PIC16F1947T-I/PT - 8-Bit 32MHz 28KB Flash MCU | Microchip
MPN: PIC16F1947T-I/PT ✓ چالاکPIC16F1947T-I/PT گشتی
What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), peripherals and I/O. In the system hierarchy it sits above discrete logic and below full microprocessors, providing programmable digital control. The PIC16F1947T-I/PT belongs to Microchip's enhanced mid-range 8-bit PIC16 family, a Harvard-architecture device using separate program and data buses for deterministic instruction execution.
Key features include a 32 MHz internal oscillator, hardware multiplier, 32-level hardware stack with overflow/underflow reset, 49 instruction set, 10-bit ADC with up to 17 channels, multiple capture/compare/PWM modules, an LCD driver supporting up to 192 segments, EUSART, MSSP (SPI/I2C), and nanoWatt XLP sleep modes with currents as low as . Code protection, ICSP (In-Circuit Serial Programming) and a wide operating temperature range make it production-ready for industrial designs.
The PIC16F1947T-I/PT uses a 14-bit instruction word with single-cycle execution (200 ns at 20 MHz, 125 ns at 32 MHz). The Harvard architecture separates 16-bit instruction fetch from 8-bit data access, eliminating the von Neumann bottleneck. The integrated LCD driver with variable bias and contrast control eliminates external LCD controller ICs, reducing BOM cost in metering and appliance designs.
Typical applications include LCD-display human-machine interfaces in white goods, battery-powered metering (electric/gas/water), industrial control panels, automotive body modules, and low-cost embedded control replacing discrete logic. The wide voltage range (2.3-5.5 V) and XLP features also make it suitable for IoT sensor nodes and remote controls.
When designing with the PIC16F1947T-I/PT, ensure decoupling caps are placed within 3 mm of VDD/VSS pins and that the ICSP pins (RB6/ICSPDAT, RB7/ICSPCLK) are accessible for in-circuit programming. The LCD bias capacitors must be sized per the segment count and bias mode chosen.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1947T-I/PT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1947T-I/PT (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ADC, LCD Driver, Package, Timers, Program Memory (Flash).
PIC16F1947-I/PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16LF1947T-I/PT
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F1947T-E/PT
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F1946T-I/PT
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F1937-I/PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F19176-I/PT
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1947T-I/PT زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Architecture | PIC16 enhanced mid-range 8-bit Harvard |
| CPU Core | PIC16 (RISC) |
| Maximum Clock Speed | 32 MHz |
| Instruction Cycle Time | 125 ns at 32 MHz |
| Program Memory (Flash) | 28 KB (16K x 14) |
| Data RAM | 1 KB |
| Data EEPROM | 256 Bytes |
| Supply Voltage (VDD) | 2.3 V to 5.5 V |
| I/O Pins | 36 (max) |
| مەودای پلەی گەرمیی کارکردن | -40 C to +85 C (Industrial, -I suffix) |
| ADC | 10-bit, up to 17 channels |
| Timers | 8-bit x2, 16-bit x1, WDT |
| PWM Modules | ECCP, 4 CCP |
| Communication Interfaces | EUSART, MSSP (SPI / I2C) |
| LCD Driver | Yes, up to 192 segments |
| Low-Power Technology | nanoWatt XLP |
| Hardware Stack | 32 levels with overflow/underflow reset |
| پاکێج | 64-pin TQFP (PT), 10x10 mm |
| جۆری دامەزراندن | Surface Mount |
| RoHS Compliance | Compliant (Pb-free) |
| ئاستی MSL | 3 (168 hours) |
| Programming Interface | ICSP (RB6/RB7), 2-wire |
ڕێکخستنی پینی PIC16F1947T-I/PT
| پین 1 | SEG29/RE0 — LCD segment 29 / PORTE bit 0 |
| پین 2 | SEG30/RE1 — LCD segment 30 / PORTE bit 1 |
| پین 3 | SEG31/RE2 — LCD segment 31 / PORTE bit 2 |
| پین 4 | SEG32/RE3 — LCD segment 32 / PORTE bit 3 |
| پین 5 | VDD — Positive power supply (2.3-5.5 V) |
| پین 6 | VSS — Ground reference |
