Microchip Technology

LAN91C93I-ME 10BASE-T Ethernet Controller | Microchip

MPN: LAN91C93I-ME ✓ چالاک
100-pin TQFP Package 10 Mb/s Speed
MOQ: 1 |

LAN91C93I-ME گشتی

The Microchip Technology LAN91C93I-ME is a non-PCI single-chip full-duplex Ethernet controller with an integrated 10BASE-T PHY interface, supplied in a 100-pin TQFP package. It is designed for local-bus systems and supports independent transmit and receive operations. The manufacturer identifies the LAN91C93I as 100% software-compatible with the LAN91C92, LAN91C94, and LAN91C96 in local-bus mode.

An Ethernet controller is an interface IC that connects a processor or embedded host to an Ethernet physical layer. In this device, the controller and 10BASE-T PHY functions are integrated into one device. That integration reduces the number of external interface components required in an embedded Ethernet design while retaining a direct local-bus software interface. The Ethernet controller category belongs to the broader network-interface hierarchy: Ethernet controller → network interface IC → interface IC → semiconductor.

The principal feature is support for full-duplex switched Ethernet with independent transmit and receive paths. Full-duplex operation allows each direction to be active simultaneously, which improves link utilization compared with a shared half-duplex arrangement. The integrated 10BASE-T interface also provides compatibility with 10 Mb/s Ethernet infrastructure. The -ME ordering code identifies the specific package and product configuration, while the -I family designation denotes the industrial-oriented LAN91C93I device family described by Microchip.

The LAN91C93I architecture incorporates LAN91C92 local-bus functionality and extends it for switched full-duplex Ethernet. According to the manufacturer datasheet, independent transmit and receive operations allow the controller to manage both traffic directions concurrently. Existing local-bus software can also be reused because the LAN91C93I is stated to be 100% software-compatible with LAN91C92, LAN91C94, and LAN91C96 when operated in local-bus mode.

Typical uses include embedded industrial controllers, local-bus embedded systems, legacy platform upgrades, and equipment that requires a dedicated 10BASE-T network interface without PCI. Its software continuity makes it especially relevant when an existing local-bus network stack must be retained while the physical network is converted to full-duplex switched Ethernet. Careful initialization, bus timing, and PHY integration remain essential during board bring-up.

For a new design, first confirm that the host bus, address map, interrupt structure, and Ethernet driver expectations match the LAN91C93I register and software model. Review the manufacturer datasheet pin-description table and typical application circuit before assigning signals or laying out the 100-pin TQFP footprint. Also verify the selected magnetic-component and Ethernet-connector implementation against the required 10BASE-T topology.

This product page combines the verified manufacturer overview, package information, software-compatibility relationships, application guidance, and practical selection criteria. It also distinguishes confirmed drop-in candidates from options that require board-level verification, helping engineers compare legacy Ethernet-controller options without treating software equivalence as automatic hardware equivalence.

جێگرەوەکانی جێگۆڕکێ بۆ LAN91C93I-ME — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN91C93I-ME (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package Type, Supply Voltage, Device Type, Duplex Support, Ethernet Speed.

Microchip Technology
Package Type: 100-QFP
Supply Voltage: 3.3 V or 5 V
Duplex Support: Full-duplex switched Ethernet
بەراوردکردن لەگەڵ LAN91C93I-ME →
Microchip Technology
Package Type: 100-TQFP (14 x 14 mm), green
Supply Voltage: 3.3 V
Device Type: Non-PCI single-chip full-duplex Ethernet controller
بەراوردکردن لەگەڵ LAN91C93I-ME →
Microchip Technology
Package Type: QFP-100, green
Supply Voltage: 3.3 V
Device Type: LOCAL AREA NETWORK CONTROLLER
بەراوردکردن لەگەڵ LAN91C93I-ME →

LAN91C92

✅ جێگرەوەی ڕاستەوخۆ
📦 TQFP-100
Local-bus software compatibility is 100%; Ethernet feature differences versus LAN91C93I are not quantified in the manufacturer overview.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LAN91C94

✅ جێگرەوەی ڕاستەوخۆ
📦 TQFP-100
Local-bus software compatibility is 100%; LAN91C94-specific hardware features are not quantified in the manufacturer overview.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LAN91C96-MS

