MC1458P - Dual 1 MHz 30 V Operational Amplifier | Texas Instruments
MPN: MC1458P ✓ چالاکMC1458P گشتی
جێگرەوەکانی جێگۆڕکێ بۆ MC1458P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MC1458P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, RoHS Status, Amplifier Type, AEC-Q100 Qualification, Number of Channels.
LM1458N
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
CA1458
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
RC4558P
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC1458P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Number of Amplifier Channels | 2 channels |
| Product Type | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 1 MHz |
| Frequency Compensation | Internal frequency compensation |
| Short-Circuit Protection | Yes |
| Latch-Up | Absence of latch-up |
| Offset Null Capability | Not provided |
| پاکێج | 8-pin PDIP |
| جۆری دامەزراندن | Through-hole |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
ڕێکخستنی پینی MC1458P
| پین 1 | NC — Offset null not provided; use according to the manufacturer datasheet pin configuration |
| پین 2 | IN- — Inverting input of amplifier A |
| پین 3 | IN+ — Non-inverting input of amplifier A |
| پین 4 | V- — Negative supply or ground connection |
| پین 5 | IN+ — Non-inverting input of amplifier B |
| پین 6 | IN- — Inverting input of amplifier B |
| پین 7 | OUT — Output of amplifier B |
| پین 8 | OUT — Output of amplifier A |
بەکارهێنانە باوەکان
MC1458P گونجاوە بۆ 6 بەکارھێنانs: General-Purpose Voltage Follower, Audio Preamplifier, Industrial Instrumentation Signal Conditioning, Active Filter and Summing Amplifier, Power-Supply Feedback and Monitoring, Test and Measurement Buffering.
General-Purpose Voltage Follower
The MC1458P fits a voltage-follower stage because the manufacturer identifies a high common-mode input voltage range and no-latch-up behavior as advantages for this configuration. With two internally compensated amplifiers in one 8-pin PDIP package, the device can provide buffering for a source whose output impedance is too high for the next stage. A follower reduces loading while preserving the signal voltage, although the designer must confirm the common-mode input range and output-swing limits for the selected 1 MHz and 30 V operating conditions.
پێشنیارکراو
Audio Preamplifier
The MC1458P can serve as a general-purpose audio preamplifier when the signal bandwidth is below its 1 MHz gain-bandwidth-product capability and the required output swing is available. The dual-amplifier configuration is useful for stereo or two-stage audio boards, while short-circuit protection helps isolate a downstream fault. Because the verified information does not state noise, slew rate, or output-current values, the design must avoid assuming studio-grade performance and should evaluate those parameters from the manufacturer datasheet.
پێشنیارکراو
Industrial Instrumentation Signal Conditioning
The MC1458P is suitable for basic industrial instrumentation amplification around sensor outputs when the common-mode and output-voltage limits fit the measurement range. Its dual channel count allows one package to implement a matched pair of gain or filtering stages, and the internally compensated architecture avoids external compensation components in standard feedback networks. The 30 V supply capability supports legacy ±15 V-style systems, but designers should verify temperature behavior, input bias current, offset, and electromagnetic requirements before using it in new precision systems.
پێشنیارکراو
Active Filter and Summing Amplifier
The MC1458P is appropriate for conventional active-filter and summing-amplifier blocks where internally compensated closed-loop stability and a 1 MHz gain-bandwidth product are adequate. Two independent channels can implement a two-pole filter or a summing stage in a single DIP package, reducing board-space requirements compared with two single amplifiers. Component tolerances and the amplifier's offset and bias-current limits will determine practical accuracy, while the output must remain within the verified operating range.
پێشنیارکراو
Power-Supply Feedback and Monitoring
The MC1458P can be used in legacy power-supply feedback, current-monitor, and threshold-control circuits where a 30 V-class dual operational amplifier and DIP-8 footprint suit the board revision. The high common-mode input range is useful when monitoring a fraction of a higher-voltage rail, and internal frequency compensation simplifies closed-loop implementation. The principal limitation is that the part is not presented as rail-to-rail, so the monitored signal and amplifier output must remain inside the datasheet limits.
پێشنیارکراو
Test and Measurement Buffering
The MC1458P is useful in test and measurement fixtures for general-purpose buffering, gain adjustment, and signal isolation when the measured bandwidth is modest. Its 1 MHz gain-bandwidth product supports low-to-megahertz instrumentation depending on closed-loop gain, and the internally compensated channels avoid external compensation components. The verified data does not provide input capacitance, offset drift, or noise specifications, so precision measurement and high-impedance source designs should confirm those characteristics before selecting this legacy-style dual amplifier.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MC1458P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM1458N | CA1458 | RC4558P |
|---|---|---|---|---|
| Brand | Texas Instruments | National Semiconductor | Renesas Electronics | ROHM Semiconductor |
| Package | DIP-8 | DIP-8 | DIP-8 | DIP-8 |
جیاکەرەوە سەرەکییەکان
- Two general-purpose amplifier channels in one DIP-8 device (بەراورد بەLM1458N)
- Manufacturer-documented internal frequency compensation (بەراورد بەRC4558P)
- Short-circuit protection without offset-null pins (بەراورد بەCA1458)
تێبینییەکانی دیزاین
Verify the complete power-supply arrangement against the Texas Instruments MC1458 datasheet before layout. The verified product data establishes a 30 V maximum supply framework but does not provide minimum supply voltage, quiescent current, output-current limits, or supply sequencing requirements. Place the decoupling capacitors close to the supply and ground pins according to the manufacturer's guidance, and ensure the power rails and signal amplitudes do not exceed the verified operating limits.
Use the standard PDIP-8 footprint and confirm pin 1 orientation from the manufacturer pin configuration before inserting the device. Keep analog input and feedback traces short, route output returns away from sensitive inputs, and provide an unobstructed ground path. Because the MC1458P has no offset-null capability, do not allocate a null-adjustment network unless the selected revision explicitly provides one.
Do not assume that every MC1458-family listing is a direct replacement for the MC1458P. Confirm the package suffix, pinout, common-mode range, output swing, offset voltage, bias current, slew rate, noise, quiescent current, and frequency-compensation behavior. The retrieved cross-reference sources support investigating LM1458N, CA1458, and RC4558P, but a production substitution still requires a manufacturer-datasheet comparison and, where appropriate, bench validation.
Keep the closed-loop gain and capacitive loading within the manufacturer's stability guidance. The MC1458P is internally frequency compensated, so external compensation components are normally unnecessary, but a high capacitive load or an unusually high gain can still affect transient response and oscillation margin. For long feedback paths or breadboard prototypes, shorten the feedback loop and compare the measured output against the expected closed-loop response.
زانیاری پابەندبوون
The retrieved manufacturer and distributor snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields therefore remain unknown rather than being inferred.