Texas Instruments

MSP430F2013TPW - 16MHz Low-Power MCU | Texas Instruments

Артикул: MSP430F2013TPW ✓ Активен
2.5 V or 3.3 V Vdss 14-pin TSSOP (PW) Package 16 MHz Speed 2 KB Memory
MOQ: 1 |

MSP430F2013TPW Обзор

The Texas Instruments MSP430F2013TPW is a 16-bit mixed-signal microcontroller operating at up to 16 MHz, with 2 KB of Flash memory and 128 bytes of RAM. It includes one 16-bit sigma-delta ADC and a Universal Serial Interface supporting SPI and I2C, and is packaged in a 14-pin TSSOP (PW). The device is designed for low-power sensing and embedded measurement systems operating from a 2.5 V or 3.3 V supply.

A mixed-signal microcontroller combines a digital microcontroller core with analog measurement or communication peripherals on one device. The MSP430 is an ultra-low-power MCU family based on a 16-bit RISC architecture. Within the semiconductor hierarchy, MSP430F2013 belongs to the MSP430 mixed-signal microcontroller family and provides a compact platform for sensor acquisition, low-power instrumentation, and small control systems.

The MSP430F2013TPW combines a 16 MHz CPU16 core with 2 KB of Flash and 128 bytes of RAM. Its 16-bit sigma-delta ADC supports analog sensing, while the USI provides flexible serial communication for SPI or I2C peripherals. The -40°C to 105°C temperature range suits industrial equipment, and the 14-pin TSSOP package supports compact surface-mount PCB layouts.

Its mixed-signal architecture reduces the number of separate components required in a measurement system. The ADC can acquire sensor signals, while firmware can process the results and communicate through the USI. Five low-power operating modes help the MCU control energy use during idle and standby intervals, making the device appropriate for battery-powered and duty-cycled sensing products.

Typical uses include portable environmental monitors, industrial process sensors, low-cost instrumentation, smart sensor nodes, and compact control modules. The combination of a 16-bit ADC, serial interface, low-power architecture, and 3.3 V operation is especially useful when a design needs local measurement and short-range serial connectivity without a larger mixed-signal MCU package.

When laying out the circuit, follow the pin-description and recommended application circuits in the Texas Instruments MSP430F20x1, MSP430F20x2 and MSP430F20x3 datasheet. Keep analog and digital return paths separated, provide the required bypass capacitance close to the supply pins, and validate ADC accuracy with the intended sensor and signal-conditioning network.

This product page combines the exact ordering information, interface capabilities, package details, selection guidance, practical design notes, and technically constrained drop-in alternatives for engineers evaluating the MSP430F2013TPW for compact, low-power sensing designs.

Аналоги без доработки для MSP430F2013TPW — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

MSP430F2013IPW

✅ Прямая замена ⚠️ Характеристики не проверены
📦 14-TSSOP (PW)
Same MSP430F2013 family and 14-pin PW footprint; IPW identifies a different industrial-temperature ordering option, while the TPW order code specifies tube packaging

📋 Справочный аналог (нет в каталоге)

MSP430F2012IPW

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 14-TSSOP (PW)
16-bit RISC · 16 MHz · 125 ns · 2 KB · 128 bytes · 10 bits · I2C and SPI · Yes

Уточнить цену

Открыть даташит →

MSP430F2011IPW

✅ Прямая замена ⚠️ Характеристики не проверены
📦 14-TSSOP (PW)
Same 14-pin MSP430F20x footprint, but F2011 has lower memory resources than F2013 and requires firmware-capacity verification

📋 Справочный аналог (нет в каталоге)

MSP430F2002IPW

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 14-TSSOP (PW)
16-bit ultra-low-power mixed-signal microcontroller · 16 MHz · 16-bit RISC · 16 bit · 1 KB · 128 B · 10 bit · 1 integrated comparator

Уточнить цену

Открыть даташит →

MSP430F2001IPW

✅ Прямая замена ⚠️ Характеристики не проверены
📦 14-TSSOP (PW)
Same 14-pin MSP430F20x footprint, but F2001 has a lower memory budget and different ADC or peripheral resources than F2013

📋 Справочный аналог (нет в каталоге)

