NXP Semiconductors

LPC2105BBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP

MPN: LPC2105BBD48 ✓ چالاک
1.8 V or 3.3 V Vdss 48-pin LQFP (LFQFP) Package 60 MHz Speed 128 KB Memory
MOQ: 1 |

LPC2105BBD48 گشتی

The NXP Semiconductors LPC2105BBD48 is an ARM7TDMI-S 32-bit RISC microcontroller operating at 60 MHz, with 128 KB of embedded ISP/IAP flash memory and up to 32 KB of SRAM, packaged in a commercial-temperature 48-pin LQFP. It integrates core microcontroller functions, serial interfaces, timers, and GPIO resources into a compact surface-mount package suitable for embedded control, communications, and industrial equipment.

A microcontroller is a semiconductor that integrates a processor core, memory, peripheral controllers, and I/O into one device. The LPC2105 belongs to the NXP LPC2000 family of 16/32-bit ARM7 RISC microcontrollers. Its ARM7TDMI-S core provides deterministic embedded processing with real-time emulation and embedded trace support, while the ISP/IAP architecture supports in-system programming and application updates through the serial programming path.

The device provides 128 KB of high-speed embedded flash for firmware and 16 KB, 32 KB, or 64 KB RAM configurations across the related LPC2104, LPC2105, and LPC2106 family. Key connectivity identified for this part family includes I2C, UART, timer/counter, and GPIO functions. The LPC2105BBD48 is specified in a commercial temperature grade and uses a gull-wing LFQFP package with 48 terminals.

The ARM7TDMI-S architecture uses a 32-bit register set and an efficient instruction pipeline for control-oriented workloads. Its real-time emulation and embedded trace features help developers observe execution and debug firmware without changing the production hardware design. The integrated flash supports boot and field-update workflows, reducing external memory requirements in compact control systems.

Typical applications include industrial controllers, embedded communications equipment, data acquisition units, motor and actuator control, and compact consumer products. The 60 MHz operating speed provides useful performance margin for protocol handling and simultaneous peripheral activity, while the 48-pin package offers a practical balance between I/O availability and board area.

Designers should preserve the power, ground, and decoupling configuration described in the manufacturer datasheet and verify peripheral multiplexing before assigning pins. Firmware must also account for boot configuration, reset behavior, clock setup, and ISP/IAP handling. The LFQFP footprint requires adequate lead clearance and thermal consideration during soldering and assembly.

This product page consolidates package, memory, processor, and application details with a practical replacement guide. It also distinguishes true same-package drop-in options from parts that require firmware, board, or peripheral changes, helping engineers assess migration risk before committing to a redesign.

جێگرەوەکانی جێگۆڕکێ بۆ LPC2105BBD48 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LPC2105BBD48 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Architecture, Package Type, Product Type.

NXP Semiconductors
Architecture: 16/32-bit ARM
Package Type: LQFP-48
Product Type: Single-chip 32-bit microcontroller
بەراوردکردن لەگەڵ LPC2105BBD48 →

LPC2104BBD48

✅ جێگرەوەی ڕاستەوخۆ
NXP Semiconductors
📦 48-pin LQFP
ARM7TDMI-S · 16/32-bit RISC (ARM/Thumb) · 60 MHz · 128 kB · ISP/IAP Flash · 16 kB · 32 · LQFP-48 (SOT313-2)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LPC2106BBD48

✅ جێگرەوەی ڕاستەوخۆ
NXP Semiconductors
📦 48-pin LQFP
Single-chip 32-bit microcontroller · ARM7TDMI-S · 16/32-bit ARM · 60 MHz · 128 KB · 128 KB (128K × 8 bits) · 16 KB, 32 KB, or 64 KB · ISP/IAP programming

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LPC2105BBD48 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit RISC microcontroller
Processor Core ARM7TDMI-S
CPU Frequency 60 MHz
Embedded Flash Memory 128 KB
Programmable Memory Organization 128K x 8
RAM Options in Related Family 16 KB, 32 KB, or 64 KB
Program Memory Type ISP/IAP flash
ڤۆڵتیەی دابینکردن 1.8 V or 3.3 V
Architecture 16/32-bit ARM7 RISC
Debug and Trace Real-time emulation and embedded trace
Serial Interface I2C
Package Type 48-pin LQFP (LFQFP)
Package Body 7 mm x 7 mm
Terminal Form Gull wing
Number of Terminals 48
Temperature Grade Commercial
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی LPC2105BBD48 7 mm x 7 mm

ڕێکخستنی پین بۆ LPC2105BBD48 (پاکێجی 7 mm x 7 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 7 mm x 7 mm بۆ LPC2105BBD48

هیچ داتای وردی پینئاوت بەردەست نییە بۆ LPC2105BBD48.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

LPC2105BBD48 گونجاوە بۆ 6 بەکارھێنانs: Industrial Embedded Controller, Data Acquisition and Monitoring, Serial Communications Gateway, Motor and Actuator Control, Embedded Communications Equipment, Consumer Accessory Controller.