| پین 7 | OSC1/CLKIN/RA7 — Crystal oscillator input / PORTA bit 7 |
| پین 8 | OSC2/CLKOUT/RA6 — Crystal oscillator output / PORTA bit 6 |
| پین 9 | SEG0/RA0 — LCD segment 0 / PORTA bit 0 |
| پین 10 | SEG1/RA1 — LCD segment 1 / PORTA bit 1 |
| پین 11 | SEG2/RA2 — LCD segment 2 / PORTA bit 2 |
| پین 12 | SEG3/RA3 — LCD segment 3 / PORTA bit 3 |
| پین 13 | SEG4/RA4 — LCD segment 4 / PORTA bit 4 |
| پین 14 | SEG5/RA5 — LCD segment 5 / PORTA bit 5 |
| پین 15 | VSS — Ground reference |
| پین 16 | VDD — Positive power supply (2.3-5.5 V) |
| پین 17 | SEG6/RB0 — LCD segment 6 / PORTB bit 0 |
| پین 18 | SEG7/RB1 — LCD segment 7 / PORTB bit 1 |
| پین 19 | SEG8/RB2 — LCD segment 8 / PORTB bit 2 |
| پین 20 | SEG9/RB3 — LCD segment 9 / PORTB bit 3 |
| پین 21 | SEG10/RB4 — LCD segment 10 / PORTB bit 4 |
| پین 22 | SEG11/RB5 — LCD segment 11 / PORTB bit 5 |
| پین 23 | ICSPCLK/RB6 — ICSP clock / PORTB bit 6 |
| پین 24 | ICSPDAT/RB7 — ICSP data / PORTB bit 7 |
| پین 25 | SEG12/RC0 — LCD segment 12 / PORTC bit 0 |
| پین 26 | SEG13/RC1 — LCD segment 13 / PORTC bit 1 |
| پین 27 | SEG14/RC2 — LCD segment 14 / PORTC bit 2 |
| پین 28 | SEG15/RC3 — LCD segment 15 / PORTC bit 3 |
| پین 29 | SEG16/RC4 — LCD segment 16 / PORTC bit 4 |
| پین 30 | SEG17/RC5 — LCD segment 17 / PORTC bit 5 |
| پین 31 | SEG18/RC6 — LCD segment 18 / PORTC bit 6 |
| پین 32 | SEG19/RC7 — LCD segment 19 / PORTC bit 7 |
| پین 33 | VSS — Ground reference |
| پین 34 | VDD — Positive power supply (2.3-5.5 V) |
| پین 35 | SEG20/RD0 — LCD segment 20 / PORTD bit 0 |
| پین 36 | SEG21/RD1 — LCD segment 21 / PORTD bit 1 |
| پین 37 | SEG22/RD2 — LCD segment 22 / PORTD bit 2 |
| پین 38 | SEG23/RD3 — LCD segment 23 / PORTD bit 3 |
| پین 39 | SEG24/RD4 — LCD segment 24 / PORTD bit 4 |
| پین 40 | SEG25/RD5 — LCD segment 25 / PORTD bit 5 |
| پین 41 | SEG26/RD6 — LCD segment 26 / PORTD bit 6 |
| پین 42 | SEG27/RD7 — LCD segment 27 / PORTD bit 7 |
| پین 43 | VSS — Ground reference |
| پین 44 | VDD — Positive power supply (2.3-5.5 V) |
| پین 45 | COM0/RF0 — LCD common 0 / PORTF bit 0 |
| پین 46 | COM1/RF1 — LCD common 1 / PORTF bit 1 |
| پین 47 | COM2/RF2 — LCD common 2 / PORTF bit 2 |
| پین 48 | COM3/RF3 — LCD common 3 / PORTF bit 3 |
| پین 49 | COM4/RF4 — LCD common 4 / PORTF bit 4 |
| پین 50 | COM5/RF5 — LCD common 5 / PORTF bit 5 |
| پین 51 | COM6/RF6 — LCD common 6 / PORTF bit 6 |
| پین 52 | COM7/RF7 — LCD common 7 / PORTF bit 7 |
| پین 53 | VSS — Ground reference |
| پین 54 | VDD — Positive power supply (2.3-5.5 V) |
| پین 55 | SEG28/RG0 — LCD segment 28 / PORTG bit 0 |
| پین 56 | SEG33/RG1 — LCD segment 33 / PORTG bit 1 |
| پین 57 | SEG34/RG2 — LCD segment 34 / PORTG bit 2 |
| پین 58 | SEG35/RG3 — LCD segment 35 / PORTG bit 3 |
| پین 59 | SEG36/RG4 — LCD segment 36 / PORTG bit 4 |
| پین 60 | MCLR/RG5 — Master Clear reset / PORTG bit 5 |
| پین 61 | AVDD — Analog positive supply (tie to VDD) |
| پین 62 | AVSS — Analog ground (tie to VSS) |
| پین 63 | VLCD — LCD charge pump output / external bias |
| پین 64 | NC — Not connected (per datasheet, lead-frame support) |
بەکارهێنانە باوەکان
PIC16F1947T-I/PT گونجاوە بۆ 6 بەکارھێنانs: LCD Human-Machine Interface (HMI) Panels, Battery-Powered Utility Meters, Industrial Control Panels, White Goods and Appliance Controllers, Automotive Body Control Modules, Low-Cost IoT Sensor Nodes.
LCD Human-Machine Interface (HMI) Panels
The PIC16F1947T-I/PT is purpose-built for LCD HMI panels thanks to its integrated LCD driver supporting up to 192 segments across COM/SEG pins. Designers can drive dot-matrix or 7-segment LCDs without external bias resistors or controllers, reducing BOM count by 2-3 ICs. Its 28 KB Flash accommodates multi-language menus and button debouncing logic, while nanoWatt XLP sleep modes (under 100 nA typical) allow battery-backed HMI panels that retain state for years. According to the Microchip datasheet, the integrated charge pump supports 1.8-3.5 V LCD bias generation even when VDD drops below the panel threshold.
