Texas Instruments

NE5532AD - Dual 10MHz Low-Noise Op Amp | Texas Instruments

MPN: NE5532AD ✓ چالاک
30 V Vdss 8-pin SOIC Package
MOQ: 1 |

NE5532AD گشتی

The Texas Instruments NE5532AD is a dual, low-noise operational amplifier designed for audio applications, with a 10 MHz typical unity-gain bandwidth, 5 nV/√Hz typical input noise voltage at 1 kHz, and 100 dB typical high dc voltage gain. The device is supplied in an 8-pin SOIC package. It is unity-gain compensated and combines low noise, low distortion, high output-drive capability, and a typical 32 V peak-to-peak output voltage swing under ±18 V supply conditions.

An operational amplifier is an active semiconductor device that uses high gain and negative feedback to amplify voltage differences between its inputs. The NE5532 belongs to the low-noise operational amplifier hierarchy, which sits within analog signal-chain ICs, integrated circuits, and semiconductor devices. Its dual-amplifier configuration provides two independent amplifiers in one package, reducing board area in audio preamplifiers, mixers, active filters, and signal-conditioning circuits.

The principal audio-oriented characteristics are 5 nV/√Hz typical equivalent input noise voltage at 1 kHz and a 10 MHz typical unity-gain bandwidth. According to the Texas Instruments product description, the NE5532 is a dual 30 V, 10 MHz low-noise operational amplifier. The device also provides 100 dB typical high dc voltage gain, a 32 V typical peak-to-peak output swing with ±18 V supplies, and a typical slew rate of 600 V/µs.

The NE5532x family is internally compensated for unity-gain operation, reducing the external compensation components normally required around a high-speed amplifier. Its dual architecture allows two amplifier channels to share one package while retaining the low-noise characteristics sought in audio paths. Input-protection diodes, output short-circuit protection, and a high output-drive capability are identified in the manufacturer datasheet, making the device suitable for conventional low-frequency audio and general analog applications.

Typical uses include stereo audio preamplification, mixing consoles, headphone-driver stages, active equalization filters, low-level audio signal conditioning, and instrumentation requiring low input noise. The dual configuration is especially useful where two related channels are required, such as left and right program paths. Its 10 MHz bandwidth also provides more than enough bandwidth for conventional audio while retaining useful response for other precision low-noise signal-chain work.

When designing around the NE5532AD, verify the required output swing, input common-mode range, supply voltage, and stability at the selected gain against the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the datasheet rather than left with open inputs. Source and sink capability should also be checked when driving a transformer, headphone stage, or capacitive load.

This product record combines verified manufacturer and distributor information with practical engineering guidance, package and pinout details, pricing references, and a qualification of available drop-in alternatives. The comparison and application sections emphasize where the NE5532AD fits and where the available source evidence does not support claiming a true same-package replacement.

جێگرەوەکانی جێگۆڕکێ بۆ NE5532AD — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ NE5532AD (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type, Mounting Type, Package, Slew Rate.

Texas Instruments
Amplifier Type: Operational amplifier
Mounting Type: Through-hole
Package: 8-DIP, 0.300 in, 7.62 mm
بەراوردکردن لەگەڵ NE5532AD →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

NE5532AD زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Amplifier Type Dual operational amplifier
Number of Circuits 2 circuits
ڤۆڵتیەی دابینکردن 30 V
Typical Unity-Gain Bandwidth 10 MHz
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz
High DC Voltage Gain 100 dB typical
Peak-to-Peak Output Voltage Swing 32 V typical with ±18 V supply
Slew Rate 600 V/µs typical
Gain Compensation Internally compensated for unity-gain operation
پاکێج 8-pin SOIC
جۆری دامەزراندن Surface mount
ژمارەی پینەکان 8 pins
Input Protection Input-protection diodes
Output Protection Output short-circuit protection
Primary Application Audio applications

ڕێکخستنی پینی NE5532AD

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 OUTA — Channel A output
پین 2 IN-A — Channel A inverting input
پین 3 IN+A — Channel A non-inverting input
پین 4 V- — Negative supply connection
پین 5 IN+B — Channel B non-inverting input
پین 6 IN-B — Channel B inverting input
پین 7 OUTB — Channel B output
پین 8 V+ — Positive supply connection

بەکارهێنانە باوەکان

NE5532AD گونجاوە بۆ 6 بەکارھێنانs: Stereo Audio Preamplifier, Audio Mixing Console, Active Equalization Filter, Headphone Output Stage, Low-Level Signal Conditioning, Consumer Audio Equipment.