🏭

Industrial Embedded Controller

The LPC2105BBD48 fits compact industrial controllers because its 60 MHz ARM7TDMI-S core provides sufficient throughput for sequencing, supervisory logic, and multiple communication tasks, while 128 KB of ISP/IAP flash stores application firmware without an external memory device. The 48-pin LQFP provides dedicated MCU resources in a widely supported surface-mount format. A typical implementation uses the controller for state machines, digital I/O expansion, local operator interfaces, and fault logging. The commercial temperature grade must remain within the enclosure's specified environment, and field updates should use the ISP/IAP path rather than assuming removable flash.

🧩

Data Acquisition and Monitoring

The LPC2105BBD48 can act as the central processor in a data-acquisition or environmental-monitoring unit, combining a 60 MHz ARM7 core, 128 KB flash, and I2C connectivity in one package. The controller can sample sensors, timestamp records, format local data, and supervise an external communications module. Using I2C for compatible sensors reduces pin demand while leaving GPIO and timer resources available for alarm outputs or status indicators. The 32 KB RAM configuration requires careful buffer sizing, so streaming designs should avoid unnecessary copies and process data in bounded blocks.

🌐

Serial Communications Gateway

The LPC2105BBD48 supports compact protocol gateways where one embedded processor must coordinate serial traffic, framing, buffering, and control logic. Its 60 MHz ARM7TDMI-S core can service interrupt-driven UART and I2C activity, while 128 KB of ISP/IAP flash holds bootloader and gateway firmware. The 48-pin LQFP provides a practical balance of peripheral pins and board area for gateways placed beside an RS-232, Ethernet, or field-bus interface. Protocol timing and interrupt latency should be tested at the highest expected baud rate because replacing a microcontroller changes firmware execution characteristics even when the footprint is unchanged.

⚡

Motor and Actuator Control

The LPC2105BBD48 is appropriate for low- and medium-complexity actuator controllers that combine sequencing, safety interlocks, sensor monitoring, and communications. Its timer resources can generate precise timing references, while the 60 MHz core can supervise control loops and diagnose sensor faults. The 128 KB ISP/IAP flash supports field-updatable control firmware, and the commercial-temperature 48-pin LQFP is convenient for compact controller boards. Power transistors, motor drivers, protection networks, and filtering must be designed separately because the MCU does not directly provide the power stage or isolation required by industrial motors.

📡

Embedded Communications Equipment

The LPC2105BBD48 can serve as the supervisory controller in embedded networking equipment, handling boot control, status indicators, configuration storage, and auxiliary serial links. Its ARM7TDMI-S architecture and 60 MHz clock are appropriate for protocol management outside the main network transceiver function, while the integrated flash eliminates a separate firmware memory component for moderate code sizes. The 48-pin LQFP allows straightforward integration into a communications module with local Ethernet, serial, or industrial-network interfaces. Firmware should include watchdog recovery and verified boot handling so a power interruption cannot leave remote equipment inaccessible.

📱

Consumer Accessory Controller

The LPC2105BBD48 is suitable for compact consumer accessories that require a low-cost embedded control platform with local buttons, indicators, sensors, and serial communication. Its 128 KB flash accommodates application code and configuration logic, while the 60 MHz processor provides margin for responsive user-interface behavior and background protocol tasks. The 48-pin LQFP package can reduce board area compared with larger controller packages and supports automated surface-mount assembly. For battery-powered products, evaluate the operating current and active-mode duration under the intended duty cycle, and choose connector or transceiver components that match the product's voltage and ESD requirements.

