LM2903MX/NOPB - Dual Open-Collector Comparator | Texas Instruments
MPN: LM2903MX/NOPB ✓ چالاکLM2903MX/NOPB گشتی
An analog comparator is a semiconductor that compares two input voltages and produces a logic-level indication of their relationship. The LM2903 belongs to the broader voltage comparator hierarchy, where each channel can evaluate a non-inverting input against an inverting input. Its open-collector outputs can sink output-stage current while leaving the output otherwise undriven in the high state, allowing a pull-up resistor to establish the logic-high voltage and support wired logic or level translation.
The LM2903 provides two independent comparators in one package. Its differential input arrangement is useful when a circuit must detect whether a measured voltage is above or below a reference threshold. The low-offset characteristic reduces the input-voltage difference required to change output state, which is valuable in sensing circuits where small signal changes must be resolved accurately. Open-collector outputs also provide flexibility when driving pull-up resistors to a supply selected by the system designer.
The rail-to-rail input characteristic expands the usable common-mode range of the comparator, while the low-power architecture suits battery-powered and general-purpose industrial designs. Because the two channels are independent, one package can implement two threshold detections, window-limit functions, or separate monitoring functions. Common implementations include overvoltage detection, undervoltage indication, temperature or sensor threshold switching, and simple control-loop decisions around a regulated supply.
Typical applications include industrial control boards, battery-powered instrumentation, sensor interfaces, power-supply supervision, and embedded systems requiring logic-compatible threshold decisions. The 8-pin SOIC package supports conventional surface-mount assembly and works well where moderate pin count and straightforward layout are priorities. It is also a familiar functional family for designs built around the LM2903, LM2903-N, and related dual-comparator platforms.
When designing the circuit, choose the external pull-up resistor to establish a valid logic-high voltage and check that the intended sink current remains within the output-device limits. Keep comparator inputs away from switching-node edges where practical, and evaluate input bias-current effects when the source impedance is high. The open-collector architecture avoids an active push-pull output but requires correct pull-up selection for dependable logic levels.
This product data combines the exact ordering information for LM2903MX/NOPB with practical guidance on pin use, logic interfacing, common-mode behavior, and drop-in alternatives. It also organizes the comparator’s electrical, environmental, package, and sourcing attributes for faster engineering selection and PCB planning.
جێگرەوەکانی جێگۆڕکێ بۆ LM2903MX/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2903MX/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Operating Temperature Range, Comparator Type, Channel Independence, Supply Current.
LM2903DR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903M/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903PSRG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903YDT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903MX
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903MX/NOPB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Comparator Type | Dual differential comparator |
| Number of Channels | 2 channels |
| Comparator Class | General-purpose comparator |
| جۆری دەرچوون | Open-collector |
| Input Common-Mode Range | Rail-to-rail |
| Offset Voltage | 2.0 mV maximum per comparator |
| مەودای پلەی گەرمیی کارکردن | -40°C to 85°C |
| پاکێج | 8-pin SOIC (D) |
| ژمارەی پینەکان | 8 pins |
| جۆری دامەزراندن | Surface mount |
ڕێکخستنی پینی LM2903MX/NOPB
| پین 1 | OUT 1 — Open-collector output for comparator channel 1 |
| پین 2 | IN 1- — Inverting input for comparator channel 1 |
| پین 3 | IN 1+ — Non-inverting input for comparator channel 1 |
| پین 4 | GND — Ground connection |
| پین 5 | IN 2+ — Non-inverting input for comparator channel 2 |
| پین 6 | IN 2- — Inverting input for comparator channel 2 |
| پین 7 | OUT 2 — Open-collector output for comparator channel 2 |
| پین 8 | VCC — Positive supply connection |
بەکارهێنانە باوەکان
LM2903MX/NOPB گونجاوە بۆ 6 بەکارھێنانs: Industrial Overvoltage Detection, Battery-Powered Sensor Thresholding, Power-Supply Supervision, Embedded System Limit Detection, Temperature and Analog Limit Monitoring, Open-Collector Logic Interfacing.
Industrial Overvoltage Detection
The LM2903MX/NOPB is suitable for detecting when a monitored rail crosses an upper threshold because each channel compares a divided input against a reference and changes the open-collector output state. Its low-offset capability can resolve threshold crossings as small as 2.0 mV maximum per comparator, while rail-to-rail input operation provides flexibility when the signal range approaches the supply limits. Place the device in the 8-pin SOIC footprint, add a resistor divider and reference source, and use a pull-up resistor on each output to establish a valid logic-high level.
