LAN8742AI-CZ - 10/100 Ethernet PHY | Microchip Technology
MPN: LAN8742AI-CZ ✓ چالاکLAN8742AI-CZ گشتی
An Ethernet PHY, also called a physical-layer transceiver, converts digital data into electrical signals for transmission over twisted-pair cabling and converts received signals into data for the host controller. The LAN8742AI-CZ sits between an Ethernet transformer or magnetics and an RMII-compatible embedded host. In the hierarchy of network interfaces, it is a physical-layer IC within the Ethernet transceiver and interface-controller category.
The LAN8742AI-CZ offers a 1.8 V to 3.3 V operating range, as identified for this part in the supplier listing. Its integrated low-power features and Wake-on-LAN capability suit systems that need to reduce activity during idle periods. Auto-negotiation automatically establishes the best supported speed and duplex mode, while auto-polarity correction prevents incorrect operation when cable polarity is reversed. HP Auto-MDIX removes the requirement to distinguish straight-through and crossover cables at the connector.
The LAN8742AI-CZ is also described as supporting cable diagnostics, which can help embedded equipment identify wiring faults during installation or field maintenance. Its small 4 x 4 mm SQFN package supports compact PCB layouts, but the exposed pad and high-speed interface require careful thermal, grounding, and signal-integrity implementation. Microchip provides a dedicated LAN8742 QFN routing checklist that specifies connecting the exposed digital-ground pad to an internal ground plane with a 2 x 2 grid of four power vias.
Typical applications include industrial Ethernet controllers, embedded Linux systems, network appliances, consumer electronics, USB-to-Ethernet equipment, and IoT gateways. The RMII interface is particularly appropriate for microcontrollers and application processors that provide a parallel Ethernet MAC interface. Selection should consider magnetics compatibility, firmware driver support, cable-diagnostic behavior, operating-temperature requirements, and the precise board-level implementation guidance.
For reliable operation, follow the manufacturer datasheet for pin assignments, external component values, crystal or clock requirements, and layout clearances. Treat the exposed pad as a thermal and electrical connection rather than an unused lead. Validate the completed board for RMII timing, Ethernet magnetics integration, return-loss performance, radiated emissions, and cable insertion before production.
This page combines the manufacturer part information, supplier listings, package details, interface capabilities, drop-in family options, and practical PCB guidance into a focused engineering reference. It also distinguishes confirmed electrical characteristics from parameters that still require the manufacturer datasheet for final design verification.
جێگرەوەکانی جێگۆڕکێ بۆ LAN8742AI-CZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN8742AI-CZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Auto-Negotiation, Cable Diagnostics, HP Auto-MDIX, Product Type.
LAN8742AI-CZ-TR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LAN8742A-CZ-TR
✅ جێگرەوەی ڕاستەوخۆ✓ بەردەستە
$0.7383 / یەکە
بینینی داتاشیت →LAN8742-CZ-TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN8742AI-CZ تایبەتمەندییەکان
| Device Type | 10/100 Fast Ethernet PHY transceiver |
| Ethernet Speeds | 10 Mb/s and 100 Mb/s |
| Supported Physical Layers | 10BASE-T and 100BASE-TX |
| Host Interface | RMII |
| Supply Voltage Range | 1.8 V to 3.3 V |
| Auto-Negotiation | Supported |
| Auto-Polarity Correction | Supported |
| HP Auto-MDIX | Supported |
| Wake-on-LAN | Supported |
| Cable Diagnostics | Supported |
| Low-Power Technology | flexPWR |
| پاکێج | 24-SQFN, 4 mm x 4 mm |
| جۆری دامەزراندن | Surface mount |
| Number of Transceivers | 1 |
| IEEE Standards | IEEE 802.3 and IEEE 802.3u |
| Application Markets | Consumer, embedded, and industrial |
ڕێنمایی ڕێکخستنی پینی LAN8742AI-CZ 24-sqfn, 4 mm x 4 mm
ڕێکخستنی پین بۆ LAN8742AI-CZ (پاکێجی 24-sqfn, 4 mm x 4 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN8742AI-CZ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN8742AI-CZ گونجاوە بۆ 6 بەکارھێنانs: Industrial Embedded Ethernet Controller, USB-to-Ethernet Adapter, Network Appliance, IoT Gateway, Consumer Network Equipment, Industrial Cable Diagnostics.
Industrial Embedded Ethernet Controller
The LAN8742AI-CZ fits embedded systems that need a compact 10/100 Ethernet endpoint with an RMII host interface. It connects a host MAC to copper Ethernet magnetics while handling 10BASE-T and 100BASE-TX signaling, auto-negotiation, and auto-polarity correction. The 1.8 V to 3.3 V supply range supports systems operating from common 1.8 V and 3.3 V rails. Its industrial-oriented family designation makes it a sensible starting point for factory controllers, programmable HMIs, and industrial gateways, subject to confirmation of the exact temperature limits and production firmware requirements.
پێشنیارکراو
USB-to-Ethernet Adapter
A USB-to-Ethernet adapter can place the LAN8742AI-CZ between a USB-to-Ethernet controller and an RJ45 magnetic module. The PHY handles physical-layer encoding and decoding at 10 Mb/s or 100 Mb/s, while the host controller manages packet traffic and the USB interface. HP Auto-MDIX allows direct and crossover cables to be used without cable-specific firmware. The compact 24-SQFN, 4 mm x 4 mm package helps keep adapter PCBs small, while cable diagnostics can assist installation troubleshooting when supported by the host driver.