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 TQFP-100
LOCAL AREA NETWORK CONTROLLER · CMOS · 10/100 Mbps · 3.3 V · -40 °C to 85 °C · QFP-100, green · 14 x 20 mm · 100 pins

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LAN91C93I-MS

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 TQFP-100
Single-chip Ethernet controller · IEEE 802.3 · 10 Mbps · 10BASE-T PHY interface · Local bus, non-PCI · Full-duplex switched Ethernet · Fully independent transmit and receive operations · 3.3 V or 5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LAN91C93I-ME تایبەتمەندییەکان

Product Type Non-PCI single-chip full-duplex Ethernet controller
Ethernet Speed 10 Mb/s
Physical Layer Interface 10BASE-T
Duplex Support Full duplex
Transmit and Receive Operation Fully independent
Bus Mode Local bus
Software Compatibility 100% with LAN91C92, LAN91C94, and LAN91C96 in local-bus mode
Host Interface Type Non-PCI local-bus interface
پاکێج 100-pin TQFP
Ethernet Connector Support 10BASE-T

ڕێنمایی ڕێکخستنی پینی LAN91C93I-ME 100-pin tqfp

ڕێکخستنی پین بۆ LAN91C93I-ME (پاکێجی 100-pin tqfp). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 100-pin tqfp بۆ LAN91C93I-ME

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN91C93I-ME.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LAN91C93I-ME گونجاوە بۆ 6 بەکارھێنانs: Embedded Industrial Ethernet Controller, Legacy Platform Ethernet Upgrade, Full-Duplex Switched Network Equipment, Data Acquisition and Test Systems, Printers and Office Peripherals, Networked Control and Monitoring Equipment.

🏭

Embedded Industrial Ethernet Controller

The LAN91C93I-ME fits embedded industrial equipment that connects a local-bus processor directly to a 10BASE-T network without requiring a PCI bus interface. Its integrated 10BASE-T PHY reduces the number of external network-interface devices, while full-duplex switched operation supports simultaneous bidirectional communications. Independent transmit and receive paths are useful where the controller must maintain responsive network traffic during ongoing data transfer. Because the LAN91C93I is 100% software-compatible with the LAN91C92, LAN91C94, and LAN91C96 in local-bus mode, it can simplify maintenance of established driver architectures. Board bring-up should still validate local-bus timing, reset behavior, clock configuration, and the selected 10BASE-T magnetics interface.

🖥️

Legacy Platform Ethernet Upgrade

The LAN91C93I-ME is suited to upgrading an established embedded platform from an older local-bus Ethernet architecture to switched full-duplex networking. The manufacturer’s 100% local-bus software-compatibility statement across LAN91C92, LAN91C94, and LAN91C96 can preserve much of the existing software interface, reducing driver-development effort. The 10BASE-T physical-layer function remains integrated into the controller, while independent transmit and receive operation supports concurrent traffic. Migration planning should compare the legacy device’s pin assignment, clock and power requirements, transceiver connections, and interrupt behavior against the LAN91C93I datasheet before the PCB and firmware are changed.

🌐

Full-Duplex Switched Network Equipment

The LAN91C93I-ME can provide the Ethernet-facing controller for instrument and control equipment connected to a switched 10BASE-T network. Full-duplex operation allows information to be transmitted and received simultaneously, while the fully independent transmit and receive paths reduce the operational limitations of shared-medium networking. The non-PCI local-bus organization is appropriate for processors that connect peripherals through a dedicated host bus rather than a PCI bus. Designers should reserve the required support components, review the manufacturer application diagram, and validate timing at the intended host-bus frequency. Firmware must also implement the initialization and status-handling sequence defined for the selected LAN91C93I configuration.

📡

Data Acquisition and Test Systems

The LAN91C93I-ME is appropriate for data-acquisition and test systems that transfer measurements over a dedicated 10BASE-T network using a local-bus host processor. Full-duplex operation permits measurement data and control traffic to coexist on the same switched network, while independent transmit and receive functions help the controller maintain flow during simultaneous transfers. Software continuity with three related LAN91C families can ease long-term maintenance of existing acquisition software. For reliable deployment, verify the bus bandwidth needed for the selected data rate, implement appropriate buffering in the host driver, and validate error handling for link changes and network congestion against the manufacturer datasheet.

