Maxim Integrated

MAX113EAG+ - 8-Bit 4-Channel 400ksps ADC | Analog Devices

MPN: MAX113EAG+ ✓ چالاک
+3V Vdss 1µA Id 24-pin SSOP Package
MOQ: 1 |

MAX113EAG+ گشتی

Maxim Integrated MAX113EAG+ is an 8-bit, 4-channel, 400ksps flash analog-to-digital converter operating from a single +3V supply in a 24-pin SSOP package. It combines a 1.8µs conversion time, microprocessor-compatible interfacing, and a 1µA power-down mode for compact low-power measurement systems.

An ADC is a data-conversion IC that converts an analog voltage into a digital code for processing, measurement, or control. The MAX113EAG+ belongs to the flash-converter ADC hierarchy, combining a 4-bit flash stage with a 4-bit successive-approximation stage to achieve 8-bit resolution. This architecture supports sampling-based acquisition in industrial control, sensor conditioning, panel interfaces, and embedded instrumentation.

The principal operating characteristics are 8-bit resolution, 4 analog input channels, a 400ksps conversion rate, and operation from a single +3V supply. The 24-SSOP package is intended for surface-mount assembly. A 1.8µs conversion time supports rapid acquisition, while the 1µA power-down current reduces standby consumption in intermittently operating equipment.

The converter is designed for microprocessor-compatible systems, allowing acquisition results to be transferred through a digital bus and then processed by a microcontroller or logic controller. Its flash conversion method avoids the longer conversion sequence associated with successive-approximation-only ADC architectures. Supply-noise sensitivity, input-source impedance, acquisition timing, and output-code accuracy must still be evaluated against the circuit requirements.

Typical uses include four-channel sensor acquisition, industrial process monitoring, digital panel meters, battery-operated instruments, and embedded control systems. The four-channel architecture reduces the number of separate converters required when several slow or moderate-speed analog signals must be digitized, while the 400ksps rate allows successive readings to be captured rapidly.

The principal design consideration is preserving signal integrity from each sensor to the analog inputs. Use short traces, suitable input filtering, and an analog ground strategy consistent with the manufacturer datasheet. Because the device operates from +3V, confirm that every input remains within its specified analog input range before applying externally generated voltages.

This product page combines the device specifications, application guidance, pin-compatible alternatives, and design notes needed to qualify the MAX113EAG+ for a new PCB. It also provides a structured path for comparing the converter with other same-package ADC options before final schematic approval.

جێگرەوەکانی جێگۆڕکێ بۆ MAX113EAG+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX113EAG+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Supply Voltage, Conversion Time, Input Type, Package, Power-Down Current.

Analog Devices
Supply Voltage: +3 V (single)
Conversion Time: 1.8 us
Input Type: Single-ended
بەراوردکردن لەگەڵ MAX113EAG+ →
Maxim Integrated
Supply Voltage: +3 V single supply
Conversion Time: 1.8 us
Input Type: Single-ended
بەراوردکردن لەگەڵ MAX113EAG+ →

MAX113CAG+TG068

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 24-pin SSOP
8 bit · 4 · Half-flash · 400 ksps · 1.8 us · +3 V (single) · 1 uA · Single-ended

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX117CAG+

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 24-pin SSOP
Same MAX113/MAX117 8-bit, 400ksps, 24-pin SSOP family and 1µA power-down class, but channel configuration differs from the four-channel MAX113EAG+

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX117EAG+

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 24-pin SSOP
Same MAX113/MAX117 family performance class and 24-pin SSOP footprint, with an eight-channel option versus four channels on the MAX113EAG+

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX113EAG+ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

ADC Resolution 8 bit
Number of Analog Input Channels 4 channels
Maximum Conversion Rate 400ksps
Conversion Time 1.8µs
ڤۆڵتیەی دابینکردن +3V
Power-Down Current 1µA
Conversion Architecture Half-flash, 1 flash conversion
Digital Interface Microprocessor-compatible
پاکێج 24-pin SSOP
جۆری دامەزراندن Surface mount
Input Type 4 single-ended analog inputs

ڕێنمایی ڕێکخستنی پینی MAX113EAG+ 24-pin ssop

ڕێکخستنی پین بۆ MAX113EAG+ (پاکێجی 24-pin ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 24-pin ssop بۆ MAX113EAG+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX113EAG+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX113EAG+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Acquisition, Digital Panel Meter, Battery-Powered Instrument, Embedded Control System, Process Monitoring, Portable Data Logger.

