Texas Instruments

OPA2650U - Dual 360MHz Low-Power Op Amp | Texas Instruments

MPN: OPA2650U ✓ چالاک
8-pin SOIC Package 5 MHz Speed
MOQ: 1 |

OPA2650U گشتی

The Texas Instruments OPA2650U is a dual wideband, low-power voltage-feedback operational amplifier with unity-gain bandwidth of 360 MHz, 50 mW per channel, and low differential gain and phase error of 0.01% and 0.025 degrees. The device is offered in an 8-pin SOIC package and contains two amplifier channels.

An operational amplifier is a voltage-feedback amplifier used to amplify, buffer, filter, or drive analog signals. The OPA2650 belongs to the high-speed voltage-feedback operational-amplifier family, within the broader amplifier IC and analog signal-processing hierarchy. Its combination of wide bandwidth, low power, and low distortion makes it suitable for systems that require accurate signal amplification beyond the operating range of general-purpose amplifiers.

Key features include unity-gain stability at 360 MHz, a 50 mW per-channel power rating, fast 0.01% settling, low harmonic distortion characterized at 5 MHz, and differential gain and phase error of 0.01% and 0.025 degrees. These characteristics support high-gain closed-loop operation, accurate pulse processing, and low-error feedback networks. The dual-channel configuration also reduces component count in balanced, differential, or dual-channel signal-processing circuits.

The OPA2650 is a dual voltage-feedback amplifier rather than a differential amplifier, current-output amplifier, or programmable-gain amplifier. Its high bandwidth allows small-signal operation at high frequencies, while its 50 mW per-channel power level targets power-conscious wideband systems. Designers should distinguish bandwidth from large-signal output capability and confirm output-voltage swing, input-common-mode range, supply-current limits, and short-circuit behavior against the load being driven.

Typical applications include video and image-signal amplification, high-speed instrumentation, communications-interface signal conditioning, active filtering, pulse shaping, and wideband feedback loops. The dual amplifier can implement matched stages, such as differential input buffering, complementary signal paths, or two channels of a communications receiver.

PCB layout should minimize parasitic capacitance at the input and output pins and preserve the high-speed return path. Keep feedback components close to the amplifier, provide a low-impedance bypass connection to the supply pins, and avoid routing high-impedance input traces beside noisy or fast-switching nets. Verify stability, output swing, distortion, and thermal performance with the production load and PCB stack-up.

This page combines the OPA2650U technical description, package information, sourcing guidance, cross-reference candidates, and practical design considerations to support faster component selection and PCB implementation.

جێگرەوەکانی جێگۆڕکێ بۆ OPA2650U — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ OPA2650U (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type.

Texas Instruments
Amplifier Type: Dual voltage-feedback operational amplifier
بەراوردکردن لەگەڵ OPA2650U →

OPA2652U

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 8-pin SOIC
Dual voltage-feedback operational amplifier · 2 channels · 200 MHz · 5.5 mA per channel · ±5 V · +6 V to +12 V · 140 mA · Classical differential input

پەیوەندی بۆ نرخ

بینینی داتاشیت →

OPA2654U

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 8-pin SOIC
Same dual voltage-feedback topology and 8-pin SOIC footprint, with lower bandwidth and different power consumption than the OPA2650U

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

OPA2658U

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 8-pin SOIC
Same dual voltage-feedback topology and 8-pin SOIC footprint, with approximately 200 MHz bandwidth versus 360 MHz for the OPA2650U

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD8058ARZ

✅ جێگرەوەی ڕاستەوخۆ
📦 8-pin SOIC
325 MHz bandwidth versus 360 MHz for the OPA2650U, a 35 MHz or approximately 9.7% reduction

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

OPA2650U زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Amplifier Type Voltage Feedback Operational Amplifier
Number of Channels 2 channels
Unity-Gain Bandwidth 360 MHz
Power Consumption 50 mW per channel
Gain Stability Unity-gain stable
Settling Accuracy 0.01%
Harmonic Distortion Characterization Frequency 5 MHz
Differential Gain Error 0.01%
Differential Phase Error 0.025 degrees
پاکێج 8-pin SOIC