MSP430F2013TPW Максимальные параметры и электрические характеристики

CPU Architecture MSP430 CPU16, 16-bit RISC
Максимальная тактовая частота 16 MHz
Flash Memory 2 KB
RAM 128 B
ADC Resolution 16 bit
ADC Architecture 1 sigma-delta ADC
Serial Interface USI supporting SPI and I2C
Напряжение питания 2.5 V or 3.3 V
Диапазон рабочих температур -40°C to +105°C
Корпус 14-pin TSSOP (PW)
Число выводов 14 pins
Тип монтажа Surface mount
Low-Power Modes 5 modes
Program Memory Architecture 2 KB (2K x 8 + 256B) Flash
Processor Core 16-bit MSP430 CPU

Руководство по цоколевке MSP430F2013TPW в корпусе 14-pin tssop (pw)

Цоколевка для MSP430F2013TPW (корпус 14-pin tssop (pw)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 14-pin tssop (pw) для MSP430F2013TPW

Нет подробных данных о распиновке для MSP430F2013TPW.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MSP430F2013TPW подходит для 6 применениеs: Portable Environmental Sensor, Industrial Process Sensor, Battery-Powered Data Logger, Low-Cost Measurement Instrument, Smart Sensor Node, Compact Control Module.

🧩

Portable Environmental Sensor

The MSP430F2013TPW fits a portable environmental sensor because it combines a 16 MHz CPU16 core, 128 bytes of RAM, one 16-bit sigma-delta ADC, and USI support for SPI or I2C in a 14-pin TSSOP. The ADC can acquire a conditioned environmental sensor signal while the USI connects a digital temperature, humidity, or pressure sensor. Five low-power operating modes support duty-cycled measurements where the MCU remains inactive between samples. Designers should choose a low-leakage regulator and sensor whose standby and conversion currents fit the battery budget, while sizing firmware storage around the 2 KB Flash limit.

🏭

Industrial Process Sensor

The MSP430F2013TPW is appropriate for compact industrial process monitoring when a low-voltage sensor interface must operate from -40°C to 105°C. Its 16-bit sigma-delta ADC can digitize a conditioned bridge, thermistor, or low-frequency process signal, while the USI provides SPI or I2C connectivity to a local sensor or local display. The 14-pin TSSOP footprint simplifies integration into compact instrumentation. For industrial deployment, verify ADC input range and settling behavior, isolate analog and digital return currents, and account for the limited 128 bytes of RAM when buffering samples.

🔋

Battery-Powered Data Logger

The MSP430F2013TPW supports a duty-cycled battery-powered data logger by combining five low-power modes with a 16 MHz processing core and a 16-bit ADC. Firmware can wake the MCU, acquire a sensor reading, convert or summarize the value, transfer it through the SPI or I2C-capable USI, and return to a low-power state. The 128-byte RAM is sufficient for short acquisition windows but not large offline buffers, so logs should be streamed or stored in external memory. Power-budget calculations should include the MCU, sensor, regulator, and serial peripheral currents over both active and sleep intervals.

🔧

Low-Cost Measurement Instrument

The MSP430F2013TPW can serve as the control and measurement core of a compact, low-cost instrument such as a handheld meter or laboratory logger. Its 16-bit sigma-delta ADC captures low-bandwidth analog measurements, the 16-bit CPU handles scaling and calibration, and the USI connects a display, memory, or external converter through SPI or I2C. A 2.5 V or 3.3 V supply simplifies integration with common embedded rails. Because Flash is limited to 2 KB and RAM to 128 bytes, keep the application focused and move display buffering, complex math, or extensive calibration tables to external components when required.

🌐

Smart Sensor Node

The MSP430F2013TPW suits a smart sensor node that must combine local analog measurement with a compact serial connection. The 16-bit ADC handles the sensor channel, while the configurable USI supports SPI or I2C for a remote sensor, local storage, or actuator. Five low-power modes let the node remain mostly idle between control updates, and the 14-pin TSSOP package preserves board area for small enclosures. Confirm that the chosen protocol, pull-up or clock requirements, and peripheral current levels are compatible with the intended power architecture, and keep firmware within the 2 KB Flash constraint.

