Microchip Technology

PIC16F1455-I/P - 48MHz 8-Bit USB MCU | Microchip

MPN: PIC16F1455-I/P ✓ چالاک
14-pin PDIP Package 48 MHz Speed 14 KB Flash (8K x 14) Memory
MOQ: 1 |

PIC16F1455-I/P گشتی

The Microchip Technology PIC16F1455-I/P is an 8-bit PIC16 flash microcontroller operating up to 48 MHz, with 14 KB of Flash program memory, 1024 bytes of data RAM, and a 14-pin PDIP package. It integrates a 5-bit and 10-bit conversion interface, a 48 MHz internal oscillator, and a USB 2.0 module with clock recovery for USB-connected control and data-acquisition equipment.

A microcontroller is a programmable integrated circuit containing a processor core, memory, timers, serial interfaces, and input/output peripherals. It belongs to the PIC16 family and combines an 8-bit RISC architecture with flash-based firmware storage. The PIC16F1455-I/P occupies the microcontroller hierarchy above embedded controller and is intended for compact systems that need moderate processing speed, USB connectivity, and flexible digital and analog I/O.

The device provides 14,336 bytes of Flash memory organized as 8K by 14 program words, plus 1024 bytes of SRAM for working data. Its internal 48 MHz oscillator eliminates the need for an external clock in many designs. The family provides 49 instructions, a 16-level stack, and self-read/write capability, while High Endurance Flash supports 128 bytes of non-volatile data storage. USB 2.0 with clock recovery enables direct host connectivity.

The PIC16F1455-I/P combines an enhanced mid-range CPU core with integrated USB and mixed-signal capabilities. Five-bit and 10-bit conversion features support applications that need sensed inputs alongside digital control. Flash firmware permits field reconfiguration without removable media, and the internal oscillator reduces board area and component count compared with designs requiring an external timing source.

Typical uses include USB-connected sensor nodes, compact USB data loggers, USB interface cards, embedded instrumentation, and industrial control modules that require a 14-pin through-hole microcontroller. The 14-pin PDIP package also simplifies prototype assembly, inspection, and hand rework compared with fine-pitch surface-mount packages.

When designing the board, reserve the programming and debug interface pins, route the USB differential pair as a controlled impedance connection, and place input and output decoupling capacitors close to the supply pins. Confirm oscillator start-up behavior, watchdog settings, and USB clock-recovery configuration in the system firmware. The same family is also available in different package and temperature-grade configurations, so the exact ordering suffix must match the PCB and operating environment.

This product page consolidates the core Flash, RAM, timing, conversion, USB, package, and sourcing details for the PIC16F1455-I/P while adding practical PCB guidance, pin-level design guidance, and a focused comparison with same-footprint family alternatives.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1455-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1455-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Operating Temperature, Timers, I/O Pins.

Microchip Technology
Package: 14-pin PDIP (P)
ADC: 10-bit, up to 9 channels
Timers: 3 (Timer0, Timer1, Timer2)
Microchip Technology
Package: 14-pin PDIP
Microchip Technology
Package: 14-SOIC (SL), 0.154 in / 3.90 mm body width
ADC: 8-bit and 10-bit modules
Operating Temperature: -40 °C to +125 °C (Industrial, E suffix)
Microchip Technology
Package: 14-pin SOIC (SL)
ADC: 5-channel 10-bit
Operating Temperature: -40 C to +85 C (Industrial, -I suffix)
Microchip Technology
Package: 20-pin PDIP (0.300 inch / 7.62 mm)
ADC: 10-bit, up to 9 channels, 100 ksps
Operating Temperature: -40 C to +85 C (Industrial)
Microchip Technology
Package: 20-PDIP (P)
Operating Temperature: -40C to +125C
Microchip Technology
Package: 20-pin PDIP (P), through-hole
ADC: 10-bit, up to 12 channels
Timers: 3x 8-bit, 1x 16-bit
Microchip Technology
Package: 20-pin PDIP (through-hole)
ADC: 10-bit, up to 12 channels
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
Package: 14-pin PDIP (through-hole)
ADC: 10-bit
Operating Temperature: -40C to +85C (industrial)
Microchip Technology
Package: 14-pin PDIP (P)
ADC: 10-bit, with computation
I/O Pins: 12 (PDIP-14)
Microchip Technology
Package: 14-pin PDIP (P)
Timers: 7
I/O Pins: 11
Microchip Technology
Package: 14-pin PDIP (300 mil, 7.62 mm)
ADC: 10-bit, up to 9 channels
Operating Temperature: -40 °C to +85 °C (industrial)

