LAN91C96I-MU - 10Mbps Ethernet Controller | Microchip
MPN: LAN91C96I-MU ✓ چالاکLAN91C96I-MU گشتی
An Ethernet controller is an interface IC that manages frame transmission, reception, addressing, and the connection between a host bus and physical network medium. The LAN91C96 belongs to the Ethernet controller hierarchy, where a MAC processes frames and an integrated PHY provides the physical-layer interface. Integrating the MAC, PHY, and packet memory reduces external component count while supporting a 10BASE-T network node.
Key features include full-duplex switched Ethernet support, independent transmit and receive operations, Magic Packet wake-up, and an enhanced transmit queue. The manufacturer identifies the LAN91C96i family as 100% pin- and software-compatible with the LAN91C92 and LAN91C94 when operating in Local Bus mode. This compatibility makes the LAN91C96I-MU especially relevant to legacy embedded-platform upgrades that must preserve an existing 100-pin TQFP footprint and Local Bus software model.
The controller integrates the MAC, physical layer, and packet RAM rather than requiring a separate network coprocessor, PHY, or external packet buffer. Its independent transmit and receive paths support simultaneous traffic handling, while the enhanced transmit queue helps organize frames awaiting transmission. Local Bus operation provides a direct path between the controller and compatible embedded processors without requiring the PCI bus protocol used by many later Ethernet controllers.
Typical uses include industrial embedded control systems, legacy instrument controllers, printer and terminal equipment, embedded network appliances, and legacy PCMCIA systems. The 10BASE-T interface is appropriate for established 10 Mbps twisted-pair networks where interoperability with installed infrastructure and software is more important than support for Fast Ethernet or Gigabit Ethernet.
Designers should confirm the processor voltage, Local Bus signals, transceiver connections, isolation requirements, and software-driver expectations before integration. The 100-pin TQFP footprint makes replacement mechanically straightforward, but pin and software compatibility do not eliminate the need to verify operating conditions, timing, termination, and application-specific network requirements.
This page combines the manufacturer's product information, interface characteristics, family compatibility, practical implementation guidance, drop-in alternatives, and application-specific engineering context. It is intended to help designers identify whether the LAN91C96I-MU satisfies the required Ethernet speed, bus architecture, package, voltage, and legacy-platform constraints.
جێگرەوەکانی جێگۆڕکێ بۆ LAN91C96I-MU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LAN91C96I-MU (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Supply Voltage, Host Interface, Operating Temperature, Package, Physical Layer.
LAN91C92
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LAN91C94
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LAN91C96-MS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN91C96-MU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN91C96I-MS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LAN91C96I-MU تایبەتمەندییەکان
| Device Type | Non-PCI single-chip full-duplex Ethernet controller |
| Ethernet Speed | 10 Mbps |
| Physical Layer | 10BASE-T twisted-pair interface |
| ڤۆڵتیەی دابینکردن | 3.3 V/5 V |
| Process Technology | CMOS |
| Host Interface | Local Bus, PCMCIA, and Motorola 68000 bus interfaces |
| Operating Mode | Full-duplex switched Ethernet |
| Transmit and Receive | Fully independent transmit and receive operations |
| Integrated Memory | Packet RAM |
| Wake-Up Feature | Magic Packet |
| Transmit Queue | Enhanced transmit queue |
| پلەی گەرمیی کارکردن | -40 C to +85 C |
| پاکێج | 100-pin TQFP |
| Package Body Size | 14 mm x 14 mm |
| ژمارەی پین | 100 pins |
| Packaging | Tray |
ڕێنمایی ڕێکخستنی پینی LAN91C96I-MU 14 mm x 14 mm
ڕێکخستنی پین بۆ LAN91C96I-MU (پاکێجی 14 mm x 14 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LAN91C96I-MU.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LAN91C96I-MU گونجاوە بۆ 6 بەکارھێنانs: Legacy Industrial Control Systems, Embedded Network Printers, Legacy PCMCIA Network Expansion, Test and Measurement Instruments, Industrial Network Appliances, Retrofit and Platform Maintenance.
Legacy Industrial Control Systems
LAN91C96I-MU fits legacy industrial controllers that retain a Motorola 68000 or compatible Local Bus processor but need native 10BASE-T connectivity. Its 10 Mbps Ethernet rate, 3.3 V/5 V operation, integrated MAC and PHY, and 100-pin TQFP package allow network capability to be added without replacing the host processor architecture. Independent transmit and receive paths are useful when the machine must exchange control, status, and diagnostic packets while maintaining deterministic local I/O behavior. Because this is a 10 Mbps controller, validate frame throughput against production traffic and confirm that the existing industrial network still uses 10BASE-T rather than assuming compatibility with Fast Ethernet infrastructure.
پێشنیارکراو
Embedded Network Printers
The LAN91C96I-MU can provide a dedicated 10BASE-T management and print-data interface in an embedded printer controller. Integrating the MAC, physical layer, and packet RAM reduces the need for a separate Ethernet interface device, while the 100-pin TQFP footprint is practical for established embedded board designs. Full-duplex operation and independent transmit and receive functions support simultaneous job traffic, status reporting, and network administration. The design must account for the lower throughput of 10 Mbps, provide suitable magnetics and isolation as required by the target network, and use the manufacturer application information to select the external 10BASE-T network components and connector arrangement.
