Analog Devices

MAX3483EESA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MPN: MAX3483EESA+ ✓ چالاک
3.0V to 3.6V Vdss RS-422 and RS-485 Rds(on) 8-pin SOIC Package
MOQ: 1 |

MAX3483EESA+ گشتی

The Analog Devices MAX3483EESA+ is a 3.3V-powered, half-duplex RS-485/RS-422 transceiver with one driver and one receiver, a maximum data rate of 12Mbps, ±15kV ESD protection, and an 8-pin SOIC package. It is designed for bidirectional serial communication over industrial, instrumentation, and control-system cables while operating from a 3.0V to 3.6V supply.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level digital signals into balanced differential line signals and receives those signals back as differential inputs. The MAX3483EESA+ belongs to the broader transceiver and interface-IC hierarchy, where differential signaling improves noise immunity and permits reliable communication over longer cables than single-ended interfaces.

The principal features include slew-rate-limited transmitter operation, ±15kV ESD protection, a 12Mbps maximum data rate, and support for both RS-485 and RS-422 networks. Slew-rate limiting reduces high-frequency harmonics and can help limit reflections on improperly terminated cables. The single-driver, single-receiver arrangement supports point-to-point links, multidrop RS-485 networks, and RS-422 communication where compatible system signaling is required.

This device operates from a 3.3V supply and is intended for low-power industrial and embedded systems. Its 8-pin SOIC package supports conventional surface-mount assembly and keeps the interface compact. Unlike an RS-232 transceiver, the MAX3483EESA+ uses balanced differential signaling, allowing the same device family to serve RS-485 and RS-422 interfaces where the network topology and termination arrangement meet the relevant interface requirements.

Typical applications include industrial sensor networks, factory automation equipment, building-control nodes, instrumentation, and embedded data links. The 12Mbps capability supports faster data transfer than low-speed isolated transceivers, while slew-rate control favors EMI reduction. RS-485 multidrop networks still require correct bus topology, termination at the physical ends, and suitable common-mode margins for the installed cable and grounding arrangement.

When designing the board, place the transceiver close to the connector and route the differential pair as a controlled-impedance pair. Keep the ground reference close to the cable, provide decoupling at the supply pins, and verify the receive thresholds under worst-case noise and common-mode conditions. Do not assume that the 12Mbps headline rate guarantees reliable operation over long cables; cable length, topology, termination, and transceiver capability determine the practical limit.

This product page combines the manufacturer’s device description with application-oriented design guidance, package details, lifecycle information, and clearly qualified drop-in alternatives. It supports faster part selection by separating electrical function, network compatibility, ESD protection, speed, and board-level implementation considerations before a design is committed to production.

جێگرەوەکانی جێگۆڕکێ بۆ MAX3483EESA+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3483EESA+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Maximum Data Rate, ESD Protection, Transceiver Configuration, Package, Supported Standards.

Analog Devices
Maximum Data Rate: 20 Mbps
ESD Protection: ±20 kV
بەراوردکردن لەگەڵ MAX3483EESA+ →
Analog Devices
Maximum Data Rate: 12 Mbps
Transceiver Configuration: 1 driver / 1 receiver, half-duplex
بەراوردکردن لەگەڵ MAX3483EESA+ →
Analog Devices
Maximum Data Rate: 12 Mbps
ESD Protection: ±15 kV
Transceiver Configuration: 1 transmitter and 1 receiver
بەراوردکردن لەگەڵ MAX3483EESA+ →
Maxim Integrated
Maximum Data Rate: 10 Mbps
Package: 8-SOIC
بەراوردکردن لەگەڵ MAX3483EESA+ →
Analog Devices
Maximum Data Rate: 12 Mbps
ESD Protection: ±15 kV
بەراوردکردن لەگەڵ MAX3483EESA+ →

MAX3483ECSA+T

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-SOIC
RS-485/RS-422 transceiver · 1 transmitter and 1 receiver · Half duplex · 3.0 V to 3.6 V · 12 Mbps · ±15 kV · Slew-rate-limited true RS-485/RS-422 driver · RS-485 and RS-422

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3483EESA

✅ جێگرەوەی ڕاستەوخۆ
📦 8-SOIC
Same MAX3483E core electrical function and 8-SOIC footprint; ordering code differs only by the trailing plus designation.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX3490EESA+

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 8-SOIC
RS-485/RS-422 transceiver · 3.3 V · 12 Mbps · ±15 kV · 1 driver · 1 receiver · RS-485 and RS-422 · Slew-rate limited

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3483EESA+ تایبەتمەندییەکان

Product Type RS-485/RS-422 transceiver
Supply Voltage Range 3.0V to 3.6V
Nominal Supply Voltage 3.3V
Maximum Data Rate 12Mbps
ESD Protection ±15kV
Driver Count 1 driver
Receiver Count 1 receiver
Supported Standards RS-422 and RS-485
Transceiver Configuration 1/1 half-duplex transceiver
Driver Slew Rate Slew-rate limited
پاکێج 8-pin SOIC
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی MAX3483EESA+ 8-pin soic

ڕێکخستنی پین بۆ MAX3483EESA+ (پاکێجی 8-pin soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 8-pin soic بۆ MAX3483EESA+

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3483EESA+.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX3483EESA+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Networking, Factory Automation Equipment, Building Control Networks, Test and Measurement Instrumentation, Embedded Data Links, Telecom and Remote Equipment.

