PCM1771PW - 24-Bit Stereo Audio DAC with Headphone Amp | TI
MPN: PCM1771PW ✓ چالاکPCM1771PW گشتی
The PCM1771 belongs to the audio DAC hierarchy: DAC → digital-to-analog converter → audio signal converter → mixed-signal semiconductor. This integration is valuable in compact portable audio products because a separate headphone-output amplifier and output-filter stage are not required for a basic line-output or headphone-driving topology. The TI product page states that the converters use an enhanced multilevel architecture with noise shaping and multilevel amplitude quantization to improve dynamic performance.
Principal specifications identified for PCM1771PW include a 24-bit resolution, a 50 kSPS maximum sampling rate, I2S serial audio support, and a 1.6 V to 3.6 V operating supply range. Distributor listings also identify a typical dynamic range of 98 dB. These characteristics place the converter in the low-power, portable-audio class while providing enough resolution for CD-compatible 44.1 kHz playback and higher-rate digital audio sources.
The integrated headphone circuitry provides two analog output paths for stereo playback. Exact output-current limits, headphone-output THD+N under defined load conditions, and pin-level signal names are not stated in the available product listings, so engineers should confirm them in the manufacturer data sheet before setting output gain, loading, or PCB routing. Digital audio is accepted through the serial interface, while the analog side requires appropriate output filtering, decoupling, and return-path layout.
Typical PCM1771PW applications include portable digital audio players, compact USB or Bluetooth audio accessories, digital mixing consoles, portable audio monitors, and USB-controlled headphone amplifiers. The low operating-voltage range allows connection to 1.8 V, 2.5 V, or 3.3 V system rails, while the TSSOP-16 footprint supports compact, high-density layouts. Use the pin-description table and recommended application circuit in the PCM1771 data sheet when assigning nets and selecting bypass capacitors.
This page combines the confirmed PCM1771PW specifications, package information, sourcing evidence, and practical design guidance with an explicit separation between published facts and values that still require confirmation. It is intended to accelerate initial component selection while directing final schematic and layout approval to the authoritative Texas Instruments documentation.
جێگرەوەکانی جێگۆڕکێ بۆ PCM1771PW — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PCM1771PW (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Architecture, Digital Audio Interface.
PCM1770PW
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PCM1771PW زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Stereo audio digital-to-analog converter with integrated headphone amplifier |
| Manufacturer | Texas Instruments |
| DAC Resolution | 24 bit |
| DAC Channels | 2 channels |
| Maximum Sampling Rate | 50 kSPS |
| Digital Audio Interface | I2S serial audio |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.6 V to 3.6 V |
| Typical Signal-to-Noise Ratio | 98 dB |
| Architecture | Enhanced multilevel DAC architecture with noise shaping and multilevel amplitude quantization |
| Process Technology | CMOS |
| پاکێج | 16-pin TSSOP |
| جۆری دامەزراندن | Surface mount |
| Analog Outputs | 2 channels |
| Analog Inputs | 0 channels |
| Integrated Headphone Amplifier | Yes |
| DigiKey Product Classification | Audio DAC, 24 bit, 50 kSPS, I2S, 16-TSSOP |
ڕێنمایی ڕێکخستنی پینی PCM1771PW 16-pin tssop
ڕێکخستنی پین بۆ PCM1771PW (پاکێجی 16-pin tssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PCM1771PW.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PCM1771PW گونجاوە بۆ 6 بەکارھێنانs: Portable Digital Audio Player, Bluetooth and USB Audio Accessory, Digital Mixing Console Output Stage, Compact USB Headphone Amplifier, Digital Audio Monitoring Module, Low-Power Multimedia Audio Hub.
Portable Digital Audio Player
The PCM1771PW fits portable digital audio players that need stereo conversion and headphone drive from a low-voltage system. Its 24-bit resolution, 50 kSPS maximum sampling rate, and 1.6 V to 3.6 V supply range are appropriate for CD-rate playback and other moderate-rate digital sources. Integrating the headphone circuitry beside the DAC reduces the number of separate analog functions on a crowded board. Layout should place the serial interface away from headphone outputs, keep the exposed supply and ground connections well decoupled, and follow the manufacturer's recommended output-filter network to control high-frequency noise.
پێشنیارکراو
Bluetooth and USB Audio Accessory
PCM1771PW is suitable for a Bluetooth or USB audio accessory that receives digital samples and drives analog headphones. The I2S serial interface, two-channel 24-bit conversion, and integrated headphone circuitry cover the essential signal path in a compact 16-pin TSSOP footprint. A 1.8 V or 3.3 V rail can supply the converter where those levels are supported by the complete design. Keep the I2S clock and data traces short, provide local bypass capacitance at the supply pins, and isolate analog headphone routing from high-current wireless or USB circuitry.