پێشنیارکراو
Legacy PCMCIA Network Expansion
LAN91C96I-MU is applicable to embedded systems that expose a PCMCIA interface for expansion or where a PCMCIA-based Ethernet architecture is being retained. The controller combines a 10 Mbps 10BASE-T PHY, MAC, and packet RAM while offering host-interface options that include PCMCIA and Local Bus. This integration can simplify a legacy expansion-card design by removing separate MAC, PHY, and packet-buffer components. Engineering review should verify the PCMCIA electrical requirements, host timing, connector implementation, bus ownership, and software driver expectations. The controller should be used only where 10 Mbps Ethernet is intentional and the installed infrastructure supports 10BASE-T.
پێشنیارکراو
Test and Measurement Instruments
LAN91C96I-MU is suitable for legacy test and measurement instruments that need a deterministic Ethernet control link but do not require Fast Ethernet throughput. Its Local Bus interface can connect directly to a compatible embedded controller, while the integrated MAC, PHY, and packet RAM provide a consolidated network endpoint. The 3.3 V/5 V supply specification supports integration with mixed-voltage embedded systems, subject to individual rail verification. Designers should assess recovery behavior, packet latency, sustained throughput, and driver behavior under sustained command traffic. Magic Packet support can assist wake-up workflows where the instrument sleeps between test sequences and must resume operation upon receiving the designated network pattern.
پێشنیارکراو
Industrial Network Appliances
LAN91C96I-MU can serve as the 10BASE-T network interface in an industrial appliance designed around a Local Bus host processor. Its single-chip integration reduces board area associated with separate Ethernet MAC, PHY, and packet-memory devices, while the 100-pin TQFP package supports assembly on established controller boards. Full-duplex switched Ethernet and independent transmit and receive operation are valuable for appliances that exchange commands, logs, and status while continuing local control functions. Engineering teams should calculate worst-case traffic demand at 10 Mbps, implement the manufacturer's recommended external network interface components, and validate thermal performance over the specified -40 C to +85 C operating range.
پێشنیارکراو
Retrofit and Platform Maintenance
LAN91C96I-MU is particularly useful for maintaining or retrofitting equipment built around the LAN91C96i Local Bus ecosystem. The manufacturer documents the family as 100% pin- and software-compatible with the LAN91C92 and LAN91C94 in Local Bus mode, which can reduce board and firmware migration work during planned replacements. The 10 Mbps 10BASE-T interface continues to support established networks that have not migrated to Fast Ethernet. A drop-in decision still requires comparison of temperature limits, electrical timing, reset behavior, package suffix, and transceiver connections. This approach is best for controlled maintenance programs rather than new designs that require modern Ethernet performance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LAN91C96I-MU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LAN91C92 | LAN91C94 | LAN91C96 | LAN91C96-MU | LAN91C96I-MS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP | 100-pin TQFP - same package | 100-pin TQFP - same package | 100-pin TQFP - same package | 100-pin TQFP - same package | 100-pin TQFP - same package |
| Device Type | Non-PCI single-chip full-duplex Ethernet controller | Ethernet controller | Ethernet controller | VLSI Ethernet controller | Ethernet controller | Ethernet controller |
| Ethernet Speed | 10 Mbps | 10 Mbps | 10 Mbps | 10 Mbps | 10 Mbps | 10 Mbps |
| Physical Layer | 10BASE-T | 10BASE-T | 10BASE-T | 10BASE-T | 10BASE-T | 10BASE-T |
| Local Bus Compatibility | 100% pin- and software-compatible with LAN91C92 and LAN91C94 | Documented Local Bus counterpart | Documented Local Bus counterpart | LAN91C96i family base designation | LAN91C96 family configuration | LAN91C96i family configuration |
جیاکەرەوە سەرەکییەکان
- Full-duplex switched Ethernet support (بەراورد بەLAN91C92)
- Single-chip MAC, PHY, and packet-RAM integration (بەراورد بەLAN91C94)
- Independent transmit and receive operation (بەراورد بەLAN91C96)
- Legacy-platform footprint compatibility (بەراورد بەLAN91C96I-MS)
تێبینییەکانی دیزاین
Do not treat the LAN91C96i family compatibility statement as unconditional across every bus mode. The manufacturer specifically documents 100% pin and software compatibility with the LAN91C92 and LAN91C94 in Local Bus mode. Before substitution, verify the selected host interface, device address, interrupt behavior, timing, reset requirements, and driver configuration. A board using PCMCIA or Motorola 68000 signaling must also be checked against the relevant pin and timing tables.
Use the manufacturer's pin-description table and layout guidance to place the 100-pin TQFP controller, its clock circuitry, reset components, and external 10BASE-T interface components. Keep the Ethernet physical-layer path compact and follow the recommended separation and grounding scheme. Because this is a mixed-signal interface device, provide a stable supply reference, route clock and high-speed signals carefully, and avoid routing packet signals through areas susceptible to switching-node and magnetics-related interference.
The controller is specified for 3.3 V/5 V operation, but every connected component and every LAN91C96 suffix must be checked against the actual supply requirements. Provide local bypass capacitance at the supply pins and confirm the power-up and reset sequence with the manufacturer guidance. Do not assume that the 5 V-capable product description permits every internal rail to be operated at 5 V; validate the individual pin voltages and interface signal thresholds in the datasheet.
LAN91C96I-MU supports 10BASE-T at 10 Mbps, not Fast Ethernet or Gigabit Ethernet. Connecting it to infrastructure that negotiates at 100 Mbps or 1 Gbps may result in an unavailable link unless the network is deliberately configured for 10 Mbps. Confirm switch support, cable characteristics, external magnetics, isolation policy, and network management settings before release. Magic Packet operation should also be tested in the complete power-management workflow rather than in isolation.
زانیاری پابەندبوون
The manufacturer product page and datasheet snippets do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not stated and is not applicable as a general commercial Ethernet-controller designation.