Texas Instruments

ADS7854IPW - Dual 14-Bit 1-MSPS SAR ADC | Texas Instruments

MPN: ADS7854IPW ✓ چالاک
16-pin TSSOP Package
MOQ: 1 |

ADS7854IPW گشتی

Texas Instruments ADS7854IPW is a dual, 14-bit, 1-MSPS successive-approximation analog-to-digital converter with simultaneous sampling, fully differential analog inputs, and a 16-pin TSSOP package. The device converts two differential input channels at the same time, making it suitable for phase-sensitive measurement, vibration analysis, instrumentation, and industrial control systems. Its two independently programmable reference sources support system-level gain calibration, while its flexible serial interface operates across a wide supply-voltage range.

A SAR ADC is a successive-approximation register analog-to-digital converter. It compares the input voltage against a DAC-derived reference through a binary search process, producing a digital code after a fixed sequence of comparison cycles. The ADS7854 belongs to the SAR ADC hierarchy within analog-to-digital converters and data-converter ICs, where its fully differential inputs and simultaneous-sampling architecture distinguish it from multiplexed single-channel converters.

The principal features of the ADS7854IPW are dual simultaneous sampling at 1 MSPS, 14-bit conversion resolution, two differential inputs, two individually programmable reference sources, and a flexible serial interface. Simultaneous sampling preserves the timing relationship between channels, which is important when calculating phase, gain, or transfer-function characteristics. Differential inputs also help reject common-mode noise when paired with suitable analog front-end circuitry.

Each conversion uses an internal sampling-and-hold stage followed by successive-approximation conversion. This architecture provides predictable sampling behavior without the pipeline latency associated with some high-speed converter types. The two conversion results are transferred through the serial interface in a frame that preserves the relationship between the sampled channels. For system-level gain calibration, the programmable references can be set independently for the two analog channels.

Typical uses include industrial data acquisition, vibration monitoring, motor-current analysis, power-system instrumentation, and dual-channel sensor measurement. The fully differential input architecture is especially useful when the source has low amplitude or when common-mode rejection is required. Designers must still provide suitable input filtering, reference bypassing, grounding, and source-impedance control to achieve predictable conversion performance.

For layout, place input, reference, and decoupling components close to their associated pins, and use a quiet ground strategy for the analog section. Keep digital-clock and serial-data routing away from sensitive analog inputs. The serial-interface timing and the power-supply requirements should be evaluated together because converter noise and source impedance can influence code accuracy.

This page combines the manufacturer’s device description with package, application, interface, and replacement guidance. It organizes the ADS7854IPW’s dual-channel SAR conversion characteristics into practical information for designing, sourcing, and maintaining industrial measurement systems.

جێگرەوەکانی جێگۆڕکێ بۆ ADS7854IPW — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS7854IPW (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Resolution.

Texas Instruments
Resolution: 12 bit
بەراوردکردن لەگەڵ ADS7854IPW →

ADS8354

✅ جێگرەوەی ڕاستەوخۆ
📦 16-pin TSSOP
Same pin-compatible dual differential SAR ADC family; ADS8354 family-member ratings differ, requiring resolution, speed, and supply verification

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADS7254

✅ جێگرەوەی ڕاستەوخۆ
📦 16-pin TSSOP
Same pin-compatible dual differential SAR ADC family; ADS7254 family-member ratings differ, requiring resolution, speed, and supply verification

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADS7854IPW زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

ADC Type Successive-approximation register (SAR) ADC
وردی 14 bit
ڕێژەی نموونەگرتن 1 MSPS per channel
Number of Channels 2 channels
Input Type Fully differential
Sampling Mode Simultaneous sampling
Architecture Dual SAR ADC
Reference Sources 2 individually programmable reference sources
جۆری ڕووکار Flexible serial interface
پاکێج 16-pin TSSOP
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی ADS7854IPW 16-pin tssop

ڕێکخستنی پین بۆ ADS7854IPW (پاکێجی 16-pin tssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 16-pin tssop بۆ ADS7854IPW

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS7854IPW.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS7854IPW گونجاوە بۆ 6 بەکارھێنانs: Industrial Vibration Monitoring, Motor Current and Phase Analysis, Power System Instrumentation, Precision Data Acquisition, Sensor Interface Systems, Test and Measurement Equipment.

🏭

Industrial Vibration Monitoring

The ADS7854IPW suits dual-axis vibration monitoring because it samples two fully differential channels simultaneously at up to 1 MSPS. Simultaneous acquisition preserves the phase relationship between accelerometer or strain-gauge signals, allowing the system to calculate displacement, vibration amplitude, and directional behavior without sequential-channel timing error. Each channel can use an independently programmable reference for gain calibration. The analog front end should provide low-noise amplification, anti-alias filtering, and source impedances appropriate for the converter’s sampling network.

