, and permitted shipment method exactly match the production design. The cross-reference information identifies LAN8720A-CP-TR as having the same package and pinout with identical electrical specifications, making it a strong replacement candidate when those ordering requirements match. The ordered MPN and assembly packing must still be confirmed before release to manufacturing.
Is LAN8720AI-CP suitable for industrial Ethernet equipment?
The LAN8720AI-CP is suitable for embedded Ethernet designs that require 10/100 connectivity, RMII integration, auto-negotiation, and HP Auto-MDIX. Its compact 4 mm by 4 mm package helps reduce board area, while the integrated regulator and ESD protection can simplify the surrounding circuitry. Confirm the exact temperature rating and functional-safety or regulatory requirements before using it in a final industrial product.
What is the best Microchip equivalent for LAN8720AI-CP?
LAN8720A-CP-TR is the best documented Microchip drop-in candidate in the available cross-reference information because it is described as having the same package and pinout and identical electrical specifications. It should be considered first when the ordering and temperature requirements match. LAN8710A-EZC-TR supports similar 10/100 RMII operation but is not established as pin-for-pin compatible and therefore requires a design review.
What design checks are required for a LAN8720AI-CP Ethernet interface?
Verify the RMII clock, signal mapping, strap configuration, supply requirements, Ethernet magnetics, and reset or power-sequencing requirements against the Microchip datasheet. Keep RMII routing away from the analog magnetics section, provide a continuous ground reference, and route the Ethernet differential pairs as controlled-impedance pairs. Confirm the exposed-pad connection and land pattern using the package drawing before release.

داتای سەرچاوەی ئەندازیاری بۆ LAN8720AI-CP — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the LAN8720AI-CP when a compact board needs a dedicated 10/100 Ethernet PHY with RMII, automatic speed and duplex negotiation, HP Auto-MDIX, an integrated regulator, and integrated ESD protection. Consider LAN8720A-CP-TR when its exact ordering suffix and temperature grade meet the production requirements and a direct replacement is desired; cross-reference information describes it as having the same package, pinout, and electrical specifications. Use LAN8720A-CP only after confirming that the non-AI designation has the required temperature and qualification status. LAN8710A-EZC-TR supports a similar 10/100 RMII function, but its device-specific pin and register differences require review. For a design needing Ethernet MAC functionality beyond the PHY, evaluate LAN9353T/PT or LAN9353T/ML as higher-integration alternatives rather than assuming they share the same footprint.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LAN8720A-CP-TR LAN8720A-CP LAN8710A-EZC-TR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-SQFN (4 mm x 4 mm) 24-SQFN (4 mm x 4 mm) 24-SQFN (4 mm x 4 mm) 24-SQFN (4 mm x 4 mm)
Ethernet Speed Support 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Supported Physical Modes 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX 10BASE-T and 100BASE-TX
MAC Interface RMII RMII RMII RMII
Auto-Negotiation Supported Supported Supported Supported
Auto-MDIX HP Auto-MDIX supported HP Auto-MDIX supported HP Auto-MDIX supported HP Auto-MDIX supported
Register Support IEEE 802.3-2005 compliant and vendor-specific functions IEEE 802.3-2005 compliant and vendor-specific functions IEEE 802.3-2005 compliant and vendor-specific functions IEEE 802.3-2005 compliant and vendor-specific functions
Integrated Voltage Regulator Integrated Integrated Integrated Integrated

جیاکەرەوە سەرەکییەکان

  • Compact integrated PHY implementation (بەراورد بەLAN8710A-EZC-TR)
  • Documented electrical equivalence for replacement (بەراورد بەLAN8720A-CP-TR)
  • Automatic cable and link adaptation (بەراورد بەLAN8720A-CP)

تێبینییەکانی دیزاین

Use the manufacturer reference layout for the 24-SQFN device, Ethernet magnetics, center-tap capacitors, and termination network. Place the PHY and magnetics toward the RJ45 or board connector, while keeping the RMII route toward the host controller. Provide a continuous ground plane, avoid routing digital signals beneath the analog network, and match the differential trace geometry to the selected PCB stack-up.

Treat RMII as a timing-sensitive digital interface even though its clock is comparatively low speed. Keep the clock and data traces short, route them over an uninterrupted ground reference, avoid unnecessary stubs, and observe the host timing requirements. Do not assume software can compensate for incorrect edge placement, excessive loading, or a poorly isolated clock source; verify timing at the PHY pins.

Do not substitute the PHY solely because the package drawing and nominal Ethernet speed match. Confirm the exact RMII pin mapping, strap configuration, reset behavior, supply requirements, register addresses, temperature grade, and exposed-pad connection. A direct replacement should also be checked for differences in LED output behavior, clock-source requirements, interrupt polarity, and device-specific PHY registers.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The IEEE 802.3-2005 reference concerns Ethernet register compatibility, not product qualification. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is identified for the exact ordering variant.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

lan8720ai cp tr abc lan8720ai cp abc lan8720ai cp tr datasheet lan8720ai cp datasheet lan8720ai datasheet LAN8720AI-CP pinout LAN8720AI-CP equivalent LAN8720AI-CP drop-in replacement LAN8720AI-CP vs LAN8720A-CP-TR LAN8720AI-CP 24-SQFN pinout LAN8720AI-CP RMII application circuit LAN8720AI-CP price LAN8720AI-CP stock Microchip LAN8720AI-CP

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology LAN8720AI-CP LAN8720A-CP-TR LAN8720A-CP LAN8710A-EZC-TR LAN8710A-EZC LAN9353T/PT LAN9353T/ML Ethernet PHY Ethernet physical-layer transceiver 10BASE-T 100BASE-TX RMII Auto-Negotiation HP Auto-MDIX IEEE 802.3-2005 24-SQFN QFN-24 surface-mount package integrated voltage regulator ESD protection Ethernet magnetics embedded Ethernet industrial automation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