MCP601-I/P - 2.8MHz Low-Power RRIO Op Amp | Microchip
MPN: MCP601-I/P ✓ چالاکMCP601-I/P گشتی
An operational amplifier is an analog signal-conditioning integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs while providing high open-loop gain and low output impedance. The MCP601 belongs to the CMOS operational-amplifier hierarchy, combining low bias current, high speed, high open-loop gain, and rail-to-rail output swing in a general-purpose device intended for industrial process control and low-power portable systems.
Key characteristics include a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, rail-to-rail output capability, and low input bias current enabled by Microchip's advanced CMOS process. The single-supply operating range of 2.7 V to 5.5 V makes the device suitable for battery-operated equipment, portable instrumentation, and low-voltage industrial control systems. The -I temperature grade identifies the industrial-temperature version.
The rail-to-rail output stage allows the output to approach the supply rails under light load, which is useful in single-supply systems where conventional bipolar output stages lose linearity near either rail. Input common-mode range, input offset voltage, slew rate, open-loop gain, input bias current, and noise specifications must be checked against the manufacturer datasheet for the exact operating voltage and configuration.
Typical uses include low-power sensor conditioning, process-control loops, data-acquisition front ends, portable test equipment, and low-end audio signal paths. Its 8-pin PDIP format is also convenient for prototyping, educational builds, and through-hole assemblies where a surface-mount package would be inconvenient.
Designers should verify stability with the selected feedback network, account for capacitive loading, and provide adequate bypass capacitance near the supply pins. Because the MCP601-I/P is a through-hole industrial-grade variant, engineers changing to a surface-mount production version should confirm pin order, temperature grade, and full electrical equivalence rather than assuming only the family name is equivalent.
This page combines manufacturer specifications, distributor sourcing information, package details, application guidance, and honest drop-in replacement analysis that are not consolidated in a single manufacturer product-page summary.
جێگرەوەکانی جێگۆڕکێ بۆ MCP601-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MCP601-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Typical Operating Current, Mounting Type, Package, Supply Voltage Range, Product Type.
MCP601-I/SN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MCP601-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Single CMOS operational amplifier |
| Amplifier Configuration | Single circuit |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Single-Supply Operation | Yes |
| Gain-Bandwidth Product | 2.8 MHz |
| Typical Operating Current | 230 uA per amplifier |
| Output Swing | Rail-to-rail |
| Typical Input Offset Voltage | Less than 2 mV |
| جۆری دەرچوون | Rail-to-rail output |
| پاکێج | 8-pin PDIP |
| جۆری دامەزراندن | Through-hole |
| Temperature Grade | Industrial (-I) |
ڕێکخستنی پینی MCP601-I/P
| پین 1 | NC — Not connected (per datasheet) |
| پین 2 | IN- — Inverting input |
| پین 3 | IN+ — Non-inverting input |
| پین 4 | V- — Negative supply or ground connection |
| پین 5 | OUT — Analog output |
| پین 6 | V+ — Positive supply input |
| پین 7 | NC — Not connected (per datasheet) |
| پین 8 | NC — Not connected (per datasheet) |
بەکارهێنانە باوەکان
MCP601-I/P گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Conditioning, Industrial Process-Control Loops, Portable Data-Acquisition Front End, Low-End Audio Input Amplification, Test and Measurement Buffering, Portable Equipment and Embedded Controls.
Battery-Powered Sensor Conditioning
The MCP601-I/P fits low-voltage sensor front ends because it operates from a 2.7 V single supply and consumes 230 uA typical current per amplifier. It can provide gain and buffering between a high-impedance sensor and an ADC input while preserving usable output range with its rail-to-rail output stage. The 2.8 MHz gain-bandwidth product also provides more bandwidth than many low-power general-purpose amplifiers. For battery systems, the sensor's own current, bias-resistor current, and ADC reference behavior may dominate the final power budget, so those loads must be evaluated separately.
پێشنیارکراو
Industrial Process-Control Loops
The MCP601-I/P is appropriate for general-purpose industrial process-control signal paths where a single low-power amplifier is sufficient. Its 2.7 V to 5.5 V supply range and 2.8 MHz gain-bandwidth product support 3.3 V and 5 V control electronics, while the industrial -I grade identifies the intended temperature class. The amplifier can buffer a transducer output, amplify a small error signal, or drive an ADC input. Verify the input common-mode range and output-load conditions at the actual supply voltage, because the rail-to-rail specification applies specifically to the output stage.
