MAX232EESE+T - 120kbps ESD RS-232 Transceiver | Analog Devices
MPN: MAX232EESE+T ✓ چالاکMAX232EESE+T گشتی
An RS-232 transceiver is an interface IC that converts between digital logic signals and the voltage-defined, unbalanced signaling used by RS-232 equipment. The MAX232E belongs to the line-driver and receiver hierarchy, combines two signal channels in one package, and is designed for EIA/TIA-232E and CCITT V.28 communication links where ±12 V is unavailable.
Key features include two transmit channels, two receive channels, full-duplex RS-232 operation, and operation at data rates up to 120 kbps. The integrated charge pump eliminates the need for an external ±12 V supply, while ±15 kV human-body-model ESD protection improves robustness on connectors and cables that may be exposed to electrostatic discharge. The E-suffix device is supplied in a 16-pin SOIC package for surface-mount assembly.
Internally, the transmit drivers use the charge-pump-generated rails to produce RS-232-compatible output levels from TTL or CMOS-compatible inputs. The receive channels detect RS-232 logic levels and translate them into logic-compatible signals for the host or controller. Because the device supports both directions in one package, it is suitable for point-to-point links requiring simultaneous transmission and reception, subject to the signaling and grounding requirements of the connected equipment.
Typical applications include industrial serial ports, data-acquisition equipment, instrumentation, barcode and identification systems, and embedded control systems using legacy RS-232 equipment. The device is particularly useful where a modern controller must communicate with an RS-232 printer, test instrument, modem, or service interface while retaining protection at the externally accessible connector.
Designers should follow the manufacturer’s recommended charge-pump capacitor and logic-side bypass-capacitor recommendations. Keep the protected connector-side traces away from sensitive logic, provide a low-impedance ground path between communicating systems, and verify that the selected transceiver, wiring, and enclosure address the required ESD and isolation strategy for the installation.
This page combines the MAX232EESE+T interface specifications, package and lifecycle information, qualified drop-in alternatives, and practical RS-232 design guidance. It also distinguishes exact drop-in choices from functional alternatives so engineers can assess footprint, speed, protection, and qualification before approving a replacement.
جێگرەوەکانی جێگۆڕکێ بۆ MAX232EESE+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX232EESE+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Interface Standard, ESD Protection, Supply Voltage.
MAX232ESE+T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX232ECSE+T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX232EWE+T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX232ECDWR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX232EESE+T تایبەتمەندییەکان
| Product Type | RS-232 transceiver |
| Transmitter Channels | 2 |
| Receiver Channels | 2 |
| Duplex Mode | Full duplex |
| خێرایی داتا | Up to 120 kbps |
| ڤۆڵتیەی دابینکردن | +5 V |
| ESD Protection | ±15 kV human body model |
| Standards Compatibility | EIA/TIA-232E and CCITT V.28 |
| Interface Protocol | RS-232 |
| پاکێج | 16-pin SOIC, 3.90 mm width |
| جۆری دامەزراندن | Surface mount |
| دۆخی RoHS | ROHS3 compliant |
| REACH Status | Unaffected |
| Moisture Sensitivity Level | MSL 1 (unlimited floor life) |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی MAX232EESE+T 16-pin soic, 3.90 mm width
ڕێکخستنی پین بۆ MAX232EESE+T (پاکێجی 16-pin soic, 3.90 mm width). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX232EESE+T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX232EESE+T گونجاوە بۆ 6 بەکارھێنانs: Industrial Instrument Serial Port, Data Acquisition Equipment, Barcode and Identification Terminal, Embedded Service Console, Point-to-Point Communication Link, Legacy Printer Interface.
Industrial Instrument Serial Port
The MAX232EESE+T is well suited to connecting a controller or embedded system to legacy RS-232 test and measurement equipment. Its two drivers and two receivers support full-duplex communication, while the integrated charge pump allows operation from a single +5 V supply without an external ±12 V rail. The 120 kbps maximum data rate covers many legacy serial ports and low-to-moderate-speed service interfaces. Its ±15 kV human-body-model ESD protection is valuable at an externally accessible connector, although installation-level grounding and enclosure practices remain necessary. Designers should use the manufacturer’s charge-pump capacitor recommendations, place bypass capacitors close to the device, and confirm the remote equipment’s logic levels, handshaking method, and signal-ground requirements.
پێشنیارکراو
Data Acquisition Equipment
The MAX232EESE+T can bridge a modern control board to an RS-232 data-acquisition unit when both transmit and receive paths are required. Two full-duplex channels reduce the number of interface packages compared with separate single-channel line devices, while operation from +5 V simplifies system power design. Its 120 kbps rate supports many legacy measurement-control protocols without imposing a baud rate above the specified limit. The ±15 kV HBM protection rating helps reduce sensitivity to electrostatic discharge at an external cable connection. For reliable acquisition, use a continuous signal-reference ground, minimize cable-stub length, keep the charge-pump network compact, and verify the data-acquisition unit’s use of RS-232 control lines such as request-to-send and data-terminal-ready.
