Texas Instruments

LM2904DGKRG4 Dual 26V 700kHz Op Amp | Texas Instruments

MPN: LM2904DGKRG4 ✓ چالاک
26 V Vdss 20 nA Id 8-pin VSSOP Package Internal Speed
MOQ: 1 |

LM2904DGKRG4 گشتی

Texas Instruments LM2904DGKRG4 is a dual general-purpose operational amplifier with a 26 V maximum supply rating, 700 kHz gain-bandwidth product, and two push-pull output stages in an 8-pin VSSOP package. The device combines two independent amplifiers with internal frequency compensation, making it suitable for signal conditioning, buffering, and general analog-control applications.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The LM2904 family belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its dual-channel architecture provides two amplifiers in one package, reducing board area when a design requires two similar signal paths.

Each amplifier supports a 0.3 V/us slew rate, while the family's typical input offset voltage is 3 mV and typical input bias current is 20 nA. The typical supply current is 1 mA, making the LM2904 suitable for low-power instrumentation and embedded analog systems. Push-pull outputs support bidirectional output swings and improve drive capability compared with an open-collector output arrangement.

The LM2904 is internally frequency compensated and intended for general-purpose operation rather than high-speed signal processing. Its 700 kHz gain-bandwidth product is adequate for audio-frequency instrumentation, feedback-control loops, sensor interfaces, and low-bandwidth active filters. The 26 V supply rating provides additional input-voltage headroom in industrial systems while retaining a conventional low-power implementation.

Typical uses include buffering sensor outputs, amplifying low-level transducer signals, sampling circuits, active filtering, and general feedback-control loops. The dual configuration is particularly useful when a board needs matched signal conditioning for two channels or when a single package can provide two independent amplifier sections.

When designing the circuit, check input common-mode and differential voltage limits against the actual signal range. Keep feedback components close to the amplifier pins, provide stable bypassing at the supply connection, and verify output swing against the load and rail conditions. The VSSOP footprint also benefits from short, direct return paths to reduce parasitic feedback.

This page combines device specifications, application guidance, package information, and a parameter-by-parameter replacement comparison. It is intended to help engineers determine whether the LM2904DGKRG4 fits a circuit before releasing a board design or requesting production quotation.

جێگرەوەکانی جێگۆڕکێ بۆ LM2904DGKRG4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2904DGKRG4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Maximum Supply Voltage, Output Type, Package.

Texas Instruments
Maximum Supply Voltage: 36 V
Output Type: Open-collector
Package: 8-pin VSSOP (DGK)
بەراوردکردن لەگەڵ LM2904DGKRG4 →

LM2904DGK

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 8-pin VSSOP
Same LM2904 dual-amplifier electrical family and 8-pin VSSOP footprint; ordering attributes differ, while the published 700 kHz gain-bandwidth product, 0.3 V/us slew rate, and 26 V supply rating are equivalent.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM2904DGKRG4 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Amplifier Type General-purpose dual operational amplifier
Number of Circuits 2 circuits
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Slew Rate 0.3 V/us
جۆری دەرچوون Push-pull
Typical Input Offset Voltage 3 mV
Typical Input Bias Current 20 nA
Typical Supply Current 1 mA
پاکێج 8-pin VSSOP
جۆری دامەزراندن Surface mount
Frequency Compensation Internal

ڕێنمایی ڕێکخستنی پینی LM2904DGKRG4 8-pin vssop

ڕێکخستنی پین بۆ LM2904DGKRG4 (پاکێجی 8-pin vssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 8-pin vssop بۆ LM2904DGKRG4

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM2904DGKRG4.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LM2904DGKRG4 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Signal Conditioning, Audio and Instrumentation Buffering, Active Filter and Tone-Control Circuits, Feedback Control and Motor Support Circuits, Data Acquisition Front End, Power-Supply Monitoring and Threshold Circuits.

🏭

Industrial Sensor Signal Conditioning

The LM2904DGKRG4 fits industrial sensor-conditioning circuits that need two similar amplification channels without using separate single-amplifier packages. Its 700 kHz gain-bandwidth product and 0.3 V/us slew rate support low-bandwidth pressure, temperature, and position signals, while the dual architecture simplifies paired sensing or differential channel conditioning. The 26 V supply rating is useful above conventional 5 V rails, subject to the exact operating limits. Design each channel with input protection, bias compensation, and feedback values appropriate to the sensor source impedance, and verify the common-mode voltage stays within the amplifier's permitted range.

