ئاگاداری دوایین کڕین: PCA9514D نزیکە لە کۆتایی ژیان. دوایین ڕێکەوتی داواکاری: پەیوەندیمان پێوە بکە. بینینی بەشە جێگرەوە بەردەستەکان →
NXP Semiconductors

PCA9514D - 400kHz Hot-Swappable SMBus Buffer | NXP

MPN: PCA9514D ✗ کۆتایی ژیان
8-SO Package 400 kHz Speed
MOQ: 1 |

PCA9514D گشتی

The NXP Semiconductors PCA9514D is a single-channel, 400 kHz hot-swappable SMBus buffer designed to isolate an I2C or SMBus segment while a device is being connected, disconnected, or inserted into a live bus. The component is offered in an 8-pin SO package and is identified by NXP as a hot-swappable IC and SMBus bus buffer. Its principal electrical characteristic in the product record is a 400 kHz bus frequency.

An SMBus buffer is an interface IC that separates two bus segments so that capacitance, voltage differences, or temporarily disconnected devices do not disrupt the complete bus. In the wider product hierarchy, this buffer belongs to the I2C and SMBus interface family, which sits within interface ICs and system-level data-management electronics. Unlike a passive series resistor, a buffered hot-plug solution can isolate the bus during insertion or removal while maintaining defined logic levels across the separated segments.

The primary advantage of the PCA9514D is hot-swap bus isolation at a maximum stated frequency of 400 kHz. This makes it relevant to systems where modules may be added or removed after power is applied, including expandable industrial equipment, removable control modules, and board-to-board backplanes. The single-channel arrangement allows a designer to isolate one bus branch without introducing a multi-channel or bidirectional buffer architecture.

The PCA9514D uses NXP's 8-SO package, a compact surface-mount package suitable for conventional PCB assembly and automated manufacturing. Because it is a dedicated interface device, its principal design concerns are bus logic levels, pull-up placement, enable or connection timing, signal integrity, and the voltage relationship between the two bus sides. Detailed supply limits, channel voltage tolerance, propagation timing, and electrical characteristics should be taken directly from the manufacturer datasheet when those values are required for a production design.

Typical uses include hot-pluggable sensor and storage modules, removable front-panel controllers, distributed data-acquisition equipment, and board-to-board I2C links. In an industrial enclosure, the device can help prevent a faulty or newly inserted card from loading the main SMBus. In a portable or modular product, it can support a controlled connection sequence. The buffer does not eliminate the need for correct pull-up resistors or bus timing analysis; it provides the isolation element around which those network decisions are made.

Designers should verify enable sequencing, pull-up resistor locations, capacitance, and logic-level compatibility before finalizing the PCB. Keep both sides of the buffer routed with short, continuous return paths, and place associated protection or pull-up components close to their relevant pins. Review the datasheet pin-description and application diagrams when assigning tracks, particularly if a design uses the device for bidirectional bus translation rather than straightforward same-domain buffering.

This page combines the NXP product status, package and bus-frequency information with design-focused guidance for obsolete-product review, replacement planning, and hot-pluggable bus architecture decisions. It also separates the exact orderable PCA9514D references from broader interface-design considerations so engineers can evaluate lifecycle constraints without overlooking implementation details.

جێگرەوەکانی جێگۆڕکێ بۆ PCA9514D — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

PCA9514D,112

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-8
Exact NXP orderable reference with the same 8-pin package, 1 channel, 400 kHz bus rate, and stated terminal and performance compatibility; orderable packaging suffix differs

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCA9514D,118

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-8
Exact NXP orderable reference with the same 8-pin package, 1 channel, 400 kHz bus rate, and stated terminal and performance compatibility; orderable packaging suffix differs

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCA9514AD,118

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-8
Comparison listing identifies the same 8-pin package and consistent terminal and performance characteristics; designation differs from PCA9514D by the additional AD code

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCA9514D تایبەتمەندییەکان

Channel Count 1 channel
Maximum Bus Frequency 400 kHz
Supported Bus Type SMBus
Hot-Plug Function Hot-swappable bus isolation
Buffer Type Bus buffer and accelerator
پاکێج 8-SO
Package Pin Count 8 pins
جۆری دامەزراندن Surface mount
Manufacturer Lifecycle Status No longer manufactured

ڕێنمایی ڕێکخستنی پینی PCA9514D 8 pins

ڕێکخستنی پین بۆ PCA9514D (پاکێجی 8 pins). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 8 pins بۆ PCA9514D

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PCA9514D.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PCA9514D گونجاوە بۆ 6 بەکارھێنانs: Hot-Pluggable Sensor Modules, Industrial Data-Acquisition Systems, Removable Front-Panel Controllers, Board-to-Backplane Communication, Portable Diagnostic and Test Equipment, Removable Storage and Memory Modules.