🏭

Industrial Sensor Acquisition

The MAX113EAG+ fits four-channel industrial sensor acquisition because it combines 8-bit resolution with a 400ksps conversion rate and 1.8µs conversion time. Its single +3V operation simplifies low-voltage instrumentation, while the microprocessor-compatible interface allows the controller to retrieve successive measurements. Use the device when sensor outputs fall within the specified analog range and the application requires compact conversion rather than high-resolution mixed-signal performance. The four inputs can reduce the number of separate converters in a panel, but input filtering and grounding should prevent sensor and digital noise from limiting measurement repeatability.

📺

Digital Panel Meter

The MAX113EAG+ is appropriate for a digital panel meter that must capture several analog channels at modest resolution. Four inputs support sensor or setpoint monitoring without requiring four separate converter packages, and the 400ksps rate supports rapid sequential sampling. Its 24-pin SSOP package is suitable for compact surface-mount instrument designs. The 1µA power-down current is valuable when the meter operates intermittently, although panel noise, display excitation, and ground-return paths still require careful layout to prevent meter readings from becoming unstable.

⚡

Battery-Powered Instrument

The MAX113EAG+ supports battery-powered instruments because it operates from +3V and provides a 1µA power-down mode for periods between measurements. Its 400ksps conversion rate allows multiple readings to be captured from four inputs during a short active window, helping the instrument obtain useful data before returning to a low-power state. The 8-bit resolution is suitable for threshold, trend, and basic process measurements where finer quantization is unnecessary. Battery life calculations should include the active conversion current, digital interface activity, and any external display or sensor loads.

🔧

Embedded Control System

The MAX113EAG+ can serve as the acquisition front end in an embedded control system requiring several analog measurements and a straightforward processor interface. Its microprocessor-compatible digital interface supports integration with control logic, while 400ksps throughput provides adequate speed for many feedback, monitoring, and setpoint tasks. The single +3V supply is useful in compact embedded equipment. Select it when 8-bit measurement resolution is sufficient and validate acquisition timing against the controller's bus activity. For higher precision or wider dynamic range, a different converter class would be more appropriate.

📊

Process Monitoring

The MAX113EAG+ suits process-monitoring equipment that tracks multiple slowly changing analog quantities such as temperature, pressure, or position. Four channels can represent several sensing elements, and the 1.8µs conversion time permits closely spaced readings for trend analysis. The 8-bit output is appropriate for coarse process indication, alarm thresholds, and basic closed-loop adjustment. Use input dividers or transducers appropriate to each signal, keep the acquisition front end away from high-current switching paths, and account for source impedance and acquisition timing in the analog network.

📱

Portable Data Logger

The MAX113EAG+ fits a portable data logger that records four low-bandwidth analog channels while minimizing standby consumption. The converter's 400ksps rate provides more sampling capability than typical slow sensor outputs require, while its 1µA power-down mode can reduce current during inactive logging intervals. An 8-bit result is suitable for basic environmental or equipment-condition records and can reduce storage and processing requirements. The enclosure should be designed to prevent connector transients, moisture, and switching supplies from introducing errors greater than the selected measurement resolution.