🎧

Audio and Instrumentation Buffering

The LM2904DGKRG4 can buffer audio-band and instrumentation signals when both channels operate below the device's 700 kHz gain-bandwidth limit. A 0.3 V/us slew rate preserves larger-amplitude waveforms more effectively than a slower general-purpose amplifier, while the push-pull output stage can drive the next stage more directly than an open-collector implementation. Use the part where low offset, bias current, and supply current are more important than wide-band precision. Keep feedback resistors close to the device and route the output return path away from sensitive input nodes to reduce parasitic feedback.

⚡

Active Filter and Tone-Control Circuits

The LM2904DGKRG4 is appropriate for first-order active filters, tone-control stages, and low-frequency feedback networks where a 700 kHz closed-loop bandwidth is adequate. Its dual configuration can implement two related filter sections or separate low-pass and high-pass channels without duplicating packages. The internal frequency compensation simplifies ordinary inverting and non-inverting designs. Component tolerances and the amplifier's typical 3 mV offset should be included in the error budget, and the output must remain within the usable swing established by the selected supply voltage and load.

🏭

Feedback Control and Motor Support Circuits

The LM2904DGKRG4 can serve as an error amplifier or drive-support stage in slow feedback-control loops, provided loop bandwidth remains well below 700 kHz. Two independent channels allow position and current feedback, or control and monitoring functions, to share one package. The 26 V maximum supply rating is useful for systems with a 12 V or 24 V rail, but the exact input and output limits must be respected. Avoid using the device where fast saturation recovery, low distortion under heavy load, or high-side drive voltage is required.

📡

Data Acquisition Front End

The LM2904DGKRG4 is suitable for the first amplification stage of a low-speed data-acquisition front end when two channels must be handled and the source impedances are moderate. Its typical 20 nA input bias current limits bias-current error in many sensor interfaces, while internal compensation avoids external stability networks. The 3 mV typical input offset must be evaluated against the smallest expected signal. Use guarded input traces, local bypass capacitors, and a defined analog-ground return path, and ensure input filtering does not create excessive phase shift around the selected closed-loop gain.

🖥️

Power-Supply Monitoring and Threshold Circuits

The LM2904DGKRG4 can compare a monitored rail or divided reference against a threshold in industrial monitoring equipment. Its dual channels support two independent comparisons, while the 26 V supply rating supports monitoring applications above a 5 V logic rail. The typical 3 mV offset translates into a threshold error that depends on the feedback-network gain, so the resistor ratio and reference accuracy must be included in the design. Keep high-voltage or fast-switching nodes away from the amplifier inputs and use suitable input protection.

