Microchip Technology

MCP3465R-E/SFX - 16-Bit Low-Noise ADC | Microchip

MPN: MCP3465R-E/SFX ✓ چالاک
Integrated Vdss 12-UQFN, 2 mm x 2 mm Package
MOQ: 1 |

MCP3465R-E/SFX گشتی

The Microchip Technology MCP3465R-E/SFX is a low-noise 16-bit delta-sigma analog-to-digital converter with one differential channel or two single-ended channels, a programmable data rate up to 153.6 ksps, and a 12-UQFN package measuring 2 mm by 2 mm. It integrates an internal voltage reference, internal oscillator, temperature sensor, and burnout-sensor detection to reduce external component requirements.

A delta-sigma ADC is a voltage regulator whose analog input is converted into a high-resolution digital stream by oversampling and digital filtering. It belongs to the ADC and data-acquisition hierarchy, where it sits between sensor or measurement signals and a digital microcontroller or processing system. The MCP3465R is designed for precision measurements that require low noise, programmable conversion speed, compact packaging, and a direct serial digital interface.

Key features include 16-bit resolution, a maximum programmable rate of 153.6 ksps, and support for either two single-ended inputs or one differential input. The internal reference and oscillator reduce system complexity, while the integrated temperature sensor and burnout-current detection support measurement integrity. The 2 mm by 2 mm UQFN-12 package is particularly useful in compact industrial, instrumentation, and embedded data-acquisition systems where board area is limited.

Operationally, the converter accepts analog voltages referenced to its supply and ground connections. Differential operation helps reject common-mode disturbances when measuring small sensor signals, while two single-ended inputs allow one device to serve two related measurements. The programmable data rate provides a practical balance between throughput, averaging, and noise performance, allowing the system architect to select an appropriate conversion rate for each measurement task.

Typical uses include industrial process monitoring, precision sensor acquisition, battery or laboratory instrumentation, and embedded measurement modules. The 153.6 ksps maximum rate supports relatively high-rate sampling, while the low-noise 16-bit architecture is useful when the measured quantity changes more slowly than the converter's maximum conversion capability.

Layout should prioritize short analog traces, a quiet ground reference, and placement of input and reference components close to the device. Because the UQFN package is only 2 mm by 2 mm, assembly planning, land-pattern verification, and thermal-path design require close attention. The manufacturer datasheet is the controlling reference for pin assignments, electrical limits, and recommended application circuits.

This product page combines the MCP3465R family specifications with package information, sourcing guidance, practical design notes, and a conservative drop-in assessment. It distinguishes documented functions from unavailable channel-specific details and avoids presenting functionally similar devices as footprint-compatible replacements.

جێگرەوەکانی جێگۆڕکێ بۆ MCP3465R-E/SFX — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

MCP3465R-E/SFX زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

وردی 16 bit
Architecture Delta-sigma
Maximum Data Rate 153.6 ksps
Input Configuration 1 differential channel or 2 single-ended channels
Internal Voltage Reference Integrated
Internal Oscillator Integrated
Temperature Sensor Integrated
Burnout Sensor Detection Integrated
پاکێج 12-UQFN, 2 mm x 2 mm
جۆری دامەزراندن Surface mount
مەودای پلەی گەرمیی کارکردن -40 °C to +125 °C
دۆخی RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

ڕێنمایی ڕێکخستنی پینی MCP3465R-E/SFX 12-uqfn, 2 mm x 2 mm

ڕێکخستنی پین بۆ MCP3465R-E/SFX (پاکێجی 12-uqfn, 2 mm x 2 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 12-uqfn, 2 mm x 2 mm بۆ MCP3465R-E/SFX

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MCP3465R-E/SFX.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MCP3465R-E/SFX گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Acquisition, Precision Process Monitoring, Laboratory Instrumentation, Battery-Powered Measurement, Environmental Monitoring, Embedded Data Acquisition.

