NXP Semiconductors

MC34940EG - Electric Field Imaging Device | NXP Semiconductors

料号: MC34940EG ✓ 量产中
8 mA Vdss 24-SOIC (0.295 inch, 7.50 mm width) Package 120 kHz optimized Speed
最小起订量: 1 |

MC34940EG 概述

The NXP Semiconductors MC34940EG is an electric field imaging device for non-contact object detection, with an excitation frequency optimized for 120 kHz, a typical supply current of 8 mA, and a 24-SOIC package. The device generates an adjustable low-frequency sine wave through an external resistor and senses changes in an electric field established between external electrodes.

An electric field imaging device is a sensor interface that detects objects without physically touching them. Its operating chain begins with an excitation signal, continues through an externally created electric field, and concludes with a measured response indicating a change in the sensed environment. Within the broader product hierarchy, the MC34940EG is a semiconductor sensor interface, a specialized sensing IC, and an integrated circuit designed for proximity and object-detection systems.

Key features include a 120 kHz-optimized sine-wave generator, external-resistor frequency adjustment, and a supply current of 8 mA. The adjustable excitation allows the sensing system to be adapted to different electrode geometries and target materials. The 24-SOIC package provides a conventional surface-mount format for industrial control, embedded sensing, and compact instrumentation designs.

Technically, the MC34940EG uses its output to drive an electric field between external electrodes. When an object enters or leaves that field, the electrical response changes, allowing the system to infer presence, position, or material-related variation. The low-frequency sine-wave architecture avoids the need for a high-frequency RF front end while supporting cost-sensitive, non-contact sensing applications.

Typical uses include touchless activation, object-presence detection, capacitive-interface enhancement, material inspection, and industrial proximity sensing. The device is especially useful where moving mechanical contacts would be undesirable or where objects need to be detected across a physical barrier.

Designers should select resistor and capacitor values using the manufacturer’s application guidance, place the external excitation and sensing components close to the device, and keep sensitive electrode traces away from noisy switching nodes. PCB cleanliness, guarded sensing traces, and stable electrode geometry are important because parasitic capacitance can alter the measured field response.

This page combines the manufacturer datasheet details with practical application guidance, ordering-code comparisons, design notes, and direct links to technical documentation. It supports faster component selection while emphasizing that electrode geometry and signal-chain layout determine final sensing performance.

直接替换替代料: MC34940EG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MC34940EG-R2

✅ 直接替换
📦 24-SOIC
Ordering suffix differs; the stated MC34940 electrical function and 120 kHz excitation are unchanged, giving a 0% stated electrical-parameter difference.

📋 参考替代料(不在目录中)

MC34940EG/R2

✅ 直接替换
📦 24-SOIC
Ordering format differs; no MC34940 electrical-parameter difference is stated, while the package remains 24-SOIC for a 0% stated parameter difference.

📋 参考替代料(不在目录中)

MC34940EG 最大额定值与电气特性

Device Type Electric field imaging device
Sensor Category Image sensor interface IC
Excitation Frequency 120 kHz optimized
电源电流 8 mA
Input Type Logic
输出类型 Voltage
Sensing Method Non-contact electric-field sensing
Excitation Waveform Low-frequency sine wave
Frequency Adjustment External resistor
封装 24-SOIC (0.295 inch, 7.50 mm width)
Packaging Tube
安装类型 Surface mount

MC34940EG 24-soic (0.295 inch, 7.50 mm width) 引脚配置指南

MC34940EG(24-soic (0.295 inch, 7.50 mm width) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MC34940EG 的 24-soic (0.295 inch, 7.50 mm width) 封装引脚图

暂无详细引脚数据: MC34940EG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MC34940EG 适用于 6 应用s: Non-Contact Object Presence Detection, Touchless User Interfaces, Industrial Material Presence Monitoring, Liquid and Container Level Sensing, Handheld and Portable Proximity Products, Low-Cost Sensor Prototyping.

🧩

Non-Contact Object Presence Detection

The MC34940EG fits presence detection when a target must be sensed without touching it. External electrodes establish an electric field, and the IC’s 120 kHz-optimized low-frequency sine wave enables the system to observe field changes caused by an approaching or departing object. Its 8 mA supply current supports a focused embedded implementation rather than a large sensing power budget. The host circuit can compare the output against a calibrated threshold or process the signal digitally. Electrode size, spacing, object composition, and enclosure material will determine sensitivity, so laboratory calibration is required for reliable detection.