کورتەی بەرهەمە پێشنیارکراوەکان

What is the operating voltage of MAX113EAG+?
The MAX113EAG+ operates from a single +3V supply. According to the Maxim Integrated datasheet, this low-voltage architecture places the converter in the ADC > data-conversion IC > integrated-circuit category and supports 8-bit, 4-channel acquisition with a 400ksps maximum conversion rate. Confirm the exact supply operating range, input limits, and decoupling requirements against the manufacturer datasheet before finalizing the power rails and analog front end.
What are the key specifications of MAX113EAG+ that engineers should know?
The MAX113EAG+ combines 8-bit resolution, four analog input channels, a 400ksps conversion rate, a 1.8µs conversion time, and operation from a single +3V supply. It uses a half-flash conversion architecture and provides a 1µA power-down mode in a 24-pin SSOP package. According to the Maxim Integrated datasheet, the microprocessor-compatible interface makes the device suitable for embedded controllers, data-acquisition modules, and sensor-monitoring equipment.
Where can I download the MAX113EAG+ datasheet PDF?
The MAX113EAG+ datasheet can be opened through the Maxim Integrated datasheet link listed on this page. The manufacturer document describes the 8-bit, four-channel, 400ksps converter, its half-flash architecture, electrical characteristics, pin descriptions, and application information. Use that document to confirm the exact analog input range, reference arrangement, timing values, and package drawing before releasing a PCB layout.
Where can I find the MAX113EAG+ pinout?
The MAX113EAG+ pinout is published in the manufacturer datasheet, and this page identifies the physical package as a 24-pin SSOP. Use the pin-description table and package drawing to assign power, ground, analog inputs, control signals, and digital outputs. The complete numbered pin list is not reproduced here because a verified pin table was not included in the technical listing.
What can replace the MAX113EAG+?
The MAX113CAG+ is the clearest same-package replacement candidate identified for the MAX113EAG+. Both are 24-pin SSOP devices in the MAX113 family, and cross-reference information describes the MAX113CAG+ as an 8-bit, four-channel, 400ksps converter with a 1µA power-down mode. Confirm pin-for-pin signal compatibility, input range, reference requirements, and timing before substituting it into an existing design.
Is MAX113EAG+ the same as MAX113CAG+?
The MAX113EAG+ and MAX113CAG+ are closely related 24-pin SSOP converters with the same stated 8-bit resolution, four-channel configuration, 400ksps conversion rate, and 1µA power-down mode. They can be treated as replacement candidates, but a PCB swap still requires verification of every pin, supply range, analog input range, digital output timing, and start-up sequence against the manufacturer datasheets.
MAX113EAG+ vs MAX113CAG+ - which is better for sensor acquisition?
Choose between the MAX113EAG+ and MAX113CAG+ by reviewing their pin assignments and electrical limits rather than the shared headline specifications. Both are described as 8-bit, four-channel, 400ksps ADCs in 24-pin SSOP packages, so conversion throughput is comparable. Select the variant whose datasheet explicitly supports the required input range, reference configuration, timing, operating temperature, and production configuration.
When should I choose MAX113EAG+ over MAX113CAG+?
Choose the MAX113EAG+ when it is the released, qualified configuration for your PCB and its manufacturer datasheet matches the required electrical behavior. Choose the MAX113CAG+ when that specific orderable variant is the validated source for a new or replacement build. Because both use the 24-pin SSOP family and share major conversion specifications, final selection should follow pin-level and lifecycle checks.
Is MAX113EAG+ suitable for industrial sensor acquisition?
The MAX113EAG+ can suit industrial sensor acquisition when the measured signals fall within its specified analog range and the required acquisition speed is no greater than 400ksps. Its four analog channels are useful for multiple sensor inputs, while the microprocessor-compatible interface simplifies connection to a controller. Industrial qualification still requires checking operating-temperature limits, supply behavior, noise performance, and isolation requirements.
Is there a cross-brand drop-in equivalent for MAX113EAG+?
No cross-brand drop-in equivalent for the MAX113EAG+ is confirmed by the manufacturer literature identified for this product. A same-package substitute must match the 24-pin SSOP footprint, 8-bit resolution, four-channel arrangement, 400ksps class of performance, input range, reference scheme, and digital interface. Use the Request a Quote form on this page to request assistance with a qualified replacement, and validate any proposed substitute against both datasheets.
How much power does MAX113EAG+ consume in power-down mode?
The MAX113EAG+ has a specified power-down current of 1µA. This low standby figure makes the converter suitable for portable instruments and embedded systems that spend substantial time between measurement cycles. Active current, complete supply-consumption limits, and wake-up timing should be taken from the manufacturer datasheet because they depend on supply voltage, interface state, and operating mode.
Where to buy MAX113EAG+ online?
Use the Request a Quote form on this page to request MAX113EAG+ availability, lead time, and order details. The form connects the request directly with XAIPART without requiring a marketplace listing or a static price commitment. Include the required package variant, quantity, target date, and any compliance requirements so the sourcing response matches the intended build.
What is the price of MAX113EAG+?
Current pricing for the MAX113EAG+ is established through the Request a Quote form on this page. The structured price area updates with channel and quantity information rather than embedding a potentially stale value in technical content. Submit the required order quantity, packaging preference, shipment destination, and target date to obtain a current quotation for the exact MAX113EAG+ configuration.
What is the lead time for MAX113EAG+?
The current lead time for MAX113EAG+ should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, selected orderable suffix, production status, and shipment destination. Provide the planned build schedule and required quantity with the request so XAIPART can return an actionable availability and delivery response.
Is MAX113EAG+ in stock?
Current MAX113EAG+ stock status is handled through the Request a Quote form on this page. Submit the required quantity, package variant, destination, and target delivery date for a current availability response. This avoids presenting a static inventory claim that could change independently of the requested quantity and replenishment schedule.
Does MAX113EAG+ support a low-power shutdown mode?
Yes, the MAX113EAG+ includes a power-down mode with a specified current of 1µA. The Maxim Integrated datasheet identifies the device as a +3V, 400ksps, four- or eight-channel family member with 1µA power-down operation. The converter is therefore suitable for duty-cycled measurement systems, although wake-up timing and required sequencing must be observed for valid acquisition results.