🔧

Motor Current and Phase Analysis

The ADS7854IPW can capture a motor-current waveform and a synchronized control or position signal because its two channels sample simultaneously at 1 MSPS. Differential inputs suit current shunts and isolated sensor front ends when the signal remains within the converter’s analog input range. The independently programmable references support channel-level gain calibration, while the 14-bit code width provides 16,384 nominal digital levels per conversion. Input filtering and amplifier selection must preserve bandwidth and avoid saturating the ADC front end.

⚡

Power System Instrumentation

The ADS7854IPW is appropriate for synchronized acquisition of two quantities such as voltage and current in industrial power-monitoring equipment. Its two differential inputs reduce common-mode disturbance when paired with suitable sensing circuits, and simultaneous sampling improves phase measurement accuracy. The 1-MSPS conversion rate is useful for waveform analysis, while 14-bit resolution supports quantitative measurement beyond simple threshold detection. Carefully isolate high-voltage sensing paths and keep switching supplies and digital interfaces away from the analog input traces.

🖥️

Precision Data Acquisition

The ADS7854IPW supports general-purpose dual-channel data acquisition where correlated analog values must be captured at the same instant. A 14-bit resolution and 1-MSPS rate provide a practical balance between measurement detail, throughput, and interface complexity. Two independently programmable reference sources allow each analog channel to be scaled or calibrated independently. For laboratory and process-control systems, use separate analog and digital grounding strategies, low-noise reference routing, and matched filtering to obtain repeatable code results.

🧩

Sensor Interface Systems

The ADS7854IPW can digitize two differential sensor outputs simultaneously when the source amplitude and bandwidth match the analog input range. Bridge, pressure, temperature, or strain sensors often benefit from differential acquisition because common-mode rejection reduces coupling from shared power and ground systems. Independent reference programming helps compensate channel gain differences, and simultaneous sampling simplifies compensation using a shared time base. The conditioning circuit must provide adequate settling behavior and keep sensor excitation noise outside the selected measurement bandwidth.

🔧

Test and Measurement Equipment

The ADS7854IPW is useful in portable or benchtop instrumentation that acquires two related analog signals at a common instant. Simultaneous 1-MSPS sampling supports transfer-function measurements, gain comparison, and synchronized waveform capture, while 14-bit resolution limits quantization error. The flexible serial interface can simplify connection to a controller operating across compatible supply conditions. Reference accuracy, clock jitter, source settling, and PCB leakage can all influence effective precision and should be evaluated as a complete analog chain.