📱

Touchless User Interfaces

The MC34940EG can support touchless controls where a user approaches a panel without mechanically contacting a switch. Its external-electrode architecture allows the sensing field to be positioned behind a nonconductive surface, while the 120 kHz-optimized excitation provides a measurable response for signal conditioning. The 24-SOIC package simplifies integration into compact controller boards. In a production design, evaluate surface coatings, humidity, cable routing, and the possibility of adjacent controls influencing one field. A microcontroller or analog front end can convert the voltage output into threshold, proximity, or gesture-related decisions.

🏭

Industrial Material Presence Monitoring

The MC34940EG is suitable for industrial systems that need to confirm the presence of material near electrodes, including bins, chutes, rollers, or guarded working areas. The IC creates an adjustable sine-wave excitation through an external resistor and detects object-related changes in the field. Its 8 mA supply current is useful in compact machinery-control electronics, and the 24-SOIC package fits conventional surface-mount assembly. Mechanical vibration, conductive dust, moisture, and changing electrode spacing can affect performance, so the sensing baseline and threshold should be recalibrated across expected production and environmental conditions.

💧

Liquid and Container Level Sensing

The MC34940EG can participate in level sensing when the liquid, container, or dielectric structure changes the electric field between external electrodes. The 120 kHz-optimized excitation and adjustable resistor setting give the designer control over the drive condition, while the voltage output can be evaluated by an analog or digital control circuit. The 24-SOIC package allows the sensing IC to be placed away from wet areas while the electrodes enter the vessel or chamber. Calibration must account for liquid conductivity, dielectric constant, foam, temperature, condensation, and residue on the electrodes, which can create drift or false detections.

🔋

Handheld and Portable Proximity Products

The MC34940EG can be used in portable products requiring proximity sensing without a mechanically exposed switch. Its 8 mA supply current helps limit the energy burden of battery-operated equipment, and its external-electrode method permits sensing through a molded enclosure. The 24-SOIC package provides a compact surface-mount footprint for control boards. Designers should minimize trace length and keep the electrode area away from antennas, display conductors, and high-impedance sensor lines. Sensitivity calibration is particularly important when the enclosure, coating, or hand position changes the field geometry during normal use.

🔧

Low-Cost Sensor Prototyping

The MC34940EG supports low-cost sensor prototyping because it combines the excitation and field-response measurement in one 24-SOIC IC while leaving electrode geometry under the designer’s control. The low-frequency sine wave is optimized for 120 kHz and can be adjusted with an external resistor, allowing the prototype to be evaluated across different electrode dimensions. A breadboard or compact analog board can expose the output for oscilloscope and microcontroller analysis. Keep prototype wiring short, maintain a stable reference connection, and document each resistor and capacitor value so the final layout can preserve the demonstrated sensing behavior.

