MAX114EAG+ - 4-Channel 8-Bit 1Msps ADC | Analog Devices
MPN: MAX114EAG+ ✓ چالاکMAX114EAG+ گشتی
An ADC is an interface IC that converts an analog voltage into a digital code for processing, measurement, or control. This flash ADC belongs to the ADC/DAC hierarchy, combining an 8-bit quantization stage with parallel digital outputs and chip-select logic. Its four input channels make it suitable for acquiring several related analog signals without requiring four separate converter packages.
The MAX114EAG+ provides a 1Msps conversion rate, 8-bit resolution, four analog inputs, and one flash-conversion channel designation in the product description. Its single +5V supply simplifies system power architecture. An active-low PWRDN function reduces current consumption to typically 1 uA, while the manufacturer states that transition from power-down to normal operation takes less than 200 ns.
Internally, the converter uses Maxim's half-flash technique to achieve a 660 ns conversion time. The microprocessor interface is designed to simplify connection to parallel bus systems, allowing read data to be captured directly after a conversion cycle. This architecture favors straightforward control over conversion timing, making the ADC suitable for deterministic acquisition rather than high-resolution waveform analysis.
Typical applications include industrial control and measurement, industrial automation, embedded instrumentation, digital panel meters, sensor interfaces, and battery-powered portable measurement systems. The 8-bit resolution suits supervisory, control, and status measurements where 256 digital codes across the selected input range are sufficient. Multiple channels allow related transducer or potentiometer signals to be monitored sequentially.
Designers should verify input-range, reference-voltage, timing, and logic-level details in the manufacturer datasheet before setting the PCB. Treat the active-low PWRDN polarity correctly, allow adequate settling time between acquisitions, and account for analog trace routing and supply bypassing. The SSOP package requires attention to lead geometry and thermal conditions during assembly.
This product page consolidates the manufacturer specifications, family relationship, acquisition-oriented use cases, and replacement guidance for the MAX114EAG+. It is intended to help engineers identify whether its 4-channel, 8-bit, 1Msps architecture fits a new design or whether a different converter family is required for higher resolution, greater sampling speed, or more channels.
جێگرەوەکانی جێگۆڕکێ بۆ MAX114EAG+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX114EAG+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, RoHS Status.
MAX114CAG+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX114EAG+ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 8 bit |
| Input Channels | 4 channels |
| Flash Conversion Channels | 1 channel |
| ڕێژەی نموونەگرتن | 1 Msps |
| Conversion Time | 660 ns |
| ڤۆڵتیەی دابینکردن | +5 V |
| Converter Architecture | Half-flash |
| Power-Down Current | Typically 1 uA |
| Power-Down Wake Time | Less than 200 ns |
| Power-Down Input | Active-low PWRDN |
| جۆری ڕووکار | Microprocessor-compatible parallel interface |
| پاکێج | 24-pin SSOP |
| جۆری دامەزراندن | Surface-mount |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
ڕێنمایی ڕێکخستنی پینی MAX114EAG+ 24-pin ssop
ڕێکخستنی پین بۆ MAX114EAG+ (پاکێجی 24-pin ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX114EAG+.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX114EAG+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panels, Embedded Sensor Acquisition, Digital Panel Meters, Battery-Powered Measurement, Industrial Automation, Portable Instrumentation.
Industrial Control Panels
The MAX114EAG+ fits industrial control-panel designs that need to read several low-bandwidth analog command or status signals with a parallel processor interface. Its four analog inputs allow related potentiometer positions, divider voltages, and sensor outputs to be acquired sequentially, while the 8-bit format provides 256 codes across the selected range. The 1Msps rate is substantially faster than typical human-interface update rates, and the single +5V supply simplifies system power planning. The active-low PWRDN control can disable the converter during idle periods, with typical power-down current of 1 uA and recovery in less than 200 ns. Confirm input range, reference voltage, timing, and absolute maximum ratings in the MAX114 datasheet before finalizing the front-end divider and protection network.
پێشنیارکراو
Embedded Sensor Acquisition
The MAX114EAG+ is appropriate for embedded acquisition of four moderately precise sensor signals where a parallel microcontroller interface and rapid conversion simplify the firmware. It can sample resistive dividers, simple resistive sensors, and conditioned analog outputs without requiring a serial ADC and its associated clocking. The 8-bit resolution makes the device most appropriate for supervisory measurements rather than precision analysis, while 1Msps sampling provides ample timing margin for many periodic control loops. Its +5V analog supply and active-low shutdown support systems that already include a 5V rail. Apply channel-specific input conditioning, maintain adequate settling time, and verify the allowed input range and reference arrangement in the manufacturer datasheet.
