MAX3232EEUE+T - 1Mbps ESD RS-232 Transceiver | Analog Devices
MPN: MAX3232EEUE+T ✓ چالاکMAX3232EEUE+T گشتی
An RS-232 transceiver is an interface IC that converts logic-level signals from a UART, microcontroller, or embedded controller into RS-232 line levels and converts received RS-232 signals back into logic levels. The MAX3232 belongs to the RS-232 interface hierarchy, which includes transceiver, line-driver, and line-receiver functions used to bridge modern digital logic with legacy serial-port equipment.
The MAX3232EEUE+T provides two transmit channels and two receive channels in one package. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V systems, while its capability of 1 Mbps exceeds the 250 kbps rate stated for the Texas Instruments MAX3232E interface family. ±15 kV ESD protection improves robustness at externally accessible serial connectors, and the device supports low-power operation for battery-powered instruments.
Internally, a dual charge-pump circuit generates the positive and negative voltage levels required by true RS-232 transmitters. The MAX3232 family uses four small external 0.1 µF capacitors, reducing board area compared with implementations requiring larger bulk capacitors. The MAX3232E family is also described by the manufacturer as pin-, package-, and functionally compatible with the industry-standard MAX232, subject to the exact package and ordering variant selected.
Typical applications include industrial control links, point-of-sale equipment, data-acquisition systems, instrumentation, embedded service interfaces, and legacy peripheral connections. The two-driver, two-receiver configuration is particularly useful for bidirectional console links where one side transmits while the other receives, including designs that require loopback or crossed TX-to-RX connections.
For PCB implementation, place the four 0.1 µF charge-pump capacitors close to their designated pins and route each TX and RX trace away from sensitive analog circuitry. Confirm the connector-side transient protection and grounding strategy because the internal ±15 kV ESD rating does not replace a correctly designed external protection network for every cable length or installation environment.
This product guide combines the manufacturer specifications with package-level implementation guidance, application-specific use cases, and a same-footprint comparison of relevant RS-232 transceivers. It also identifies the electrical and qualification details that should be checked before replacing an existing MAX3232E design.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3232EEUE+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3232EEUE+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, ESD Protection, Maximum Data Rate, Supply Voltage Range.
MAX3232ECUE+T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232CUE+T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232CAE+T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232ECTE+T
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232IPWR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232EIDW
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3232EEUE+T تایبەتمەندییەکان
| Product Type | Dual RS-232 transceiver |
| Number of Drivers | 2 channels |
| Number of Receivers | 2 channels |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| ESD Protection | ±15 kV |
| Low-Power Shutdown Supply Current | 10 nA |
| Charge-Pump Capacitor Count | 4 capacitors |
| Charge-Pump Capacitor Value | 0.1 µF each |
| پاکێج | 16-pin TSSOP |
| Package Pin Count | 16 pins |
| جۆری دامەزراندن | Surface mount |
| Ordering Configuration | +T tape-and-reel configuration |
| Interface Standard | TIA/EIA-232-F |
ڕێکخستنی پینی MAX3232EEUE+T
| پین 1 | C1+ — Charge-pump capacitor C1 positive terminal |
| پین 2 | V- — Negative charge-pump voltage output |
| پین 3 | C1- — Charge-pump capacitor C1 negative terminal |
| پین 4 | C2+ — Charge-pump capacitor C2 positive terminal |
| پین 5 | C2- — Charge-pump capacitor C2 negative terminal |
| پین 6 | V+ — Positive charge-pump voltage output |
| پین 7 | R1OUT — Receiver 1 logic output |
| پین 8 | R2OUT — Receiver 2 logic output |
| پین 9 | R2IN — Receiver 2 RS-232 input |
| پین 10 | R1IN — Receiver 1 RS-232 input |
| پین 11 | T1IN — Driver 1 logic input |
| پین 12 | T2IN — Driver 2 logic input |
| پین 13 | T2OUT — Driver 2 RS-232 output |
| پین 14 | T1OUT — Driver 1 RS-232 output |
| پین 15 | GND — Ground |
| پین 16 | VCC — Positive supply input |
بەکارهێنانە باوەکان
MAX3232EEUE+T گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Console, Point-of-Sale Terminal, Data-Acquisition Instrument, Embedded Service Interface, Instrumentation and Test Equipment, Portable Serial Peripheral.
Industrial Control Console
The MAX3232EEUE+T fits an industrial controller or service terminal that requires a compact two-channel RS-232 connection. Its two drivers and two receivers allow bidirectional console traffic without adding separate interface packages, while the 3.0 V to 5.5 V operating range accommodates 3.3 V control logic and 5 V peripheral logic. The stated 1 Mbps capability provides substantial UART timing margin. A 16-pin TSSOP footprint simplifies routing between the controller, connector, and protection network. For an industrial enclosure, verify the exact temperature grade, add connector-side surge protection, and keep the RS-232 traces away from switching-power nodes.