ڕێکخستنی پینی OPA2650U

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 OUTA — Channel A output
پین 2 -INA — Channel A inverting input
پین 3 +INA — Channel A non-inverting input
پین 4 V- — Negative supply connection
پین 5 +INB — Channel B non-inverting input
پین 6 -INB — Channel B inverting input
پین 7 OUTB — Channel B output
پین 8 V+ — Positive supply connection

بەکارهێنانە باوەکان

OPA2650U گونجاوە بۆ 6 بەکارھێنانs: Wideband Video Signal Conditioning, High-Speed Instrumentation Signal Conditioning, Communications Receiver Signal Path, Active Filtering and Frequency Response Correction, Pulse Shaping and Fast Settling Measurement, Balanced Dual-Channel Buffering.

📺

Wideband Video Signal Conditioning

The OPA2650U fits wideband video conditioning because its 360 MHz unity-gain bandwidth provides substantially more bandwidth than many general-purpose video amplifiers, while the dual circuit supports two signal paths in one 8-pin SOIC. Place one channel ahead of an ADC or video processing stage and use the other for monitoring or termination. Its 50 mW per-channel power level suits compact systems, but the design must still verify output swing, load compatibility, settling, and the video standard’s gain and distortion requirements.

🔧

High-Speed Instrumentation Signal Conditioning

The OPA2650U is appropriate for instrumentation front ends that need more loop bandwidth than ordinary precision amplifiers provide. Its 360 MHz unity-gain bandwidth and differential gain and phase errors of 0.01% and 0.025 degrees support accurate closed-loop amplification in sensor, buffer, and gain-stage circuits. The low 0.01% settling specification supports pulse-based measurements, while dual channels permit a matched signal and reference path. Validate noise density, input offset, bias current, common-mode range, and sensor impedance before selecting the external network.

🌐

Communications Receiver Signal Path

The OPA2650U can condition moderate-frequency signals in communications receivers when its 360 MHz unity-gain bandwidth and 50 mW per-channel power are useful for compact, multi-channel equipment. The dual amplifier can handle an incoming channel and a monitor or feedback branch without requiring separate packages. Because wideband amplifiers can amplify out-of-band noise as well as the desired signal, the implementation should include appropriate filtering, controlled impedance paths, and verified settling. Supply voltage, common-mode range, and output loading remain decisive application-level constraints.

📡

Active Filtering and Frequency Response Correction

The OPA2650U is suitable for active filter stages requiring a high unity-gain bandwidth and unity-gain stability. Its 360 MHz bandwidth provides ample loop gain for many moderate-Q high-frequency filters, while the reported 0.01% differential gain error and 0.025-degree differential phase error support response accuracy. The dual configuration can implement two poles, a quadrature path, or a matched filter. Component tolerances, capacitor parasitics, noise gain, loading, and the desired operating frequency should be evaluated together because bandwidth alone does not establish final filter response.

⚡

Pulse Shaping and Fast Settling Measurement

The OPA2650U fits pulse-shaping and fast-settling measurement circuits because the manufacturer rates it for fast 0.01% settling and a 360 MHz unity-gain bandwidth. These characteristics can preserve pulse edges and reduce amplitude error when the closed-loop bandwidth is selected appropriately. The device can also shape two related channels in a dual implementation. Designers should confirm slew rate, output swing, input recovery, overload recovery, and load drive against the pulse amplitude and repetition rate before using the published bandwidth as a complete settling guarantee.

🖥️

Balanced Dual-Channel Buffering

The OPA2650U is a natural choice for matched dual-channel buffering because both amplifiers share one 8-pin SOIC package and can be routed with similar board geometry. Such arrangements appear in differential signal conditioning, analog test systems, communications interfaces, and paired sensor channels. The matched package supports consistent layout, but it does not guarantee identical DC or AC performance unless the circuit and loading are symmetric. Maintain matched component networks, provide equal decoupling and return paths, and verify channel-to-channel gain, phase, output swing, and stability in the finished assembly.

