ADM202JRWZ - 5V Dual RS-232 Transceiver | Analog Devices
MPN: ADM202JRWZ ✓ چالاکADM202JRWZ گشتی
An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a cable-based RS-232 port. It combines a line driver, which converts low-voltage digital signals into RS-232-compatible levels, with a receiver, which converts incoming RS-232 levels back into logic levels. Within the interface hierarchy, the ADM202JRWZ belongs to the RS-232 driver/receiver and transceiver class of data-communication interface ICs.
Key features include operation from one 5 V supply, two transmit and two receive channels, an efficient on-chip charge pump, and approximately ±10 V bipolar output levels. According to the Analog Devices product information, the device meets or exceeds the TIA/EIA-232-E and V.28 specifications. The small 0.1 µF charge-pump capacitors reduce external component size, while the integrated charge-pump circuit simplifies implementation of a working RS-232 port.
The ADM202 architecture separates the two communication directions, allowing full-duplex operation when the corresponding driver outputs and receiver inputs are connected to the same RS-232 lines. Fast driver slew rates support reliable data transmission, and the CMOS-compatible logic interface allows the device to connect directly to a host UART or other digital controller. The 16-SOIC package is suitable for conventional through-hole assembly and automated surface-mount production.
Typical uses include industrial serial consoles, instrumentation, data acquisition equipment, embedded-control systems, and legacy peripheral connections. Two transceiver channels can serve two RS-232 ports or connect to a multiport interface arrangement. The 5 V operating supply also simplifies integration with equipment designed around TTL/CMOS logic and a separate regulated 5 V rail.
PCB design should prioritize short charge-pump capacitor connections, a low-impedance ground return, and protection appropriate to the exposed connector environment. Keep sensitive receiver traces away from fast driver outputs and switching nodes, and follow the pin-description and decoupling guidance in the manufacturer datasheet when assigning tracks and grounding the device.
This product guide combines the manufacturer application details with package, purchasing, replacement, and implementation guidance for engineers evaluating the ADM202JRWZ. It emphasizes the verified 5 V, dual-channel, charge-pump, ±10 V, and 16-SOIC characteristics while separating confirmed information from specifications that still require datasheet confirmation.
جێگرەوەکانی جێگۆڕکێ بۆ ADM202JRWZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADM202JRWZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Interface Standard, Product Type, Package, ESD Protection, Lead-Free Status.
ADM202JRN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADM202JRNZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX202IDG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADM202JRWZ تایبەتمەندییەکان
| Product Type | 2-channel RS-232 line driver/receiver transceiver |
| ڤۆڵتیەی دابینکردن | 5 V |
| Driver Channel Count | 2 channels |
| Receiver Channel Count | 2 channels |
| Duplex Mode | Full duplex |
| RS-232 Output Level | +10 V and -10 V |
| Charge-Pump Capacitor Value | 0.1 µF minimum |
| Logic Compatibility | CMOS |
| Interface Standard | TIA/EIA-232-E |
| Interface Standard | V.28 |
| پاکێج | 16-SOIC |
| جۆری دامەزراندن | Surface mount |
| دۆخی RoHS | Compliant |
| Lead-Free Status | Yes |
| Green Product Status | Yes |
ڕێنمایی ڕێکخستنی پینی ADM202JRWZ 16-soic
ڕێکخستنی پین بۆ ADM202JRWZ (پاکێجی 16-soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADM202JRWZ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADM202JRWZ گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Console, Data Acquisition Equipment, Embedded Controller Interface, Test and Measurement Instrument, Legacy Peripheral Adapter, Communication Port Concentrator.
Industrial Serial Console
The ADM202JRWZ fits an industrial console that exchanges commands and diagnostic data over an RS-232 connection. Its single 5 V supply and two full-duplex channels allow one port to serve a control link while another handles status or service traffic. The integrated charge pump produces approximately +10 V and -10 V levels, and charge-pump capacitors as small as 0.1 µF support compact implementation. Place the device close to the connector and logic source, maintain a continuous ground return, and add external protection when the cable leaves the enclosure.
پێشنیارکراو
Data Acquisition Equipment
The ADM202JRWZ is useful in laboratory and industrial data-acquisition equipment that must communicate with older instruments through RS-232. Two transmit and two receive channels support full-duplex instrument control and measurement results without requiring separate driver and receiver packages. Operation from one 5 V rail simplifies the interface supply, while the approximately ±10 V charge-pump output matches the required bipolar RS-232 levels. Keep the analog and high-speed digital sections separated from receiver traces and use the connector entry as the location for any selected surge-protection network.
