Analog Devices

MAX211ECAI+ 4/5 RS-232 Transceiver, 5V, 120kbps | Analog Devices

MPN: MAX211ECAI+ ✗ کۆتایی ژیان
+5 V Vdss 28-pin SSOP Package
MOQ: 1 |

MAX211ECAI+ گشتی

The Analog Devices MAX211ECAI+ is a 4-driver, 5-receiver RS-232 transceiver operating from a single +5V supply in a 28-pin SSOP package. It supports data rates to 120kbps, maintains ±5V EIA/TIA-232E output levels under the specified load, and includes integrated ±15kV human-body-model ESD protection on its interface pins.

An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or peripheral into RS-232 line-level signals, while converting returning RS-232 signals back into logic-compatible levels. Within the electronics hierarchy, the MAX211ECAI+ belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor product group. Its integrated charge pump allows single-supply operation without a separate bipolar ±12V rail.

The device provides four line drivers and five line receivers in one package. This combination suits communications equipment that needs multiple RS-232 channels while limiting the number of external interface components. The 28-pin SSOP occupies 40% of the board area of the 28-pin wide SO option mentioned for the MAX211 and MAX213 families, making it useful where connector routing and PCB area are constrained.

Its integrated charge-pump circuitry generates the bipolar voltage needed by RS-232 drivers from a +5V supply. The receivers and drivers meet EIA/TIA-232E and V.28 requirements at data rates to 120kbps when loaded according to the manufacturer product page. Integrated high ±15kV HBM ESD protection improves robustness against electrostatic discharge encountered during connection and handling of external cabling.

Typical uses include industrial control consoles, serial adapters, data-acquisition equipment, POS terminals, and instrumentation requiring multiple RS-232 ports. The four-driver, five-receiver arrangement can support several unidirectional channels and one additional receive-only channel, subject to the exact logic and channel-assignment requirements of the host interface.

When laying out the PCB, place the charge-pump capacitors close to their designated pins and route RS-232 traces away from sensitive analog signals. Confirm the MAX211ECAI+ pinout and input/output logic in the manufacturer datasheet before assigning connector signals. Treat the ±15kV HBM rating as a human-body-model ESD rating, not as a broader system immunity guarantee.

This page organizes the manufacturer specifications, direct-sourcing information, functional alternatives, and PCB-level design considerations into one engineering reference. It also distinguishes true SSOP pin-compatible alternatives from wider-package or different-package devices that would require a board-layout change.

جێگرەوەکانی جێگۆڕکێ بۆ MAX211ECAI+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX211ECAI+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Maximum Data Rate, Number of Drivers, Number of Receivers, Package.

Analog Devices
Product Type: RS-232 / V.28 transceiver
Maximum Data Rate: 120 kbps
Number of Drivers: 4
بەراوردکردن لەگەڵ MAX211ECAI+ →
Texas Instruments
Product Type: RS-232 Line Driver/Receiver (Transceiver)
Number of Drivers: 4
Number of Receivers: 5
بەراوردکردن لەگەڵ MAX211ECAI+ →
Texas Instruments
Product Type: 5 V multichannel RS-232 line driver/receiver
Maximum Data Rate: 120 kbit/s
بەراوردکردن لەگەڵ MAX211ECAI+ →
Maxim Integrated
Product Type: RS-232 Transceiver (line driver/receiver)
Number of Drivers: 4
Number of Receivers: 5
بەراوردکردن لەگەڵ MAX211ECAI+ →

MAX213ECAI+

✅ جێگرەوەی ڕاستەوخۆ
Maxim Integrated
📦 28-pin SSOP
RS-232 Transceiver (line driver/receiver) · 4 · 5 · 4.5 V to 5.5 V (single +5V supply) · up to 120 kbps · ±15 kV on transmitter outputs and receiver inputs · 0 °C to +70 °C (commercial grade) · Tri-state, TTL/CMOS compatible