What is the LM2904DGKRG4?
The LM2904DGKRG4 is a Texas Instruments dual general-purpose operational amplifier with two internally compensated channels, push-pull outputs, a 700 kHz gain-bandwidth product, and a 26 V maximum supply rating. According to the Texas Instruments LM2904 product page and manufacturer datasheet, it is packaged in an 8-pin VSSOP for surface-mount instrumentation, buffering, control, and signal-conditioning circuits.
What are the key specifications of LM2904DGKRG4 that engineers should know?
The LM2904DGKRG4 combines two general-purpose amplifiers, a 700 kHz gain-bandwidth product, a 0.3 V/us slew rate, and push-pull outputs in an 8-pin VSSOP. The manufacturer datasheet also identifies typical values of 3 mV input offset voltage, 20 nA input bias current, and 1 mA supply current. These characteristics position the device for low-bandwidth analog signal conditioning rather than high-speed or precision applications.
Where can I download the LM2904DGKRG4 datasheet PDF?
The authoritative starting point is the Texas Instruments LM2904 product page, which links to the LM2904 datasheet and ordering information for the LM2904DGKRG4 orderable. The device is a 26 V, 700 kHz dual operational amplifier in an 8-pin VSSOP. Engineers should use the manufacturer documentation for the complete electrical limits, pin descriptions, recommended operating conditions, and typical performance curves.
Where can I find the LM2904DGKRG4 pinout?
The LM2904DGKRG4 pin assignment is documented in the Texas Instruments LM2904 datasheet under the pin configuration and pin functions sections. The exact 8-pin VSSOP drawing should be used when assigning amplifier inputs, outputs, supply rails, and no-connect positions. Do not infer the VSSOP numbering from a SOIC package because the two footprints use different pin spacing and orientation.
Is LM2904DGKRG4 suitable for instrumentation and buffering?
The LM2904DGKRG4 is suitable for general instrumentation and buffering because it provides two internally compensated amplifiers, a 700 kHz gain-bandwidth product, and push-pull outputs. Its typical 3 mV input offset voltage and 20 nA input bias current are suitable for many sensor and feedback applications. For precision measurement, compare those input errors against the signal amplitude and required system accuracy.
Can LM2904DGKRG4 be used in a 12 V industrial control circuit?
The LM2904DGKRG4 can be suitable for a 12 V control circuit because its family has a 26 V maximum supply rating and a 1 mA typical supply current. Verify the exact orderable's operating and absolute maximum ratings in the manufacturer datasheet, especially input common-mode range, output swing, and temperature limits. The 26 V rating describes the maximum supply condition, not permission to exceed other operating limits.
What can replace the LM2904DGKRG4?
The closest documented same-footprint replacement is the Texas Instruments LM2904DGK because it uses the same 8-pin VSSOP family and LM2904 electrical architecture. The cross-reference listings identify broader LM2904 equivalents from several manufacturers, but they do not establish the exact VSSOP package, pin mapping, and qualification requirements needed for an unconditional drop-in claim. Validate the specific substitute against every electrical limit before substitution.
Is the LM2904DGKRG4 the same as LM2904DGKR?
The LM2904DGKRG4 and LM2904DGKR are both listed as Texas Instruments LM2904 devices in 8-pin VSSOP packages. Their orderable suffixes distinguish production, temperature, environmental, and packing configurations, so the suffix must be checked before concluding that one can replace the other without qualification. Compare the specific ordering table, temperature grade, reel or tray packing, and lifecycle status in the manufacturer documentation.
When should I choose LM2904DGKRG4 over LM2904DGK?
Choose LM2904DGKRG4 when its specific G4 ordering attributes match the production, environmental, or packaging requirements of the finished assembly. Choose LM2904DGK when that orderable provides the required electrical grade and logistics format at an acceptable availability and cost. Both belong to the same LM2904 dual-amplifier family, so the final choice should be based on the manufacturer ordering table rather than the generic device description.
Is LM2904DGKRG4 better than LM2904DGK for low-noise sensor interfaces?
The LM2904DGKRG4 and LM2904DGK share the same LM2904 amplifier family, so neither should be selected solely for lower noise unless a specific package or grade introduces a relevant difference. Evaluate input offset voltage, bias current, common-mode range, supply current, and the actual source impedance instead. For very small sensor signals, the sensor's noise, source impedance, and post-amplifier filtering may matter more than the orderable suffix.
Where can I buy LM2904DGKRG4 online?
Use the Request a Quote form on this page to request LM2904DGKRG4 pricing, stock confirmation, and a current lead-time quotation from XAIPART. The form allows the request to be evaluated against the exact LM2904DGKRG4 orderable rather than a related LM2904 package variant. Current availability and production commitments should be confirmed before the order is placed.
What is the price of LM2904DGKRG4?
Use the Request a Quote form on this page for the current LM2904DGKRG4 price. Quotations should identify the exact orderable, quantity, package configuration, delivery destination, and expected production volume. Pricing can change with quantity, supply position, and packaging requirements, so a price figure should be obtained for the proposed assembly rather than assumed from a generic listing.
What is the lead time and stock status of LM2904DGKRG4?
Request the current LM2904DGKRG4 stock position and lead time through the Request a Quote form on this page. The form should receive the required quantity, shipment destination, and whether multiple production releases are planned. A confirmed lead time should account for the exact orderable, authorized supply, and the quantity being reserved for the assembly.
Does the LM2904DGKRG4 need external frequency compensation?
No. The Texas Instruments LM2904 is an internally frequency-compensated dual operational amplifier, so the basic voltage-follower and inverting configurations do not require an added compensation network. The 700 kHz gain-bandwidth product and 0.3 V/us slew rate determine its dynamic response. External stability components may still be needed in specialized feedback arrangements or when driving unusual loads.
How should I compare LM2904DGKRG4 with a cross-brand LM2904 equivalent?
Compare the LM2904DGKRG4 with a cross-brand LM2904 equivalent by checking package dimensions, pin numbering, supply range, input common-mode range, differential input limits, output swing, offset voltage, bias current, supply current, noise, slew rate, and temperature qualification. Cross-reference information identifies functional counterparts, but it does not by itself prove pin-to-pin compatibility or AEC-Q100 qualification for every production condition.

