MCP3465R-E/SFX - 16-Bit Low-Noise ADC | Microchip
MPN: MCP3465R-E/SFX ✓ AktifMCP3465R-E/SFX Ringkasan
A delta-sigma ADC is a voltage regulator whose analog input is converted into a high-resolution digital stream by oversampling and digital filtering. It belongs to the ADC and data-acquisition hierarchy, where it sits between sensor or measurement signals and a digital microcontroller or processing system. The MCP3465R is designed for precision measurements that require low noise, programmable conversion speed, compact packaging, and a direct serial digital interface.
Key features include 16-bit resolution, a maximum programmable rate of 153.6 ksps, and support for either two single-ended inputs or one differential input. The internal reference and oscillator reduce system complexity, while the integrated temperature sensor and burnout-current detection support measurement integrity. The 2 mm by 2 mm UQFN-12 package is particularly useful in compact industrial, instrumentation, and embedded data-acquisition systems where board area is limited.
Operationally, the converter accepts analog voltages referenced to its supply and ground connections. Differential operation helps reject common-mode disturbances when measuring small sensor signals, while two single-ended inputs allow one device to serve two related measurements. The programmable data rate provides a practical balance between throughput, averaging, and noise performance, allowing the system architect to select an appropriate conversion rate for each measurement task.
Typical uses include industrial process monitoring, precision sensor acquisition, battery or laboratory instrumentation, and embedded measurement modules. The 153.6 ksps maximum rate supports relatively high-rate sampling, while the low-noise 16-bit architecture is useful when the measured quantity changes more slowly than the converter's maximum conversion capability.
Layout should prioritize short analog traces, a quiet ground reference, and placement of input and reference components close to the device. Because the UQFN package is only 2 mm by 2 mm, assembly planning, land-pattern verification, and thermal-path design require close attention. The manufacturer datasheet is the controlling reference for pin assignments, electrical limits, and recommended application circuits.
This product page combines the MCP3465R family specifications with package information, sourcing guidance, practical design notes, and a conservative drop-in assessment. It distinguishes documented functions from unavailable channel-specific details and avoids presenting functionally similar devices as footprint-compatible replacements.
Alternatif penggantian untuk MCP3465R-E/SFX — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifMCP3465R-E/SFX Rating Maksimal & Karakteristik Listrik
| Resolusi | 16 bit |
| Architecture | Delta-sigma |
| Maximum Data Rate | 153.6 ksps |
| Input Configuration | 1 differential channel or 2 single-ended channels |
| Internal Voltage Reference | Integrated |
| Internal Oscillator | Integrated |
| Temperature Sensor | Integrated |
| Burnout Sensor Detection | Integrated |
| Paket | 12-UQFN, 2 mm x 2 mm |
| Tipe Mounting | Surface mount |
| Rentang Suhu Kerja | -40 °C to +125 °C |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
MCP3465R-E/SFX 12-uqfn, 2 mm x 2 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk MCP3465R-E/SFX (12-uqfn, 2 mm x 2 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk MCP3465R-E/SFX.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MCP3465R-E/SFX cocok untuk 6 aplikasis: Industrial Sensor Acquisition, Precision Process Monitoring, Laboratory Instrumentation, Battery-Powered Measurement, Environmental Monitoring, Embedded Data Acquisition.
Industrial Sensor Acquisition
The MCP3465R-E/SFX fits compact industrial sensor modules that require higher resolution than a low-resolution measurement ADC while keeping the converter area small. Its 16-bit delta-sigma architecture supports one differential channel or two single-ended channels, and the programmable rate can reach 153.6 ksps. Differential operation is useful when the sensor output is small and susceptible to common-mode noise. The integrated voltage reference, oscillator, and temperature sensor reduce the number of external support components. Design the analog input path with short traces, a stable reference return, and filtering matched to the sensor bandwidth. The principal trade-off is that the 2 mm by 2 mm UQFN-12 footprint requires careful assembly planning and makes pin assignment verification especially important.
Direkomendasikan
Precision Process Monitoring
The MCP3465R-E/SFX is appropriate for process-monitoring equipment that measures slow or moderate-rate analog signals with a compact, high-resolution converter. A 16-bit delta-sigma ADC can provide useful numerical resolution, while the programmable data rate up to 153.6 ksps allows the designer to reduce conversion activity when measuring slowly changing process variables. Two single-ended inputs can monitor two related signals, or the device can operate in differential mode when common-mode rejection is important. Its integrated reference and oscillator help minimize board area and external component count. Input filtering, electrical range matching, calibration, and grounding remain essential. The compact UQFN-12 package supports dense instrumentation, but the design must preserve analog signal quality from the sensor through the converter.