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX241EEAI

✅ جێگرەوەی ڕاستەوخۆ
📦 28-pin SSOP
Shares the +5 V RS-232 family, 4/5 transceiver arrangement, 120kbps-class operation, and 28-pin SSOP format, while shutdown behavior and exact pin functions must be confirmed from the MAX241 datasheet.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX211EAI+

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 28-pin SSOP
RS-232 / V.28 transceiver · 4 · 5 · 120 kbps · +5 V · 4 x 0.1 uF · plus or minus 5 V EIA/TIA-232E · Dual charge pump

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX211ECAI+ تایبەتمەندییەکان

Product Type RS-232 transceiver
Number of Drivers 4 drivers
Number of Receivers 5 receivers
ڤۆڵتیەی دابینکردن +5 V
Maximum Data Rate 120kbps
Driver Output Level ±5 V
ESD Protection ±15kV HBM
Interface Standard EIA/TIA-232E
V-Series Standard V.28
پاکێج 28-pin SSOP
Package Area 40% of the 28-pin SO package area
Power Topology Integrated charge-pump circuitry for single-supply operation
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی MAX211ECAI+ 40% of the 28-pin so package area

ڕێکخستنی پین بۆ MAX211ECAI+ (پاکێجی 40% of the 28-pin so package area). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 40% of the 28-pin so package area بۆ MAX211ECAI+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX211ECAI+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX211ECAI+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Control Console, Data-Acquisition Instrument, Point-of-Sale Terminal Interface, Serial Port Expansion Card, Test and Measurement Front Panel, Legacy Equipment Service Interface.

🏭

Industrial Serial Control Console

The MAX211ECAI+ fits an industrial console that must translate several low-voltage logic signals into RS-232 lines and receive multiple return signals. Its four drivers and five receivers provide more channel capacity than a one-channel transceiver, while the single +5V supply simplifies the interface power architecture. According to the Analog Devices product page, the device supports rates to 120kbps and maintains ±5V EIA/TIA-232E output levels under the specified load. Use it where a compact 28-pin SSOP is preferable to the wider SO package and where the cable, grounding, and connector arrangement support RS-232 rather than long-distance differential signaling.

📟

Data-Acquisition Instrument

The MAX211ECAI+ can connect a data-acquisition instrument or controller to external RS-232 equipment that requires several channels. Four drivers support outbound commands, while five receivers provide additional inbound channels for status, acknowledgments, and measurements. The integrated charge pump allows operation from +5V, avoiding a separate ±12V interface supply, and the 28-pin SSOP preserves PCB area in instrument front ends. According to the manufacturer product page, the interface supports 120kbps data rates and EIA/TIA-232E and V.28 operation. Designers should still account for connector wiring, signal return paths, and the maximum practical cable characteristics of the complete installation.

💳

Point-of-Sale Terminal Interface

The MAX211ECAI+ is suitable for a point-of-sale terminal or peripheral interface that needs multiple legacy RS-232 connections from one compact IC. The four-driver, five-receiver configuration can handle several command or status channels, and the +5V single-supply operation aligns with embedded terminal electronics. According to the Analog Devices product page, the MAX211 family supports data rates to 120kbps and includes ±15kV HBM ESD protection. That protection is useful on externally accessible connectors, although chassis design, isolation, and additional surge protection may be necessary for harsher installation environments.

🖥️

Serial Port Expansion Card

The MAX211ECAI+ can serve as the core of a serial expansion card designed to add several RS-232 ports to an embedded controller. Four drivers and five receivers provide useful channel density, while the 28-pin SSOP occupies 40% of the area of the 28-pin SO package according to the Analog Devices family information. The charge pump derives the required bipolar driver levels from +5V, simplifying the card's supply arrangement. Its 120kbps-class interface performance is suitable for configuration consoles, service ports, and control channels where the physical RS-232 cable length and loading remain within the standard's intended application.

🧪

Test and Measurement Front Panel

The MAX211ECAI+ is useful in test and measurement front panels that must exchange commands and return measurement data over RS-232. Multiple drivers and receivers allow a single interface device to support several connected instruments or a mix of transmit and receive channels. According to the manufacturer product page, the integrated charge pump supports single +5V operation and the interface operates to 120kbps, making it suitable for moderate-speed control traffic. The ±15kV HBM ESD rating adds protection at accessible connector pins, but operators should connect cables with the power system arranged as specified by the complete instrument.

