MSP430F2013TPW - 16MHz Low-Power MCU | Texas Instruments
MPN: MSP430F2013TPW ✓ چالاکMSP430F2013TPW گشتی
A mixed-signal microcontroller combines a digital microcontroller core with analog measurement or communication peripherals on one device. The MSP430 is an ultra-low-power MCU family based on a 16-bit RISC architecture. Within the semiconductor hierarchy, MSP430F2013 belongs to the MSP430 mixed-signal microcontroller family and provides a compact platform for sensor acquisition, low-power instrumentation, and small control systems.
The MSP430F2013TPW combines a 16 MHz CPU16 core with 2 KB of Flash and 128 bytes of RAM. Its 16-bit sigma-delta ADC supports analog sensing, while the USI provides flexible serial communication for SPI or I2C peripherals. The -40°C to 105°C temperature range suits industrial equipment, and the 14-pin TSSOP package supports compact surface-mount PCB layouts.
Its mixed-signal architecture reduces the number of separate components required in a measurement system. The ADC can acquire sensor signals, while firmware can process the results and communicate through the USI. Five low-power operating modes help the MCU control energy use during idle and standby intervals, making the device appropriate for battery-powered and duty-cycled sensing products.
Typical uses include portable environmental monitors, industrial process sensors, low-cost instrumentation, smart sensor nodes, and compact control modules. The combination of a 16-bit ADC, serial interface, low-power architecture, and 3.3 V operation is especially useful when a design needs local measurement and short-range serial connectivity without a larger mixed-signal MCU package.
When laying out the circuit, follow the pin-description and recommended application circuits in the Texas Instruments MSP430F20x1, MSP430F20x2 and MSP430F20x3 datasheet. Keep analog and digital return paths separated, provide the required bypass capacitance close to the supply pins, and validate ADC accuracy with the intended sensor and signal-conditioning network.
This product page combines the exact ordering information, interface capabilities, package details, selection guidance, practical design notes, and technically constrained drop-in alternatives for engineers evaluating the MSP430F2013TPW for compact, low-power sensing designs.
جێگرەوەکانی جێگۆڕکێ بۆ MSP430F2013TPW — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MSP430F2013TPW (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە CPU Architecture, Package, Operating Temperature Range, Serial Interface, Timer.
MSP430F2013IPW
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MSP430F2012IPW
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MSP430F2011IPW
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MSP430F2002IPW
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MSP430F2001IPW
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MSP430F2013TPW زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| CPU Architecture | MSP430 CPU16, 16-bit RISC |
| زۆرترین فرێکوێنسیی کاتژمێر | 16 MHz |
| Flash Memory | 2 KB |
| RAM | 128 B |
| ADC Resolution | 16 bit |
| ADC Architecture | 1 sigma-delta ADC |
| Serial Interface | USI supporting SPI and I2C |
| ڤۆڵتیەی دابینکردن | 2.5 V or 3.3 V |
| مەودای پلەی گەرمیی کارکردن | -40°C to +105°C |
| پاکێج | 14-pin TSSOP (PW) |
| ژمارەی پین | 14 pins |
| جۆری دامەزراندن | Surface mount |
| Low-Power Modes | 5 modes |
| Program Memory Architecture | 2 KB (2K x 8 + 256B) Flash |
| Processor Core | 16-bit MSP430 CPU |
ڕێنمایی ڕێکخستنی پینی MSP430F2013TPW 14-pin tssop (pw)
ڕێکخستنی پین بۆ MSP430F2013TPW (پاکێجی 14-pin tssop (pw)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MSP430F2013TPW.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MSP430F2013TPW گونجاوە بۆ 6 بەکارھێنانs: Portable Environmental Sensor, Industrial Process Sensor, Battery-Powered Data Logger, Low-Cost Measurement Instrument, Smart Sensor Node, Compact Control Module.
Portable Environmental Sensor
The MSP430F2013TPW fits a portable environmental sensor because it combines a 16 MHz CPU16 core, 128 bytes of RAM, one 16-bit sigma-delta ADC, and USI support for SPI or I2C in a 14-pin TSSOP. The ADC can acquire a conditioned environmental sensor signal while the USI connects a digital temperature, humidity, or pressure sensor. Five low-power operating modes support duty-cycled measurements where the MCU remains inactive between samples. Designers should choose a low-leakage regulator and sensor whose standby and conversion currents fit the battery budget, while sizing firmware storage around the 2 KB Flash limit.
پێشنیارکراو
Industrial Process Sensor
The MSP430F2013TPW is appropriate for compact industrial process monitoring when a low-voltage sensor interface must operate from -40°C to 105°C. Its 16-bit sigma-delta ADC can digitize a conditioned bridge, thermistor, or low-frequency process signal, while the USI provides SPI or I2C connectivity to a local sensor or local display. The 14-pin TSSOP footprint simplifies integration into compact instrumentation. For industrial deployment, verify ADC input range and settling behavior, isolate analog and digital return currents, and account for the limited 128 bytes of RAM when buffering samples.