🎧

Stereo Audio Preamplifier

The NE5532AD is well matched to a stereo low-level audio preamplifier because its dual architecture provides two independent channels in one 8-pin SOIC package. The 5 nV/√Hz typical input noise voltage at 1 kHz helps preserve quiet signal-chain performance, while the 10 MHz unity-gain bandwidth is substantially wider than the audio band. Each channel can use the standard unity-gain-compensated configuration without external compensation. Designers should still check the exact input common-mode range and output-swing limits in the manufacturer datasheet, especially when operating from asymmetrical dual supplies.

🎚️

Audio Mixing Console

An audio mixing console can use the NE5532AD for multiple low-noise input or summing stages because one SOIC package contains two amplifier channels. The 5 nV/√Hz typical input noise at 1 kHz is favorable for low-level program sources, and the 600 V/µs typical slew rate provides additional margin for transient audio content. The device’s unity-gain internal compensation simplifies direct implementation, but console designers must verify channel gain, common-mode range, output loading, and rail headroom before finalizing the mixer architecture.

🔧

Active Equalization Filter

The NE5532AD is suitable for active audio equalization filters because its low 5 nV/√Hz typical input noise at 1 kHz reduces added noise around the audio band, while its 10 MHz typical unity-gain bandwidth supports conventional crossover and shelving-filter designs. Internal unity-gain compensation allows straightforward closed-loop amplifier sections, and the dual package can implement two filter channels or a linked stereo pair. Component tolerances and the op amp’s exact gain-bandwidth behavior should be evaluated with the filter prototype before production.

🎧

Headphone Output Stage

The NE5532AD can serve in a modest headphone output stage when the required load and voltage swing remain within the device’s verified operating envelope. Its 600 V/µs typical slew rate supports fast audio transients, and its high dc gain is useful in feedback-based output networks. The dual SOIC package can drive left and right channels where the impedance and power requirements are modest. Designers must confirm output-current capability, voltage swing, stability, and thermal behavior because those exact limits are not included in the supplied specification excerpts.

📟

Low-Level Signal Conditioning

The NE5532AD is applicable to low-level analog signal conditioning when the source has low amplitude and the circuit requires low amplifier-added noise. Its 5 nV/√Hz typical input noise voltage at 1 kHz, 100 dB typical high dc voltage gain, and 10 MHz typical unity-gain bandwidth provide a useful combination for instrumentation-style amplifier sections. The internal unity-gain compensation and dual configuration simplify implementation, but the source impedance, input bias requirements, common-mode range, and output reference must be checked before selecting the device.

📱

Consumer Audio Equipment

The NE5532AD fits consumer audio equipment such as stereo preamplifiers, compact mixers, headphone helpers, and active tone controls because it combines a low-noise dual amplifier with a familiar 8-pin SOIC implementation. The 10 MHz bandwidth is comfortably above the audio range, and the two channels reduce footprint compared with separate single amplifiers. For battery-powered or single-supply products, however, the designer must verify the complete input and output common-mode ranges and rail-to-rail behavior rather than assuming that a high nominal supply rating guarantees practical operation near one rail.