🔧

Legacy Equipment Service Interface

The MAX211ECAI+ can provide a compact service interface for legacy equipment that retains RS-232 connectors but requires an updated embedded controller. Four driver channels and five receiver channels support multiwire command, acknowledgment, and status paths while keeping the host board compact. The manufacturer lists +5V single-supply operation, 120kbps data-rate capability, and integrated ±15kV HBM ESD protection. Use the 28-pin SSOP version when board area is constrained, and verify the complete pin assignment in the manufacturer datasheet because a family-compatible alternative may differ in shutdown or auxiliary control functions.

What is the MAX211ECAI+?
The MAX211ECAI+ is a 4-driver, 5-receiver RS-232 transceiver from Analog Devices in a 28-pin SSOP package. According to the manufacturer product page, it operates from a single +5V supply, supports data rates to 120kbps, and maintains ±5V EIA/TIA-232E output levels when loaded under the specified conditions. Integrated charge-pump circuitry eliminates the need for a separate bipolar ±12V supply.
How many RS-232 drivers and receivers does MAX211ECAI+ have?
The MAX211ECAI+ provides four RS-232 line drivers and five RS-232 line receivers. According to the Analog Devices product page, this 4/5 arrangement supports multi-channel serial equipment without requiring separate transceiver ICs for every line. The extra receiver can accommodate a receive-only connection when the host logic and connector wiring permit that channel assignment.
What is the maximum data rate of MAX211ECAI+?
The MAX211ECAI+ supports data rates to 120kbps when loaded in accordance with EIA/TIA-232E and V.28 requirements. The Analog Devices product page states that the drivers maintain ±5V EIA/TIA-232E output signal levels at rates in excess of 120kbps under the specified loading. Cable length, capacitance, grounding, and signal integrity may still limit the practical rate of a complete RS-232 link.
Does MAX211ECAI+ need external positive and negative voltage rails?
No. The MAX211ECAI+ uses integrated charge-pump circuitry to operate from a single +5V supply. According to the Analog Devices product page, this internal circuitry eliminates the need for a bipolar ±12V supply and enables single-supply operation. Follow the manufacturer datasheet when placing the charge-pump capacitors because their values and connection details are part of the recommended operating configuration.
What ESD protection does MAX211ECAI+ provide?
The MAX211ECAI+ includes integrated high ±15kV HBM ESD protection. The MAX211ECAI datasheet information identifies this as human-body-model protection, so the rating should not be interpreted as immunity to every ESD model or to cable-borne surges. External protection, chassis grounding, and compliant connector design may still be required where the RS-232 port is connected to long or unprotected cables.
Where can I download the MAX211ECAI+ datasheet PDF?
The official MAX211 datasheet and product information are available from Analog Devices at https://www.analog.com/en/products/max211.html. The manufacturer page describes the MAX211 family's electrical operation and package options. Use the MAX211ECAI+ orderable variant information and the MAX211ECAI datasheet when verifying the exact SSOP pin assignments, capacitor connections, electrical limits, and package drawing.
Where can I find the MAX211ECAI+ pinout?
The MAX211ECAI+ pinout is identified in the manufacturer MAX211 datasheet, while the official product page confirms that the family is offered in a 28-pin SSOP package. Use the pin-description table and package drawing for the MAX211ECAI variant when assigning connector signals or laying out the board. This page does not reproduce individual pin numbers because a complete pin-description table is not present in the manufacturer material referenced here.
Can MAX213ECAI+ replace MAX211ECAI+?
The MAX213ECAI+ is the closest same-manufacturer 28-pin SSOP alternative listed for the MAX211ECAI+, but designers should confirm functional pin compatibility in the MAX211 and MAX213 datasheets before production use. According to the Analog Devices MAX211 family information, MAX211 and MAX213 share the 28-pin SSOP format, single +5V operation, and 120kbps-class RS-232 performance. Family-level package similarity alone does not guarantee identical shutdown or control behavior.