PIC16F1455-E/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 14-pin PDIP
8-bit Flash Microcontroller · PIC16 RISC · 48 MHz · 14 KB (8K x 14 bits) · Flash · 1024 bytes · 0 bytes · 12 pins

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F1454-I/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 14-pin PDIP
8-bit Flash microcontroller · Enhanced mid-range PIC16 RISC core · 48 MHz · 200 ns · 49 instructions · 16 levels · 14 KB (8K x 14) · 1 KB

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F1459-I/P

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 14-pin PDIP
PIC16 enhanced mid-range 8-bit RISC · 49 instructions · 48 MHz · 14 KB (8K x 14 words) · 1 KB · None (uses HEF NVM instead) · 128 bytes · 16

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F1454-E/P

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 14-pin PDIP
Enhanced mid-range 8-bit PIC16 RISC · 14-bit · 48 MHz · 14 KB (8K x 14) · 1024 bytes · 256 bytes (high-endurance Flash, 100k cycles) · 12 · 10-bit, up to 9 channels

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F1459-E/P

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 14-pin PDIP
PIC · 8-Bit · PIC XLP 16F · 14 KB (8K x 14) · FLASH · 1 KB · 128 bytes · 48 MHz

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F1455-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Processor Architecture 8-bit PIC16 RISC
Maximum CPU Frequency 48 MHz
Program Memory Size 14 KB Flash (8K x 14)
Program Memory Type Flash
Data RAM 1024 bytes
Internal Oscillator 48 MHz
Instruction Set 49 instructions
Hardware Stack 16 levels
ADC Resolution 10-bit
Comparator Resolution 5-bit
USB Interface USB 2.0 with clock recovery
High Endurance Flash 128 bytes non-volatile data storage
Flash Self Read/Write Supported
پاکێج 14-pin PDIP
Process Technology CMOS
جۆری دامەزراندن Through-hole

ڕێکخستنی پینی PIC16F1455-I/P

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
پین 1 VDD — Positive supply voltage
پین 2 MCLR/VPP — Program voltage and master clear input
پین 3 RA0/AN0/ULPWU/C12IN0- — RA0 digital input and output; AN0 analog input; comparator and timer-related alternate functions
پین 4 RA1/AN1/ULPWU/C12IN1+ — RA1 digital input and output; AN1 analog input; comparator and timer-related alternate functions
پین 5 RA2/AN2/VREF-/CVREF — RA2 digital input and output; AN2 analog input; negative reference and comparator reference functions
پین 6 RA3/AN3/VREF+/C1IN+ — RA3 digital input and output; AN3 analog input; positive reference and comparator input functions
پین 7 RA4/T0CKI/C1OUT — RA4 digital input and output; timer clock input and comparator output functions
پین 8 RA5/AN4/FBIN/SS — RA5 digital input and output; AN4 analog input; feedback and serial-select alternate functions
پین 9 VSS — Ground reference
پین 10 RB0/AN12 — RB0 digital input and output; AN12 analog input
پین 11 RB1/AN10 — RB1 digital input and output; AN10 analog input
پین 12 RB2/AN8 — RB2 digital input and output; AN8 analog input
پین 13 RB3/AN9/PGM — RB3 digital input and output; AN9 analog input; low-voltage programming function
پین 14 VDD — Positive supply voltage

بەکارهێنانە باوەکان

PIC16F1455-I/P گونجاوە بۆ 6 بەکارھێنانs: USB Sensor Interface, Compact USB Data Logger, Industrial Control Module, USB Test Adapter, Educational Electronics Platform, USB Connected Control Panel.

🧩

USB Sensor Interface

The PIC16F1455-I/P fits a USB sensor interface because its 48 MHz internal oscillator provides timing for sampling and control without an external crystal, while the integrated USB 2.0 module simplifies host connectivity. The 10-bit conversion capability supports analog sensor conditioning, and the 14-pin PDIP format keeps prototyping and rework straightforward. Firmware can sample inputs, apply calibration, and return measurements over USB. Designers should confirm converter channel assignment, use appropriate input conditioning, and route the USB differential pair as a controlled-impedance connection.

🖥️

Compact USB Data Logger

The PIC16F1455-I/P can serve as the control and communications device in a compact data logger, combining an 8-bit processor, 14 KB Flash, 1024 bytes of RAM, and USB 2.0 with clock recovery. Its internal 48 MHz clock simplifies the hardware while the 16-level stack and 49-instruction set support event-driven acquisition firmware. The 128-byte High Endurance Flash area is useful for configuration or counters, although sustained logging may require external storage. Validate sustained USB throughput, bus-power requirements, and write endurance before production.