🏭

Industrial Sensor Acquisition

The MCP3465R-E/SFX fits compact industrial sensor modules that require higher resolution than a low-resolution measurement ADC while keeping the converter area small. Its 16-bit delta-sigma architecture supports one differential channel or two single-ended channels, and the programmable rate can reach 153.6 ksps. Differential operation is useful when the sensor output is small and susceptible to common-mode noise. The integrated voltage reference, oscillator, and temperature sensor reduce the number of external support components. Design the analog input path with short traces, a stable reference return, and filtering matched to the sensor bandwidth. The principal trade-off is that the 2 mm by 2 mm UQFN-12 footprint requires careful assembly planning and makes pin assignment verification especially important.

🏭

Precision Process Monitoring

The MCP3465R-E/SFX is appropriate for process-monitoring equipment that measures slow or moderate-rate analog signals with a compact, high-resolution converter. A 16-bit delta-sigma ADC can provide useful numerical resolution, while the programmable data rate up to 153.6 ksps allows the designer to reduce conversion activity when measuring slowly changing process variables. Two single-ended inputs can monitor two related signals, or the device can operate in differential mode when common-mode rejection is important. Its integrated reference and oscillator help minimize board area and external component count. Input filtering, electrical range matching, calibration, and grounding remain essential. The compact UQFN-12 package supports dense instrumentation, but the design must preserve analog signal quality from the sensor through the converter.

🧩

Laboratory Instrumentation

The MCP3465R-E/SFX can serve as the measurement front end in compact laboratory instruments that need multiple input configurations without occupying substantial PCB area. The converter provides two single-ended channels or one differential channel at up to 153.6 ksps, enabling it to handle sensor bridges, transducers, or buffered voltage inputs. Differential operation is especially valuable when the measured signal is smaller than the common-mode voltage present on the input pair. Integrated reference and oscillator functions simplify instrument design, while burnout detection can assist with input-fault diagnosis. Engineers should budget adequate acquisition time, apply anti-alias filtering based on the selected data rate, and verify the converter's electrical limits against the front-end range. Its small package helps reduce instrument footprint without removing the need for careful layout.

⚡

Battery-Powered Measurement

The MCP3465R-E/SFX is suitable for battery-powered condition-monitoring systems where a low-noise 16-bit converter and compact 2 mm by 2 mm package help balance measurement performance with board area. Its two single-ended inputs can reduce the number of separate converters needed for related battery, temperature, or load measurements. The integrated voltage reference and oscillator can also reduce external component count, while the programmable data rate provides flexibility when prioritizing conversion throughput versus energy use. The product's -40 °C to +125 °C family temperature specification covers demanding environments, but the complete system still requires a regulated supply and careful analog grounding. Verify current consumption, duty-cycle behavior, and start-up requirements in the manufacturer datasheet before finalizing the power budget.

🌐

Environmental Monitoring

The MCP3465R-E/SFX is well matched to compact environmental monitoring nodes that digitize outputs from chemical, gas, moisture, or other analog sensors. Two single-ended inputs allow the node to service two sensing channels, while differential operation can improve measurement integrity when the sensor output is referenced to a nonzero common-mode voltage. The converter's programmable rate up to 153.6 ksps accommodates both slow environmental trends and faster sensor transients. Integration of a voltage reference, oscillator, and temperature sensor reduces auxiliary component requirements. Because the package is only 2 mm by 2 mm, PCB assembly and the exposed-pad thermal connection require careful planning. The analog section should be isolated from noisy digital activity, and input filters should be selected to prevent out-of-band energy from affecting the measurement result.