داتای سەرچاوەی ئەندازیاری بۆ MAX113EAG+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX113EAG+ when the design needs a compact 24-pin SSOP converter with four analog inputs, 8-bit resolution, a 400ksps acquisition rate, and operation from a single +3V supply. Its 1.8µs conversion time and 1µA power-down mode make it appropriate for embedded sensor acquisition, panel metering, process monitoring, and portable instruments. Consider the MAX113CAG+ when it is the specifically qualified orderable configuration for the intended production build; its stated resolution, throughput, conversion time, and power-down current align with the target. Use a MAX117-family option when more channels are valuable enough to justify reviewing a different pin and functional arrangement. No cross-brand substitute should be selected solely from package similarity: verify every pin, analog input range, reference connection, timing specification, and operating-temperature requirement before approving a replacement.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX113CAG+ MAX117CAG+ MAX117EAG+
Package 24-pin SSOP 24-pin SSOP 24-pin SSOP 24-pin SSOP
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Resolution 8 bit 8 bit 8 bit 8 bit
Conversion Rate 400ksps 400ksps 400ksps 400ksps
Conversion Time 1.8µs 1.8µs 1.8µs 1.8µs
Supply Voltage +3V +3V +3V +3V
Power-Down Current 1µA 1µA 1µA 1µA
Conversion Architecture Half-flash, 1 flash conversion Half-flash, 1 flash conversion Half-flash, 1 flash conversion Half-flash, 1 flash conversion
Digital Interface Microprocessor-compatible Microprocessor-compatible Microprocessor-compatible Microprocessor-compatible

جیاکەرەوە سەرەکییەکان

  • Matches the four-channel MAX113 family configuration in the same 24-pin SSOP footprint (بەراورد بەMAX113CAG+)
  • Provides a 400ksps acquisition rate for compact four-channel measurements (بەراورد بەMAX117CAG+)
  • Supports low-duty-cycle operation from a single +3V rail (بەراورد بەMAX117EAG+)

تێبینییەکانی دیزاین

Route each analog input directly to its assigned pin and keep the paths short, with no digital clock or bus traces running directly beneath them. Place input filtering components close to the converter so transient protection and anti-aliasing networks do not add long high-impedance routes. Use the manufacturer package drawing and pin-description table to preserve the 24-pin SSOP footprint and maintain adequate clearance around neighboring components.

Do not assume that an 8-bit converter can accurately measure a signal that crosses or approaches its allowed input range. Clamp external voltages, confirm the reference configuration, and account for source impedance during each conversion. The MAX113EAG+ uses a half-flash architecture with a stated 1.8µs conversion time, so acquisition and sample-and-hold settling requirements must be checked before reading the result.

Provide a stable +3V rail and follow the manufacturer bypass recommendations at the supply pins. Keep converter current paths separate from noisy sensor returns and high-current digital loads. In portable equipment, include the active supply current, power-down current, and external circuit consumption in the battery budget; the converter's 1µA power-down figure alone does not determine total standby consumption.

Use a single consistent ground reference for the converter, reference network, input sources, and digital interface. If the analog source has appreciable impedance, include its settling behavior in the acquisition design rather than relying only on the nominal 1.8µs conversion time. Verify sampled-code repeatability under the intended switching conditions and add filtering where sensor or digital coupling causes unstable readings.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or the relevant declaration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX113EAG+ datasheet MAX113EAG+ pinout MAX113EAG+ datasheet pdf MAX113EAG+ specifications MAX113EAG+ equivalent MAX113EAG+ replacement MAX113EAG+ cross reference MAX113EAG+ vs MAX113CAG+ MAX113EAG+ SSOP-24 ADC MAX113EAG+ price MAX113EAG+ stock Maxim Integrated MAX113EAG+

پێکهاتە و زاراوە پەیوەندیدارەکان

Maxim Integrated MAX113EAG+ MAX113CAG+ MAX117CAG+ MAX117EAG+ analog-to-digital converter ADC data-conversion IC flash ADC half-flash architecture integrated circuit semiconductor microprocessor-compatible interface 8-bit resolution 400ksps conversion rate 1.8µs conversion time 1µA power-down current +3V supply 24-pin SSOP SSOP package family surface-mount package industrial sensor acquisition digital panel meter process monitoring
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