Texas Instruments

MAX202IDG4 - 5V Dual RS-232 Transceiver | Texas Instruments

MPN: MAX202IDG4 ✓ چالاک
5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX202IDG4 گشتی

The Texas Instruments MAX202IDG4 is a 5 V dual RS-232 line driver and receiver with two transmit channels, two receive channels, and integrated charge-pump voltage generation. It supports data rates up to 120 kbps, provides ±9 V driver outputs, and includes ±15 kV ESD protection on the serial-port pins. The device is packaged in a 16-pin SOIC.

An RS-232 interface transceiver is an interface IC that converts logic-level signals between a computer or embedded controller and the voltage levels used by an RS-232 serial link. In the signal path, the line-driver section converts TTL or CMOS logic into bipolar RS-232 levels, while the receiver section restores the logic signal. As a transceiver, the MAX202IDG4 combines both functions within one package.

Key features include a single 5 V supply, dual-driver and dual-receiver configuration, ±15 kV ESD protection, and operation over the industrial temperature range of -40°C to +85°C. The integrated dual charge-pump circuit generates the positive and negative voltages required by the RS-232 drivers, eliminating the need for external supply rails. The ±9 V output swing provides compatibility with standard RS-232 links.

The device meets EIA-232-F requirements and supports full-duplex serial communication through two independent driver and receiver paths. Its 120 kbps maximum data rate suits legacy serial ports, industrial control links, service interfaces, and embedded systems that retain an RS-232 connector. The integrated ESD structures improve robustness at connector-facing pins, although external protection and layout practices remain important in exposed environments.

Typical applications include industrial serial controllers, laboratory equipment, POS terminals, data-acquisition systems, and service ports for embedded equipment. The MAX202IDG4 is particularly useful where a logic-level UART must communicate with an RS-232 host through a 16-SOIC footprint.

When laying out the circuit, place the charge-pump capacitors and the receiver and driver bypass capacitors directly beside their associated pins. Route connector-side traces away from sensitive logic, and connect the interface ground reference properly. Verify the UART baud rate against the device's 120 kbps limit and confirm the cable length against the selected RS-232 standard.

This page combines manufacturer specifications, application guidance, drop-in comparison options, and practical interface-design notes to help engineers evaluate the MAX202IDG4 beyond a basic catalog description.

جێگرەوەکانی جێگۆڕکێ بۆ MAX202IDG4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX202IDG4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ESD Protection, Product Type, Interface Standard, Supply Voltage, Package.

Analog Devices
Product Type: 2-channel RS-232 line driver/receiver transceiver
Interface Standard: TIA/EIA-232-E
Package: 16-SOIC
بەراوردکردن لەگەڵ MAX202IDG4 →
Maxim Integrated
ESD Protection: ±15 kV HBM
Product Type: RS-232 transceiver
Supply Voltage: +5 V
بەراوردکردن لەگەڵ MAX202IDG4 →
Analog Devices
ESD Protection: ±15kV HBM
Interface Standard: RS-232
Supply Voltage: +5V
بەراوردکردن لەگەڵ MAX202IDG4 →
Texas Instruments
ESD Protection: ±15 kV human-body-model protection
Product Type: 5 V dual RS-232 line driver/receiver
Supply Voltage: 5 V nominal
بەراوردکردن لەگەڵ MAX202IDG4 →
Texas Instruments
ESD Protection: ±15 kV human-body-model protection
Product Type: 5 V dual RS-232 line driver/receiver
Supply Voltage: 5 V nominal
بەراوردکردن لەگەڵ MAX202IDG4 →
Texas Instruments
ESD Protection: Exceeds 2,000 V human-body protection under the cited JESD condition
Product Type: Dual RS-232 driver/receiver transceiver
Interface Standard: EIA/TIA-232-F
بەراوردکردن لەگەڵ MAX202IDG4 →

