LPC2105BBD48 - 60MHz ARM7 MCU, 128KB Flash | NXP
MPN: LPC2105BBD48 ✓ 啟用中LPC2105BBD48 概覽
A microcontroller is a semiconductor that integrates a processor core, memory, peripheral controllers, and I/O into one device. The LPC2105 belongs to the NXP LPC2000 family of 16/32-bit ARM7 RISC microcontrollers. Its ARM7TDMI-S core provides deterministic embedded processing with real-time emulation and embedded trace support, while the ISP/IAP architecture supports in-system programming and application updates through the serial programming path.
The device provides 128 KB of high-speed embedded flash for firmware and 16 KB, 32 KB, or 64 KB RAM configurations across the related LPC2104, LPC2105, and LPC2106 family. Key connectivity identified for this part family includes I2C, UART, timer/counter, and GPIO functions. The LPC2105BBD48 is specified in a commercial temperature grade and uses a gull-wing LFQFP package with 48 terminals.
The ARM7TDMI-S architecture uses a 32-bit register set and an efficient instruction pipeline for control-oriented workloads. Its real-time emulation and embedded trace features help developers observe execution and debug firmware without changing the production hardware design. The integrated flash supports boot and field-update workflows, reducing external memory requirements in compact control systems.
Typical applications include industrial controllers, embedded communications equipment, data acquisition units, motor and actuator control, and compact consumer products. The 60 MHz operating speed provides useful performance margin for protocol handling and simultaneous peripheral activity, while the 48-pin package offers a practical balance between I/O availability and board area.
Designers should preserve the power, ground, and decoupling configuration described in the manufacturer datasheet and verify peripheral multiplexing before assigning pins. Firmware must also account for boot configuration, reset behavior, clock setup, and ISP/IAP handling. The LFQFP footprint requires adequate lead clearance and thermal consideration during soldering and assembly.
This product page consolidates package, memory, processor, and application details with a practical replacement guide. It also distinguishes true same-package drop-in options from parts that require firmware, board, or peripheral changes, helping engineers assess migration risk before committing to a redesign.
直接替換替代品,適用於 LPC2105BBD48 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LPC2105BBD48 (相同外形與佔位) — 差異在於 Architecture, Package Type, Product Type.
LPC2104BBD48
✅ 直接替換聯絡詢價
查看資料表 →LPC2106BBD48
✅ 直接替換聯絡詢價
查看資料表 →LPC2105BBD48 最大額定值與電氣特性
| Product Type | 32-bit RISC microcontroller |
| Processor Core | ARM7TDMI-S |
| CPU Frequency | 60 MHz |
| Embedded Flash Memory | 128 KB |
| Programmable Memory Organization | 128K x 8 |
| RAM Options in Related Family | 16 KB, 32 KB, or 64 KB |
| Program Memory Type | ISP/IAP flash |
| 供應電壓 | 1.8 V or 3.3 V |
| Architecture | 16/32-bit ARM7 RISC |
| Debug and Trace | Real-time emulation and embedded trace |
| Serial Interface | I2C |
| Package Type | 48-pin LQFP (LFQFP) |
| Package Body | 7 mm x 7 mm |
| Terminal Form | Gull wing |
| Number of Terminals | 48 |
| Temperature Grade | Commercial |
| 安裝類型 | Surface mount |
LPC2105BBD48 7 mm x 7 mm 腳位配置指南
LPC2105BBD48(7 mm x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LPC2105BBD48.
請參閱 資料表 以查看完整腳位配置。
典型應用
LPC2105BBD48 適用於 6 應用s: Industrial Embedded Controller, Data Acquisition and Monitoring, Serial Communications Gateway, Motor and Actuator Control, Embedded Communications Equipment, Consumer Accessory Controller.
Industrial Embedded Controller
The LPC2105BBD48 fits compact industrial controllers because its 60 MHz ARM7TDMI-S core provides sufficient throughput for sequencing, supervisory logic, and multiple communication tasks, while 128 KB of ISP/IAP flash stores application firmware without an external memory device. The 48-pin LQFP provides dedicated MCU resources in a widely supported surface-mount format. A typical implementation uses the controller for state machines, digital I/O expansion, local operator interfaces, and fault logging. The commercial temperature grade must remain within the enclosure's specified environment, and field updates should use the ISP/IAP path rather than assuming removable flash.
推薦
Data Acquisition and Monitoring
The LPC2105BBD48 can act as the central processor in a data-acquisition or environmental-monitoring unit, combining a 60 MHz ARM7 core, 128 KB flash, and I2C connectivity in one package. The controller can sample sensors, timestamp records, format local data, and supervise an external communications module. Using I2C for compatible sensors reduces pin demand while leaving GPIO and timer resources available for alarm outputs or status indicators. The 32 KB RAM configuration requires careful buffer sizing, so streaming designs should avoid unnecessary copies and process data in bounded blocks.