پێشنیارکراو
Network Appliance
The LAN8742AI-CZ is suitable for compact network appliances requiring one wired 10/100 port and a low-power physical-layer implementation. Its RMII interface reduces host pin count compared with parallel MII implementations, while Wake-on-LAN functionality supports systems that must detect remote activity during low-power states. Auto-negotiation allows the link endpoint to select the best supported speed and duplex mode. Designers should pair the PHY with qualified Ethernet magnetics and validate link performance, emissions, and thermal behavior across the intended operating environment.
پێشنیارکراو
IoT Gateway
The LAN8742AI-CZ can provide wired Ethernet connectivity for an IoT gateway that bridges local sensors or embedded systems to a wider network. The 1.8 V to 3.3 V operating range supports embedded digital power systems, and the small footprint supports densely populated gateway designs. HP Auto-MDIX improves installation flexibility, while auto-polarity correction avoids incorrect link operation from miswired cables. Wake-on-LAN can reduce system activity while preserving remote network wake-up. Firmware must correctly initialize the PHY registers, provide an RMII timing configuration, and coordinate external magnetics and connector selection.
پێشنیارکراو
Consumer Network Equipment
The LAN8742AI-CZ can serve as the Ethernet physical layer in compact consumer products such as set-top equipment, smart-home controllers, and network print servers. Its 10/100 capability provides broad compatibility with existing Fast Ethernet infrastructure, and auto-negotiation removes manual speed configuration. The small 24-SQFN footprint preserves board area for connectors, storage, or radio circuitry. For consumer designs, verify low-power behavior in every system state, confirm the required driver support for Wake-on-LAN and cable diagnostics, and apply the manufacturer's exposed-pad and high-speed layout guidance.
پێشنیارکراو
Industrial Cable Diagnostics
The LAN8742AI-CZ supports cable diagnostics, making it useful in network equipment that helps installers identify wiring faults. When the connected host software supports the diagnostic functions, the PHY can assist with cable-status assessment over a 10/100BASE-T link. This is valuable in industrial gateways, test equipment, and remote-access products where field troubleshooting must be fast and automation-friendly. HP Auto-MDIX permits either cable orientation, and auto-polarity correction maintains operation when polarity is reversed. The production design should still include the specified magnetics, termination, isolation, and protection network around the Ethernet connector.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN8742AI-CZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN8742AI-CZ-TR | LAN8742A-CZ-TR | LAN8742-CZ-TR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SQFN, 4 mm x 4 mm | 24-SQFN, 4 mm x 4 mm | 24-SQFN, 4 mm x 4 mm | 24-SQFN, 4 mm x 4 mm |
| Ethernet Function | 10/100 Fast Ethernet PHY | 10/100 Fast Ethernet PHY | 10/100 Fast Ethernet PHY | 10/100 Fast Ethernet PHY |
| Host Interface | RMII | RMII | RMII | RMII |
جیاکەرەوە سەرەکییەکان
- Temperature-grade positioning (بەراورد بەLAN8742A-CZ-TR)
- Closest ordering alternative (بەراورد بەLAN8742AI-CZ-TR)
- Compact single-port integration (بەراورد بەLAN8742-CZ-TR)
تێبینییەکانی دیزاین
Follow the Microchip LAN8742 QFN routing checklist for the exposed pad. Connect the single digital-ground pin and exposed pad directly to a solid, contiguous internal ground plane, then use four power vias in a 2 x 2 grid to tie the component-side pad to the plane. Preserve a continuous return path beneath the device and avoid routing disruptive digital signals through the Ethernet and power-distribution regions.
Treat the RMII clock and data paths as a matched, constrained interface. Follow the datasheet and routing checklist for clock topology, trace lengths, impedance, vias, and test points; do not infer these values from another LAN8742 variant. Keep the PHY, crystal or clock source, decoupling network, and magnetics placement consistent with the reference layout because small timing or return-path deviations can affect link margins.
Do not substitute an Ethernet PHY solely because the data rate matches. Confirm the exact package, exposed-pad construction, pin assignment, supply range, temperature grade, RMII electrical characteristics, magnetics interface, and host-driver support. The I suffix in LAN8742AI denotes a different qualification and temperature positioning from LAN8742A, so a footprint-compatible part can still be unsuitable for an industrial environmental requirement.
Place the PHY and its decoupling network close to the associated Ethernet magnetics, and use the shortest practical connection between the PHY analog-side network and the transformer. Maintain the recommended ground-plane continuity and keep switching supplies, high-speed clocks, and external connectors away from sensitive network nodes. Validate radiated emissions and conducted emissions at the finished-product level because compliance depends on the complete PCB and enclosure.
Use the supply rails and bypass capacitors specified by the manufacturer, and confirm which PHY pins belong to each supply domain before assembly. The supported 1.8 V to 3.3 V range does not mean that every rail or internal supply can be tied together. Separate analog and digital supply filtering where recommended, and verify startup sequencing, current consumption, and low-power transitions under the host's intended Wake-on-LAN policy.
زانیاری پابەندبوون
The manufacturer product page confirms IEEE 802.3 and IEEE 802.3u compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not confirmed for the exact MPN in the available manufacturer and supplier information.