🖨️

Printers and Office Peripherals

The LAN91C93I-ME can serve as the network interface in an embedded printer or office peripheral that uses a local-bus processor and requires 10BASE-T Ethernet. The integrated controller and PHY provide a compact networking path, while full-duplex switched Ethernet supports simultaneous printing traffic and network control messages. Independent transmit and receive operation is valuable when a peripheral must exchange status information while transmitting larger job data. The 100-pin TQFP footprint demands careful fanout and signal-integrity layout, particularly around clock, reset, and Ethernet interface signals. Confirm magnetic-component selection, isolation requirements, and firmware behavior before approving a new printer design.

📺

Networked Control and Monitoring Equipment

The LAN91C93I-ME fits monitoring and control equipment that must expose a 10BASE-T connection without using a PCI interface. A local-bus host can retain an established driver model because the LAN91C93I is software-compatible with the LAN91C92, LAN91C94, and LAN91C96 in local-bus mode. Full-duplex operation supports simultaneous command traffic and status reporting, and independent transmit and receive paths improve responsiveness under bidirectional workloads. Designers should account for watchdog and reset behavior, link-status handling, and the timing margin of the host bus. A hardware bring-up sequence should test startup before link establishment and confirm recovery after cable insertion, removal, and network interruption.

کورتەی بەرهەمە پێشنیارکراوەکان

LAN91C93I-MS Microchip Technology بەکارهێنراوە لە: Embedded Industrial Ethernet Controller, Full-Duplex Switched Network Equipment, Printers and Office Peripherals LAN91C92 Software-compatible local-bus controller family بەکارهێنراوە لە: Embedded Industrial Ethernet Controller, Legacy Platform Ethernet Upgrade, Networked Control and Monitoring Equipment LAN91C94 Compatible controller family member بەکارهێنراوە لە: Legacy Platform Ethernet Upgrade, Data Acquisition and Test Systems, Networked Control and Monitoring Equipment LAN91C96 Compatible controller family member بەکارهێنراوە لە: Legacy Platform Ethernet Upgrade, Data Acquisition and Test Systems, Networked Control and Monitoring Equipment
What is the LAN91C93I-ME?
The LAN91C93I-ME is a non-PCI, single-chip full-duplex Ethernet controller with an integrated 10BASE-T PHY interface. It is packaged as a 100-pin TQFP and is intended for local-bus embedded systems. According to the manufacturer datasheet, the controller supports fully independent transmit and receive operations and is 100% software-compatible with the LAN91C92, LAN91C94, and LAN91C96 in local-bus mode.
Where can I download the LAN91C93I-ME datasheet PDF?
The LAN91C93I-ME datasheet can be downloaded from the Microchip PDF identified as “Non-PCI Single-Chip Full Duplex Ethernet Controller.” It documents the LAN91C93I architecture, local-bus software compatibility, full-duplex operation, pin assignments, electrical characteristics, and application information. The PDF is the authoritative source for board-level signal assignment, timing, power, and PCB-layout decisions.
Where can I find the LAN91C93I-ME pinout?
The LAN91C93I-ME pinout is documented in the manufacturer LAN91C93I datasheet under the pin-description and package information sections. The device uses a 100-pin TQFP package, so every footprint pad must be checked against that table before layout release. Pay particular attention to local-bus signals, Ethernet magnetics interfaces, clocks, resets, power supplies, and exposed or no-connect pins.
Is the LAN91C93I-ME a 10BASE-T Ethernet controller?
Yes, the LAN91C93I-ME is a 10BASE-T Ethernet controller operating at 10 Mb/s. Its Ethernet and physical-layer functions are integrated into one device, reducing the external circuitry required for a 10BASE-T network connection. The manufacturer also describes support for full-duplex switched Ethernet with fully independent transmit and receive operations.
What does 100% software-compatible mean for the LAN91C93I?
The LAN91C93I is 100% software-compatible with the LAN91C92, LAN91C94, and LAN91C96 in local-bus mode. This means an appropriately configured software model can be retained when moving among those controller families in the supported operating mode. Software compatibility does not by itself guarantee that every package, clock, voltage, or peripheral configuration is interchangeable.
What can replace the LAN91C93I-ME?