پێشنیارکراو
Battery-Powered Sensor Thresholding
The LM2903MX/NOPB can convert a slowly changing sensor voltage into a binary threshold event using its two independent differential comparator channels. Its low-power, low-offset design is appropriate for portable measurement systems, and the rail-to-rail input characteristic helps when the sensor signal occupies much of the available supply range. Use both channels for two thresholds, or use one channel for a sensor decision and the other for a battery or supply condition. The open-collector outputs permit a pull-up voltage chosen for the host processor.
پێشنیارکراو
Power-Supply Supervision
The LM2903MX/NOPB can implement two independent supply-condition checks in a compact 8-pin SOIC circuit. One channel can compare a divided supply voltage with a reference, while the other can monitor another rail or generate an early power-good indication. Its low-offset characteristic supports precise threshold decisions, and the open-collector output allows wired supervision signals to be combined with suitable pull-up arrangements. Confirm input common-mode limits, supply range, and output sink-current requirements against the manufacturer datasheet for each operating condition.
پێشنیارکراو
Embedded System Limit Detection
The LM2903MX/NOPB fits embedded control boards that must identify upper and lower operating limits using two separate threshold detectors. Its differential inputs support comparisons against precision references, while the independent channels prevent one measurement from affecting the other. The 8-pin SOIC package provides a conventional surface-mount implementation and a straightforward footprint shared with other LM2903-family options. Use pull-up resistors on both open-collector outputs and route them to interrupt, fault, or enable inputs after confirming the logic polarity used by the controller.
پێشنیارکراو
Temperature and Analog Limit Monitoring
The LM2903MX/NOPB can monitor the output of an analog temperature-sensing front end and generate a threshold signal when the measurement crosses a defined boundary. A low-offset comparator reduces the voltage gap that must be resolved, which is useful when the sensed signal changes only a small amount around the trip point. The second channel can monitor another sensor, provide a complementary threshold, or supervise a reference. Because the outputs are open collector, the pull-up voltage and sink current can be matched to the system interface without changing the comparator package.
پێشنیارکراو
Open-Collector Logic Interfacing
The LM2903MX/NOPB can compare a variable signal with a logic reference and drive an open-collector node for wired-OR, wired-AND, or host-interface signaling. The pull-up resistor determines the high-state voltage, allowing the same output arrangement to work with different supply domains when the electrical ratings permit. Its dual-channel arrangement can combine two fault conditions into one indication. Maintain adequate pull-up strength for the required rise time, keep the output within its sink-current rating, and use the manufacturer pin descriptions when assigning PCB tracks.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM2903MX/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM2903DR | LM2903M/NOPB | LM2903PSRG4 | LM2903YDT | LM2903MX |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | ROHM Semiconductor |
| Package | SOIC-8 (D) | SOIC-8 (D), same footprint | SOIC-8 (D), same footprint | SOIC-8 (D), same footprint | SOIC-8 (D), same footprint | 8-pin SOP, same footprint |
| Comparator Type | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Output Type | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector |
جیاکەرەوە سەرەکییەکان
- Two independent threshold channels in a standard 8-pin SOIC (بەراورد بەLM2903PSRG4)
- Low-offset dual comparison (بەراورد بەLM2903M/NOPB)
- Cross-manufacturer sourcing option (بەراورد بەROHM Semiconductor LM2903MX)
تێبینییەکانی دیزاین
Place the pull-up resistor for each open-collector output close to the receiving logic or comparator output node, and keep the route short enough to minimize coupling from adjacent switching signals. Connect the comparator ground pin to the quiet analog ground reference used by the sensed source. Review the pin-description table in the manufacturer datasheet when assigning tracks because a swapped differential input reverses the decision polarity.
Select pull-up resistors using the required logic-high voltage, output sink-current limit, and allowable propagation delay. A larger pull-up resistance reduces supply current but slows the rising edge through input and board capacitance; a smaller value produces a faster edge but demands more sink current. Confirm the resistor’s power dissipation and ensure that the chosen supply and ground arrangement remain within the comparator’s electrical limits.
Do not treat an open-collector output as actively driven high. Every LM2903MX/NOPB output requires an appropriate pull-up resistor for normal logic-high operation. Also avoid assuming that the rail-to-rail input description removes all operating restrictions: verify supply voltage, common-mode limits, output-current limits, and temperature effects in the manufacturer datasheet before releasing the PCB design.
When the signal source has high impedance, account for input bias current and leakage paths because they can shift the comparator input voltage and create an offset from the intended threshold. Keep input traces short, use guarding where appropriate, and place the threshold network close to the device. For slow-changing inputs, check that the circuit avoids unintended oscillation caused by excessive noise near the decision point.
زانیاری پابەندبوون
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was present in the product information. Verify the current manufacturer declarations and material documentation for the exact ordering code.