推薦
Serial Communications Gateway
The LPC2105BBD48 supports compact protocol gateways where one embedded processor must coordinate serial traffic, framing, buffering, and control logic. Its 60 MHz ARM7TDMI-S core can service interrupt-driven UART and I2C activity, while 128 KB of ISP/IAP flash holds bootloader and gateway firmware. The 48-pin LQFP provides a practical balance of peripheral pins and board area for gateways placed beside an RS-232, Ethernet, or field-bus interface. Protocol timing and interrupt latency should be tested at the highest expected baud rate because replacing a microcontroller changes firmware execution characteristics even when the footprint is unchanged.
推薦
Motor and Actuator Control
The LPC2105BBD48 is appropriate for low- and medium-complexity actuator controllers that combine sequencing, safety interlocks, sensor monitoring, and communications. Its timer resources can generate precise timing references, while the 60 MHz core can supervise control loops and diagnose sensor faults. The 128 KB ISP/IAP flash supports field-updatable control firmware, and the commercial-temperature 48-pin LQFP is convenient for compact controller boards. Power transistors, motor drivers, protection networks, and filtering must be designed separately because the MCU does not directly provide the power stage or isolation required by industrial motors.
推薦
Embedded Communications Equipment
The LPC2105BBD48 can serve as the supervisory controller in embedded networking equipment, handling boot control, status indicators, configuration storage, and auxiliary serial links. Its ARM7TDMI-S architecture and 60 MHz clock are appropriate for protocol management outside the main network transceiver function, while the integrated flash eliminates a separate firmware memory component for moderate code sizes. The 48-pin LQFP allows straightforward integration into a communications module with local Ethernet, serial, or industrial-network interfaces. Firmware should include watchdog recovery and verified boot handling so a power interruption cannot leave remote equipment inaccessible.
推薦
Consumer Accessory Controller
The LPC2105BBD48 is suitable for compact consumer accessories that require a low-cost embedded control platform with local buttons, indicators, sensors, and serial communication. Its 128 KB flash accommodates application code and configuration logic, while the 60 MHz processor provides margin for responsive user-interface behavior and background protocol tasks. The 48-pin LQFP package can reduce board area compared with larger controller packages and supports automated surface-mount assembly. For battery-powered products, evaluate the operating current and active-mode duration under the intended duty cycle, and choose connector or transceiver components that match the product's voltage and ESD requirements.
推薦
推薦產品摘要
工程參考資料,適用於 LPC2105BBD48 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LPC2104BBD48 | LPC2106BBD48 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-pin LQFP | 48-pin LQFP | 48-pin LQFP |
| Processor Core | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S |
| CPU Frequency | 60 MHz | 60 MHz | 60 MHz |
| Embedded Flash | 128 KB | 128 KB | 128 KB |
| RAM | 32 KB | 16 KB | 64 KB |
| Program Memory | ISP/IAP flash | ISP/IAP flash | ISP/IAP flash |
| Supply Voltage | 1.8 V or 3.3 V | 1.8 V or 3.3 V | 1.8 V or 3.3 V |
| Debug and Trace | Real-time emulation and embedded trace | Real-time emulation and embedded trace | Real-time emulation and embedded trace |
| Temperature Grade | Commercial | Commercial | Commercial |
主要差異化特點
- Balanced 32 KB RAM configuration (對比LPC2104BBD48)
- Lower RAM demand than the larger family member (對比LPC2106BBD48)
- Compact 48-pin integration (對比LPC2104BBD48)
設計說明
Assign the PCB footprint from the exact 48-pin LQFP drawing rather than relying only on the generic LFQFP name. Preserve the manufacturer-recommended decoupling and power-entry geometry, route analog and digital returns deliberately, and keep high-current switching nodes away from sensitive crystal, reset, and communication traces. Confirm courtyard, solder mask, paste, and exposed thermal requirements against the package drawing before releasing the layout.
Use the manufacturer datasheet's exact pin names and voltage domains to separate core, I/O, and analog supply connections. Do not assume that every 3.3 V-labelled rail is interchangeable with the internal 1.8 V core domain. Check the startup current, I2C pull-up voltage, peripheral operating voltage, and external transceiver levels to prevent an overvoltage condition during board bring-up.
The LPC2104 and LPC2106 share the same broad package family and processor platform but differ in RAM capacity from the LPC2105. Before substituting either device, audit linker memory assumptions, stack depth, DMA or peripheral buffers, boot code, and timing. Preserve the correct ISP/IAP boot sequence and verify reset, crystal startup, and watchdog behavior on the assembled board.
Follow the datasheet guidance for crystal and reset-loop placement because long or noisy clock traces can reduce startup reliability. Keep the oscillator loop compact, provide a clean ground reference beneath the crystal area, and avoid routing high-speed or switching signals through the oscillator region. If the design relies on internal flash updates, test programming and recovery behavior with the intended connector and voltage levels.
合規資訊
The available product information identifies a commercial-temperature microcontroller but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose commercial MCU.