🏭

Industrial Control Module

The PIC16F1455-I/P is suitable for a compact industrial control module that coordinates digital inputs, analog measurements, timing functions, and USB service communication. Its CMOS 8-bit architecture operates up to 48 MHz, providing enough performance for supervisory logic, state machines, and actuator-control firmware. The 14-pin PDIP package supports through-hole assembly and field replacement. The industrial-grade ordering suffix should be matched to the enclosure temperature, while isolation, surge protection, grounding, and safe-state behavior must be designed separately around the MCU.

🔧

USB Test Adapter

A USB test adapter can use the PIC16F1455-I/P to convert host commands into configuration or test-control signals. The integrated USB interface handles enumeration and data transfer, while the 48 MHz internal oscillator supplies deterministic timing for sequencing measurements without adding an external oscillator. The 10-bit conversion feature supports analog test points, and 1024 bytes of RAM accommodates working buffers and protocol state. Firmware should include timeouts, fault handling, and device identification, while the PCB should provide controlled USB routing and robust connector protection.

💡

Educational Electronics Platform

The PIC16F1455-I/P is well suited to educational electronics because it combines a familiar 8-bit architecture with a 48 MHz internal oscillator, 14 KB Flash, and USB connectivity in an accessible 14-pin PDIP package. Students can program the device in circuit, experiment with timers, converters, interrupts, and USB communication, and use the through-hole package on removable development boards. The PIC16F1455-I/P is suitable for USB sensor nodes, compact data loggers, educational platforms, test adapters, and small industrial controllers where through-hole assembly and a wide internal clock range are valuable.

📱

USB Connected Control Panel

The PIC16F1455-I/P can implement a USB-connected control panel for laboratory equipment or small automation systems. It can read panel inputs, process status indicators, apply timers, and exchange configuration commands with a host through the integrated USB 2.0 module. Its 48 MHz internal clock supports responsive control logic without a separate clock source, and its 14-pin PDIP package simplifies prototype construction. Production designs should add suitable input conditioning, output protection, controlled USB routing, and firmware recovery provisions for connector removal or bus-power faults.