🧩

Hot-Pluggable Sensor Modules

The PCA9514D fits modular sensor systems in which an external I2C or SMBus device may be attached while the host remains powered. Placing the single buffer between the host bus and the removable sensor branch isolates the branch during connection, reducing the chance that cable capacitance or an unsettled device state will disturb the main bus. The documented 400 kHz maximum supports Fast-mode-class communication while preserving a dedicated path for one module. Designers should still route both bus sides as short, continuous networks, verify pull-up values, and confirm the device's enable sequence in the manufacturer application guidance.

🏭

Industrial Data-Acquisition Systems

The PCA9514D is useful in industrial data-acquisition equipment where remote sensor cards or measurement modules can be replaced during maintenance. Its hot-swappable buffer function prevents the removable branch from coupling directly to the primary SMBus, allowing the main controller to continue operating while a module is inserted. The single-channel structure is appropriate when each card requires one isolated bus segment, and the 400 kHz rate is sufficient for many register-oriented sensor buses. The enclosure, grounding, cable length, and electrostatic-protection design remain important because the buffer isolates the bus but does not replace surge protection or proper signal conditioning.

📺

Removable Front-Panel Controllers

A removable display or keypad controller can be placed behind a PCA9514D so that its I2C or SMBus connection does not load the host bus during removal or installation. The buffer's hot-swappable characteristic allows the equipment to control the attachment sequence more reliably than an unprotected direct connection, while its 400 kHz maximum gives adequate bandwidth for typical control traffic. In a panel design, keep the protected and isolated sides separated in the layout, maintain a continuous ground path under the data route, and review the manufacturer diagram to implement the intended enable state during power-up and hot-plug events.

🖥️

Board-to-Backplane Communication

The PCA9514D can isolate a card-edge I2C or SMBus connection on a backplane where boards may be inserted, removed, or serviced without powering down the complete system. The buffer creates a controlled boundary between the system bus and the card bus, which can reduce disturbance from connected circuitry and cable capacitance. Its single-channel architecture suits one isolated branch per buffer, while the 400 kHz rating supports many management and configuration buses. Backplane implementations should control bus enable timing, account for connector and cable capacitance, and use a low-impedance ground plane to preserve signal integrity across the divided bus segments.

🔧

Portable Diagnostic and Test Equipment

PCA9514D can support diagnostic probe modules or interchangeable test cards that attach to a portable instrument through an I2C or SMBus connection. Hot-swappable isolation reduces disruption when a probe is changed, and the 400 kHz operating limit is suitable for configuration and measurement-control traffic rather than high-bandwidth data transfer. The design should include a deliberate enable sequence so that both bus sides reach valid levels before communication begins. Probe cables also require careful return-path construction and protection against external transients because bus isolation alone does not provide complete electrical isolation from the instrument ground.

🖥️

Removable Storage and Memory Modules

A PCA9514D can isolate a removable memory or storage controller that uses SMBus or I2C for configuration and status reporting. The buffer allows the module side to be disconnected without allowing the controller's bus loading to disturb the main bus. Its 400 kHz rate is appropriate for command, configuration, and status traffic rather than payload transfer, and the single-channel format allows each removable module to use a dedicated isolation point. The implementation should preserve the intended idle state, verify connector capacitance, and separate data and return paths so that the hot-plug transition does not create ringing or unintended current.