🏭

Industrial Sensor Networking

The MAX3483EESA+ fits distributed industrial sensor nodes because its 3.0V to 3.6V operating range suits 3.3V embedded systems, while the 12Mbps capability provides ample margin for aggregated telemetry. Its balanced differential interface improves noise immunity over longer installation cables, and ±15kV ESD protection strengthens the transceiver against electrostatic discharge at an exposed connector. Place the device near the cable entry, use controlled-impedance differential routing, and provide termination only at the physical ends of the RS-485 bus.

🏭

Factory Automation Equipment

The MAX3483EESA+ is suitable for PLC-adjacent controllers, motor-control modules, and factory equipment that exchanges commands and status over RS-485. Its 3.3V supply operation, one-driver/one-receiver arrangement, and slew-rate-limited output support compact multidrop implementations while controlling edge energy and EMI. The 12Mbps rating supports fast control traffic, although engineers must limit practical distance according to cable type, topology, termination, and the noise conditions inside the machine enclosure.

🏠

Building Control Networks

The MAX3483EESA+ can connect HVAC controllers, lighting-control modules, room sensors, and other building-automation nodes using RS-485 or compatible RS-422 differential signaling. Its low 3.3V operating range aligns with embedded controllers, while differential reception helps reject common-mode noise found near motors and mains-derived power circuits. For reliable commissioning, verify common-mode range, ground-reference strategy, cable termination, and protection requirements at every building boundary.

🔧

Test and Measurement Instrumentation

The MAX3483EESA+ is appropriate for instrument control and data-acquisition modules that must communicate with a host over a balanced serial bus. The 12Mbps data rate supports high-volume commands and results, and slew-rate limiting helps reduce radiated EMI in compact laboratory or production-test systems. Place the transceiver close to the external connector, provide a continuous ground reference, and verify receiver thresholds and common-mode margin for the intended cable environment.

🖥️

Embedded Data Links

The MAX3483EESA+ connects a 3.3V microcontroller or module to RS-485 equipment without requiring a 5V interface supply. Its 8-pin SOIC package simplifies assembly into compact embedded boards, and its one-driver/one-receiver arrangement supports half-duplex communication when software controls direction. The 12Mbps capability can shorten transaction time, but the firmware must include bus turnaround time, collision avoidance, and adequate idle-state handling for multidrop networks.

🌐

Telecom and Remote Equipment

The MAX3483EESA+ can be used in remote monitoring units, telecom support equipment, and distributed access modules that require a compact balanced-interface connection. ±15kV ESD protection is useful where cables connect to field-installed equipment, and the 3.3V supply suits modern embedded platforms. The complete installation should still use enclosure-level surge and lightning protection when required, along with chassis grounding and isolation appropriate to the exposed-line environment.