Is MAX241EEAI the same as MAX211ECAI+?
The MAX241EEAI is a closely related Maxim RS-232 transceiver in the same 28-pin SSOP family, but it should not be treated as automatically identical to the MAX211ECAI+. The cross-reference data explicitly identifies a comparison between MAX211ECAI+T and MAX241EEAI, while the Analog Devices family information describes MAX211 and MAX213 options. Review the MAX241 data sheet for exact driver, receiver, shutdown, and pin-function differences before substitution.
What is the best drop-in replacement for MAX211ECAI+?
No replacement can be designated unconditionally from the available cross-reference material. The closest candidates are MAX213ECAI+, MAX241EEAI, and MAX211EAI+, all from the same MAX211-family ecosystem and associated with 28-pin SSOP configurations. According to the manufacturer family information, they share key RS-232 capabilities, but exact pin functions, temperature grade, and shutdown behavior must be checked in each part's datasheet before treating any candidate as a production drop-in.
When should I choose MAX211ECAI+ over MAX213ECAI+?
Choose MAX211ECAI+ when its established four-driver, five-receiver configuration and pin functions match the existing board, particularly where the MAX211 family is already qualified. Choose MAX213ECAI+ only after verifying its family-specific control or shutdown behavior against the target design. The Analog Devices family page confirms shared SSOP availability and 120kbps-class operation, but package similarity does not remove the need for a pin-by-pin review.
Is MAX211ECAI+ suitable for industrial control and instrumentation?
The MAX211ECAI+ is architecturally suitable for RS-232 links in industrial controls, data-acquisition systems, and instrumentation because it combines four drivers, five receivers, a single +5V supply, and ±15kV HBM ESD protection. According to the manufacturer product page, its drivers meet EIA/TIA-232E and V.28 requirements to 120kbps. Confirm the exact operating-temperature limits and system-level ESD requirements before deployment.
Where can I buy MAX211ECAI+ and check current price?
Use the Request a Quote form on this page to request the current MAX211ECAI+ quotation, availability, and lead time from XAIPART. The MAX211ECAI+ is listed as obsolete in cross-reference information, so lifecycle status and possible last-time-buy handling should be confirmed during quotation. This page intentionally does not publish a static price figure that could become stale or conflict with the live quotation.
What is the lead time for obsolete MAX211ECAI+ parts?
The current lead time for MAX211ECAI+ must be confirmed through the Request a Quote form on this page because the product is identified as obsolete and no fixed lead-time schedule applies to every procurement scenario. Request the exact suffix, package, quantity, and any required traceability documentation. The request should also identify whether the quotation requires new surplus, last-time-buy, or another authorized supply condition.
Is MAX211ECAI+ currently in stock?
Stock status for the obsolete MAX211ECAI+ should be requested through the Request a Quote form on this page. The manufacturer family information confirms the part's RS-232 functionality and package family, while the cross-reference information identifies the target as obsolete. Because obsolete inventory can change quickly, request the current lot availability and traceability rather than relying on a static stock statement.
What are the key specifications of MAX211ECAI+ that engineers should know?
The MAX211ECAI+ is a 28-pin SSOP RS-232 transceiver with four drivers, five receivers, a single +5V supply, and operation to 120kbps. According to the Analog Devices product page, it maintains ±5V EIA/TIA-232E output levels, supports V.28 operation, and includes integrated ±15kV HBM ESD protection. Its charge pump removes the need for a separate bipolar supply, while the SSOP saves board area versus the wider SO option.