推荐产品汇总

MC34940 Electric field imaging device family 用于: Non-Contact Object Presence Detection, Touchless User Interfaces, Industrial Material Presence Monitoring, Liquid and Container Level Sensing, Handheld and Portable Proximity Products, Low-Cost Sensor Prototyping MC34940EG-R2 Same MC34940 device ordering code 用于: Non-Contact Object Presence Detection, Industrial Material Presence Monitoring, Handheld and Portable Proximity Products MC34940EG/R2 Same MC34940 device ordering code 用于: Touchless User Interfaces, Liquid and Container Level Sensing, Low-Cost Sensor Prototyping
What is the MC34940EG used for?
The MC34940EG is an electric field imaging device used for cost-sensitive, non-contact object detection. It generates an adjustable low-frequency sine wave optimized for 120 kHz, drives an electric field through external electrodes, and detects changes caused when an object enters that field. According to the NXP MC34940 datasheet, the device supports sensing through a barrier without direct mechanical contact.
What are the key specifications of MC34940EG that engineers should know?
The MC34940EG is a 24-SOIC electric field imaging IC with a 120 kHz-optimized excitation signal, 8 mA supply current, logic input, and voltage output. The excitation frequency is adjustable with an external resistor, while the sensing electrodes are external to the IC. According to the NXP MC34940 datasheet, the architecture is intended for non-contact object detection in cost-sensitive systems.
How does MC34940EG detect objects without contact?
The MC34940EG detects objects by measuring changes in an electric field created between external electrodes. Its internal excitation generates a low-frequency sine wave optimized for 120 kHz, and the external resistor sets the excitation condition. When an object approaches or enters the field, the sensed response changes, allowing the host electronics to infer presence or another physical change.
What is the excitation frequency of MC34940EG?
The MC34940EG excitation frequency is optimized for 120 kHz. The device generates a low-frequency sine wave, and the frequency can be adjusted using an external resistor. According to the NXP MC34940 datasheet, this adjustable excitation supports the creation of an external electric field for non-contact sensing, although the final field geometry and component selection remain part of the system design.
What package does MC34940EG use?
The MC34940EG uses a 24-SOIC package measuring 0.295 inch wide by 7.50 mm in the stated package data. It is supplied in a tube for the listed ordering configuration. The package supports surface-mount PCB assembly, while the external electrodes, frequency-setting resistor, bypass components, and signal-processing components remain separate from the IC.
Where can I download the MC34940EG datasheet PDF?
The MC34940EG datasheet PDF is available from the official NXP document address listed on this page. It is titled MC34940, Electric Field Imaging Device and contains the device description, application information, electrical characteristics, and pin details. Use that manufacturer datasheet for final schematic, resistor-selection, package, and operating-limit decisions.
Where can I find the MC34940EG pinout?
The MC34940EG pinout is shown in the manufacturer MC34940 datasheet’s pin-description and package-drawing material. The IC is housed in a 24-SOIC package, but the complete pin-name sequence should be taken directly from the NXP datasheet before assigning PCB tracks. Do not infer electrical roles from neighboring pins or from another ordering code.
What is the difference between MC34940EG and MC34940EG-R2?
The MC34940EG and MC34940EG-R2 both identify members of the NXP MC34940 electric field imaging family, but their ordering codes differ. The available technical information identifies the same MC34940 device function, including external-electrode sensing and a 120 kHz-optimized sine-wave excitation. Before substituting one for the other, confirm the package, temperature grade, reel or tube configuration, and any suffix-specific ordering conditions.
What is the best drop-in replacement for MC34940EG?
No independently verified drop-in replacement for MC34940EG is identified. The available MC34940EG-R2 ordering code belongs to the same NXP family and uses the same MC34940 device architecture, but ordering suffix differences require checking package, shipping form, and temperature rating. Treat MC34940EG-R2 as a candidate for engineering review rather than an automatic substitution.
Can MC34940EG-R2 replace MC34940EG?
MC34940EG-R2 may be considered for MC34940EG replacement because both are order codes for the MC34940 family, but they should not be treated as automatically interchangeable without a final ordering review. Check the 24-SOIC package, operating-temperature range, supply or packing configuration, and any suffix-specific qualification. The Request a Quote form on this page can confirm the exact suffix and current lead time.
When should I choose MC34940EG over a conventional proximity sensor?
Choose MC34940EG when the system needs an electric-field-based sensing method with external electrodes and adjustable sine-wave excitation. It is suited to non-contact detection where objects can influence a field without touching a conventional target. A conventional proximity sensor may be simpler for isolated metal targets, while MC34940EG is more useful when electrode geometry and field interaction are central to the application.
Is MC34940EG suitable for non-contact industrial sensing?
The MC34940EG is suitable for non-contact sensing designs because it is intended to detect objects in an electric field created by external electrodes. Its 120 kHz-optimized excitation and 8 mA supply current support cost-sensitive embedded sensing. Industrial use still requires validation of electrode spacing, surface contamination, temperature effects, noise immunity, and the enclosure material.
Where can I buy MC34940EG online?
Use the Request a Quote form on this page to request MC34940EG availability, quantity, and lead time from XAIPART. The form avoids stale pricing and confirms the exact ordering suffix, package, and packing configuration needed for production. For technical confirmation, retain the official NXP datasheet link on this page as the primary reference for the MC34940EG.
What is the price of MC34940EG?
The current MC34940EG price depends on quantity, order suffix, and packaging. Use the Request a Quote form on this page for a current quotation matched to the MC34940EG ordering code and required quantity. The quote process also helps confirm stock status, production lead time, and whether the requested packing form is available.
What is the lead time for MC34940EG?
MC34940EG lead time depends on current manufacturer and channel inventory, the selected ordering suffix, and the requested quantity. Use the Request a Quote form on this page to request a current lead-time commitment and available stock. For production planning, specify the package, tube or reel requirement, estimated annual usage, and required delivery schedule with the request.