🖥️

Embedded Data Acquisition

The MCP3465R-E/SFX is useful in embedded data-acquisition modules that need a compact, noise-conscious ADC paired with a digital controller. Its 16-bit delta-sigma conversion, maximum programmable rate of 153.6 ksps, and internal reference and oscillator reduce external circuitry and software setup. The controller can select the required conversion rate according to the workload, while dual single-ended inputs provide flexibility for shared sensing channels. Differential mode supports lower-noise acquisition from bridge or current-sense outputs. Layout should keep analog routing short, place filtering near the converter, and maintain a low-impedance return path to reduce coupling from digital clocks and switching nodes. Verify the serial interface timing and required digital supply levels from the manufacturer datasheet before assigning microcontroller pins or peripheral routing.

کورتەی بەرهەمە پێشنیارکراوەکان

MCP3465R Base device family for the selected converter بەکارهێنراوە لە: Industrial Sensor Acquisition, Precision Process Monitoring, Laboratory Instrumentation, Battery-Powered Measurement, Environmental Monitoring, Embedded Data Acquisition MCP3465RT-E/SFX Same MCP3465R family ordering configuration بەکارهێنراوە لە: Industrial Sensor Acquisition, Precision Process Monitoring, Laboratory Instrumentation, Battery-Powered Measurement, Environmental Monitoring, Embedded Data Acquisition
What is the MCP3465R-E/SFX?
The MCP3465R-E/SFX is a Microchip Technology low-noise, 16-bit delta-sigma ADC with one differential channel or two single-ended channels and a programmable conversion rate up to 153.6 ksps. According to the Microchip MCP3465R datasheet DS20006414C, the device is offered in an ultra-small 2 mm by 2 mm UQFN-12 package and includes an internal voltage reference, internal oscillator, temperature sensor, and burnout-sensor detection.
What is the conversion speed of the MCP3465R-E/SFX?
The MCP3465R-E/SFX supports a programmable data rate of up to 153.6 ksps. According to the Microchip MCP3465R datasheet DS20006414C, this rate applies to a 16-bit delta-sigma converter that can operate as one differential-input ADC or two single-ended-input ADCs. The selected rate should be matched to the signal bandwidth and the required measurement latency.
Where can I download the MCP3465R-E/SFX datasheet PDF?
The official MCP3465R-E/SFX datasheet is available from Microchip Technology through the MCP3465R family data sheet. The manufacturer document identifies the converter as a two-channel, 153.6 ksps, low-noise 16-bit delta-sigma ADC and includes the electrical, package, and application information required for design-in review.
Where is the MCP3465R-E/SFX pinout located?
The MCP3465R-E/SFX pinout is located in the pin-description and package drawings in the Microchip MCP3465R datasheet DS20006414C. The device is specified in a 12-UQFN package measuring 2 mm by 2 mm. Use the manufacturer drawing for exact pin numbers, exposed-pad connections, and recommended land-pattern dimensions before routing the PCB.
Does the MCP3465R-E/SFX include a voltage reference and oscillator?
Yes, the MCP3465R-E/SFX includes an internal voltage reference and internal oscillator. The Microchip product page also identifies an integrated temperature sensor and burnout-sensor detection. These functions can reduce the number of external support components required for a compact, low-noise measurement design.
Can the MCP3465R-E/SFX measure differential and single-ended signals?
The MCP3465R-E/SFX can measure either one differential channel or two single-ended channels. According to the Microchip MCP3465R datasheet DS20006414C, differential operation is available for signals requiring common-mode rejection, while the dual single-ended configuration supports two related measurements in one compact converter package.
What is the operating temperature range of the MCP3465R-E/SFX?
The MCP3465R family is specified over an operating temperature range from -40 °C to +125 °C, as stated on the Microchip product page. This range supports industrial and instrumentation designs that must operate across extended ambient temperatures. Confirm the electrical limits and derating requirements against the manufacturer datasheet for the selected operating condition.
Where can I buy the MCP3465R-E/SFX online?
