MAX3483CSA+T - 3.3V RS-485 Transceiver | Analog Devices
MPN: MAX3483CSA+T ✓ چالاکMAX3483CSA+T گشتی
An RS-485/RS-422 transceiver is a physical-layer interface IC that converts logic-level data into differential bus signals and reconstructs logic-level data from differential inputs. The MAX3483 combines a balanced line driver, differential receiver, and 3.3 V power rail in one package. This places it in the interface IC hierarchy alongside bus transceivers, differential line drivers, and differential receivers while providing a compact solution for multidrop industrial buses.
The device operates from a single 3.3 V supply and supports 3.0 V to 3.6 V operation. Its slew-rate-limited driver lowers the edge rate of transmitted signals, reducing EMI and reflections that can interfere with slow or poorly terminated cables. The manufacturer identifies the MAX3483 family for data rates up to 250 kbps when its slew-rate-limited operation is used to suppress cable reflections. Analog Devices also describes the MAX3483 as a 10 Mbps RS-485/RS-422 transceiver.
The MAX3483CSA+T includes one transmit driver and one receive channel, allowing it to serve as a bus node in point-to-point or multidrop RS-485 networks. Its low-power design is useful in portable test equipment, industrial controllers, and distributed sensors. The separate driver-disable and receiver-enable controls support half-duplex communication and allow the receive path to be disabled when the node is not listening.
Typical applications include industrial automation, RS-485 instrumentation, building-control equipment, data acquisition, and communications equipment operating from a 3.3 V rail. The slew-rate-limited driver is particularly appropriate where long cables, imperfect terminations, or adjacent high-speed circuitry could produce reflected or spurious signals.
When designing the circuit, route the differential bus as a controlled-impedance pair, provide the termination and biasing required by the selected network topology, and keep the ground return close to the signal path. Confirm that the required baud rate, cable length, topology, and termination strategy are compatible with slew-rate-limited signaling before releasing the PCB layout.
This page combines manufacturer specifications, package and lifecycle information, practical RS-485 design guidance, and a focused comparison of documented MAX3483 variants. These engineering details help buyers evaluate the transceiver's voltage, data-rate, package, and ESD-related options before integrating it into a new design.
جێگرەوەکانی جێگۆڕکێ بۆ MAX3483CSA+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3483CSA+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Maximum Data Rate, Package, Driver Architecture.
MAX3483ECSA+T
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3483ESA+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX3483CSA+T تایبەتمەندییەکان
| Product Type | RS-485/RS-422 transceiver |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| Operating Supply Range | 3.0 V to 3.6 V |
| Maximum Data Rate | 10 Mbps |
| Slew-Rate-Limited Data Rate | Up to 250 kbps |
| Driver Count | 1 |
| Receiver Count | 1 |
| Supported Standards | RS-485 and RS-422 |
| Driver Architecture | Slew-rate-limited differential driver |
| Receiver Architecture | Differential receiver |
| پاکێج | 8-pin SOIC |
| Package Designation | NSOIC-8 |
| جۆری دامەزراندن | Surface mount |
| Production Status | Production |
| Power Classification | Low-power transceiver |
ڕێنمایی ڕێکخستنی پینی MAX3483CSA+T nsoic-8
ڕێکخستنی پین بۆ MAX3483CSA+T (پاکێجی nsoic-8). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3483CSA+T.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX3483CSA+T گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation RS-485 Bus, RS-422 Point-to-Point Communications, Data Acquisition Equipment, Building Control Equipment, Portable Test and Measurement Instruments, Industrial Sensor and Gateway Equipment.
Industrial Automation RS-485 Bus
The MAX3483CSA+T fits distributed industrial nodes that exchange control and sensor data over a 3.3 V RS-485 bus. Its single differential driver and receiver provide the basic physical-layer functions required for point-to-point or multidrop links, while the 3.0 V to 3.6 V operating range supports modern low-voltage controller boards. The slew-rate-limited driver is particularly useful where cables are imperfectly terminated, because it reduces EMI and reflections. System integrators should confirm that the selected baud rate remains compatible with the network length and termination strategy before deployment.
پێشنیارکراو
RS-422 Point-to-Point Communications
The MAX3483CSA+T can implement a 3.3 V point-to-point RS-422 link when a system requires balanced differential transmission rather than a multidrop RS-485 topology. One transmitter drives the differential pair while the complementary receiver converts the remote signal into a logic-level output. The 8-pin SOIC package keeps the interface compact, and the manufacturer identifies the MAX3483 family for data rates up to 10 Mbps. Designers should preserve the differential trace geometry, provide a ground reference, and validate the remote receiver's threshold compatibility.