MAX202ID

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 16-SOIC
5 V dual RS-232 line driver/receiver · 2 line drivers and 2 line receivers · 120 kbps · 5 V nominal · -40 °C to +85 °C · ±9 V · ±15 kV human-body-model protection · Four 0.1 µF capacitors

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX202ESE

✅ جێگرەوەی ڕاستەوخۆ
📦 16-SOIC
Same MAX202 family and 120 kbps data rate, a 0 kbps difference; ordering and qualification details require confirmation

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX202EESE+T

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 16-SOIC
2 driver and 2 receiver channels · RS-232 · EIA/TIA-232E and CCITT V.28 · 120kbps · +5V · ±15kV HBM · Integrated · ±5V EIA/TIA-232E levels

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADM202JRWZ

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 16-SOIC
2-channel RS-232 line driver/receiver transceiver · 5 V · 2 channels · 2 channels · Full duplex · +10 V and -10 V · 0.1 µF minimum · CMOS

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADM202JRNZ

✅ جێگرەوەی ڕاستەوخۆ
📦 16-SOIC
Both are 5 V 2/2 RS-232 transceivers at up to 120 kbps, a 0 kbps data-rate difference; package suffix and qualification details require confirmation

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX202IDG4 تایبەتمەندییەکان

Product Type Dual RS-232 line driver/receiver transceiver
ڤۆڵتیەی دابینکردن 5 V
Operating Supply Range 4.5 V to 5.5 V
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 120 kbps
Driver Output Swing ±9 V
ESD Protection ±15 kV
Charge-Pump Configuration Dual integrated charge-pump circuit
Interface Standard TIA/EIA-232-F
پلەی گەرمیی کارکردن -40°C to +85°C
پاکێج 16-pin SOIC
جۆری دامەزراندن Surface mount
Automotive Qualification Not AEC-Q100 qualified

ڕێنمایی ڕێکخستنی پینی MAX202IDG4 16-pin soic

ڕێکخستنی پین بۆ MAX202IDG4 (پاکێجی 16-pin soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-pin soic بۆ MAX202IDG4

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX202IDG4.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX202IDG4 گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Controllers, Data-Acquisition Systems, Point-of-Sale Terminals, Laboratory Equipment Service Ports, Embedded Maintenance Interfaces, Telecommunications Network Equipment.

🏭

Industrial Serial Controllers

The MAX202IDG4 fits industrial control equipment that retains an RS-232 service or data port. Its two transmitters and two receivers support two RS-232 channels, while the 120 kbps data rate covers conventional UART communication. The -40°C to +85°C rating suits temperature-controlled industrial enclosures, and the ±15 kV ESD protection strengthens connector-facing robustness. Place the charge-pump capacitors close to the device and use the manufacturer grounding and bypass layouts to preserve signal integrity between the UART and external connector.

📊

Data-Acquisition Systems

MAX202IDG4 provides the physical RS-232 layer for laboratory and industrial data-acquisition controllers. The receiver converts bipolar serial levels to logic signals for the host MCU or DSP, while the driver supports the opposite direction. Its 120 kbps limit is suitable for command traffic and moderate-rate instrument telemetry rather than continuous high-bandwidth transfer. The 5 V supply simplifies integration with embedded processors, and the 16-SOIC footprint supports compact control boards requiring bidirectional serial communication.

🖥️

Point-of-Sale Terminals

The MAX202IDG4 can connect a compact POS terminal or peripheral controller to an RS-232 receipt printer, scanner, or service interface. Two driver and receiver channels allow simultaneous command and status paths, while the 120 kbps rate is appropriate for legacy transaction traffic. Its 16-SOIC package fits dense control boards, and ±15 kV ESD protection helps protect connector-facing circuitry in retail equipment. Shielded cables, proper reference grounding, and enclosure design remain necessary for reliable field operation.