کورتەی بەرهەمە پێشنیارکراوەکان

OPA2650U Texas Instruments بەکارهێنراوە لە: Wideband Video Signal Conditioning, High-Speed Instrumentation Signal Conditioning, Communications Receiver Signal Path, Active Filtering and Frequency Response Correction, Pulse Shaping and Fast Settling Measurement, Balanced Dual-Channel Buffering AD8058ARZ Cross-brand dual wideband amplifier candidate بەکارهێنراوە لە: Wideband Video Signal Conditioning, Active Filtering and Frequency Response Correction OPA2658U Same-family instrumentation alternative بەکارهێنراوە لە: High-Speed Instrumentation Signal Conditioning, Balanced Dual-Channel Buffering OPA2652U Texas Instruments بەکارهێنراوە لە: Communications Receiver Signal Path OPA2654U Same-family pulse-conditioner alternative بەکارهێنراوە لە: Pulse Shaping and Fast Settling Measurement
What is the OPA2650U?
The OPA2650U is a dual wideband, low-power voltage-feedback operational amplifier with two amplifier channels in an 8-pin SOIC package. According to the Texas Instruments OPA2650 datasheet, its headline specifications include 360 MHz unity-gain bandwidth, 50 mW per channel, unity-gain stability, fast 0.01% settling, and differential gain and phase errors of 0.01% and 0.025 degrees. It is intended for high-speed analog signal conditioning, filtering, buffering, and communications or instrumentation applications.
What are the key specifications of OPA2650U that engineers should know?
The OPA2650U is a dual voltage-feedback operational amplifier rated at 360 MHz unity-gain bandwidth and 50 mW per channel. The Texas Instruments OPA2650 datasheet identifies unity-gain stability, fast 0.01% settling, low-harmonic performance characterized at 5 MHz, and differential gain and phase error of 0.01% and 0.025 degrees. Its two channels are integrated in an 8-pin SOIC package, allowing matched dual-channel signal paths without requiring two separate amplifier packages.
Where can I download the OPA2650U datasheet PDF?
The official OPA2650U datasheet PDF is available from the Texas Instruments product documentation for the OPA2650 family. The document covers the dual wideband, low-power voltage-feedback operational amplifier and its 360 MHz unity-gain bandwidth, 50 mW per-channel power, electrical characteristics, pin configuration, and application information. Use the manufacturer document when defining the PCB footprint, pin functions, supply arrangement, and application circuit because it is the controlling technical reference for the OPA2650U.
Where can I find the OPA2650U pinout?
The OPA2650U pinout is defined by the pin-description table in the Texas Instruments OPA2650 datasheet. The device is an 8-pin SOIC with two complete voltage-feedback amplifier channels. Its standard connection includes channel A at pins 1 through 4, channel B at pins 5 through 8, positive supply at pin 8, and negative supply at pin 4 for the usual dual-supply implementation. Verify the pin-description table before assigning PCB nets or applying power.
Is OPA2650U suitable for high-speed active filters?
The OPA2650U is suitable for many high-speed active-filter stages because it combines a 360 MHz unity-gain bandwidth with unity-gain stability and low differential gain and phase error. The Texas Instruments OPA2650 datasheet reports 0.01% differential gain error and 0.025 degrees differential phase error, characteristics that support precise closed-loop response. Component values, allowable noise gain, output loading, and frequency-dependent behavior of the selected resistor and capacitor network must still be evaluated for the target filter.
What can replace the OPA2650U?
The closest drop-in candidates identified for the OPA2650U are the same-family TI OPA2652U, OPA2654U, and OPA2658U, plus the Analog Devices AD8058ARZ. All use an 8-pin SOIC arrangement suitable for footprint reuse, but bandwidth, supply, power, and distortion differ. Treat these as engineering replacements rather than automatic equivalents: compare the complete electrical tables and confirm the required supply voltage, output swing, load, stability, and package details before substitution.
Is OPA2650U the same as OPA2652U?
The OPA2650U and OPA2652U are pin-compatible dual voltage-feedback amplifiers in the 8-pin SOIC family, but they are not electrically identical. The OPA2650U has 360 MHz unity-gain bandwidth, while the OPA2652U is a lower-bandwidth member of the related family. According to the manufacturer family information, their bandwidth, power, dynamic performance, and application emphasis differ. Use the OPA2650U when its higher bandwidth is required; otherwise review the OPA2652U data for adequate loop gain and response.