Direkomendasikan
Laboratory Instrumentation
The MCP3465R-E/SFX can serve as the measurement front end in compact laboratory instruments that need multiple input configurations without occupying substantial PCB area. The converter provides two single-ended channels or one differential channel at up to 153.6 ksps, enabling it to handle sensor bridges, transducers, or buffered voltage inputs. Differential operation is especially valuable when the measured signal is smaller than the common-mode voltage present on the input pair. Integrated reference and oscillator functions simplify instrument design, while burnout detection can assist with input-fault diagnosis. Engineers should budget adequate acquisition time, apply anti-alias filtering based on the selected data rate, and verify the converter's electrical limits against the front-end range. Its small package helps reduce instrument footprint without removing the need for careful layout.
Direkomendasikan
Battery-Powered Measurement
The MCP3465R-E/SFX is suitable for battery-powered condition-monitoring systems where a low-noise 16-bit converter and compact 2 mm by 2 mm package help balance measurement performance with board area. Its two single-ended inputs can reduce the number of separate converters needed for related battery, temperature, or load measurements. The integrated voltage reference and oscillator can also reduce external component count, while the programmable data rate provides flexibility when prioritizing conversion throughput versus energy use. The product's -40 °C to +125 °C family temperature specification covers demanding environments, but the complete system still requires a regulated supply and careful analog grounding. Verify current consumption, duty-cycle behavior, and start-up requirements in the manufacturer datasheet before finalizing the power budget.
Direkomendasikan
Environmental Monitoring
The MCP3465R-E/SFX is well matched to compact environmental monitoring nodes that digitize outputs from chemical, gas, moisture, or other analog sensors. Two single-ended inputs allow the node to service two sensing channels, while differential operation can improve measurement integrity when the sensor output is referenced to a nonzero common-mode voltage. The converter's programmable rate up to 153.6 ksps accommodates both slow environmental trends and faster sensor transients. Integration of a voltage reference, oscillator, and temperature sensor reduces auxiliary component requirements. Because the package is only 2 mm by 2 mm, PCB assembly and the exposed-pad thermal connection require careful planning. The analog section should be isolated from noisy digital activity, and input filters should be selected to prevent out-of-band energy from affecting the measurement result.
Direkomendasikan
Embedded Data Acquisition
The MCP3465R-E/SFX is useful in embedded data-acquisition modules that need a compact, noise-conscious ADC paired with a digital controller. Its 16-bit delta-sigma conversion, maximum programmable rate of 153.6 ksps, and internal reference and oscillator reduce external circuitry and software setup. The controller can select the required conversion rate according to the workload, while dual single-ended inputs provide flexibility for shared sensing channels. Differential mode supports lower-noise acquisition from bridge or current-sense outputs. Layout should keep analog routing short, place filtering near the converter, and maintain a low-impedance return path to reduce coupling from digital clocks and switching nodes. Verify the serial interface timing and required digital supply levels from the manufacturer datasheet before assigning microcontroller pins or peripheral routing.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MCP3465R-E/SFX — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Package | 12-UQFN, 2 mm x 2 mm |
| Brand | Microchip Technology |
| Resolution | 16 bit |
| Architecture | Delta-sigma |
| Maximum Data Rate | 153.6 ksps |
| Input Configuration | 1 differential channel or 2 single-ended channels |
| Internal Voltage Reference | Integrated |
| Internal Oscillator | Integrated |
| Temperature Sensor | Integrated |
| Operating Temperature Range | -40 °C to +125 °C |
Diferensiator Kunci
- Compact integrated conversion front end (vsMCP3461R)
- Flexible analog input arrangement (vsMCP3461R)
- Reduced external support-component count (vsMCP3461R)
Catatan Desain
Route the analog inputs as short and direct as possible, place input filtering close to the MCP3465R-E/SFX, and keep high-current switching paths away from the converter and reference return. The 2 mm by 2 mm UQFN-12 footprint makes small routing errors consequential. Use the manufacturer's land pattern and pin-description table as the controlling PCB references, including the exposed-pad connection and thermal-via arrangement.
Choose the conversion rate according to the signal bandwidth rather than automatically using 153.6 ksps. Delta-sigma digital filtering introduces frequency-dependent noise and latency, so oversampling and averaging should be evaluated as part of the signal-chain design. Add an anti-alias filter ahead of the analog inputs and verify its response at the selected conversion rate using the manufacturer characteristic curves.
Do not treat the MCP3461R as a drop-in substitute merely because its performance is described as equivalent. Its documented 3 mm by 3 mm or 6.4 mm by 6.4 mm packages do not match the MCP3465R-E/SFX footprint. A valid replacement must preserve the 12-UQFN land pattern, pin functions, supply levels, digital interface, and acquisition timing; otherwise a PCB redesign and firmware review are required.
The UQFN-12 package relies heavily on its pad and PCB copper for heat removal. Preserve the manufacturer's exposed-pad land pattern and place thermal vias where the footprint drawing specifies them. Avoid placing a keepout or copper disconnect beneath the package, and validate the final board under the highest expected ambient temperature, conversion rate, and analog-supply condition.
Informasi Konformitas
No explicit compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict minerals were stated in the manufacturer pages, datasheet excerpt, or distributor results reviewed for this product.