پێشنیارکراو
Embedded Controller Interface
The ADM202JRWZ connects a modern embedded controller to legacy RS-232 peripherals while retaining two independent communication channels. The CMOS-compatible logic side works with a 5 V controller environment, and the integrated charge pump eliminates the need for a separate negative power supply for the RS-232 levels. Its 16-SOIC package is also convenient for designs assembled with mixed through-hole and surface-mount equipment. Confirm the controller UART logic levels and timing, route each driver output away from sensitive receiver inputs, and preserve the ground reference across the complete cable path.
پێشنیارکراو
Test and Measurement Instrument
The ADM202JRWZ can provide a compact bidirectional RS-232 control port in test and measurement instruments. Two full-duplex channels allow commands and responses to coexist on one port while preserving separate signaling paths. The 5 V supply and 0.1 µF-compatible charge-pump capacitors simplify board partitioning, particularly in portable or rack-mounted equipment where component area is important. For laboratory use, check the exact operating-temperature limits and data-rate rating in the manufacturer datasheet, and select connector protection based on the cable length and grounding arrangement.
پێشنیارکراو
Legacy Peripheral Adapter
The ADM202JRWZ is appropriate for adapters that add an RS-232 port to a modern controller or embedded system. Its dual full-duplex architecture can support two peripheral connections when the host has enough UART resources, while the on-chip charge pump reduces the number of external power components. The 16-SOIC footprint is straightforward to assemble and inspect, but cable-side protection remains essential because the connector is exposed to electrostatic discharge and switching transients. Select the adapter components and serial timing so both ends of the link use compatible RS-232 settings.
پێشنیارکراو
Communication Port Concentrator
The ADM202JRWZ can support concentrated legacy communication ports in equipment where space and supply rails are limited. Two RS-232 channels in one 16-SOIC package reduce the footprint compared with separate line-driver and receiver ICs, and the single 5 V operating supply eases power architecture. Its approximately ±10 V output levels satisfy the cited TIA/EIA-232-E and V.28 requirements. In a multiport assembly, maintain independent signal routing, provide a low-impedance common ground, and consider line-driver enable control or power gating if unused ports must be isolated during system startup.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADM202JRWZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADM202JRN | ADM202JRNZ | MAX202IDG4 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated |
| Package | 16-SOIC (RW) | 16-SOIC (RW) | 16-SOIC (RW) | 16-SOIC (RW) |
| Device Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Driver Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Receiver Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
جیاکەرەوە سەرەکییەکان
- Combines two complete RS-232 channels in one 16-SOIC package (بەراورد بەMAX3221IPWR)
- Uses compact charge-pump capacitors (بەراورد بەMAX202IDG4)
- Provides specified bipolar RS-232 levels from one supply (بەراورد بەMAX202IDG4)
تێبینییەکانی دیزاین
Place the 0.1 µF-compatible charge-pump capacitors and required bypass capacitors directly beside their associated ADM202JRWZ pins. Keep these loops short because charge-pump switching current produces high-frequency current edges. Route the charge-pump and driver paths away from receiver inputs to minimize differential crosstalk and maintain reliable operation across the supported RS-232 data rate.
Assign the two driver outputs and two receiver inputs according to the manufacturer pin-description table before finalizing the PCB. Keep each RS-232 cable route away from clocks, switching regulators, and high-current return paths. Provide a low-impedance ground reference, and use the connector entry area for any selected ESD or surge-protection components so chassis and system-ground decisions remain controlled.
Do not assume that every 16-SOIC RS-232 transceiver is electrically interchangeable. Before replacing ADM202JRWZ with ADM202JRN, ADM202JRNZ, or MAX202IDG4, compare charge-pump capacitor values, logic thresholds, driver and receiver enable functions, data rate, operating temperature, and ESD rating. The Z suffix denotes a tape-and-reel ordering option and should not be interpreted as an electrical change.
زانیاری پابەندبوون
The product record identifies ADM202JRWZ as RoHS-compliant, lead-free, and green. AEC-Q100 status is not stated for this RS-232 interface IC and is treated as not applicable rather than qualified.