⚙️

Compact Control Module

The MSP430F2013TPW can serve as the control element in a compact actuator or condition-monitoring module. The 16 MHz CPU16 core provides deterministic control processing, the USI communicates with external sensors or drivers, and the ADC monitors an analog feedback signal. Its 14-pin TSSOP package is useful where connector and component space is restricted. The 128-byte RAM limits sophisticated buffering or multiple protocol stacks, so use a direct control architecture and keep the USI assigned to one essential peripheral family. Validate input thresholds, timing margins, and power behavior across the full -40°C to 105°C operating range.

What is the MSP430F2013TPW and what are its key specifications?
The MSP430F2013TPW is a Texas Instruments 16-bit mixed-signal microcontroller rated up to 16 MHz, with 2 KB of Flash memory, 128 bytes of RAM, one 16-bit sigma-delta ADC, and USI support for SPI or I2C. According to the Texas Instruments MSP430F2013 product page, the device is offered in a 14-pin TSSOP (PW) package for a 2.5 V or 3.3 V supply. Its five low-power operating modes make it suitable for compact, duty-cycled sensing equipment that must measure analog signals and exchange data with external peripherals.
Where can I download the MSP430F2013TPW datasheet PDF?
The official MSP430F2013 datasheet PDF is available through Texas Instruments at https://www.ti.com/lit/gpn/MSP430F2013. It belongs to the MSP430F20x1, MSP430F20x2 and MSP430F20x3 mixed-signal microcontroller datasheet and includes the complete device description, electrical characteristics, pin descriptions, and application information. For the exact TPW ordering configuration, also use the MSP430F2013 product page at https://www.ti.com/product/MSP430F2013. The TPW suffix identifies the 14-pin TSSOP package and temperature option.
Where can I find the MSP430F2013TPW pinout and package drawing?
The MSP430F2013TPW pinout is published in the pin-configuration section of the Texas Instruments MSP430F20x1, MSP430F20x2 and MSP430F20x3 mixed-signal microcontroller datasheet. The official product details identify the device as a 14-pin TSSOP in the PW package. Use the package drawing and pin-description table together when assigning PCB nets, especially around power, ground, analog inputs, and the USI signals. The package has 14 pins, so the pin list must contain all 14 positions rather than treating it as a smaller surface-mount package.
Is the MSP430F2013TPW suitable for low-voltage battery-powered sensors?
The MSP430F2013TPW is suitable for low-voltage, duty-cycled sensor designs because it operates from 2.5 V or 3.3 V and provides five low-power operating modes. The Texas Instruments product description identifies it as a 16 MHz sensing MCU with a 16-bit sigma-delta ADC and 128 bytes of RAM. Its limited RAM favors small control loops and sequential measurement tasks, while the ADC can reduce the need for a separate analog-to-digital converter. Final battery-life calculations should include the selected sensor, regulator quiescent current, and the duration of each active measurement interval.
What serial interfaces does the MSP430F2013TPW provide?
The MSP430F2013TPW provides one Universal Serial Interface, or USI, that can be configured for SPI or I2C operation. Texas Instruments describes the device as a sensing MCU with USI support for these two serial protocols. The USI is useful for connecting temperature sensors, memory, displays, converters, and other low-speed peripherals. Because the USI is multiplexed by function, firmware and board design must assign the interface pins consistently for the selected protocol and account for pull-up requirements used by I2C.
What is the difference between MSP430F2013TPW and MSP430F2013IPW?
The MSP430F2013TPW and MSP430F2013IPW are ordering variants of the MSP430F2013 device, with the primary documented distinction being their temperature-grade options. The TPW configuration is specified for -40°C to 105°C, while the IPW designation identifies the industrial-temperature ordering option. Both use the 14-pin TSSOP (PW) package. When changing an existing MSP430F2013TPW design to IPW, verify the complete ordering table, temperature range, qualification information, and firmware requirements before treating the change as production-approved.
Can MSP430F2013IPW replace MSP430F2013TPW on the same PCB?
The MSP430F2013IPW can be considered as a same-footprint option because it belongs to the MSP430F2013 family and uses the 14-pin TSSOP (PW) package, but production substitution still requires formal review. The temperature-grade designation differs, so the allowed operating range and qualification conditions must match the end product. Confirm pin functions, electrical limits, ordering suffixes, and firmware behavior against the manufacturer datasheet. The TPW supply format is specified as a tube, so procurement may also require attention to the alternative supplier's packaging arrangement.