What is the LPC2105BBD48?
The LPC2105BBD48 is an NXP Semiconductors 32-bit ARM7TDMI-S RISC microcontroller rated at 60 MHz, with 128 KB of ISP/IAP flash and a 48-pin LQFP package. According to the manufacturer datasheet listing, the device belongs to the LPC2104/LPC2105/LPC2106 family and supports real-time emulation and embedded trace for firmware development.
What are the key specifications of LPC2105BBD48?
The LPC2105BBD48 combines a 60 MHz ARM7TDMI-S core with 128 KB of embedded ISP/IAP flash in a commercial-temperature 48-pin LQFP. The family also provides 16 KB, 32 KB, or 64 KB RAM options, I2C connectivity, and real-time emulation with embedded trace. The part is specified for 1.8 V or 3.3 V operation.
Where can I download the LPC2105BBD48 datasheet PDF?
The LPC2105BBD48 datasheet is available through the linked 32-page PDF listing on AllDataSheet, which reproduces documentation for the LPC2104, LPC2105, and LPC2106 family. The document covers the ARM7TDMI-S core, flash and RAM organization, clocking, memory mapping, peripherals, package information, and electrical characteristics. Use the pin-description and electrical tables when assigning PCB functions.
Where can I find the LPC2105BBD48 pinout?
The LPC2105BBD48 pinout is found in the manufacturer datasheet under the LQFP48 pin-description and package drawings. Its package has 48 gull-wing terminals in a 7 mm by 7 mm LFQFP body. Review alternate-function, power, ground, reset, and programming pins directly in that table before finalizing a PCB because several peripheral functions can be multiplexed onto the same terminals.
What package does the LPC2105BBD48 use?
The LPC2105BBD48 uses a 48-pin LQFP, also identified as LFQFP or SOT313-2, with a 7 mm by 7 mm body and gull-wing leads. Its 48 terminals distinguish it from related 32-pin and 64-pin LPC devices in the same general family. Confirm the manufacturer package drawing and land pattern against the exact ordering code before fabrication.
How much flash and RAM does LPC2105BBD48 have?
The LPC2105BBD48 has 128 KB of embedded ISP/IAP flash organized as 128K x 8. The LPC2104/LPC2105/LPC2106 family is described with 16 KB, 32 KB, or 64 KB RAM options, although the exact RAM configuration associated with every ordering suffix must be checked in the order-information table. The 128 KB flash is intended primarily for firmware storage.
Is LPC2105BBD48 suitable for industrial control applications?
Yes, the LPC2105BBD48 is suitable for many industrial-control designs because it combines a 60 MHz ARM7TDMI-S processor, 128 KB flash, integrated peripherals, and a compact 48-pin LQFP package. The device carries a commercial temperature grade. For installations with severe temperature exposure, vibration, extended supply requirements, or functional-safety obligations, verify whether a more specialized grade is required.
What is the difference between LPC2104BBD48 and LPC2105BBD48?
Both devices are associated with the same 48-pin LQFP controller family and share the 60 MHz ARM7TDMI-S architecture and 128 KB ISP/IAP flash. Their primary family distinction is RAM capacity, with the LPC2104 associated with 16 KB RAM and the LPC2105 with 32 KB RAM. Confirm every peripheral, timing, and electrical detail in the manufacturer order-information table before treating either part as a direct substitution.
When should I choose LPC2105BBD48 over LPC2106BBD48?
Choose LPC2105BBD48 when 32 KB of RAM is sufficient and a 48-pin LQFP is required; choose LPC2106BBD48 when the additional family RAM option is useful for buffering, protocol handling, or other memory-intensive firmware. The two parts share the 128 KB flash and 60 MHz ARM7TDMI-S platform, but board population, firmware, and operating-condition assumptions must be reviewed before substitution.
What can replace LPC2105BBD48?
LPC2104BBD48 and LPC2106BBD48 are the closest same-package family alternatives, but neither is an unconditional substitute because their RAM capacities differ from the 32 KB LPC2105 configuration. No cross-manufacturer drop-in replacement was identified. Any migration should verify pin multiplexing, startup, clocking, memory size, peripheral availability, voltage levels, firmware timing, and production qualification.
Is there an NXP drop-in replacement for LPC2105BBD48?
The closest identified NXP options are LPC2104BBD48 and LPC2106BBD48 in the same 48-pin LQFP footprint. The LPC2104 has a smaller RAM configuration, while the LPC2106 offers a larger family RAM configuration, so each requires firmware and memory-budget review. A strict drop-in replacement must preserve the intended 32 KB RAM and all application-critical peripherals.
LPC2105BBD48 vs LPC2106BBD48: which is better for communications?
The LPC2106BBD48 is generally preferable when communications buffers or protocol stacks require more than the LPC2105BBD48's 32 KB RAM. Both use a 60 MHz ARM7TDMI-S core, 128 KB ISP/IAP flash, and a 48-pin LQFP family package. The larger RAM option can reduce external-memory pressure, but final selection still depends on the specific peripheral set and validated firmware.
Where can I buy LPC2105BBD48 online?
The LPC2105BBD48 can be requested through the Request a Quote form on this page for current availability, order quantities, and lead time. The product is a catalog microcontroller with 128 KB flash and a 48-pin LQFP package, and distributor listings include both standard-order and legacy-ordering variants. Confirm the exact suffix and packing method when requesting a quote.
What is the lead time for LPC2105BBD48?
The current lead time for LPC2105BBD48 should be confirmed through the Request a Quote form on this page. Lead time can vary with the exact ordering suffix, packing method, production status, and required quantity. Use the manufacturer datasheet for lifecycle and ordering information, and request a written quotation before committing a build schedule around a specific inventory allocation.
Is LPC2105BBD48 in stock?
Current LPC2105BBD48 stock status must be checked through the Request a Quote form on this page. Listings show both LPC2105BBD48 and LPC2105BBD48,151 order forms, but an online product page does not by itself guarantee warehouse availability. Specify the exact MPN, packing option, and required quantity when requesting a quotation.