پێشنیارکراو
Data Acquisition Equipment
The MAX3483CSA+T is appropriate for a compact data-acquisition module that connects a controller or host to remote analog and digital measurement equipment over RS-485. Its one-driver/one-receiver arrangement supports a multidrop measurement bus, while operation from a 3.3 V supply aligns with low-power embedded instrumentation. Slew-rate-limited signaling can reduce reflections in field-wired networks with imperfect terminations. Use controlled-impedance routing and define termination and fail-safe biasing at the network level so that idle bus states remain interpretable by every receiver.
پێشنیارکراو
Building Control Equipment
The MAX3483CSA+T can connect thermostats, controllers, sensors, and gateways in a low-voltage building-control network. Its compact 8-pin SOIC package suits distributed equipment, while the 3.0 V to 3.6 V supply range supports 3.3 V embedded systems. The slew-rate-limited driver helps limit fast-edge energy on cables running between rooms or control panels, where imperfect terminations are common. For reliable deployment, maintain a continuous reference ground, protect exposed ports against electrostatic discharge, and verify communication margins under the longest permitted cable length.
پێشنیارکراو
Portable Test and Measurement Instruments
The MAX3483CSA+T suits portable instruments that use a 3.3 V controller and a short differential cable to exchange commands or measurement data. The low-power, low-voltage interface avoids requiring a separate 5 V transceiver rail, while the 8-pin SOIC package leaves board area for analog and display circuitry. Slew-rate-limited transmission can improve compatibility with modest cables and connectorized test leads. Place the transceiver near the connector, route the differential pair away from sensitive analog nodes, and add appropriate electrostatic-discharge protection when users can touch the cable or instrument housing.
پێشنیارکراو
Industrial Sensor and Gateway Equipment
The MAX3483CSA+T is useful in remote sensor nodes and gateways that bridge an RS-485 field bus to embedded electronics. One differential driver supports bus transmission and one differential receiver handles incoming data, while the 3.3 V supply range matches many sensor-controller platforms. Because field cables can act as antennas, the slew-rate-limited driver reduces EMI compared with unrestricted high-edge-rate signaling. The design should include bus termination only at designated endpoints, avoid excessive stub lengths, and select biasing so that an unconnected or undriven bus reaches a valid recessive state.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX3483CSA+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX3483ECSA+T | MAX3483ESA |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Supply Voltage | 3.0 V to 3.6 V | 3.3 V | 3.3 V |
| Driver and Receiver Count | 1 driver, 1 receiver | 1 driver, 1 receiver | 1 driver, 1 receiver |
| Driver Edge Control | Slew-rate limited | Slew-rate limited | Slew-rate limited |
جیاکەرەوە سەرەکییەکان
- Focused 3.3 V single-channel interface (بەراورد بەMAX3490EESA+)
- ESD-enhanced family option (بەراورد بەMAX3483CSA+T)
- Slew-rate-limited signal control (بەراورد بەMAX3483ESA)
تێبینییەکانی دیزاین
Route DI, RO, /RE, DE, and the differential bus connections according to the Analog Devices MAX3483 family datasheet pin description. Keep the driver and receiver ground connection close to the device, provide a continuous ground plane beneath the transceiver, and place the bypass capacitor at the supply pins. A differential pair should remain tightly coupled with consistent geometry and should not be routed over noisy switching nodes.
Treat bus topology, cable length, baud rate, termination, and stub length as one system-level design. The MAX3483's slew-rate-limited driver reduces EMI and reflections, with the manufacturer describing error-free transmission up to 250 kbps for this operating mode. Terminate the differential pair only at the physical endpoints of the main bus and avoid long stubs, because unnecessary loading can reduce noise margin or produce reflected transitions.
Do not assume that an 8-pin SOIC package alone proves replacement compatibility. Check driver-disable and receiver-enable polarity, receiver thresholds, fail-safe behavior, ESD rating, operating-temperature grade, and the exact ordering suffix. The MAX3483ECSA+T adds ±15 kV ESD protection, making it preferable for exposed field cabling when that additional protection is required.
زانیاری پابەندبوون
The manufacturer identifies MAX3483 as a production device. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the applicable product documentation or declaration.