What is the MAX3483EESA+?
The MAX3483EESA+ is a 3.3V-powered, 12Mbps RS-485/RS-422 transceiver containing one driver and one receiver in an 8-pin SOIC package. Analog Devices describes it as a slew-rate-limited, ±15kV ESD-protected device for balanced differential communications. It is used where a controller or sensor must exchange serial data with other nodes over a longer, noise-immune cable connection.
What is the operating voltage of MAX3483EESA+?
The MAX3483EESA+ operates from a 3.0V to 3.6V supply, with 3.3V as its nominal operating voltage. According to the Analog Devices MAX3483E documentation, the device is intended for 3.3V-powered systems. Place suitable supply decoupling close to the IC and verify that the complete interface circuit maintains its supply limits during startup and cable transients.
What is the maximum data rate of MAX3483EESA+?
The MAX3483EESA+ supports a maximum data rate of 12Mbps. The Analog Devices product description identifies the MAX3483E family as 12Mbps, slew-rate-limited RS-485/RS-422 transceivers. The 12Mbps figure describes device capability; practical line rate and distance still depend on cable characteristics, topology, termination, connector performance, and the noise environment.
Does MAX3483EESA+ support both RS-485 and RS-422?
Yes. The MAX3483EESA+ supports true RS-485 and RS-422 operation through balanced differential driver and receiver circuitry. Analog Devices identifies the device as a 3.3V-powered, ±15kV ESD-protected transceiver for both interfaces. The network configuration still matters: RS-485 generally supports multidrop buses, while RS-422 implementations commonly use point-to-point or configured driver pairs.
Where can I download the MAX3483EESA+ datasheet PDF?
The official MAX3483E product page at Analog Devices provides the manufacturer datasheet and supporting documentation for the family that includes MAX3483EESA+. The page identifies the MAX3483E as a production 3.3V, 12Mbps, slew-rate-limited RS-485/RS-422 transceiver. Use that documentation for the pin description table, electrical characteristics, recommended application circuit, and operating limits.
Where can I find the MAX3483EESA+ pinout?
The MAX3483EESA+ uses an 8-pin SOIC configuration, and its authoritative pin assignments are shown in the pin-description table of the Analog Devices MAX3483E datasheet. The exact package suffix determines lead style and ordering code, so confirm the top-mark and datasheet ordering information before routing copper. The product page links to the family datasheet needed to assign every supply, ground, driver, and receiver connection.
What can replace the MAX3483EESA+?
The MAX3483ECSA+T is a verified same-family replacement candidate using an 8-pin narrow SOIC package and the same 3.3V, 12Mbps, ±15kV ESD-protected RS-485/RS-422 function. The MAX3483EESA and MAX3483ECSA+T ordering variants differ in package or order-code details rather than the core interface function. Confirm temperature grade, tape-and-reel orientation, and marking requirements before substitution.
Is the MAX3483EESA+ the same as the MAX3483ECSA+T?
They are closely related 3.3V MAX3483E-family transceivers with 12Mbps operation, slew-rate-limited drivers, and ±15kV ESD protection. The MAX3483ECSA+T is identified as an 8-pin narrow-SOIC version, while MAX3483EESA+ is the EESA ordering configuration. Engineers should verify the mechanical drawing, temperature range, and marking before treating them as interchangeable.
What is the best Analog Devices equivalent for MAX3483EESA+?
The MAX3483ECSA+T is the closest documented Analog Devices candidate because it uses an 8-pin narrow-SOIC package and retains the 3.3V, 12Mbps, ±15kV ESD-protected RS-485/RS-422 specification. The MAX3490EESA+ is another relevant family member in the site catalog, but its functional and qualification differences must be checked. Do not select a replacement solely from the package count.
When should I choose MAX3483EESA+ over another RS-485 transceiver?
Choose the MAX3483EESA+ when the design needs a 3.3V, 12Mbps, ±15kV ESD-protected RS-485/RS-422 interface in an 8-pin SOIC and the manufacturer’s MAX3483E family offers the required behavior. A lower-speed alternative may be preferable for long, noisy cables where reduced slew rate and reduced EMI are more important than maximum throughput. Interface timing, topology, and cable margin should determine the final choice.
Is MAX3483EESA+ suitable for industrial sensor networks?
The MAX3483EESA+ is suitable for industrial sensor-network nodes that use a 3.3V supply and require a balanced differential RS-485 or RS-422 link. Its 12Mbps capability supports moderate-rate sensor aggregation, and ±15kV ESD protection adds an important interface margin. The network must still use approved cabling, proper grounding and surge protection, and an industrial-appropriate enclosure and protection strategy.
How should a MAX3483EESA+ RS-485 bus be terminated?
Terminate the RS-485 bus at the two physical ends with the termination value specified by the complete system design. Avoid adding termination at every node because excessive loading can reduce signal integrity. The MAX3483EESA+ slew-rate-limited driver helps control edge energy, but correct topology, termination, common-mode behavior, and grounding remain necessary for reliable reception.
Does MAX3483EESA+ need external ESD protection?
The MAX3483EESA+ includes ±15kV ESD protection on its communication interface, but that rating does not eliminate the need for a complete protection strategy. External protection may still be appropriate when the cable is longer, leaves the enclosure, or enters an industrial area with severe transients. Select the external network protection by working voltage, clamping level, current rating, capacitance, and system surge requirements.
How much power does MAX3483EESA+ consume?
The MAX3483EESA+ is a low-power, 3.3V transceiver, but its exact supply current depends on operating mode and the electrical conditions at the interface. The cited manufacturer material emphasizes the 3.3V low-power design rather than one universal current value. Use the electrical-characteristics table and the receiver or driver state applicable to the design for a defensible power-budget calculation.
Where can I request a quote for MAX3483EESA+?
Use the Request a Quote form on this page to request current commercial terms, quantity breaks, packaging, stock, and lead time for MAX3483EESA+. The live quote process is the appropriate route because availability and commercial conditions can change. Provide the exact suffix, reel orientation, production quantity, and target date when submitting the request.
What are the key specifications of MAX3483EESA+ that engineers should know?
The key MAX3483EESA+ specifications are a 3.0V to 3.6V operating range, 12Mbps maximum data rate, ±15kV ESD protection, one driver, one receiver, RS-485/RS-422 support, slew-rate-limited operation, and an 8-pin SOIC package. These parameters place the device in the low-power interface-IC category for balanced industrial communications. Board-level design still requires correct termination, layout, grounding, and surge assessment.