The closest manufacturer-family candidates are the LAN91C92, LAN91C94, and LAN91C96 because the LAN91C93I is stated to be software-compatible with them in local-bus mode. A true drop-in replacement still requires confirmation of identical TQFP pinout, supply voltage, clock requirements, initialization sequence, and transceiver functions. Treat family-level software compatibility as a starting point for validation rather than proof of unconditional PCB interchangeability.
Can LAN91C93I-MS replace LAN91C93I-ME?
The LAN91C93I-MS is the same 100-pin LAN91C93I controller family and is identified as an Ethernet controller with a 10BASE-T PHY interface in a 100-QFP package. Its exact ordering-code temperature, screening, or lifecycle terms must be confirmed against the LAN91C93I-ME ordering information before substitution. Package and controller-family identity alone do not establish every qualification detail.
LAN91C93I-ME vs LAN91C92 — which is better for a local-bus design?
Choose the LAN91C93I-ME when the design needs full-duplex switched Ethernet and independent transmit and receive operation while retaining the supported local-bus software model. Choose the LAN91C92 when an established design depends specifically on that device's original hardware and software configuration. The manufacturer states that the LAN91C93I is 100% software-compatible with the LAN91C92 in local-bus mode.
When should I choose LAN91C93I-ME over LAN91C94 or LAN91C96?
Choose the LAN91C93I-ME when a new design specifically targets the full-duplex switched-Ethernet implementation of the LAN91C93 family and its local-bus software interface. The LAN91C94 and LAN91C96 are relevant alternatives because the manufacturer lists them as software-compatible in local-bus mode, but their individual feature sets may better match other networking requirements. Compare hardware registers, transceiver needs, and application diagrams before selection.
Is the LAN91C93I-ME suitable for industrial embedded systems?
The LAN91C93I-ME is suitable for embedded systems that need a non-PCI local-bus interface and 10BASE-T Ethernet connectivity. Its full-duplex operation and independent transmit and receive paths suit switched-network equipment and industrial controllers requiring simultaneous bidirectional traffic. The exact temperature range and qualification status must be checked in the ordering information and manufacturer datasheet before release to production.
Does the LAN91C93I-ME support full-duplex Ethernet?
Yes, the LAN91C93I-ME supports full-duplex switched Ethernet with fully independent transmit and receive operations. This architecture allows the controller to handle both directions concurrently, avoiding the shared-medium behavior associated with half-duplex operation. The feature is explicitly identified in the manufacturer datasheet for the LAN91C93I family.
Where can I buy LAN91C93I-ME and check its lead time?
Use the “Request a Quote” form on this page to ask about LAN91C93I-ME availability, current lead time, minimum order quantity, and order quantity. The form connects the request directly with XAIPART’s sales process and avoids publishing a price or stock statement that may become outdated. Include the required date code, packaging format, and target quantity in the request.
What is the price of the LAN91C93I-ME?
Current pricing for the LAN91C93I-ME is handled through the “Request a Quote” form on this page. Quote requests should include the required quantity, packaging preference, date-code constraint, and ship-to location. Structured pricing is rendered separately from this technical content so that the commercial information can remain current.
Is the LAN91C93I-ME in stock?
Current stock status for the LAN91C93I-ME should be confirmed through the “Request a Quote” form on this page. Include your required quantity and target delivery date so the response can reflect the relevant order configuration. The listing is positioned as an order-on-request product rather than publishing a potentially stale in-stock claim.
What are the key specifications engineers should know about LAN91C93I-ME?
The LAN91C93I-ME is a non-PCI, single-chip Ethernet controller with an integrated 10BASE-T interface, 10 Mb/s operation, full-duplex support, independent transmit and receive paths, and a 100-pin TQFP package. Its primary engineering advantage is local-bus software continuity: the manufacturer states 100% compatibility with LAN91C92, LAN91C94, and LAN91C96 in local-bus mode.
What is the best Microchip equivalent for LAN91C93I-ME?
The best-supported equivalent family is the LAN91C93I, represented by the LAN91C93I-MS ordering variant, because it shares the same controller identity, 10BASE-T interface, and 100-pin package description. For broader replacements, the LAN91C92, LAN91C94, and LAN91C96 are supported by the manufacturer’s software-compatibility statement. Pin, voltage, clock, and transceiver equivalence must still be validated before a drop-in substitution.