OPA2650U vs OPA2652U - which is better for a video signal chain?
Choose the OPA2650U when the video signal chain needs the family's higher 360 MHz unity-gain bandwidth and the resulting additional loop-gain bandwidth. Choose the OPA2652U when its lower-bandwidth performance is sufficient and power or dynamic specifications better match the design. Both are dual voltage-feedback amplifiers in an 8-pin SOIC, which simplifies replacement. The decisive comparison must include the required signal bandwidth, gain, settling, output swing, noise, power, and load rather than package compatibility alone.
When should I choose OPA2650U over OPA2654U?
Choose the OPA2650U when the circuit benefits from its 360 MHz unity-gain bandwidth and low-power 50 mW per-channel rating. The OPA2654U is a related 8-pin SOIC device with a lower bandwidth, so it can be preferable where the required closed-loop response is lower and its other electrical characteristics provide a better match. Because both are voltage-feedback amplifiers, the decision should be based on the complete signal-chain requirements and the minimum bandwidth, gain accuracy, power, and distortion needed in production.
Is the Analog Devices AD8058ARZ a drop-in replacement for OPA2650U?
The AD8058ARZ is a practical cross-brand candidate because it is a dual voltage-feedback operational amplifier in an 8-pin SOIC with 325 MHz bandwidth, as identified in the OPA2650U cross-reference material. Its bandwidth differs from the OPA2650U by 35 MHz, or approximately 9.7%. However, input offset, bias current, noise, output swing, supply limits, quiescent current, stability, and compensation details must match the application before the board is released.
Where can I buy OPA2650U online?
Use the Request a Quote form on this page to request OPA2650U availability, order confirmation, and current lead time. The part is identified as a dual voltage-feedback amplifier in an 8-pin SOIC package, and its manufacturer documentation supports direct technical evaluation. Quote requests allow the exact OPA2650U suffix, requested quantity, delivery location, and packaging requirements to be confirmed before an order is placed.
What is the price of OPA2650U?
Request the current OPA2650U quotation through the Request a Quote form on this page. The structured price field is populated only when a qualifying listing contains explicit quantity-break prices for this exact suffix and quantity. Because no qualifying quantity-price table is shown for OPA2650U, no price figure is stated. The quote request should state the required quantity, target delivery location, acceptable packaging, and any date needed for production planning.
What is the lead time for OPA2650U?
Confirm the current OPA2650U lead time through the Request a Quote form on this page. Lead time can depend on order quantity, package format, manufacturing allocation, and destination, so it should be tied to a specific purchase request rather than treated as a fixed catalog attribute. For project planning, provide the required delivery date and annual usage along with the initial build quantity so production scheduling can be evaluated against the confirmed schedule.
Is OPA2650U in stock?
Submit an OPA2650U stock and availability request through the Request a Quote form on this page. Current inventory is confirmed as part of the quotation response, including the exact suffix and quantity needed for the design. Because stock changes independently of product technical content, request confirmation before committing a production schedule or purchase order. Include the target package, order quantity, delivery country, and required ship date for the most useful response.
How should OPA2650U be decoupled on a PCB?
Place the supply bypass capacitors immediately beside the OPA2650U supply pins and preserve a short, low-inductance return path to the device ground. The Texas Instruments OPA2650 datasheet should be used to confirm the recommended supply network and component values. Keep the input and feedback nodes compact, avoid routing sensitive input nets beside digital or switching signals, and use a continuous ground plane where practical. High-frequency layout performance depends on the capacitor type, via arrangement, package parasitics, and the actual PCB stack-up.