What is the best drop-in replacement for MSP430F2013TPW?
The closest same-footprint choices are MSP430F2013 family members in the 14-pin TSSOP (PW) package, including MSP430F2013IPW and closely related F2012, F2011, F2002, and F2001 industrial-temperature variants. These are not automatically identical replacements because Flash, RAM, ADC, and peripheral configurations can differ. Review the MSP430F20x1, MSP430F20x2 and MSP430F20x3 datasheet and confirm every used pin, memory requirement, clock setup, and communication peripheral before approving a substitution.
MSP430F2013TPW vs MSP430F2012IPW: which is better for a new design?
Choose the MSP430F2013TPW for a design requiring the F2013's stated 16 MHz CPU, 2 KB Flash, 128 bytes of RAM, 16-bit sigma-delta ADC, and USI resources. MSP430F2012IPW belongs to the related MSP430F20x family and may suit a lower-memory or simpler sensing design, but its exact resources must be checked against the application. The comparison should prioritize ADC requirements, memory footprint, serial peripherals, package pins, and temperature grade rather than treating the shared MSP430 architecture as proof of complete interchangeability.
When should I choose MSP430F2013TPW instead of a larger MCU?
Choose the MSP430F2013TPW when the design needs one analog measurement channel, SPI or I2C connectivity, modest program and data memory, and very low power rather than a large application processor or high-pin-count MCU. Its 14-pin TSSOP package can reduce board area, while five low-power modes support duty-cycled operation. Consider a larger MCU if firmware growth, multiple ADC channels, more serial interfaces, greater RAM, or complex connectivity requirements exceed the resources of the MSP430F2013.
Is the MSP430F2013TPW suitable for industrial sensing and instrumentation?
The MSP430F2013TPW is suitable for many industrial sensing and instrumentation tasks because its specified operating range is -40°C to 105°C, and it combines a 16-bit sigma-delta ADC with SPI and I2C-capable USI hardware. The 2 KB Flash and 128 bytes of RAM are suitable for compact acquisition and control code but may constrain large protocol stacks or buffering. Validate analog front-end settling, sensor excitation, calibration storage, and enclosure temperatures for the deployed equipment.
Where can I buy MSP430F2013TPW online?
Use the Request a Quote form on this page to request MSP430F2013TPW pricing, stock confirmation, and lead time from XAIPART. The exact quantity, delivery schedule, and accepted packing form should be stated in the quote request. The target device is the 14-pin TSSOP (PW) configuration with a 2 KB Flash and 128 bytes of RAM. Do not substitute an unrelated package or temperature suffix without confirming the footprint, operating range, and qualification requirements.
What is the price of MSP430F2013TPW?
The current unit price and available quantity should be obtained through the Request a Quote form on this page. Pricing depends on order quantity, inventory position, packaging requirements, and delivery destination. The requested MPN must remain MSP430F2013TPW, which identifies the Texas Instruments 14-pin TSSOP (PW) mixed-signal MCU with 2 KB Flash and 128 bytes of RAM. Request separate quotations if your design also requires reel-packed production quantities or a documented lead time.
What is the lead time and stock status for MSP430F2013TPW?
Submit the MSP430F2013TPW quantity, target date, and packaging preference through the Request a Quote form on this page to obtain current stock and lead-time confirmation. The verified product information identifies the device as a 14-pin TSSOP (PW) part with a -40°C to 105°C operating range, but it does not state a fixed current delivery schedule. For production planning, request confirmation for each planned build quantity and specify whether tube or another approved packing form is required.
What can replace MSP430F2013TPW without changing the PCB?
A no-PCB-change replacement must use the same 14-pin TSSOP footprint and provide the required power, ADC, memory, and USI functions. MSP430F2013IPW is the closest family option to evaluate because it retains the MSP430F2013 identity and PW package. MSP430F2012IPW, MSP430F2011IPW, MSP430F2002IPW, and MSP430F2001IPW may also merit footprint-level review, but each can differ in memory or peripheral resources. Validate the pin table, interrupt vectors, timing, ADC behavior, and firmware before release.