What is the PCA9514D?
The PCA9514D is a single-channel hot-swappable SMBus buffer manufactured by NXP Semiconductors. It isolates an I2C or SMBus segment during device insertion or removal and supports operation up to 400 kHz. According to the NXP product page, the device is packaged in an 8-SO package and is no longer manufactured, so it is positioned as a discontinued component for legacy-system support.
What is the operating frequency of PCA9514D?
The PCA9514D supports SMBus operation up to 400 kHz. This frequency is the maximum stated bus rate for the single-channel buffer and determines the upper speed limit for a connected bus segment. According to the NXP product information, the device also provides hot-swappable isolation, allowing a module on the buffered side to be connected or removed without allowing that branch to disrupt the complete bus.
Is PCA9514D suitable for I2C hot-plug applications?
Yes, PCA9514D is suitable for hot-pluggable I2C and SMBus branches because it is explicitly designed as a hot-swappable bus buffer. Its 400 kHz maximum bus frequency supports standard Fast-mode-class buses, while its single-channel structure isolates one branch at a time. The final design must still verify voltage compatibility, pull-up placement, and the enable sequence against the manufacturer datasheet.
What is the difference between PCA9514D and PCA9514D,118?
PCA9514D is the base device designation, while PCA9514D,118 is an orderable NXP suffix associated with the same 8-SO device and 400 kHz bus-buffer function. The available comparison information identifies them as package-, terminal-, and performance-compatible references. For a new assembly, engineers should confirm the exact ordering code, packaging method, and any temperature or lifecycle suffix in the NXP part record.
Can PCA9514D,112 replace PCA9514D?
PCA9514D,112 is presented as a complete replacement for the base PCA9514D because its terminals, package, and principal performance characteristics are consistent. Both are 8-pin NXP SMBus buffers with a stated 400 kHz operating rate. Before substitution, confirm the original board's packing method and compare the complete datasheet pin description and electrical limits for the exact ordering code.
Where can I download the PCA9514D datasheet PDF?
The official PCA9514D datasheet should be obtained through the NXP product page linked on this page or through the manufacturer datasheet associated with the exact orderable suffix. The NXP product page remains the authoritative source for lifecycle status and documentation access. Archived copies can help engineers review historical material, but the manufacturer document should control pin assignments, timing, limits, and application details.
Where is the PCA9514D pinout?
The PCA9514D pinout is defined in the pin-description section of the manufacturer datasheet for the 8-SO package. Use that table when assigning bus-side pins, enable or control functions, supply, and ground. The public distributor listing confirms an 8-pin SO package, but the complete pin names are not reproduced on this page because they must be taken directly from the exact NXP datasheet revision.
What is the best drop-in replacement for PCA9514D?
PCA9514D,112 is the closest documented drop-in choice because the comparison information states that its terminals and package are completely replaceable and that the main performance characteristics are consistent. PCA9514D,118 is another exact NXP orderable reference with the same 8-SO identity. No broader cross-brand replacement is established by the available product information, so any substitute must be checked independently for pin, voltage, timing, and hot-swap behavior.
Is PCA9514D the same as PCA9514D,118?
PCA9514D,118 is an orderable suffix of the PCA9514D device rather than a functionally different interface type. The listing identifies it as an 8-SO, single-channel, 400 kHz buffer from NXP Semiconductors. The ordering suffix should be checked for packaging details, while the device function remains the same hot-swappable SMBus-buffer role.
When should I choose PCA9514D over a generic I2C buffer?
Choose PCA9514D when a bus branch must tolerate hot connection or removal and the design specifically needs a dedicated single-channel SMBus isolation function. A generic I2C buffer may be preferable for fixed, non-serviceable links or for broader voltage translation, but it may not provide the intended insertion behavior. Confirm the required isolation, enable timing, and electrical limits before making the selection.
Where to buy PCA9514D online?
Use the Request a Quote form on this page to request the PCA9514D and confirm availability, order quantity, and lead time. Because NXP identifies the base device as no longer manufactured, sourcing should include an obsolete-part review and consideration of the documented orderable suffix. Request the current condition and traceable handling information directly through the quote process.
What is the lead time for PCA9514D?
The current lead time for PCA9514D should be confirmed through the Request a Quote form on this page. NXP marks the product as no longer manufactured, so lead time depends on remaining factory supply, authorized-channel availability, and whether the exact suffix is still supported. For production continuity, request lot traceability and a schedule before committing a new build to the device.
Is PCA9514D in stock?
PCA9514D availability is not fixed because NXP identifies the product as discontinued and inventory can vary by suffix. Use the Request a Quote form on this page to request the current stock position, minimum order quantity, and lead time for the exact part number. A quotation response is more reliable than assuming that a distributor search result represents planned factory inventory.
What are the key specifications of PCA9514D that engineers should know?
The key documented characteristics of PCA9514D are one buffered channel, operation up to 400 kHz, support for hot-swappable SMBus isolation, and an 8-SO package. NXP lists the component as no longer manufactured, making lifecycle confirmation essential during design review. Supply voltage, logic thresholds, propagation delay, current, temperature range, and exact pin functions must be taken from the manufacturer datasheet for the selected ordering suffix.
What is the best NXP equivalent for PCA9514D?
PCA9514D,112 is the best-documented NXP equivalent found for the base PCA9514D because the available comparison states that the terminals and package are completely replaceable and that the principal performance characteristics are consistent. It remains an 8-SO, 400 kHz hot-swappable bus-buffer reference. Engineering approval should still include review of the exact ordering suffix and manufacturer application guidance.