🔧

Laboratory Equipment Service Ports

MAX202IDG4 is appropriate for service and diagnostic ports on bench instruments because it combines a dual RS-232 interface with a compact 16-SOIC package. The two channels can support separate command and response wiring when a design requires two RS-232 links. Its 120 kbps maximum rate is adequate for configuration consoles and low-volume telemetry, while the industrial temperature range supports equipment intended for controlled industrial environments. Follow the datasheet capacitor values and route connector traces away from precision analog circuitry.

🧩

Embedded Maintenance Interfaces

The MAX202IDG4 supports legacy maintenance and configuration interfaces on embedded controllers where an RS-232 connector remains part of the mechanical design. The 5 V device interfaces directly with a UART through integrated level translation, and the 120 kbps rate accommodates firmware-console traffic. A 16-SOIC package reduces routing congestion on a control PCB, while ESD protection helps manage static discharge at an accessible connector. Firmware should add framing, timeout, and authentication controls around the physical link.

🌐

Telecommunications Network Equipment

MAX202IDG4 can serve as a management-console interface in telecommunications and industrial network equipment. Dual RS-232 channels support management and diagnostic wiring, and the 120 kbps rate matches typical console and status protocols. The -40°C to +85°C operating range is useful in managed indoor or protected equipment, while the integrated charge pumps remove the need for external bipolar rails. Engineering teams should still evaluate chassis grounding, cable surge exposure, isolation, and regulatory requirements for the installation environment.