工程参考数据: MC34940EG ——对比、设计指导和合规信息。

选型指南

Choose MC34940EG when the design requires non-contact detection based on an electric field created between external electrodes. Its 120 kHz-optimized, resistor-adjustable sine wave and 8 mA supply current make it suitable for cost-sensitive embedded sensing, touchless controls, material-presence monitoring, and prototype development. MC34940EG-R2 and MC34940EG/R2 are same-family ordering codes that may be suitable for PCB reuse, but their suffix-specific packing, temperature, and ordering conditions should be checked before substitution. No cross-manufacturer drop-in part has been established, so an alternative technology may require redesign. If the target is a simple isolated metal object, a conventional proximity sensor may offer a simpler circuit; choose MC34940EG when field geometry, dielectric interaction, or sensing through a barrier is central to the design.

与替代料对比

参数 本产品 MC34940EG-R2 MC34940EG/R2
Device Type Electric field imaging device Electric field imaging device Electric field imaging device
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 24-SOIC (0.295 inch, 7.50 mm width) 24-SOIC 24-SOIC
Excitation Frequency 120 kHz optimized 120 kHz optimized 120 kHz optimized
Supply Current 8 mA 8 mA 8 mA
Input Type Logic Logic Logic
Output Type Voltage Voltage Voltage
Sensing Principle Non-contact electric-field detection using external electrodes Non-contact electric-field detection using external electrodes Non-contact electric-field detection using external electrodes
Frequency Adjustment External resistor External resistor External resistor

关键差异点

  • Purpose-built electric-field imaging function (对比 MC34940EG-R2)
  • Compact 24-SOIC implementation (对比 MC34940EG/R2)
  • External-electrode flexibility (对比 MC34940EG-R2)

设计说明

Place the MC34940EG and its frequency-setting and bypass components close to the external electrode connections. Keep sensitive traces short, maintain a stable return path, and avoid routing them beside switching nodes or high-current conductors. Electrode geometry and trace parasitics directly affect the measured field response, so reproduce the validated spacing, orientation, and guard arrangement when moving from prototype to production PCB.

Treat the voltage output as a field-sensitive measurement rather than a conventional fixed logic signal. Establish a baseline with the intended electrode geometry, filter noise outside the useful excitation band, and use controlled thresholding or gain in the downstream analog or digital path. Recalibrate when target distance, material, humidity, contamination, or enclosure geometry changes, since each of these conditions can alter the sensor response.

Use the manufacturer’s recommended bypass network and route it directly to the power and ground pins. The device is listed with an 8 mA supply current, but total system demand also includes the frequency-setting resistor path, output processing, and electrode drive current. Confirm the complete rail and ground requirements against the MC34940 datasheet before fixing the power-supply capacity and grounding strategy.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the cited technical material. The device is not presented as an automotive-qualified AEC-Q100 product.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MC34940EG datasheet MC34940EG datasheet pdf MC34940EG pinout MC34940EG 24-SOIC MC34940EG 120 kHz MC34940EG 8 mA NXP MC34940EG MC34940EG equivalent MC34940EG replacement MC34940EG cross reference MC34940EG price MC34940EG stock MC34940EG electric field sensor MC34940EG non-contact sensing

相关元器件 & 术语

NXP Semiconductors MC34940EG MC34940 MC34940EG-R2 MC34940EG/R2 Electric field imaging device Image sensor interface IC Sensor interface Proximity sensor Semiconductor Surface-mount IC 24-SOIC SOIC package family Non-contact sensing Electric-field detection External electrodes Low-frequency sine wave 120 kHz excitation Frequency adjustment resistor Voltage output Logic input 8 mA supply current RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情