داتای سەرچاوەی ئەندازیاری بۆ MAX3483EESA+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose MAX3483EESA+ for a 3.3V system that requires one-driver/one-receiver RS-485 or RS-422 operation, up to 12Mbps data rate, slew-rate-limited edges, and ±15kV ESD protection in an 8-pin SOIC. MAX3483ECSA+T is a strong same-family candidate when the narrow-SOIC ordering code is preferred, but its mechanical and marking details should be checked against the PCB. MAX3483EESA offers the closest core-function match but differs in ordering suffix. MAX3490EESA+ belongs to the same broader low-power interface family, yet its specific pin behavior and electrical characteristics should be compared before substitution. None of these choices removes the need to validate cable length, termination, grounding, common-mode margin, surge protection, and production ordering requirements.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX3483ECSA+T MAX3483EESA MAX3490EESA+
Package 8-SOIC 8-pin narrow SOIC 8-SOIC 8-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Function 1/1 half-duplex RS-485/RS-422 transceiver 1/1 half-duplex RS-485/RS-422 transceiver 1/1 half-duplex RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supply Voltage 3.0V to 3.6V 3.3V powered 3.3V powered 3.3V powered
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver

جیاکەرەوە سەرەکییەکان

  • Higher headline data rate than the standard low-speed MAX3483 family description (بەراورد بەMAX3483ECSA+T)
  • Complete transceiver function in an 8-pin SOIC (بەراورد بەMAX3490EESA+)
  • Direct ordering-code match for designs specified without the trailing plus (بەراورد بەMAX3483EESA)

تێبینییەکانی دیزاین

Place the MAX3483EESA+ close to the external communication connector and route the RS-485 or RS-422 pair as a controlled-impedance differential pair. Keep the pair lengths matched, minimize stub branches, and place termination at the physical ends of the bus rather than beside every node. Locate the supply bypass capacitor at the device’s supply pins and use a continuous ground reference adjacent to the signal path.

Do not treat the 12Mbps device rating as an unrestricted cable-distance specification. Long cables, poor terminations, excessive node loading, and large common-mode disturbances can reduce reliable communication distance even when the logic-level timing is correct. Establish the intended topology, cable impedance and length, termination scheme, grounding method, and environmental noise conditions before releasing the board layout.

The MAX3483EESA+ uses a slew-rate-limited driver to reduce high-frequency harmonics and reflections, but EMI performance still depends on the complete implementation. Keep the driver output path short, use a continuous return path, avoid excessive connector adapters, and avoid routing the differential pair parallel to switching nodes or power-converter inductors. Add external surge protection when the interface leaves the protected equipment enclosure.

Confirm the exact ordering code, package drawing, temperature grade, tape orientation, and top marking before releasing a replacement order. MAX3483E ordering suffixes can distinguish mechanical and production details even when the electrical description is similar. For any substitution, compare supply range, driver and receiver enable behavior, ESD rating, timing, common-mode range, and every assigned pin in the manufacturer datasheet.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The trailing plus in MAX3483EESA+ commonly denotes a lead-free ordering option, but the specific compliance declarations were not stated on the cited product pages. Automotive qualification is not indicated for this interface transceiver.

داتا پشتڕاستکراوەتەوە لە: 2026-11-02 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX3483EESA+ datasheet MAX3483EESA+ datasheet pdf MAX3483EESA+ pinout MAX3483EESA+ equivalent MAX3483EESA+ replacement MAX3483EESA+ drop-in substitute MAX3483EESA+ price MAX3483EESA+ stock Analog Devices MAX3483EESA+ MAX3483EESA+ 8-SOIC RS-485 MAX3483EESA+ 12Mbps transceiver MAX3483EESA+ industrial sensor network MAX3483EESA+ vs MAX3483ECSA+T MAX3483EESA+ vs MAX3490EESA+

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices MAX3483EESA+ MAX3483ECSA+T MAX3483EESA MAX3490EESA+ RS-485 RS-422 transceiver interface IC half-duplex communication differential signaling slew-rate-limited driver ESD protection 3.3V power supply 12Mbps data rate ±15kV ESD protection SOIC-8 surface mount industrial automation sensor networking building automation test and measurement EMI common-mode voltage
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