پێشنیارکراو
Digital Panel Meters
The MAX114EAG+ can serve as the acquisition element in a digital panel meter that must display several analog quantities such as level, position, supply margin, or setpoint status. Four channels reduce the number of converters needed when the display controller offers a parallel bus, and the 660 ns stated conversion time supports rapid display refresh. Its 8-bit resolution is suitable for basic bar graphs, indicator bands, and simplified numeric readouts, provided the analog scaling preserves adequate resolution near the displayed decision thresholds. The MAX114EAG+ also fits battery-instrument concepts because PWRDN can reduce current to typically 1 uA between readings. Design the front end for the intended full-scale value and confirm reference accuracy and input settling behavior.
پێشنیارکراو
Battery-Powered Measurement
The MAX114EAG+ supports battery-powered measurement systems that periodically acquire a small group of analog signals and then return to a low-power state. Its active-low PWRDN input reduces current consumption to typically 1 uA, and the manufacturer specifies a return to normal operation in less than 200 ns. This behavior allows a microcontroller to coordinate short conversion bursts without leaving the ADC fully active. Four channels can consolidate several slowly changing measurements, while the 1Msps rate makes the device more than adequate for periodic readings. Account for the supply current of the 5V regulator, the converter's active consumption, analog-conditioning leakage, and wake-up timing. Use the datasheet to establish the complete settling and conversion sequence.
پێشنیارکراو
Industrial Automation
The MAX114EAG+ is well suited to industrial automation modules that monitor several slow analog process variables and report them to a local controller. The four-channel architecture supports multiplexed acquisition of limit signals, actuator feedback, or scaled process measurements, while the microprocessor-compatible interface avoids requiring a dedicated serial protocol. A 1Msps conversion rate provides more timing margin than most process-control loops require, although loop bandwidth and sensor dynamics—not converter speed—will set the useful update rate. The single +5V supply simplifies integration with legacy 5V control electronics. Protect external inputs against industrial transients, keep analog routing compact, and follow the MAX114 datasheet for allowable input ranges, reference requirements, and acquisition timing.
پێشنیارکراو
Portable Instrumentation
The MAX114EAG+ can support portable test and measurement instruments that collect several analog readings while keeping board area and power consumption controlled. Its 24-pin SSOP package is compatible with compact through-hole assembly workflows, and the parallel interface can connect efficiently to a microcontroller with enough input pins. Four channels are useful for comparing a measurement against a reference or capturing several test points. The 8-bit resolution is best for go/no-go indicators, coarse calibration, and trending rather than laboratory-grade accuracy. PWRDN supports duty-cycled operation, with typical 1 uA power-down current and less than 200 ns recovery. Validate connector protection, analog bandwidth, reference stability, and acquisition latency for the intended test sequence.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX114EAG+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX114CAG+ |
|---|---|---|
| Package | 24-pin SSOP | 24-pin SSOP |
| Brand | Analog Devices | Analog Devices |
| Resolution | 8 bit | 8 bit |
| Input Channels | 4 channels | 4 channels |
| Sampling Rate | 1 Msps | 1 Msps |
| Conversion Time | 660 ns | 660 ns |
| Supply Voltage | +5 V | +5 V |
| Power-Down Current | Typically 1 uA | Typically 1 uA |
| Conversion Architecture | Half-flash | Half-flash |
| Temperature Grade | MAX114EAG+ grade | MAX114CAG+ grade |
جیاکەرەوە سەرەکییەکان
- Four-channel acquisition without adding four converter packages (بەراورد بەMAX114CAG+)
- Fast half-flash sampling with a parallel interface (بەراورد بەMAX114CAG+)
- Fast shutdown recovery for duty-cycled acquisition (بەراورد بەMAX114CAG+)
تێبینییەکانی دیزاین
Place the MAX114EAG+ close to the analog sources and place its input, reference, and bypass connections according to the manufacturer layout guidance. Keep digital output and control traces away from sensitive analog inputs to reduce switching coupling into the conversion result. The 24-pin SSOP footprint requires careful component placement and adequate solder-joint inspection because closely spaced leads can increase assembly difficulty and reduce solderability.
Do not begin analog PCB routing until the allowed input range, source impedance, acquisition timing, and reference arrangement are confirmed in the MAX114 datasheet. Include the specified bypass capacitors and maintain short return paths for supply and reference connections. Treat the stated 660 ns conversion time as distinct from the total sample-and-hold acquisition interval, and test the complete signal-chain settling behavior across all four channels.
PWRDN is active low, so a low logic level disables normal operation rather than activating the converter. Confirm that the host logic can drive the required levels and that software accounts for wake-up and conversion sequencing. Also avoid assuming that 1Msps implies a 1Msps sustained update rate for every source; sensor bandwidth, multiplexing time, reference settling, and firmware overhead determine the practical acquisition rate.
زانیاری پابەندبوون
The listed product information does not explicitly establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this orderable device. AEC-Q100 is marked not applicable because the part is not identified as an automotive-qualified product.