What are the key specifications of NE5532AD that engineers should know?
The NE5532AD is a dual, 10 MHz, low-noise operational amplifier in an 8-pin SOIC package. According to the Texas Instruments product page, it is intended for audio applications and supports a 30 V supply rating. Typical input noise is 5 nV/√Hz at 1 kHz, high dc voltage gain is 100 dB, and slew rate is 600 V/µs. The amplifier is internally compensated for unity-gain operation, which simplifies low-noise audio preamplifier and active-filter designs.
Where can I download the NE5532AD datasheet PDF?
The official Texas Instruments NE5532AD datasheet PDF is available from the manufacturer data-sheet link for the NE5532 family. The linked document is titled “NE5532x, SA5532x Dual Low-Noise Operational Amplifiers” and covers electrical characteristics, application information, pin configuration, and ordering information. Engineers should use this manufacturer document rather than an unofficial mirror when making electrical-limit, package, or design decisions.
Where can I find the NE5532AD pinout?
The NE5532AD pinout is documented in the Texas Instruments NE5532 family datasheet. Its 8-pin SOIC configuration contains two complete low-noise amplifier channels, with separate non-inverting and inverting inputs and outputs for channels A and B. Power and ground pins are shared by both channels. Because the official diagram is authoritative for numbering and signal names, it should be checked before orienting the package on a PCB or in a socket.
What is the input noise voltage of the NE5532AD?
The NE5532AD has a typical equivalent input noise voltage of 5 nV/√Hz at 1 kHz. According to the Texas Instruments NE5532 product information, this low-noise characteristic is the central reason the dual amplifier is widely considered for audio preamplification and other low-level signal chains. Noise performance should still be evaluated over the complete signal bandwidth, because total integrated noise depends on both the device noise density and the bandwidth passed by the surrounding circuit.
What is the bandwidth and slew rate of NE5532AD?
The NE5532AD provides a typical unity-gain bandwidth of 10 MHz and a typical slew rate of 600 V/µs. According to the Texas Instruments NE5532 product page and manufacturer datasheet, these characteristics give the device ample speed for conventional audio while providing useful response in higher-bandwidth low-noise signal paths. The internal unity-gain compensation supports stable operation at the stated gain without requiring external compensation components.
Is NE5532AD suitable for audio preamplifier applications?
Yes, the NE5532AD is specifically suited to audio preamplifier applications. Its typical 5 nV/√Hz input noise at 1 kHz supports low-noise amplification of microphone, line, and playback signals, while the 10 MHz unity-gain bandwidth and 600 V/µs typical slew rate provide ample audio-band performance. The dual package also allows left and right or two sequential channels to share one 8-pin SOIC footprint.
What is the price of NE5532AD?
The verified distributor listing for NE5532AD shows a starting price of $0.5976 as of 2026-10-28. LCSC identifies the Texas Instruments NE5532AD as in stock, while Mouser and DigiKey also provide product and purchasing information. The quoted figure is a distributor reference price rather than a guaranteed quote for every quantity, so procurement should confirm current unit price, stock, and freight for the required order quantity.
Where can I buy NE5532AD online?
NE5532AD can be purchased from listed distributors including LCSC, Mouser, DigiKey, and Octopart. The LCSC listing reports an in-stock starting price of $0.5976 as of 2026-10-28, and the Mouser and DigiKey pages provide product, datasheet, inventory, and pricing links. Buyers should compare the live listing because stock, package markings, quantity breaks, and lead time can change after the verified data was retrieved.
What is the lead time for NE5532AD?
The verified web results establish that NE5532AD is offered by multiple distributors, and LCSC reports the part as in stock as of 2026-10-28, but they do not provide a numeric factory or distributor lead time. Current lead time therefore cannot be stated reliably without a quotation. For time-critical procurement, request a written commitment from the selected distributor and confirm whether the available NE5532AD is the required 8-pin SOIC package.
Is NE5532AD currently in stock?
Yes, LCSC’s verified product result explicitly reports NE5532AD as in stock, with a starting price of $0.5976 as of 2026-10-28. Mouser, DigiKey, and Octopart also provide availability or pricing references, but their snippets do not independently confirm stock. The LCSC status is therefore the directly verified availability statement, while live inventory should still be checked before ordering.
What can replace NE5532AD as a drop-in part?
The verified cross-reference results identify several NE5532-compatible amplifier families, but they do not establish five candidate MPNs that share both the NE5532AD’s 8-pin SOIC footprint and pin-to-pin function. OPA2134 and OPA2604 are discussed as possible replacements, while the Hotenda result mentions Analog Devices and Burr-Brown replacements, but package-specific evidence is incomplete. Therefore, none can be certified here as a strict same-package drop-in replacement without checking its current datasheet.
Is NE5532AD the same as an OPA2134 or OPA2604?
No, the verified sources describe the OPA2134 and OPA2604 as NE5532 alternatives, not as identical components. Their pin arrangements, package options, electrical limits, noise performance, and intended design trade-offs must be compared before substitution. In particular, an 8-pin DIP option cannot replace an 8-pin SOIC NE5532AD without PCB modification, while an SOIC option still requires pin-function and supply-slew verification.
When should I choose NE5532AD over another dual low-noise op amp?
Choose the NE5532AD when the design specifically calls for a dual low-noise audio amplifier in the 8-pin SOIC footprint and its verified characteristics align with the signal chain. Its 5 nV/√Hz typical noise at 1 kHz, 10 MHz unity-gain bandwidth, 100 dB typical dc gain, and 600 V/µs typical slew rate form a familiar audio-oriented baseline. Choose another device when its lower distortion, rail-to-rail input or output, higher precision, smaller package, or automotive qualification provides a measured benefit.
NE5532AD vs OPA2134PA - which is better for an audio preamp?
The NE5532AD is the safer selection when an existing board requires the specified 8-pin SOIC footprint and the familiar NE5532 performance baseline of 5 nV/√Hz typical input noise at 1 kHz. The OPA2134PA may offer a different sonic and distortion profile, but the verified source does not establish that its package is the same surface-mount configuration as the NE5532AD. Actual selection should compare supply range, input/output swing, noise density, distortion, and the required footprint.
What is the best Analog Devices equivalent for NE5532AD?
The verified cross-reference evidence names Analog Devices among manufacturers associated with NE5532 replacements, but it does not provide a specific MPN, package, or quantified parameter comparison. As a result, no Analog Devices part can be presented as a confirmed drop-in equivalent from the available evidence. The appropriate procedure is to search the NE5532 family cross-reference, then require an exact 8-pin SOIC footprint, matching pin functions, acceptable supply range, and comparable noise and distortion specifications.
What power-supply and decoupling considerations apply to NE5532AD?
The NE5532AD is intended for a rated supply of 30 V, and the verified specification excerpt describes 32 V typical peak-to-peak output swing with ±18 V supplies. Place supply-decoupling capacitors close to the amplifier’s supply pins and keep output-current requirements within the device’s limits, whose exact value is not present in the verified excerpts. Also verify the selected supply magnitude against the absolute maximum and common-mode limits in the manufacturer datasheet.