What is the MAX202IDG4?
The MAX202IDG4 is a 5 V dual RS-232 transceiver from Texas Instruments with two line drivers, two receivers, and an integrated dual charge-pump circuit. According to the manufacturer product page, it operates up to 120 kbps, produces ±9 V driver outputs, and provides ±15 kV ESD protection on the serial-port pins. It is packaged in a 16-pin SOIC for embedded and industrial serial-interface designs.
Where can I download the MAX202IDG4 datasheet PDF?
The MAX202IDG4 datasheet PDF is available from the official Texas Instruments product page at https://www.ti.com/product/MAX202. The manufacturer documentation describes the 5 V dual line-driver/receiver configuration, charge-pump circuit, electrical characteristics, pin functions, and typical application circuits. Use the manufacturer PDF for final pin assignments, capacitor values, and operating limits before committing the PCB design.
Where can I find the MAX202IDG4 pinout?
The MAX202IDG4 pinout is shown in the pin-configuration section of the official MAX202 datasheet at https://www.ti.com/lit/ds/symlink/max202.pdf. The part uses a 16-pin SOIC and includes charge-pump, driver-output, receiver-input, supply, enable, and ground connections. Assign PCB tracks from the datasheet pin-description table rather than inferring positions from a generic RS-232 transceiver diagram.
Where can I buy MAX202IDG4 online?
Use the Request a Quote form on this page to request the MAX202IDG4, current availability, and a purchase order quotation from XAIPART. The exact Texas Instruments ordering code is MAX202IDG4, corresponding to the 16-SOIC package. Confirm the requested quantity, shipment destination, and acceptable lead time during the quotation process so the order is matched to the exact packaged MPN.
What is the price of MAX202IDG4?
Request the current MAX202IDG4 quotation through the Request a Quote form on this page. The form is the appropriate channel for price, stock confirmation, and order-specific terms because commercial conditions can vary with quantity and availability. Submit the exact MPN, target quantity, package preference, and delivery destination to receive a current response without relying on an outdated catalog amount.
What is the lead time for MAX202IDG4?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on the exact order quantity, shipment destination, and current manufacturer channel availability. Include the MAX202IDG4 ordering code and required delivery schedule so procurement can confirm a supply commitment for the 16-SOIC device.
Is MAX202IDG4 in stock?
Stock status should be confirmed through the Request a Quote form on this page before an order is committed. The form accepts the required MAX202IDG4 quantity and delivery information for a current availability response. This avoids treating a generic product listing as confirmation that inventory is immediately available for a specific order.
What are the key specifications of MAX202IDG4 that engineers should know?
The MAX202IDG4 combines two RS-232 drivers, two receivers, and a dual charge-pump circuit in a 16-pin SOIC. Its principal ratings include a 5 V supply, operation from 4.5 V to 5.5 V, a maximum data rate of 120 kbps, ±9 V driver outputs, and ±15 kV ESD protection. According to Texas Instruments, the device meets TIA/EIA-232-F requirements and supports an industrial temperature range of -40°C to +85°C.
What can replace the MAX202IDG4?
The MAX202IDG4 can be replaced only by a 16-pin RS-232 transceiver whose supply, data rate, driver-output levels, receiver thresholds, and pin functions match the original design. Comparable options include the MAX202 family ordering codes MAX202ID and MAX202ESE, plus Analog Devices ADM202JRNZ and ADM202JRWZ. Confirm the exact pinout, temperature grade, shutdown behavior, and ESD rating against the manufacturer documentation before substitution.
Is MAX202IDG4 the same as ADM202JRWZ?
MAX202IDG4 and ADM202JRWZ are both listed as dual-channel RS-232 transceivers in 16-SOIC packages, making ADM202JRWZ a close functional comparison. Texas Instruments specifies MAX202IDG4 for 5 V operation, 120 kbps, ±9 V outputs, and ±15 kV ESD protection. Final interchangeability should be confirmed by comparing every pin, power requirement, propagation delay, and electrical limit in the two manufacturers' datasheets.
What is the best Analog Devices equivalent for MAX202IDG4?
ADM202JRWZ is the closest Analog Devices comparison in the 16-SOIC format for MAX202IDG4. Both devices are presented as 2/2 full-duplex RS-232 transceivers, while MAX202IDG4 is specified at 5 V, 120 kbps, and ±15 kV ESD protection. Treat the cross-brand replacement as a design-review candidate and verify pin functions, supply current, receiver thresholds, and package details before approving it as a drop-in replacement.
MAX202IDG4 vs MAX202ID - which is better?
MAX202IDG4 and MAX202ID belong to the same MAX202 family, but the ordering suffixes should be compared for package, temperature, and delivery configuration rather than assumed identical. MAX202IDG4 is specifically identified as a 16-SOIC industrial-temperature part. Use MAX202ID only when its manufacturer ordering information confirms the same footprint and electrical configuration required by the existing board.
When should I choose MAX202IDG4 over MAX202ESE?
Choose MAX202IDG4 when the assembly requires the exact 16-SOIC ordering configuration and its specified -40°C to +85°C operating range. Choose MAX202ESE when its manufacturer ordering details match the board and offer a more appropriate qualification or lifecycle position for the design. Because both are part of the MAX202 family, compare the complete ordering table, pin configuration, and qualification requirements rather than relying on the suffix alone.
Is MAX202IDG4 suitable for industrial equipment?
MAX202IDG4 is suitable for many industrial equipment interfaces because it supports 4.5 V to 5.5 V operation, a 120 kbps data rate, and a -40°C to +85°C temperature range. The device also offers ±15 kV ESD protection on connector-facing pins. Industrial suitability still depends on the enclosure, cabling, grounding, surge environment, regulatory requirements, and system-level ESD design.
Does MAX202IDG4 need external RS-232 voltage supplies?
MAX202IDG4 does not require external positive and negative RS-232 supplies. Its integrated dual charge-pump circuit generates the bipolar voltage levels needed by the two line drivers from a single 5 V supply. The manufacturer documentation specifies the required external charge-pump and bypass capacitors, so follow those values and placement instructions rather than relying on generic interface examples.
What design considerations apply to a MAX202IDG4 RS-232 interface?
Place the charge-pump capacitors and supply bypass capacitors close to their associated MAX202IDG4 pins, and route connector-side driver and receiver traces away from sensitive logic. Use the datasheet's ground and enable arrangements, verify the UART baud rate against 120 kbps, and provide chassis grounding or additional protection for exposed installations. ESD protection reduces connector-pin stress but does not replace a sound enclosure and surge strategy.