What are the key specifications of PIC16F1455-I/P that engineers should know?
The PIC16F1455-I/P is an 8-bit flash microcontroller rated up to 48 MHz with 14 KB of program Flash, 1024 bytes of RAM, a 48 MHz internal oscillator, and a USB 2.0 interface with clock recovery. According to the Microchip Technology PIC16(L)F1454/5/9 data sheet, it also provides a 49-instruction set, a 16-level stack, 10-bit conversion capability, and 128 bytes of High Endurance Flash. The device is supplied in a 14-pin PDIP package, making it suitable for prototyping, educational platforms, compact control products, and USB-connected embedded equipment.
Where can I download the PIC16F1455 datasheet PDF?
The official PIC16F1455 data sheet is available from Microchip Technology as the PIC16(L)F1454/5/9 family document, document 40001639B. It covers the PIC16F1455 processor core, Flash program memory, SRAM, USB module, converters, clocking, electrical characteristics, and package pin definitions. Use the manufacturer PDF for design decisions because it also identifies errata and device-revision considerations. The direct manufacturer download is listed in the datasheet field on this page.
Where can I find the PIC16F1455 pinout?
The PIC16F1455 pinout is defined in the pin-description tables and package drawings of the Microchip Technology PIC16(L)F1454/5/9 data sheet. For the 14-pin PDIP, pins 1 and 14 are VDD, pin 9 is VSS, pin 2 is MCLR/VPP, and the remaining pins provide port, analog, timer, comparator, and programming functions. Use the numbered package drawing on this page when assigning PCB nets, and consult the data sheet for the exact multiplexed function on every port pin.
How do I program a PIC16F1455 microcontroller?
A PIC16F1455 is programmed through its in-circuit serial programming interface associated with the MCLR/VPP and programming-data pins. The programming system must support the PIC16F1455 family and apply the voltage and timing requirements specified by Microchip Technology. In-circuit programming is useful because firmware can be written after the PCB is assembled. The flash memory also supports self read/write operation, allowing firmware to retain local information when the application design requires it.
What can the PIC16F1455 USB interface be used for?
The integrated USB 2.0 module can connect the PIC16F1455 to a USB host for control, configuration, logging, or data transfer. Its clock-recovery function supports recovering communication timing from the USB data stream. Firmware must implement the required USB device behavior, descriptors, endpoints, and enumeration handling. Keep the USB route short, provide correct series impedance, follow connector and protection requirements, and validate signal integrity and compliance on the final board.
What is the PIC16F1455-I/P and where is it used?
The PIC16F1455-I/P is the industrial-temperature ordering configuration of the Microchip Technology PIC16F1455, offered in a 14-pin PDIP package. It combines an 8-bit CPU, 14 KB Flash, 1024 bytes of RAM, a 48 MHz internal oscillator, conversion features, and USB 2.0. Common uses include USB sensor interfaces, compact data loggers, educational electronics, test adapters, and small industrial controllers where through-hole assembly and a wide internal clock range are valuable.
What is the difference between PIC16F1454-I/P and PIC16F1455-I/P?
PIC16F1454-I/P and PIC16F1455-I/P belong to the same enhanced mid-range PIC16 family and are available in the same 14-pin PDIP footprint, but they are not identical devices. The PIC16F1455 provides the larger 14 KB Flash configuration identified for this ordering code, while the family comparison highlights distinctions in peripheral resources between the 1454 and 1455 variants. Confirm the exact pin-description table, converter resources, and interrupt mapping before using either device in a new PCB design.
Can PIC16F1455-E/P replace PIC16F1455-I/P on the same PCB?
PIC16F1455-E/P can use the same 14-pin PDIP footprint, but its temperature grade differs from PIC16F1455-I/P. The industrial-grade I/P selection is preferred when the enclosure can reach cold conditions, while the E/P commercial-grade selection is intended for a narrower operating environment. Before substitution, verify every connected peripheral function, pin voltage tolerance, timing value, and environmental requirement against the manufacturer data sheet.
When should I choose PIC16F1455-I/P over PIC16F1454-I/P?
Choose PIC16F1455-I/P when the design benefits from its 14 KB Flash and 1024-byte RAM allocation or requires the specific USB and peripheral resource set associated with the 1455. Choose PIC16F1454-I/P only after confirming that its resource set satisfies the firmware, interface, and memory requirements. Both are 8-bit, 48 MHz-capable members of the same family in 14-pin PDIP packages, so the decision should be based on verified resources rather than package appearance alone.
Is PIC16F1455-I/P suitable for a USB data logger?
The PIC16F1455-I/P is suitable for a compact USB data logger when the required storage, sampling rate, and data throughput fit within its 14 KB Flash and 1024-byte RAM. Its 48 MHz internal oscillator and USB 2.0 interface reduce external clock and host-interface requirements. For sustained logging, use the High Endurance Flash data-storage feature or external nonvolatile storage, and validate USB enumeration, sustained transfer behavior, bus-power limits, and thermal conditions in the finished enclosure.
What is the best drop-in replacement for PIC16F1455-I/P?
PIC16F1455-E/P is the closest same-footprint replacement candidate because it retains the PIC16F1455 device identity and 14-pin PDIP package while changing the temperature-grade suffix. It is appropriate only when the final product operates within the E/P environmental rating and all electrical and peripheral requirements remain unchanged. Use the Request a Quote form on this page to request the current availability and exact ordering information for either suffix.
What is the best Microchip equivalent for PIC16F1455-I/P?
PIC16F1455-E/P is the most direct Microchip alternative with the same device family and 14-pin PDIP package, while PIC16F1454-I/P and PIC16F1459-I/P are related same-family alternatives whose resource sets must be checked. No verified cross-manufacturer equivalent was established for this exact pinout and peripheral combination. Treat any cross-brand suggestion as a redesign candidate unless Microchip Technology or the original equipment manufacturer confirms pin-to-pin and firmware compatibility.
Where to buy PIC16F1455-I/P online?
Use the Request a Quote form on this page to request PIC16F1455-I/P availability, current lead time, and an order quote. The exact 14-pin PDIP suffix matters because package, temperature grade, and reel or tube configuration distinguish different orderable variants. Share the required quantity, target date, and acceptable packaging format with the supplier so the quotation corresponds to the exact MCU intended for your PCB and production process.
What is the price of PIC16F1455-I/P?
Current purchasing terms for PIC16F1455-I/P should be obtained through the Request a Quote form on this page. The price can vary with order quantity, package configuration, production volume, and component availability, so a static price would not represent a reliable quotation. Provide the target quantity and delivery schedule when requesting the quote to obtain the most relevant commercial response.
Is PIC16F1455-I/P in stock and what is its lead time?
Current stock and lead time for PIC16F1455-I/P should be confirmed through the Request a Quote form on this page. The 14-pin PDIP ordering code is a production-relevant package and temperature-grade designation that should be included in every request. Ask the supplier to state available quantity, minimum order quantity, and the delivery window for your required quantities so production planning uses current scheduling rather than an assumed schedule.