پێشنیارکراو
Point-of-Sale Terminal
The MAX3232EEUE+T can connect a point-of-sale terminal, receipt printer, or customer-display accessory that retains an RS-232 port. The dual-driver, dual-receiver arrangement supports two full-duplex paths while the 3.0 V to 5.5 V supply range allows operation from either 3.3 V or 5 V system rails. Its 1 Mbps rating exceeds common retail peripheral baud rates, leaving additional timing margin for protocol overhead. The four 0.1 µF charge-pump capacitors support a compact layout, but connector routing and ground returns remain critical for reliable communication in environments with cash-drawer motors, scanners, and switching regulators.
پێشنیارکراو
Data-Acquisition Instrument
The MAX3232EEUE+T is useful for laboratory and industrial data-acquisition equipment that must exchange configuration commands and measurement data with a host computer. Its 1 Mbps maximum rate supports high-volume command traffic, while the 10 nA shutdown supply current helps conserve power when the instrument is idle. The two receiver channels can accept status information from more than one peripheral, and the two drivers support outbound commands and acknowledgements. For measurement accuracy, place the transceiver and charge-pump capacitors away from analog inputs and reference circuitry, use a solid ground plane, and apply the manufacturer layout recommendations when the RS-232 connector is cable-connected.
پێشنیارکراو
Embedded Service Interface
The MAX3232EEUE+T is appropriate for an embedded controller that exposes a service, configuration, or upgrade port through a DB9 or equivalent RS-232 connector. Two transmitters and two receivers permit host-to-device commands and device-to-host responses on the same board, and the low-power shutdown mode can disconnect the interface when it is not used. Its 1 Mbps capability supports rapid transfers, although security layers in the host protocol should control command authorization. The 16-pin TSSOP package fits close to the connector, but place transient-protection components at the connector entry and keep the protected traces separated from sensitive internal circuitry.
پێشنیارکراو
Instrumentation and Test Equipment
The MAX3232EEUE+T can bridge a UART-based controller to legacy RS-232 test equipment. The device's 1 Mbps capability provides useful margin over the 250 kbps maximum identified for the MAX3232IPWR alternative, allowing either to satisfy many legacy instruments while the target supports faster communications. Its 3.0 V minimum supply supports 3.3 V test systems, and the 10 nA shutdown current is beneficial in portable instruments. Keep the interface away from high-voltage switching nodes, use a defined equipment-ground strategy, and ensure the transceiver's ESD protection is supplemented by appropriately rated components at an exposed connector.
پێشنیارکراو
Portable Serial Peripheral
The MAX3232EEUE+T supports portable and battery-powered peripheral designs that include a wired RS-232 service or communication port. Its 3.0 V to 5.5 V range operates directly from common portable-system rails, while the 10 nA shutdown current reduces standby demand when the serial interface is inactive. The 1 Mbps rating permits faster command and firmware-transfer modes than the 250 kbps MAX3232IPWR. Designers should still account for the connector's insertion, cable, and ESD exposure, provide a controlled ground path, and place the four 0.1 µF charge-pump capacitors close to the device according to the manufacturer layout.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3232EEUE+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3232ECUE+T | MAX3232CUE+T | MAX3232CAE+T | MAX3232ECTE+T | MAX3232IPWR |
|---|---|---|---|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Ordering Format | +T tape-and-reel configuration | +T tape-and-reel configuration | +T tape-and-reel configuration | +T tape-and-reel configuration | +T tape-and-reel configuration | +T tape-and-reel configuration |
جیاکەرەوە سەرەکییەکان
- Higher stated serial data rate (بەراورد بەMAX3232IPWR)
- Enhanced ESD protection (بەراورد بەMAX3232CUE+T)
- Low shutdown supply current (بەراورد بەMAX3232IPWR)
- Same-footprint service-interface scaling (بەراورد بەMAX3232CAE+T)
تێبینییەکانی دیزاین
Place the four 0.1 µF charge-pump capacitors close to C1+, C1−, C2+, and C2−, using the shortest practical traces. Keep the high-voltage charge-pump node V− away from receiver inputs and sensitive analog circuits. The MAX3232E data sheet states that the device uses four small 0.1 µF capacitors, so omitting or relocating them can increase charge-pump stress and reduce interface reliability.
Do not assume every MAX3232-family suffix is electrically or mechanically identical. Confirm the exact driver and receiver count, package drawing, temperature grade, ESD rating, supply range, and shutdown behavior before substituting a part into an existing board. Although the listed alternatives use a 16-pin TSSOP footprint, a package match alone does not establish that the operating limits and lifecycle requirements are equivalent.
Route TX and RX traces away from switching-regulator inductors, high-current power paths, and clock or sensor inputs. Preserve a continuous ground reference beneath the interface, terminate the TX path in the data sheet's recommended network, and avoid long unprotected stubs from the transceiver to the connector. The integrated ±15 kV ESD protection helps at the interface pins but does not replace a deliberate connector-side protection and grounding strategy.
Decouple VCC close to pin 16 with the recommended local bypass capacitor and keep the return connection to pin 15 short. Estimate the average transceiver load before assigning the system rail budget, and treat the 10 nA figure as the shutdown-state value rather than the active operating current. Check the manufacturer operating-current table for the actual supply demand under the intended data rate and channel activity.
زانیاری پابەندبوون
The MAX3232E product family and the Analog Devices product page are listed as production. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified and therefore remain unknown.