داتای سەرچاوەی ئەندازیاری بۆ MAX211ECAI+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX211ECAI+ when maintaining an existing 28-pin SSOP design that requires four RS-232 drivers, five receivers, a single +5V supply, and 120kbps-class operation. It is particularly useful where board area is constrained because the SSOP occupies only 40% of the 28-pin SO package area. MAX211EAI+ is the closest same-family candidate when its temperature grade and exact pin functions match the original requirement. Consider MAX213ECAI+ when its family-specific shutdown or control behavior provides a useful improvement, but verify every connected pin before substituting it. MAX241EEAI is another close 28-pin SSOP option, yet its auxiliary functions must also be checked against the target design. None of these alternatives should be treated as an automatic replacement solely because the package and headline RS-232 specifications match.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX213ECAI+ MAX241EEAI MAX211EAI+
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Number of Drivers 4 drivers 4 drivers 4 drivers 4 drivers
Number of Receivers 5 receivers 5 receivers 5 receivers 5 receivers
Supply Voltage +5 V +5 V +5 V +5 V
Maximum Data Rate 120kbps 120kbps 120kbps 120kbps
ESD Protection ±15kV HBM ±15kV HBM ±15kV HBM ±15kV HBM
Power Topology Integrated charge pump with single +5V operation Integrated charge pump with single +5V operation Integrated charge pump with single +5V operation Integrated charge pump with single +5V operation

جیاکەرەوە سەرەکییەکان

  • Combines four drivers and five receivers with single-supply operation (بەراورد بەMAX211EAI+)
  • Maintains ±5 V EIA/TIA-232E output levels at 120kbps-class data rates (بەراورد بەMAX213ECAI+)
  • Uses the compact 28-pin SSOP rather than the wider SO package (بەراورد بەMAX241EEAI)

تێبینییەکانی دیزاین

Place the charge-pump capacitors directly between their designated IC pins using short traces, and follow the manufacturer layout artwork rather than improvising a longer capacitor path. Keep the RS-232 driver and receiver routes away from crystal, ADC, reference, and other high-impedance analog nodes. The 28-pin SSOP footprint offers a compact solution, but its fine lead pitch requires controlled solder mask and adequate ground return routing.

Do not treat package equivalence as proof that every MAX211-family substitute is functionally identical. MAX213ECAI+, MAX241EEAI, and MAX211EAI+ are the closest identified 28-pin SSOP candidates, but shutdown, control, temperature-grade, and pin-function differences may affect a replacement. Compare every connected pin with the MAX211ECAI+ datasheet before releasing a PCB revision or placing an order.

RS-232 signals can radiate when connected to external cables. Route each driver and receiver line directly toward its connector, use a continuous ground reference where the interface requires one, and avoid creating large loops between the board and enclosure. The integrated ±15kV HBM protection helps at the IC pin level, but cable length, common-mode voltage, chassis grounding, and connector construction still determine system-level electrostatic and EMI performance.

Power the MAX211ECAI+ from a stable +5V rail and place local high-frequency bypass capacitance near the supply pins. Follow the manufacturer recommendations for bulk and charge-pump capacitors, including their voltage and tolerance characteristics. Although the device generates bipolar RS-232 levels internally, regulator noise, input ripple, and inadequate return paths can degrade signal integrity and should be checked with the complete interface circuit.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer material referenced for this product does not state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. EIA/TIA-232E, V.28, and ±15kV HBM ESD are interface and ESD specifications rather than material-compliance certifications.

داتا پشتڕاستکراوەتەوە لە: 2026-11-02 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX211ECAI+ datasheet MAX211ECAI+ pinout MAX211ECAI+ datasheet pdf MAX211ECAI+ equivalent MAX211ECAI+ replacement MAX211ECAI+ cross reference MAX211ECAI+ price MAX211ECAI+ stock Analog Devices MAX211ECAI+ MAX211ECAI+ SSOP footprint MAX211ECAI+ application circuit MAX211ECAI+ vs MAX213ECAI+ MAX211 4 driver 5 receiver MAX211ECAI+ 120kbps

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices MAX211ECAI+ MAX211 MAX211EAI+ MAX213ECAI+ MAX241EEAI RS-232 transceiver line driver line receiver interface IC semiconductor EIA/TIA-232E V.28 single +5V supply charge-pump circuitry 120kbps data rate ±15kV HBM ESD protection 28-pin SSOP SSOP family surface mount industrial control data acquisition serial port expansion
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