داتای سەرچاوەی ئەندازیاری بۆ LPC2105BBD48 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose LPC2105BBD48 when an existing ARM7TDMI-S design needs 60 MHz processing, 128 KB ISP/IAP flash, 32 KB RAM, and a 48-pin LQFP footprint. It is especially suitable for industrial controls, acquisition systems, and embedded communications modules that already target the LPC2104/LPC2105/LPC2106 hardware platform. LPC2104BBD48 is appropriate only when the firmware fits within 16 KB RAM; its footprint matches, but the 50% RAM reduction can require linker, stack, and buffer changes. LPC2106BBD48 is useful when the application benefits from 64 KB RAM, although it doubles the RAM capacity and still requires firmware and peripheral verification. No cross-manufacturer drop-in option was established, so changing CPU architecture is a redesign rather than a substitution. Before any migration, verify pin multiplexing, startup, clock, interrupt mapping, peripherals, voltage, thermal conditions, and programming procedures.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LPC2104BBD48 LPC2106BBD48
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-pin LQFP 48-pin LQFP 48-pin LQFP
Processor Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
CPU Frequency 60 MHz 60 MHz 60 MHz
Embedded Flash 128 KB 128 KB 128 KB
RAM 32 KB 16 KB 64 KB
Program Memory ISP/IAP flash ISP/IAP flash ISP/IAP flash
Supply Voltage 1.8 V or 3.3 V 1.8 V or 3.3 V 1.8 V or 3.3 V
Debug and Trace Real-time emulation and embedded trace Real-time emulation and embedded trace Real-time emulation and embedded trace
Temperature Grade Commercial Commercial Commercial

جیاکەرەوە سەرەکییەکان

  • Balanced 32 KB RAM configuration (بەراورد بەLPC2104BBD48)
  • Lower RAM demand than the larger family member (بەراورد بەLPC2106BBD48)
  • Compact 48-pin integration (بەراورد بەLPC2104BBD48)

تێبینییەکانی دیزاین

Assign the PCB footprint from the exact 48-pin LQFP drawing rather than relying only on the generic LFQFP name. Preserve the manufacturer-recommended decoupling and power-entry geometry, route analog and digital returns deliberately, and keep high-current switching nodes away from sensitive crystal, reset, and communication traces. Confirm courtyard, solder mask, paste, and exposed thermal requirements against the package drawing before releasing the layout.

Use the manufacturer datasheet's exact pin names and voltage domains to separate core, I/O, and analog supply connections. Do not assume that every 3.3 V-labelled rail is interchangeable with the internal 1.8 V core domain. Check the startup current, I2C pull-up voltage, peripheral operating voltage, and external transceiver levels to prevent an overvoltage condition during board bring-up.

The LPC2104 and LPC2106 share the same broad package family and processor platform but differ in RAM capacity from the LPC2105. Before substituting either device, audit linker memory assumptions, stack depth, DMA or peripheral buffers, boot code, and timing. Preserve the correct ISP/IAP boot sequence and verify reset, crystal startup, and watchdog behavior on the assembled board.

Follow the datasheet guidance for crystal and reset-loop placement because long or noisy clock traces can reduce startup reliability. Keep the oscillator loop compact, provide a clean ground reference beneath the crystal area, and avoid routing high-speed or switching signals through the oscillator region. If the design relies on internal flash updates, test programming and recovery behavior with the intended connector and voltage levels.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available product information identifies a commercial-temperature microcontroller but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose commercial MCU.

داتا پشتڕاستکراوەتەوە لە: 2026-11-20 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

LPC2105BBD48 datasheet LPC2105BBD48 pinout LPC2105BBD48 datasheet pdf LPC2105BBD48 equivalent LPC2105BBD48 replacement LPC2105BBD48 footprint LPC2105BBD48 price LPC2105BBD48 stock LPC2105BBD48 vs LPC2106BBD48 LPC2105BBD48 vs LPC2104BBD48 NXP LPC2105BBD48 LPC2105BBD48 60MHz 128KB LPC2105BBD48 LQFP48 LPC2105BBD48 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

NXP Semiconductors LPC2105BBD48 LPC2104BBD48 LPC2106BBD48 LPC2104/LPC2105/LPC2106 ARM7TDMI-S 32-bit RISC microcontroller embedded microcontroller semiconductor ISP IAP 128 KB flash memory 32 KB SRAM 60 MHz 1.8 V 3.3 V LQFP48 LFQFP SOT313-2 gull-wing package surface mount I2C UART real-time emulation embedded trace industrial control data acquisition embedded communications
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