داتای سەرچاوەی ئەندازیاری بۆ PIC16F1455-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PIC16F1455-I/P for a 14-pin PDIP design that needs a 48 MHz 8-bit controller, 14 KB Flash, 1024 bytes of RAM, USB 2.0 with clock recovery, and industrial-grade ordering. Choose PIC16F1455-E/P when the PCB, pinout, and firmware requirements are unchanged and the final operating environment falls within the commercial temperature grade. Consider PIC16F1454-I/P when its verified peripheral set is sufficient but the larger PIC16F1455 resource allocation is unnecessary. PIC16F1459-I/P or PIC16F1459-E/P should be selected only after checking the additional or changed family peripherals against the application. No verified cross-manufacturer drop-in replacement was established, so an MCU from another supplier should be treated as a redesign unless its exact pinout, memory, peripherals, clocking, and firmware requirements are independently confirmed.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16F1455-E/P PIC16F1454-I/P PIC16F1459-I/P PIC16F1454-E/P PIC16F1459-E/P
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP 14-pin PDIP
CPU Architecture 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC 8-bit PIC16 RISC
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Temperature Grade Industrial Commercial Industrial Industrial Commercial Commercial
Internal Oscillator 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Instruction Set 49 instructions 49 instructions 49 instructions 49 instructions 49 instructions 49 instructions

جیاکەرەوە سەرەکییەکان

  • Retains the full target device configuration with a different temperature grade (بەراورد بەPIC16F1455-E/P)
  • Uses the industrial-grade ordering option for wider-temperature product designs (بەراورد بەPIC16F1455-E/P)
  • Provides a documented 14 KB Flash allocation for connected control firmware (بەراورد بەPIC16F1454-I/P)
  • Combines USB connectivity with internal high-speed clocking in a through-hole package (بەراورد بەPIC16F1459-I/P)

تێبینییەکانی دیزاین

Place the supply decoupling network directly beside pins 1 and 14, with pin 9 connected to the ground plane. Route the VDD-to-VSS connection to minimize loop area and keep switching-node and USB transient paths away from the MCU. If the board draws USB bus power, distinguish the protected 5 V input from the regulated rail and verify that startup transients do not brown out the controller. Confirm the final capacitor values and ESR expectations against the Microchip Technology data sheet.

Treat the USB connection as a controlled-impedance interface. Use a short, continuous route between the PIC16F1455 USB pins and the connector or protection device, maintain symmetrical geometry where practical, and provide a nearby low-inductance ground connection. Avoid placing test pads or unrelated switching circuits along the data path. Compliance testing must be performed on the finished PCB because connector details, cable length, shielding, and enclosure grounding can affect USB performance.

Do not substitute the MCU solely because the package drawings match. Compare the complete pin-description table, converter resources, interrupt mapping, timer assignments, USB functions, memory size, voltage limits, and temperature grade. The I/P suffix identifies the industrial-temperature selection, while E/P identifies the commercial-grade selection. In-circuit programming also depends on correct MCLR/VPP and programming-data connections, so preserve the programmer access required for production and field firmware updates.

Keep sensitive analog inputs away from USB data, clock-distribution traces, switching inductors, and relay or motor drive paths. Provide a quiet ground reference for converter and comparator functions, and use guard or isolation techniques when the sensor source has high impedance. The internal 48 MHz oscillator reduces clock-routing complexity, but clock configuration, watchdog behavior, and startup timing still require validation under the intended power and temperature conditions.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The standard industrial-temperature PIC16F1455-I/P is not presented as an automotive-qualified ordering option. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from current Microchip Technology product documentation or the supplier.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pic16f1455 datasheet pic16f1455 microcontroller pic16f1455 programming pic16f1455 pdf pic16f1455 usb PIC16F1455-I/P datasheet PIC16F1455-I/P pinout PIC16F1455-I/P application circuit PIC16F1455-I/P equivalent PIC16F1455-I/P replacement PIC16F1455-I/P vs PIC16F1454-I/P PIC16F1455-I/P price PIC16F1455-I/P stock Microchip PIC16F1455-I/P

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16F1455-I/P PIC16F1455 PIC16F1454-I/P PIC16F1455-E/P PIC16F1459-I/P PIC16 8-bit RISC microcontroller embedded controller flash program memory USB 2.0 clock recovery internal oscillator 48 MHz 10-bit ADC 5-bit comparator High Endurance Flash PIC16(L)F1454/5/9 14-pin PDIP DIP package family through-hole surface-mount in-circuit serial programming USB sensor interface industrial control module
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