What is the ADS7854IPW?
The ADS7854IPW is a dual, 14-bit, 1-MSPS SAR analog-to-digital converter with simultaneous sampling and fully differential inputs. According to the Texas Instruments ADS7854 product page, the converter belongs to a family that also includes the ADS8354 and ADS7254, uses two individually programmable references for system-level gain calibration, and provides a flexible serial interface. It is packaged in a 16-pin TSSOP for surface-mount industrial and instrumentation designs.
How many ADC channels does ADS7854IPW have?
The ADS7854IPW contains two SAR conversion channels and samples both channels simultaneously at 1 MSPS per channel. Texas Instruments describes it as a dual, differential-input, simultaneous-sampling converter. Simultaneous acquisition is useful when phase, gain, vibration, or time-domain relationships between two sensors must be preserved. Each channel also has an individually programmable reference source, allowing system-level gain calibration of the two analog channels.
What is the resolution and sampling rate of ADS7854IPW?
The ADS7854IPW provides 14-bit resolution and a maximum sampling rate of 1 MSPS for each of its two channels. According to the Texas Instruments ADS7854 product description, both channels use a simultaneous-sampling SAR architecture. This combination is appropriate for precision waveform capture and dual-channel measurement systems that require consistent channel timing while operating at up to one million conversions per second.
What is the difference between ADS7854IPW and ADS8354?
The ADS7854IPW and ADS8354 are members of the same Texas Instruments family of dual, high-speed, simultaneous-sampling SAR ADCs with fully differential inputs and programmable references. Their exact electrical differences must be checked in the manufacturer’s ordering information before substitution. The published family description identifies them as pin-compatible within the ADS8354, ADS7854, and ADS7254 group, making the family relationship useful for PCB planning while the device-specific specifications determine final qualification.
What is the difference between ADS7854IPW and ADS7254?
The ADS7854IPW and ADS7254 are pin-compatible members of a Texas Instruments family containing dual, high-speed, simultaneous-sampling ADCs with fully differential analog inputs. Both provide individually programmable references and a flexible serial interface, but resolution, sampling rate, and other ratings can differ between family members. Use the device-specific data sheet and ordering table to confirm the exact parameters before using either part as a replacement.
Where can I download the ADS7854IPW datasheet PDF?
The official ADS7854IPW datasheet can be accessed from the Texas Instruments product page at https://www.ti.com/product/ADS7854. The same page provides the device description, technical parameters, ordering information, and links to manufacturer documentation. The verified part-details page at https://www.ti.com/product/ADS7854/part-details/ADS7854IPW identifies the ADS7854IPW ordering variant and provides additional ordering information.
Where is the ADS7854IPW pinout located?
The ADS7854IPW pinout is located in the pin-configuration section of the Texas Instruments ADS7854 manufacturer datasheet. The device uses a 16-pin TSSOP package, and the package drawing identifies the physical terminal arrangement. Use that pin-description table when assigning analog inputs, references, supplies, clock, and serial-interface signals; do not infer signal assignments from the generic package outline.
When should I choose ADS7854IPW over another dual SAR ADC?
Choose the ADS7854IPW when the design needs two simultaneously sampled differential channels, 14-bit conversion resolution, and a 1-MSPS sampling rate in a 16-pin TSSOP. Its two individually programmable references are valuable for channel-level gain calibration. Choose another member of the ADS8354, ADS7854, and ADS7254 family only when its specific resolution, speed, supply, interface, or power characteristics better match the application and its pin compatibility is confirmed.
Is ADS7854IPW suitable for vibration and motor-current measurement?
The ADS7854IPW is well suited to dual-channel vibration and motor-current measurements because it samples two differential inputs simultaneously at up to 1 MSPS. Simultaneous sampling preserves timing information between channels, while the differential input structure supports rejection of common-mode disturbance when the analog front end is designed appropriately. The maximum usable bandwidth still depends on input filtering, source impedance, signal amplitude, and the acquisition system’s analog bandwidth.
How should the ADS7854IPW be used for gain calibration?
The ADS7854IPW can use its two individually programmable reference sources for system-level gain calibration. Each reference channel can be adjusted to establish the conversion scale associated with its analog path. Texas Instruments identifies this capability as part of the shared ADS8354, ADS7854, and ADS7254 family architecture. The calibration procedure should account for reference accuracy, temperature drift, ADC linearity, and the gain contribution of the external analog front end.
What is the best drop-in replacement for ADS7854IPW?
The closest documented drop-in candidates are the pin-compatible ADS8354 and ADS7254 devices identified on the Texas Instruments ADS7854 part-details page, provided their ordering packages and device-specific ratings match the original design. The manufacturer describes all three as members of one pin-compatible family, but the exact suffix, package, resolution, speed, and electrical limits must be compared before replacement. A production substitution should be approved against both datasheets and representative hardware.
Can ADS8354 or ADS7254 replace ADS7854IPW?
ADS8354 and ADS7254 can be candidates for replacing ADS7854IPW because Texas Instruments identifies the ADS8354, ADS7854, and ADS7254 as pin-compatible family members. They share the dual, fully differential, simultaneous-sampling architecture and programmable-reference concept. They are drop-in alternatives only when their exact package suffix and key ratings satisfy the original circuit requirements, so verify pin assignment, supply range, conversion speed, resolution, and interface behavior before substitution.
What can replace ADS7854IPW?
ADS8354 and ADS7254 are the direct same-brand candidates to evaluate as replacements for ADS7854IPW because the manufacturer places all three in a pin-compatible family. Their common dual-differential SAR architecture makes them the natural starting point for PCB reuse. No cross-brand drop-in candidate is documented in the available substitution results, so a foreign-manufacturer replacement should not be treated as qualified without independent pin and electrical verification.
Is ADS7854IPW the same as ADS8354?
The ADS7854IPW and ADS8354 are closely related, pin-compatible members of one Texas Instruments simultaneous-sampling ADC family, but they should not be assumed electrically identical. The family description confirms shared dual fully differential inputs, programmable references, and a flexible serial interface. Device-specific resolution, conversion-rate, supply, power, timing, and package-ordering details determine whether the selected ADS8354 suffix is a drop-in replacement.
Where can I buy ADS7854IPW and what is the current lead time?
The ADS7854IPW can be requested through the Request a Quote form on this page, where the current commercial terms, quantity requirements, and lead time should be confirmed. The manufacturer lists ADS7854IPW as an active ordering option in a 16-pin TSSOP package. Because production schedules and inventory can change, request a current quotation rather than relying on an archived price or a historical distributor listing.
What are the key specifications of ADS7854IPW that engineers should know?
The key ADS7854IPW specifications are 14-bit resolution, 1-MSPS sampling for each of two channels, simultaneous dual-channel acquisition, fully differential inputs, and two individually programmable reference sources. According to the Texas Instruments product description, the device also uses a flexible serial interface and is offered in a 16-pin TSSOP package. These characteristics make it suitable for synchronized dual-channel industrial measurement, vibration monitoring, instrumentation, and motor-analysis systems.