داتای سەرچاوەی ئەندازیاری بۆ PCA9514D — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the PCA9514D when maintaining or reproducing a legacy design that uses NXP's dedicated single-channel hot-swappable SMBus buffer in an 8-SO package. It is particularly appropriate when a removable module must be connected or disconnected from a live I2C or SMBus segment and the documented 400 kHz rate meets the system's bus requirement. PCA9514D,112 and PCA9514D,118 are the closest orderable NXP references because the available comparison information identifies matching packages, terminals, and principal performance characteristics. PCA9514AD,118 may also be considered when its exact datasheet and qualification status match the design, although its additional designation requires explicit review. None of these references resolves the broader lifecycle risk by itself: the base product is no longer manufactured. For a new design with different bus voltage, channel count, isolation requirements, or availability constraints, evaluate a currently supported interface buffer rather than assuming that every function-compatible SOIC-8 device is pin-compatible.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PCA9514D,112 PCA9514D,118 PCA9514AD,118
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 8-SO / SOIC-8 8-SO / SOIC-8 8-SO / SOIC-8 8-SO / SOIC-8
Device Type Hot-swappable SMBus buffer Hot-swappable SMBus buffer Hot-swappable SMBus buffer Buffer, accelerator, I2C hot-swap interface
Supported Bus SMBus / I2C SMBus / I2C SMBus / I2C I2C hot-swap interface
Pin Compatibility 8-pin pin arrangement Stated completely replaceable Stated consistent terminals and package Stated consistent terminals and package
Key Ordering Difference Base designation Orderable suffix 112 Orderable suffix 118 Additional AD designation and suffix 118

جیاکەرەوە سەرەکییەکان

  • Purpose-built hot-swappable SMBus isolation (بەراورد بەPCA9514AD,118)
  • Exact 8-pin package continuity for legacy boards (بەراورد بەPCA9514D,118)
  • Documented complete replacement path (بەراورد بەPCA9514D,112)

تێبینییەکانی دیزاین

Route the host-side and isolated-side I2C or SMBus networks as separate branches, with short traces and a continuous ground reference. Place pull-up resistors on the appropriate bus segment according to the manufacturer application diagram; adding them indiscriminately to both sides can produce unintended parallel pull-up strength and alter rise time. Keep connector and cable capacitance away from the host-side routing whenever the PCA9514D is intended to isolate that branch.

Do not treat the PCA9514D as a complete substitute for electrical isolation. The device buffers and isolates the bus path, but it does not necessarily provide galvanic isolation between the two sides. Review the exact datasheet voltage limits, enable behavior, and truth states before using it with independently powered domains. For maintenance-friendly equipment, define a safe sequence that keeps the bus in an inactive state during insertion or removal.

Check the combined capacitance of devices, connectors, and cables against the rise-time budget for the 400 kHz bus. Use the shortest practical routing, maintain a low-impedance return path, and observe the manufacturer's enable timing. When a branch has long wiring or several pull-ups, evaluate the bus with an oscilloscope after hot-plug insertion to check for ringing, excessive overshoot, or an unintended low state.

Preserve the manufacturer's pin and application layout when adapting a legacy PCA9514D board. The 8-SO footprint is only the starting point: enable traces, supply decoupling, pull-up placement, and exposed copper around surrounding circuitry determine whether hot-swap behavior remains reliable. For a transfer to another orderable suffix, compare the complete pin-description table and note any differences in lifecycle, temperature grade, or packing before releasing the PCB files.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available product information identifies the lifecycle state and core interface characteristics but does not provide the package-specific compliance declarations required to populate these fields.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PCA9514D datasheet PCA9514D datasheet pdf PCA9514D pinout PCA9514D equivalent PCA9514D replacement PCA9514D cross reference PCA9514D 400kHz PCA9514D SOIC-8 PCA9514D SMBus buffer PCA9514D hot swap PCA9514D price PCA9514D stock

پێکهاتە و زاراوە پەیوەندیدارەکان

NXP Semiconductors PCA9514D PCA9514D,112 PCA9514D,118 PCA9514AD,118 hot-swappable bus buffer SMBus buffer I2C interface bus buffer bus accelerator interface IC semiconductor SOIC-8 8-SO package surface-mount package 400 kHz bus rate hot-plug isolation single-channel buffer industrial data acquisition board-to-board communication removable sensor module legacy-system maintenance
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