پێشنیارکراو
Battery-Powered Data Logger
The MSP430F2013TPW supports a duty-cycled battery-powered data logger by combining five low-power modes with a 16 MHz processing core and a 16-bit ADC. Firmware can wake the MCU, acquire a sensor reading, convert or summarize the value, transfer it through the SPI or I2C-capable USI, and return to a low-power state. The 128-byte RAM is sufficient for short acquisition windows but not large offline buffers, so logs should be streamed or stored in external memory. Power-budget calculations should include the MCU, sensor, regulator, and serial peripheral currents over both active and sleep intervals.
پێشنیارکراو
Low-Cost Measurement Instrument
The MSP430F2013TPW can serve as the control and measurement core of a compact, low-cost instrument such as a handheld meter or laboratory logger. Its 16-bit sigma-delta ADC captures low-bandwidth analog measurements, the 16-bit CPU handles scaling and calibration, and the USI connects a display, memory, or external converter through SPI or I2C. A 2.5 V or 3.3 V supply simplifies integration with common embedded rails. Because Flash is limited to 2 KB and RAM to 128 bytes, keep the application focused and move display buffering, complex math, or extensive calibration tables to external components when required.
پێشنیارکراو
Smart Sensor Node
The MSP430F2013TPW suits a smart sensor node that must combine local analog measurement with a compact serial connection. The 16-bit ADC handles the sensor channel, while the configurable USI supports SPI or I2C for a remote sensor, local storage, or actuator. Five low-power modes let the node remain mostly idle between control updates, and the 14-pin TSSOP package preserves board area for small enclosures. Confirm that the chosen protocol, pull-up or clock requirements, and peripheral current levels are compatible with the intended power architecture, and keep firmware within the 2 KB Flash constraint.
پێشنیارکراو
Compact Control Module
The MSP430F2013TPW can serve as the control element in a compact actuator or condition-monitoring module. The 16 MHz CPU16 core provides deterministic control processing, the USI communicates with external sensors or drivers, and the ADC monitors an analog feedback signal. Its 14-pin TSSOP package is useful where connector and component space is restricted. The 128-byte RAM limits sophisticated buffering or multiple protocol stacks, so use a direct control architecture and keep the USI assigned to one essential peripheral family. Validate input thresholds, timing margins, and power behavior across the full -40°C to 105°C operating range.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MSP430F2013TPW — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MSP430F2013IPW | MSP430F2012IPW | MSP430F2011IPW | MSP430F2002IPW | MSP430F2001IPW |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) |
| CPU Architecture | 16-bit MSP430 CPU16 RISC | 16-bit MSP430 CPU16 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC |
جیاکەرەوە سەرەکییەکان
- Target order code combines the extended-range configuration with tube packaging (بەراورد بەMSP430F2013IPW)
- Larger memory allocation than lower-resource MSP430F20x family alternatives (بەراورد بەMSP430F2012IPW)
- Dedicated 16-bit sigma-delta measurement channel (بەراورد بەMSP430F2001IPW)
- Configurable USI supports two common embedded serial buses (بەراورد بەMSP430F2002IPW)
تێبینییەکانی دیزاین
Calculate the complete power budget by separating active and low-power intervals for the MCU, ADC front end, USI peripherals, regulator, and sensor. The MSP430F2013TPW operates from 2.5 V or 3.3 V and supports five low-power modes, but the system battery life is determined by the highest-current path and by how long the device remains awake. Use the manufacturer sleep-current figures and application timing to calculate average consumption, then include regulator quiescent current because it can dominate a low-duty-cycle design.
Follow the recommended decoupling and analog-layout practices in the manufacturer datasheet. Place the required supply capacitor close to the VCC pin, provide a short return path to the device ground, and keep the sigma-delta ADC input trace away from switching nodes and high-current digital returns. Use a quiet analog ground region when the sensor front end requires it, and verify the complete signal path with the intended source impedance. Analog grounding should be evaluated systematically rather than by adding an arbitrary connection between ground planes.
Do not assume that every MSP430F20x device with a 14-pin PW package is firmware-compatible. Before substituting an F2012, F2011, F2002, or F2001 variant, compare the pin table, Flash size, RAM size, ADC resources, USI behavior, interrupt vector layout, and clock requirements. Also check the clock source and external-component requirements in the device-specific datasheet. A successful flash download is not sufficient proof of equivalence because peripheral initialization and memory assumptions may differ.
Treat the USI connections as a shared peripheral resource and assign their pins consistently for either SPI or I2C operation. For I2C, include the pull-up arrangement required by the bus voltage, topology, and sink current. For SPI, define clock polarity and phase in firmware and keep the clock trace short where the connected device supports the intended rate. Because the same USI can serve multiple protocols, confirm that mode changes, sleep transitions, and peripheral connections do not leave the interface in an inconsistent state.
زانیاری پابەندبوون
The verified product information does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. The TPW operating range of -40°C to 105°C does not by itself establish AEC-Q100 qualification.