The MCP3465R-E/SFX can be requested through the Request a Quote form on this page. The form is the appropriate channel for checking current unit availability, production allocation, and the exact ordering configuration for the 12-UQFN package. Quote requests should include the required quantity, shipment destination, and preferred date code.
What is the price of the MCP3465R-E/SFX?
Current commercial terms for the MCP3465R-E/SFX are handled through the Request a Quote form on this page. Requesting a quote allows quantity, packing, date-code, and delivery requirements to be reviewed together. The structured pricing area on the page should be used for the current displayed commercial response rather than a static historical amount.
What is the lead time and stock status for the MCP3465R-E/SFX?
Current lead time, incoming factory stock, and available quantity for the MCP3465R-E/SFX should be confirmed through the Request a Quote form on this page. The manufacturer direct listing shown during product verification referenced incoming factory stock, but the quantity and timing can change. Include your required schedule when requesting the current allocation.
What is the best drop-in replacement for the MCP3465R-E/SFX?
No independently verified, pin-to-pin drop-in replacement for the MCP3465R-E/SFX was established in the available cross-reference information. The documented MCP3461R is similar but uses a larger package, so it is not footprint-compatible. Board changes, interface timing, resolution, channel configuration, and accuracy requirements must be reviewed before treating any device as a replacement.
What can replace the MCP3465R-E/SFX on the same PCB?
A same-PCB replacement requires the identical 12-UQFN footprint, compatible pin assignments, supply requirements, digital interface, and conversion performance. No alternative meeting all of those conditions was confirmed from the available cross-reference results. Use the MCP3465R manufacturer documentation to create a requirements checklist and request a confirmed drop-in match.
MCP3465R-E/SFX vs MCP3461R: which ADC is the better fit?
The MCP3465R-E/SFX is the better fit when a 2 mm by 2 mm package, two single-ended inputs or one differential input, and a maximum rate of 153.6 ksps are required. The MCP3461R is described as a similar one-channel differential device with equivalent performance and additional functionality, but its larger 3 mm by 3 mm or 6.4 mm by 6.4 mm packages prevent drop-in use.
When should I choose the MCP3465R-E/SFX over a larger ADC package?
Choose the MCP3465R-E/SFX when PCB area is constrained and the measurement fits its 16-bit resolution, 153.6 ksps maximum data rate, and dual-single-ended or differential input architecture. A larger ADC may be preferable when it offers a required interface, channel count, accuracy grade, or qualification that the MCP3465R does not provide, but that choice generally requires a different footprint.
Is the MCP3465R-E/SFX suitable for industrial sensor measurement?
The MCP3465R-E/SFX is suitable for many industrial sensor-measurement designs because it combines 16-bit resolution, programmable rates up to 153.6 ksps, differential-input capability, an internal reference, and an extended -40 °C to +125 °C family rating. Its 2 mm by 2 mm UQFN-12 package also supports compact instrumentation, although signal conditioning and EMC requirements remain application-specific.
What are the key specifications of the MCP3465R-E/SFX that engineers should know?
The key MCP3465R-E/SFX specifications are 16-bit resolution, delta-sigma architecture, programmable operation up to 153.6 ksps, two single-ended or one differential input, and a 2 mm by 2 mm UQFN-12 package. According to the Microchip MCP3465R datasheet DS20006414C, the device also integrates a voltage reference, oscillator, temperature sensor, and burnout-sensor detection.
What is the best Microchip equivalent for the MCP3465R-E/SFX?
The closest documented Microchip comparison is the MCP3461R, which offers equivalent performance with one differential or two single-ended inputs and additional functionality. However, the MCP3461R uses a larger 3 mm by 3 mm or 6.4 mm by 6.4 mm package, so it requires PCB and layout changes. The MCP3465R-E/SFX remains preferable when its compact 2 mm by 2 mm footprint is required.