پێشنیارکراو
Portable Data-Acquisition Front End
The MCP601-I/P can serve as the first gain or buffer stage in a compact data-acquisition system. Its low typical operating current of 230 uA limits amplifier overhead in portable instruments, while 2.8 MHz gain bandwidth is adequate for many low-frequency sensor measurements. Place the amplifier close to the protected input and the ADC reference network to minimize noise pickup. Because the MCP601-I/P is a general-purpose amplifier rather than a dedicated instrumentation amplifier, offset, drift, noise, and common-mode rejection must be evaluated against the measurement accuracy required by the test equipment.
پێشنیارکراو
Low-End Audio Input Amplification
The MCP601-I/P is usable in low-end audio paths, which the manufacturer lists among the MCP601 family's intended applications. The rail-to-rail output improves swing utilization on a single 3.3 V or 5 V supply, and the 2.8 MHz gain-bandwidth product provides adequate bandwidth for many voice-band and general audio conditioning stages. It is not positioned as a low-noise headphone amplifier, so the exact input-voltage and output-noise figures should be checked before demanding studio-grade performance. Follow the manufacturer's gain and stability guidance at the required closed-loop gain.
پێشنیارکراو
Test and Measurement Buffering
The MCP601-I/P is a practical choice for buffering and gain stages in low-cost test equipment because it combines a 2.8 MHz gain-bandwidth product with low 230 uA typical current. It can isolate a source impedance before an ADC, scale a reference voltage, or drive a measurement input at a modest closed-loop gain. The 8-pin PDIP format is particularly convenient for prototypes and educational instruments where reworkability is valuable. For precision measurement, verify input bias current, offset voltage, drift, and noise in the manufacturer datasheet rather than assuming the general-purpose ratings meet metrology requirements.
پێشنیارکراو
Portable Equipment and Embedded Controls
The MCP601-I/P suits portable equipment and embedded-control designs that operate from a 2.7 V to 5.5 V rail and need one general-purpose analog channel. The low typical current of 230 uA per amplifier reduces overhead, while the through-hole 8-pin PDIP package simplifies prototyping and hand assembly. It can amplify a control feedback, buffer a potentiometer, or condition an incoming logic-interface analog signal. A microcontroller-based implementation should still check ADC input range, grounding, and whether the amplifier's output can settle within the conversion interval.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MCP601-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MCP601-I/SN |
|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP listing; -SN ordering code normally denotes SOIC, so mechanical fit must be verified |
| Brand | Microchip Technology | Microchip Technology |
| Amplifier Count | 1 circuit | 1 circuit |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Gain-Bandwidth Product | 2.8 MHz | 2.8 MHz |
| Typical Operating Current | 230 uA per amplifier | 230 uA per amplifier |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Typical Offset Voltage | Less than 2 mV | Less than 2 mV |
| Temperature Grade | Industrial (-I) | Industrial (-I) |
جیاکەرەوە سەرەکییەکان
- Single-amplifier configuration avoids unused channels (بەراورد بەMCP602-I/SN)
- Low-power operation from a 2.7 V single rail (بەراورد بەLM324D)
- Rail-to-rail output improves single-supply headroom utilization (بەراورد بەMC1458D)
تێبینییەکانی دیزاین
Budget the MCP601-I/P supply current as at least 230 uA typical per amplifier at the manufacturer's stated 5 V test condition. Add the divider, bias, and load currents before sizing the supply. Because the device is specified down to 2.7 V, verify that the selected regulator can start and remain within tolerance at that minimum voltage; a nominal 3.3 V rail may droop low enough to compromise headroom during pulsed loads.
Place the supply bypass capacitor and the amplifier's ground return close to the device instead of routing the sensitive input across the board. Keep the inverting input and feedback trace short because parasitic capacitance at high closed-loop gain can affect stability. If the source has high impedance, guard or shield the input lead and verify settling with the actual source impedance and cable capacitance rather than relying only on the nominal gain-bandwidth product.
Do not substitute an SOIC or dual-amplifier variant for the PDIP MCP601-I/P without checking the footprint and channel count. Rail-to-rail output does not mean the input common-mode range covers both rails, and the family-level 2.8 MHz gain-bandwidth figure is a small-signal bandwidth rather than a guarantee of output swing at 5 V or above. For a PCB conversion, verify every pin, the temperature code, and the replacement part's load drive.
زانیاری پابەندبوون
The verified excerpts identify the industrial -I grade and the PDIP package but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. AEC-Q100 is not applicable because this is an industrial-grade analog amplifier rather than an automotive-qualified device.