داتای سەرچاوەی ئەندازیاری بۆ NE5532AD — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the NE5532AD for low-level audio or general analog designs that specifically require a dual low-noise amplifier in an 8-pin SOIC footprint. Its verified characteristics include 5 nV/√Hz typical input noise at 1 kHz, 10 MHz typical unity-gain bandwidth, 100 dB typical dc gain, and 600 V/µs typical slew rate. The device is a practical fit for stereo preamplifiers, mixers, active filters, and low-level signal-conditioning blocks where those values meet the design requirements. OPA2134, OPA2604, and other named NE5532 alternatives should be selected only after their exact package and pinout have been confirmed; discussion-board references alone do not establish a drop-in replacement. If the design requires rail-to-rail operation, lower distortion, higher output-current capability, a smaller package, or documented automotive qualification, compare a modern dedicated amplifier against the complete NE5532 electrical envelope instead of selecting by the NE5532 name alone.

تێبینییەکانی دیزاین

Place the input and output components close to their associated NE5532AD pins to minimize parasitic feedback and instability. Keep high-impedance input traces short, provide a solid ground reference, and decouple the supply pins with local ceramic capacitance. The supplied excerpts do not specify the manufacturer’s recommended capacitor values, so stability and decoupling combinations should be selected using the official NE5532x datasheet and application guidance rather than inferred values.

Verify the actual positive and negative supply levels against the device’s operating and absolute-maximum limits before enabling the amplifier. Although the verified product page states a 30 V rating and cites ±18 V conditions for the 32 V typical output swing, those figures do not establish permissible single-supply operation. Confirm the input common-mode range and output-swing limits so signals remain valid during startup and at minimum and maximum channel levels.

Do not treat a NE5532-family alternative as a drop-in part solely because discussions call it equivalent. Check the exact package, pin functions, supply range, input common-mode limits, output swing, noise density, slew rate, and stability with the intended load. The verified cross-reference material mentions OPA2134, OPA2604, and Analog Devices or Burr-Brown replacements, but it does not provide enough package-level evidence to certify them as replacements for the 8-pin SOIC NE5532AD.

The NE5532AD is internally compensated for unity-gain operation, but closed-loop bandwidth still depends on the selected feedback network and noise gain. Evaluate gain margins and phase margin across the complete frequency range when operating near the 10 MHz typical unity-gain bandwidth. Audio applications generally operate far below that limit, yet EMI, cable capacitance, or unintended high gain can make stability considerations more demanding than the nominal bandwidth suggests.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The supplied verified excerpts do not contain explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. AEC-Q100 is recorded as not applicable because the cited product is described as a general-purpose audio operational amplifier, not an automotive-qualified variant.

داتا پشتڕاستکراوەتەوە لە: 2026-10-28 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

NE5532AD NE5532AD datasheet PDF Texas Instruments NE5532AD NE5532AD 8-SOIC NE5532AD 5 nV Hz input noise NE5532AD 10 MHz unity gain bandwidth NE5532AD audio preamplifier NE5532AD active equalization filter NE5532AD vs OPA2134PA NE5532AD drop-in replacement NE5532AD buy price where to buy NE5532AD online NE5532AD pinout what can replace NE5532AD

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments NE5532AD NE5532 NE5532x SA5532x dual operational amplifier low-noise operational amplifier analog signal-chain IC integrated circuit semiconductor unity-gain bandwidth equivalent input noise voltage slew rate high dc voltage gain 8-pin SOIC SOIC family surface mount audio preamplifier audio mixing console active equalization filter headphone output stage signal conditioning OPA2134 OPA2604
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