داتای سەرچاوەی ئەندازیاری بۆ OPA2650U — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the OPA2650U when the design requires two voltage-feedback channels with high unity-gain bandwidth, fast settling, and low per-channel power. It is particularly appropriate for wideband instrumentation, video conditioning, communications paths, and active filters. Select the OPA2652U when its lower-bandwidth performance is adequate and its electrical characteristics better match the circuit. Consider the OPA2654U or OPA2658U when their bandwidth and power profiles fit a lower-bandwidth dual-channel design. The AD8058ARZ is the strongest cross-brand candidate because its 325 MHz bandwidth is close to the OPA2650U and it uses an 8-pin SOIC, but supply limits, noise, output swing, bias current, and stability must still be reconciled. In every case, package compatibility enables PCB reuse but does not replace electrical validation.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە OPA2652U OPA2654U OPA2658U AD8058ARZ
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices
Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Amplifier Architecture Voltage Feedback Voltage Feedback Voltage Feedback Voltage Feedback Voltage Feedback

جیاکەرەوە سەرەکییەکان

  • Highest unity-gain bandwidth among the listed candidates (بەراورد بەAD8058ARZ)
  • Double the channel count of a single-amplifier alternative class (بەراورد بەOPA2652U)
  • Low power for a 360 MHz dual amplifier (بەراورد بەAD8058ARZ)

تێبینییەکانی دیزاین

Treat the OPA2650U as a high-frequency analog device even though its bandwidth is usually specified at small signal. Keep input and feedback traces short, connect feedback components directly to the relevant pins, and avoid routing the non-inverting input beside digital clocks, switching-node copper, or other fast edges. Use a continuous ground plane and place supply bypass capacitors close to pins 4 and 8. Check the production PCB stack-up and via inductance because package-level bandwidth does not guarantee the same system response.

Validate gain stability, output swing, and settling with the actual source and load impedances. The 360 MHz unity-gain bandwidth and unity-gain-stable specification describe the amplifier, not every feedback network built around it. High noise gain, reactive loads, long feedback loops, or probe capacitance can alter phase margin and effective settling behavior. Use the Texas Instruments OPA2650 datasheet for the recommended test circuit and evaluate the final board with the intended source, cable, ADC input, and instrumentation setup.

Do not substitute the OPA2650U solely because another dual amplifier uses an 8-pin SOIC package. Confirm pin functions, supply range, input common-mode range, output swing, quiescent current, input offset, bias current, noise, stability, and load capability. The OPA2652U, OPA2654U, OPA2658U, and AD8058ARZ candidates share the general package form but have different bandwidth and electrical characteristics. Revalidate every value in the manufacturer data sheet before approving a drop-in substitution.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status is not stated in the manufacturer information and distributor snippets used for this record. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status with the current manufacturer product documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-09 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

OPA2650U datasheet OPA2650U pinout OPA2650U datasheet pdf OPA2650U specifications OPA2650U equivalent OPA2650U replacement OPA2650U cross reference OPA2650U vs OPA2652U OPA2650U vs AD8058ARZ OPA2650U application circuit Texas Instruments OPA2650U OPA2650U SOIC-8 pinout OPA2650U price OPA2650U stock OPA2650U 360MHz amplifier

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments OPA2650U OPA2650 OPA2652U OPA2654U OPA2658U Analog Devices AD8058ARZ voltage-feedback operational amplifier operational amplifier amplifier IC analog signal conditioning active filter unity-gain bandwidth settling time differential gain error differential phase error wideband amplifier SOIC-8 surface mount video signal conditioning instrumentation communications receiver pulse shaping dual amplifier
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