داتای سەرچاوەی ئەندازیاری بۆ LM2904DGKRG4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose LM2904DGKRG4 when the design needs two general-purpose, internally compensated amplifiers with a 700 kHz gain-bandwidth product, 0.3 V/us slew rate, push-pull outputs, and operation from a supply rated up to 26 V. It is well suited to low-speed sensor interfaces, buffering, threshold comparisons, and modest feedback-control loops where the typical 3 mV offset and 20 nA bias current are acceptable. LM2904DGK is the closest same-brand drop-in alternative because it uses the same LM2904 family and 8-pin VSSOP footprint. The final orderable choice should follow the manufacturer's ordering table, including temperature grade, environmental attributes, and packing format. Cross-brand LM2904 counterparts should be considered only after confirming package dimensions, pin numbering, input limits, output swing, temperature range, and qualification for the intended application.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LM2904DGK
Package 8-pin VSSOP 8-pin VSSOP
Brand Texas Instruments Texas Instruments
Amplifier Configuration Dual general-purpose operational amplifier Dual general-purpose operational amplifier
Maximum Supply Voltage 26 V 26 V
Gain-Bandwidth Product 700 kHz 700 kHz
Slew Rate 0.3 V/us 0.3 V/us
Typical Input Offset Voltage 3 mV 3 mV
Typical Input Bias Current 20 nA 20 nA
Typical Supply Current 1 mA 1 mA
Output Type Push-pull Push-pull

جیاکەرەوە سەرەکییەکان

  • Identical core LM2904 electrical ratings (بەراورد بەLM2904DGK)
  • Dual-channel integration (بەراورد بەLM2904DGK)
  • Low typical supply demand (بەراورد بەLM2904DGK)

تێبینییەکانی دیزاین

Do not treat the 26 V maximum supply rating as a general-purpose input limit. Check the common-mode range, differential input range, and output swing in the Texas Instruments LM2904 datasheet before applying signals near either supply rail. The LM2904 is optimized for general-purpose operation and may require input attenuation when a sensor or feedback network can exceed those limits.

Place the bypass capacitor immediately across the supply pins and connect it to a low-impedance ground return. Keep each feedback resistor close to its associated amplifier pins, and avoid routing output traces directly beneath or parallel with input traces. These steps reduce parasitic feedback, especially in the 8-pin VSSOP where lead spacing and board area constrain component placement.

Estimated: with a 1 V peak output change, a 0.3 V/us slew rate requires approximately 3.33 us. Use this figure to assess whether large-signal settling is acceptable for the intended waveform and load. Confirm final settling with the closed-loop gain and output-load conditions because small-signal bandwidth alone does not determine large-signal behavior.

Estimated: at a 12 V supply and 1 mA typical supply current, the device's supply power is approximately 12 mW. The calculation excludes output-stage dissipation, external load current, and regulator losses. Because this is a general-purpose amplifier rather than a power output stage, calculate the dissipation separately for any load driven through its output pins.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status should be confirmed for the exact LM2904DGKRG4 orderable through the Texas Instruments product documentation or current material declaration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LM2904DGKRG4 datasheet LM2904DGKRG4 pinout LM2904DGKRG4 datasheet pdf LM2904DGKRG4 specifications LM2904DGKRG4 VSSOP-8 LM2904DGKRG4 equivalent LM2904DGKRG4 replacement LM2904DGKRG4 cross reference LM2904DGKRG4 vs LM2904DGK LM2904DGKRG4 price LM2904DGKRG4 stock Texas Instruments LM2904DGKRG4 LM2904DGKRG4 dual op amp LM2904DGKRG4 sensor interface

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments LM2904DGKRG4 LM2904DGK LM2904 dual operational amplifier general-purpose amplifier analog integrated circuit semiconductor push-pull output stage gain-bandwidth product slew rate input offset voltage input bias current supply current internal frequency compensation 8-pin VSSOP VSSOP package family surface-mount package SMD signal conditioning industrial instrumentation feedback control audio buffering sensor interface active filter
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