داتای سەرچاوەی ئەندازیاری بۆ LAN91C93I-ME — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the LAN91C93I-ME for a local-bus embedded design that specifically requires a non-PCI Ethernet controller, integrated 10BASE-T connectivity, and full-duplex switched operation. Its stated 100% local-bus-mode software compatibility with the LAN91C92, LAN91C94, and LAN91C96 makes it valuable when maintaining an established driver architecture. Select the LAN91C92 when its original hardware configuration is already proven and the added full-duplex behavior is unnecessary. Evaluate the LAN91C94 or LAN91C96 when their specific hardware features better satisfy a legacy platform, but confirm every register, clock, power, and transceiver difference. The LAN91C93I-MS is the closest family variant for a 100-pin substitution review. Before releasing a replacement, compare the exact pin table, ordering information, electrical limits, initialization sequence, and Ethernet magnetics circuit; software compatibility by itself does not establish unconditional drop-in interchangeability.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LAN91C92 LAN91C94 LAN91C96 LAN91C93I-MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 100-pin TQFP TQFP-100 TQFP-100 TQFP-100 100-QFP
Local-Bus Software Compatibility 100% with LAN91C92, LAN91C94, and LAN91C96 100% with LAN91C93I in local-bus mode 100% with LAN91C93I in local-bus mode 100% with LAN91C93I in local-bus mode Same LAN91C93I controller family

جیاکەرەوە سەرەکییەکان

  • Full-duplex switched Ethernet with independent traffic paths (بەراورد بەLAN91C92)
  • Integrated 10BASE-T network interface in one controller (بەراورد بەLAN91C94)
  • Software continuity across three related LAN91C families (بەراورد بەLAN91C96)
  • Closest ordering-family variant (بەراورد بەLAN91C93I-MS)

تێبینییەکانی دیزاین

Assign every one of the 100 TQFP pads from the manufacturer pin-description table before schematic capture. Keep clock, reset, local-bus, and Ethernet-related routing away from noisy switching nodes, and route the Ethernet interface according to the manufacturer reference layout. Preserve the selected 10BASE-T magnetics arrangement and keep copper and component placement consistent with the recommended isolation and network-side geometry.

Treat the LAN91C93I-ME as a mixed-signal interface device even though it operates at 10 Mb/s. Use a continuous ground reference under and around the device, minimize loop area on sensitive signals, and place support components close to their associated pins. Separate Ethernet-side magnetics and connector circuitry from sensitive analog or measurement sections where practical, and observe the manufacturer’s component-placement and keep-clear guidance.

Do not treat the 100% software-compatibility statement as a substitute for a complete hardware equivalence review. Verify pin mapping, supply rails, clock source, reset polarity, interrupt behavior, memory decode, and Ethernet transceiver connections for each proposed replacement. Also confirm that the operating-code suffix meets the production temperature, qualification, and purchasing requirements of the target system.

Validate host-bus timing and signal integrity at the maximum intended clock rate, with attention to loading, series termination, and the PCB routing topology specified by the manufacturer. Establish deterministic reset and clock sequencing before attempting link negotiation. During bring-up, verify local-bus transactions independently from Ethernet traffic so that host-side timing faults are not mistaken for PHY or network faults.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status must be confirmed from Microchip's current product declaration, material declaration, or ordering information for the exact LAN91C93I-ME configuration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LAN91C93I-ME datasheet LAN91C93I-ME pinout LAN91C93I-ME datasheet pdf LAN91C93I-ME equivalent LAN91C93I-ME replacement LAN91C93I-ME cross reference LAN91C93I-ME vs LAN91C92 LAN91C93I-ME TQFP-100 LAN91C93I-ME 10BASE-T Microchip LAN91C93I-ME LAN91C93I-ME local bus controller LAN91C93I-ME price LAN91C93I-ME stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology LAN91C93I-ME LAN91C93I LAN91C93I-MS LAN91C92 LAN91C94 LAN91C96 Ethernet controller network interface IC interface IC semiconductor 10BASE-T 10 Mb/s Ethernet full-duplex Ethernet switched Ethernet non-PCI controller local bus integrated PHY TQFP-100 TQFP package surface-mount package independent transmit and receive embedded networking industrial control
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