Справочные инженерные данные для MSP430F2013TPW — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MSP430F2013TPW for a compact, low-power sensing design that requires a 16 MHz MSP430 CPU16 core, 2 KB of Flash, 128 bytes of RAM, a 16-bit sigma-delta ADC, and SPI or I2C through the USI. Its -40°C to 105°C range and 14-pin TSSOP package are appropriate for compact industrial or instrumentation products. Select MSP430F2013IPW when its ordering and supply format better fit the product, after confirming the complete temperature and qualification requirements. Consider F2012IPW, F2011IPW, F2002IPW, or F2001IPW only when the reduced or changed resources are acceptable and the complete pin, memory, ADC, and firmware comparison passes. A larger low-power MCU should be chosen if the application needs more RAM, more ADC channels, additional communication peripherals, or substantially larger firmware.

Сравнение с аналогами

Параметр Этот товар MSP430F2013IPW MSP430F2012IPW MSP430F2011IPW MSP430F2002IPW MSP430F2001IPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW)
CPU Architecture 16-bit MSP430 CPU16 RISC 16-bit MSP430 CPU16 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC

Ключевые отличия

  • Target order code combines the extended-range configuration with tube packaging (против MSP430F2013IPW)
  • Larger memory allocation than lower-resource MSP430F20x family alternatives (против MSP430F2012IPW)
  • Dedicated 16-bit sigma-delta measurement channel (против MSP430F2001IPW)
  • Configurable USI supports two common embedded serial buses (против MSP430F2002IPW)

Заметки по проектированию

Calculate the complete power budget by separating active and low-power intervals for the MCU, ADC front end, USI peripherals, regulator, and sensor. The MSP430F2013TPW operates from 2.5 V or 3.3 V and supports five low-power modes, but the system battery life is determined by the highest-current path and by how long the device remains awake. Use the manufacturer sleep-current figures and application timing to calculate average consumption, then include regulator quiescent current because it can dominate a low-duty-cycle design.

Follow the recommended decoupling and analog-layout practices in the manufacturer datasheet. Place the required supply capacitor close to the VCC pin, provide a short return path to the device ground, and keep the sigma-delta ADC input trace away from switching nodes and high-current digital returns. Use a quiet analog ground region when the sensor front end requires it, and verify the complete signal path with the intended source impedance. Analog grounding should be evaluated systematically rather than by adding an arbitrary connection between ground planes.

Do not assume that every MSP430F20x device with a 14-pin PW package is firmware-compatible. Before substituting an F2012, F2011, F2002, or F2001 variant, compare the pin table, Flash size, RAM size, ADC resources, USI behavior, interrupt vector layout, and clock requirements. Also check the clock source and external-component requirements in the device-specific datasheet. A successful flash download is not sufficient proof of equivalence because peripheral initialization and memory assumptions may differ.

Treat the USI connections as a shared peripheral resource and assign their pins consistently for either SPI or I2C operation. For I2C, include the pull-up arrangement required by the bus voltage, topology, and sink current. For SPI, define clock polarity and phase in firmware and keep the clock trace short where the connected device supports the intended rate. Because the same USI can serve multiple protocols, confirm that mode changes, sleep transitions, and peripheral connections do not leave the interface in an inconsistent state.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The verified product information does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. The TPW operating range of -40°C to 105°C does not by itself establish AEC-Q100 qualification.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MSP430F2013TPW datasheet MSP430F2013TPW pinout MSP430F2013TPW datasheet pdf MSP430F2013TPW equivalent MSP430F2013TPW replacement MSP430F2013TPW cross reference MSP430F2013TPW vs MSP430F2013IPW MSP430F2013TPW footprint MSP430F2013TPW application circuit MSP430F2013 price MSP430F2013 stock Texas Instruments MSP430F2013TPW MSP430F2013 16MHz ADC USI MSP430F2013 14-TSSOP pinout

Связанные компоненты & термины

Texas Instruments MSP430F2013TPW MSP430F2013 MSP430F2013IPW MSP430F2012IPW MSP430F2011IPW MSP430F2002IPW MSP430F2001IPW MSP430 mixed-signal microcontroller 16-bit RISC CPU16 sigma-delta ADC Universal Serial Interface SPI I2C Flash memory RAM 14-pin TSSOP PW package surface-mount low-power modes industrial sensing battery-powered data logger
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