داتای سەرچاوەی ئەندازیاری بۆ MCP3465R-E/SFX — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MCP3465R-E/SFX when the design needs a compact 2 mm by 2 mm 16-bit delta-sigma ADC with two single-ended inputs or one differential input and programmable operation up to 153.6 ksps. It is particularly attractive for space-constrained sensor and instrumentation products because the internal voltage reference, oscillator, temperature sensor, and burnout detection reduce external support circuitry. The MCP3461R may be considered when its additional functionality is required, but its larger documented packages mean it is not a same-PCB replacement. No verified footprint-compatible alternative was established, so a second-source strategy should begin with manufacturer cross-reference checks and a complete review of pinout, interface, timing, supply, accuracy, and acquisition requirements rather than assuming that similar ADC performance guarantees interchangeability.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Package 12-UQFN, 2 mm x 2 mm
Brand Microchip Technology
Resolution 16 bit
Architecture Delta-sigma
Maximum Data Rate 153.6 ksps
Input Configuration 1 differential channel or 2 single-ended channels
Internal Voltage Reference Integrated
Internal Oscillator Integrated
Temperature Sensor Integrated
Operating Temperature Range -40 °C to +125 °C

جیاکەرەوە سەرەکییەکان

  • Compact integrated conversion front end (بەراورد بەMCP3461R)
  • Flexible analog input arrangement (بەراورد بەMCP3461R)
  • Reduced external support-component count (بەراورد بەMCP3461R)

تێبینییەکانی دیزاین

Route the analog inputs as short and direct as possible, place input filtering close to the MCP3465R-E/SFX, and keep high-current switching paths away from the converter and reference return. The 2 mm by 2 mm UQFN-12 footprint makes small routing errors consequential. Use the manufacturer's land pattern and pin-description table as the controlling PCB references, including the exposed-pad connection and thermal-via arrangement.

Choose the conversion rate according to the signal bandwidth rather than automatically using 153.6 ksps. Delta-sigma digital filtering introduces frequency-dependent noise and latency, so oversampling and averaging should be evaluated as part of the signal-chain design. Add an anti-alias filter ahead of the analog inputs and verify its response at the selected conversion rate using the manufacturer characteristic curves.

Do not treat the MCP3461R as a drop-in substitute merely because its performance is described as equivalent. Its documented 3 mm by 3 mm or 6.4 mm by 6.4 mm packages do not match the MCP3465R-E/SFX footprint. A valid replacement must preserve the 12-UQFN land pattern, pin functions, supply levels, digital interface, and acquisition timing; otherwise a PCB redesign and firmware review are required.

The UQFN-12 package relies heavily on its pad and PCB copper for heat removal. Preserve the manufacturer's exposed-pad land pattern and place thermal vias where the footprint drawing specifies them. Avoid placing a keepout or copper disconnect beneath the package, and validate the final board under the highest expected ambient temperature, conversion rate, and analog-supply condition.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No explicit compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict minerals were stated in the manufacturer pages, datasheet excerpt, or distributor results reviewed for this product.

داتا پشتڕاستکراوەتەوە لە: 2026-11-20 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MCP3465R-E/SFX datasheet MCP3465R-E/SFX pinout MCP3465R-E/SFX datasheet pdf MCP3465R-E/SFX equivalent MCP3465R-E/SFX replacement MCP3465R-E/SFX cross reference MCP3465R-E/SFX price MCP3465R-E/SFX stock Microchip MCP3465R-E/SFX MCP3465R-E/SFX 153.6 ksps MCP3465R 2 mm x 2 mm UQFN-12 MCP3465R-E/SFX vs MCP3461R MCP3465R-E/SFX sensor measurement MCP3465R-E/SFX schematic MCP3465R-E/SFX footprint

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology MCP3465R-E/SFX MCP3465R MCP3465RT-E/SFX MCP3461R delta-sigma ADC analog-to-digital converter data-acquisition IC semiconductor 16-bit resolution 153.6 ksps differential input single-ended input internal voltage reference internal oscillator integrated temperature sensor burnout-sensor detection UQFN-12 QFN family surface-mount package industrial sensor acquisition process monitoring anti-alias filter common-mode rejection
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