پێشنیارکراو
Barcode and Identification Terminal
A barcode scanner, RFID controller, or identification terminal can use the MAX232EESE+T to interface a compact embedded controller with an RS-232 reader. The two transmit and two receive channels provide flexible point-to-point connectivity, and the +5 V supply requirement permits integration with common embedded logic rails. The 120 kbps maximum rate is sufficient for many legacy readers and identification devices. ESD protection is especially relevant where the cable connector is exposed to human contact or maintenance activity, making the device’s ±15 kV HBM rating a meaningful robustness benefit. Confirm the scanner’s RS-232 voltage levels, connector pin arrangement, flow-control requirements, and grounding before installation; the MAX232EESE+T handles line signaling but does not replace any isolation required by the system architecture.
پێشنیارکراو
Embedded Service Console
The MAX232EESE+T is appropriate for an embedded service console that must communicate with an RS-232 configuration port on equipment such as a printer, controller, or legacy peripheral. A single +5 V rail is especially convenient for compact systems, and the integrated charge pump avoids a separate bipolar power supply. Full-duplex operation enables simultaneous command transmission and response reception, while a maximum rate of 120 kbps accommodates conventional service-port baud rates. The ±15 kV HBM protection rating improves tolerance at a connector exposed during installation or servicing. The design should include the manufacturer-recommended charge-pump capacitors, local supply bypassing, and a defined chassis or signal-ground strategy. Software must also match the peripheral’s handshake and connector protocol rather than assuming that all RS-232 ports use the same pin assignments.
پێشنیارکراو
Point-to-Point Communication Link
The MAX232EESE+T supports a compact point-to-point RS-232 link between two systems that require both command and response traffic. Two transmitters and two receivers provide the standard full-duplex channel arrangement, and the 120 kbps limit covers many short-distance control links. Running from +5 V with an internal charge pump reduces external power-tree complexity compared with discrete RS-232 drivers requiring separate positive and negative rails. Its ±15 kV HBM protection is useful where either connector may be touched during installation. For a reliable link, match the baud rate, parity, and data framing on both endpoints, connect signal grounds according to the equipment architecture, and route the driver-side lines away from sensitive analog or high-speed digital nodes. Longer cables or electrically noisy environments may require isolation or surge protection beyond the IC’s ESD rating.
پێشنیارکراو
Legacy Printer Interface
The MAX232EESE+T can provide the electrical interface between a modern embedded controller and a legacy RS-232 printer in an industrial or laboratory system. The 16-pin SOIC package is convenient for automated board assembly, while the integrated charge pump permits a single +5 V system supply and eliminates an external ±12 V converter. Its 120 kbps maximum rate is adequate for many printer command and status transfers. The ±15 kV HBM protection rating helps manage electrostatic discharge at the printer cable connector, where cables may be repeatedly connected. Verify the printer’s connector signal assignments and handshake lines, use the manufacturer’s prescribed charge-pump capacitor values, and keep the RS-232 traces short and away from switching-node copper. If the printer shares a noisy industrial ground, an isolated interface may be preferable to relying on the MAX232EESE+T alone.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX232EESE+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX232ESE+T | MAX232ECSE+T | MAX232EWE+T | MAX232ECDWR |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-SOIC | 16-SOIC | 16-pin narrow SOIC | 16-SOIC | 16-SOIC |
| Transmitter Channels | 2 | 2 | 2 | 2 | 2 |
| Receiver Channels | 2 | 2 | 2 | 2 | 2 |
| Duplex Mode | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex |
| Maximum Data Rate | 120 kbps | 120 kbps | 120 kbps | 120 kbps | 120 kbps |
| Supply | +5 V | +5 V | +5 V | +5 V | +5 V |
| Protocol | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
جیاکەرەوە سەرەکییەکان
- Enhanced connector-side ESD protection (بەراورد بەMAX232ESE+T)
- Single-supply full-duplex integration (بەراورد بەMAX232ECDWR)
- Same 16-SOIC footprint with protected RS-232 operation (بەراورد بەMAX232ECSE+T)
تێبینییەکانی دیزاین
Place the charge-pump capacitors exactly as shown in the manufacturer’s recommended application circuit and keep their connections short. Add the specified local supply bypassing at the +5 V and ground pins, and route return current directly to the device ground rather than through connector-current paths. The charge pump generates the bipolar voltage required by the drivers, so unstable or poorly decoupled supply current can appear as output noise, startup failure, or unstable communications.
Keep RS-232 driver outputs away from logic inputs, crystal circuits, ADC front ends, and other sensitive analog nodes. Use the connector-side ground return as a deliberate signal-reference path, and avoid sharing narrow copper sections with motors, relays, or switching supplies. Although the MAX232EESE+T includes ±15 kV HBM ESD protection, that rating does not eliminate external surge currents or poor ground geometry.
Do not treat the MAX232EESE+T as a UART or assume that it converts protocol framing. The device only translates logic levels into RS-232 driver outputs and receive inputs; baud rate, parity, data bits, flow control, and command protocol must match the connected equipment. Also verify the exact connector pinout because RS-232 equipment does not use one universal connector assignment.
زانیاری پابەندبوون
The product is described as ROHS3 compliant and REACH unaffected. AEC-Q100 qualification is not indicated for this RS-232 interface IC, while lead-free, halogen-free, and conflict-minerals status remain unknown.