داتای سەرچاوەی ئەندازیاری بۆ MAX202IDG4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose MAX202IDG4 for a new or existing design that requires a 16-SOIC, 5 V, dual-channel RS-232 interface with operation up to 120 kbps and ±15 kV connector-pin ESD protection. Its -40°C to +85°C range is appropriate for controlled industrial equipment. MAX202ID or MAX202ESE can be considered when their ordering details confirm the required footprint, qualification, and lifecycle position; MAX202EESE+T warrants a similar review. ADM202JRWZ and ADM202JRNZ are useful cross-brand candidates, but their pin maps and electrical limits must be compared with the MAX202IDG4 datasheet before being treated as drop-in parts. For designs requiring data rates above 120 kbps, lower ESD protection, isolated communication, or automatic shutdown, select an interface outside this replacement set.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX202ID MAX202ESE ADM202JRWZ ADM202JRNZ
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver
Number of Drivers 2 2 2 2 2
Number of Receivers 2 2 2 2 2
Supply Voltage 5 V 5 V 5 V 5 V 5 V
Maximum Data Rate 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps

جیاکەرەوە سەرەکییەکان

  • Dual-channel integration in a compact interface package (بەراورد بەADM202JRWZ)
  • Connector-facing ESD protection (بەراورد بەMAX202ESE)
  • Industrial temperature capability (بەراورد بەMAX202ID)
  • Single-supply bipolar RS-232 operation (بەراورد بەADM202JRNZ)

تێبینییەکانی دیزاین

Place the charge-pump capacitors and the device bypass capacitor directly beside the corresponding MAX202IDG4 pins. Keep these components on the ground side of the layout and use the shortest practical return paths. Connect the connector-facing driver and receiver traces away from precision analog, clock, and high-speed digital nets. The 16-SOIC footprint leaves little room for long capacitor leads, so prioritize component orientation, ground return, and loop-area control during placement.

Treat the RS-232 connector as an electrically noisy boundary. Use the receiver inputs only for protected connector signals, keep output and input routing separate, and avoid sharing narrow ground paths with sensitive analog circuitry. The interface supports up to 120 kbps, so UART timing should remain comfortably below that ceiling and cable length, termination, grounding, and shielding should be selected for the installation environment.

Do not substitute a generic RS-232 transceiver solely from its 16-SOIC package. Verify the complete pin map, enable polarity, receiver thresholds, driver-output levels, supply-current behavior, shutdown options, and ESD rating. MAX202ID, MAX202ESE, MAX202EESE+T, ADM202JRWZ, and ADM202JRNZ are candidate comparisons, but each approved substitution requires a manufacturer-datasheet review against the assembled board.

Locate the RS-232 connector near the board edge and provide a low-impedance chassis or signal-ground path according to the product's EMC design. Keep the charge-pump current loops compact because they can return energy into the supply plane. If the interface is exposed to cables longer than the intended RS-232 application range, evaluate connector-level surge protection and isolation rather than relying solely on the MAX202IDG4's ±15 kV ESD protection.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The part meets TIA/EIA-232-F according to the manufacturer documentation. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer product documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-02 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX202IDG4 datasheet MAX202IDG4 pinout MAX202IDG4 datasheet pdf Texas Instruments MAX202IDG4 MAX202IDG4 equivalent MAX202IDG4 replacement MAX202IDG4 vs ADM202JRWZ MAX202IDG4 16-SOIC footprint MAX202IDG4 120 kbps RS-232 MAX202IDG4 industrial serial interface MAX202IDG4 price MAX202IDG4 stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments MAX202IDG4 MAX202ID MAX202ESE MAX202EESE+T ADM202JRWZ ADM202JRNZ Analog Devices RS-232 transceiver line driver line receiver interface IC serial interface dual charge-pump TIA/EIA-232-F 120 kbps 5 V supply ±9 V output ±15 kV ESD protection 16-SOIC SOIC family surface-mount package industrial electronics embedded UART
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