داتای سەرچاوەی ئەندازیاری بۆ ADS7854IPW — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADS7854IPW when synchronized measurement of two differential signals at 14 bits and 1 MSPS per channel is the central requirement. Its simultaneous sampling is valuable for phase, gain, vibration, motor-current, and power-system measurements, while the two programmable references support independent channel calibration. ADS8354 is a logical same-family candidate when its exact resolution and throughput better match the design, and ADS7254 is another pin-compatible family option whose device-specific ratings should determine suitability. For ultra-low-noise, lower-speed measurements, a precision ADC such as ADS1262IPW may be preferable because it prioritizes resolution and noise rather than the ADS7854’s 1-MSPS dual-channel throughput. Confirm package suffix, supply range, interface timing, absolute maximum ratings, and acquisition requirements before releasing a substitution or new design.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADS8354 ADS7254
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP family option 16-pin TSSOP family option
ADC Architecture Dual SAR ADC Dual SAR ADC Dual SAR ADC
Number of Channels 2 channels 2 channels 2 channels
Input Type Fully differential Fully differential Fully differential
Sampling Mode Simultaneous sampling Simultaneous sampling Simultaneous sampling
Reference Sources 2 individually programmable references Individually programmable references Individually programmable references
Serial Interface Flexible serial interface Flexible serial interface Flexible serial interface

جیاکەرەوە سەرەکییەکان

  • Dual-channel simultaneous sampling preserves inter-channel timing (بەراورد بەADS8354)
  • Programmable references support channel-level calibration (بەراورد بەADS7254)
  • 14-bit resolution at a 1-MSPS per-channel rate (بەراورد بەADS8354)

تێبینییەکانی دیزاین

Place the input, reference, and supply-decoupling components close to their corresponding pins. Route differential input pairs as tightly coupled traces with continuous reference-plane support and avoid routing them beneath digital clock or serial-data paths. The ADS7854IPW has two differential channels, so keeping both analog paths symmetric helps reduce differences in timing, attenuation, and susceptibility to common-mode disturbance. Verify the physical pin assignments against the manufacturer’s 16-pin TSSOP drawing before laying out the board.

Design the analog front end so each source can settle correctly for the SAR sampling network. Use an appropriate low-noise amplifier, limit source impedance, and include an antialias filter whose impedance remains suitable at the converter’s maximum acquisition rate. Because the device samples two channels simultaneously, apply consistent bandwidth and phase behavior to both signal paths when phase relationships matter. Keep the sample-and-hold return path short and isolate the reference network from noisy digital return currents.

Separate analog and digital supply paths as closely as the device architecture and datasheet recommendations allow. Place local high-frequency bypass capacitors at the supply pins and use additional bulk capacitance where the upstream regulator or wiring requires it. Reference voltage stability directly influences conversion scale, so use a clean reference source and short routing. Check startup, supply sequencing, and power-consumption requirements against the exact family-member data sheet before finalizing the power architecture.

Do not assume that family pin compatibility guarantees identical behavior or exact drop-in status. ADS8354 and ADS7254 are candidates because Texas Instruments groups them with ADS7854 as pin-compatible devices, but the exact ordering suffix, package, supply range, resolution, conversion speed, reference limits, and interface timing must be checked before substitution. Also avoid driving the differential inputs beyond their absolute maximum ratings or allowing signal transients to exceed the analog pin limits.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance declarations were not identified in the manufacturer and distributor pages retrieved for the ADS7854IPW. Confirm the exact ordering suffix with the manufacturer before applying an environmental or automotive qualification claim.

داتا پشتڕاستکراوەتەوە لە: 2026-11-18 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS7854IPW datasheet ADS7854IPW pinout ADS7854IPW datasheet pdf ADS7854IPW equivalent ADS7854IPW replacement ADS7854IPW price ADS7854IPW stock Texas Instruments ADS7854IPW ADS7854 16-TSSOP pinout ADS7854IPW application circuit ADS7854IPW vs ADS8354 ADS7854IPW vs ADS7254 ADS7854 dual differential SAR ADC ADS7854IPW 1 MSPS 14 bit

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS7854IPW ADS7854 ADS8354 ADS7254 ADS1262IPW ADS1131IDR SAR ADC successive-approximation register analog-to-digital converter dual ADC fully differential input simultaneous sampling 1 MSPS 14-bit resolution programmable reference serial interface 16-pin TSSOP TSSOP package family surface mount industrial measurement vibration monitoring motor-current analysis power-system instrumentation system-level gain calibration
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