پێشنیارکراو
Digital Mixing Console Output Stage
The PCM1771PW can serve a console output or monitor channel requiring a 24-bit stereo digital-to-analog conversion function. Its 50 kSPS rate supports standard digital-audio workflows, while the integrated headphone circuitry allows a local cue or monitoring path without adding a separate output converter. Keep each output's analog filtering local to the device and route analog signals away from switching regulators and clock-generating circuitry. Verify the required line-output drive level and external attenuation network against the data-sheet analog-output specifications before finalizing the mixer gain structure.
پێشنیارکراو
Compact USB Headphone Amplifier
PCM1771PW is well matched to a compact USB headphone amplifier requiring an I2S-compatible digital input and stereo analog output. The 24-bit converter, 50 kSPS maximum rate, and integrated headphone circuitry support a streamlined analog chain in a small TSSOP-16 footprint. A 1.6 V to 3.6 V operating range permits use with low-voltage USB audio designs when system timing and supply sequencing are coordinated correctly. Treat the headphone outputs as sensitive analog nodes, use short traces, provide the prescribed bypass capacitors, and confirm the allowable load impedance before connecting the output stage.
پێشنیارکراو
Digital Audio Monitoring Module
PCM1771PW can be used in a digital monitoring module that converts a stereo digital stream into analog signals for headphones or an external analog stage. The 50 kSPS rate, 24-bit word length, and I2S interface make it suitable for basic multichannel monitoring after an appropriate channel mixer. Its integrated headphone circuitry can simplify local cue amplification. Keep clock routing short, provide a continuous ground reference beneath the analog section, and apply the data sheet's recommended analog output filters. Confirm output headroom and headphone drive limits for the specific monitoring level expected in operation.
پێشنیارکراو
Low-Power Multimedia Audio Hub
PCM1771PW is applicable to a low-power multimedia audio hub that accepts digital audio and supplies stereo headphone outputs. The device's low-voltage operation, integrated headphone circuitry, and 16-pin TSSOP package support space-constrained portable systems, while the 24-bit conversion and 50 kSPS ceiling cover conventional digital-audio rates. Integrate the converter close to the connector or codec that sources the digital stream, and keep switching-regulator paths away from the analog outputs. Use the manufacturer's power-up sequence and decoupling recommendations to prevent output transients when the portable system changes operating state.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PCM1771PW — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PCM1770PW |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 16-pin TSSOP | 16-pin TSSOP |
| DAC Channels | 2 channels | 2 channels |
| Integrated Headphone Amplifier | Yes | Yes, per PCM177x family description |
جیاکەرەوە سەرەکییەکان
- Higher confirmed sampling-rate ceiling for PCM1771PW (بەراورد بەPCM1770PW)
- Explicit low-voltage operation for portable systems (بەراورد بەPCM1770PW)
- Integrated converter and headphone circuitry (بەراورد بەPCM1770PW)
تێبینییەکانی دیزاین
Route the I2S clock, data, and latch signals as a compact digital group and keep them away from the headphone-output traces. Place the manufacturer-recommended bypass capacitors beside the supply and ground pins, use a continuous ground reference under the analog section, and connect analog returns directly to the device ground rather than through the logic return path. These measures reduce digital coupling into the stereo outputs.
Do not select a replacement from package appearance alone. PCM1771PW uses a 16-pin TSSOP, but a mechanically identical package does not guarantee compatible serial-interface timing, control-register behavior, output topology, or enable logic. Compare the complete pin-description and functional tables for PCM1771 and the candidate, and verify that the candidate supports the intended sample rate, supply voltage, and output load before releasing the PCB.
Design the supply network around the confirmed 1.6 V to 3.6 V operating range and follow the data sheet's application circuit for bypass capacitance and startup sequencing. Headphone output current changes with load impedance and output voltage, so include analog-output drive in the power-budget analysis rather than considering only the digital section. Keep regulator switching loops under the analog area and use a short, low-impedance return to the device ground pin.
زانیاری پابەندبوون
The available product listings identify the PCM1771PW as a Texas Instruments 16-pin TSSOP audio DAC but do not state RoHS, REACH, halogen-free, or conflict-minerals status. Verify compliance using the manufacturer product page and the latest ordering information for the selected orderable code.