پێشنیارکراو
Battery-Powered Utility Meters
In gas, water, and electric meters, the PIC16F1947T-I/PT provides the LCD driver, ADC for sensor readout, and nanoWatt XLP sleep modes needed for 10+ year battery life. Its 32 MHz core handles pulse counting, calibration math, and TOU (time-of-use) metering algorithms, while the 1 KB RAM buffers interval data before EEPROM commit. The 2.3-5.5 V supply range supports single 3 V lithium or two AA cells, with the LCD charge pump maintaining display contrast even at end-of-life battery voltage. A typical implementation draws under 2 uA average with periodic wake-up.
پێشنیارکراو
Industrial Control Panels
The PIC16F1947T-I/PT's 17-channel 10-bit ADC reads multiple analog sensors (temperature, pressure, flow) while its CCP/ECCP modules generate PWM for valve and motor control. The EUSART provides RS-485 connectivity for Modbus RTU networks, and MSSP supports I2C sensor expansion or SPI peripheral interfacing. With 36 GPIO, a single MCU replaces 2-3 logic ICs in PLC expansion I/O modules. Industrial -40 C to +85 C operation and a robust 32-level hardware stack make it suitable for factory-floor equipment.
پێشنیارکراو
White Goods and Appliance Controllers
Washing machines, dishwashers, and microwave ovens use the PIC16F1947T-I/PT for motor control, sensor readout, and user interface LCD. The CCP/ECCP modules drive triac phase-angle control for AC loads, while the 10-bit ADC monitors temperature sensors (NTC) and water level. The integrated LCD driver eliminates the cost of separate display controllers in user-interface panels. nanoWatt XLP standby current extends energy-star compliance ratings during low-power idle states.
پێشنیارکراو
Automotive Body Control Modules
While not AEC-Q100 qualified, the PIC16F1947T-I/PT (industrial -I grade) is widely used in non-safety automotive body applications like HVAC control heads, mirror adjusters, and lighting dimmers. Its LIN-compatible EUSART enables single-wire bus communication, and the integrated LCD driver displays cabin temperature and fan settings. For AEC-Q100 qualified designs, the PIC16F1947T-E/PT (extended temperature -40 C to +125 C variant) is the recommended drop-in replacement with the same TQFP-64 pinout.
پێشنیارکراو
Low-Cost IoT Sensor Nodes
The PIC16F1947T-I/PT serves as a low-cost local controller in IoT edge nodes where full Linux/MCU modules are overkill. It handles sensor sampling, local decision logic, and drives a small status LCD. Combined with an external radio like the RN4870 (Bluetooth) or MRF24J40 (Zigbee), it creates a complete IoT endpoint. The 28 KB Flash fits basic MQTT-SN or proprietary stack implementations, while nanoWatt XLP modes enable multi-year battery operation on coin cells. Its 64-pin TQFP package provides ample GPIO for sensor fan-out.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F1947T-I/PT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F1947-I/PT | PIC16LF1947T-I/PT | PIC16F1947T-E/PT | PIC16F1946T-I/PT | PIC16F1937-I/PT | PIC16F19176-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same |
| Program Flash | 28 KB | 28 KB | 28 KB | 28 KB | 14 KB | 14 KB | 28 KB |
| Data RAM | 1 KB | 1 KB | 1 KB | 1 KB | 512 B | 512 B | 2 KB |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Supply Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| LCD Driver | 192 segments | 192 segments | 192 segments | 192 segments | 192 segments | 192 segments | 184 segments |
جیاکەرەوە سەرەکییەکان
- Largest Flash/RAM in the 64-pin TQFP PIC16F193x/194x family (بەراورد بەPIC16F1946T-I/PT)
- Wide 2.3-5.5 V VDD range supports both 3.3 V and 5 V designs (بەراورد بەPIC16LF1947T-I/PT)
- Same die/package as automotive-grade E variant (بەراورد بەPIC16F1947T-E/PT)
تێبینییەکانی دیزاین
Place a 100 nF decoupling capacitor within 3 mm of each VDD/VSS pin pair (the 64-pin TQFP has 5 pairs at pins 5/6, 15/16, 33/34, 43/44, 53/54). Add a bulk 10 uF tantalum or ceramic capacitor at the board-level supply input. The nanoWatt XLP sleep current of approximately 50-100 nA requires careful PCB layout - avoid leakage paths through the LCD bias network. Use battery isolation MOSFETs for designs that must achieve <500 nA total quiescent current.
Keep the LCD segment and common traces short and parallel to minimize ghosting artifacts. Route COM0-COM7 on one side and SEG0-SEG36 on the perpendicular side with 0.2-0.3 mm trace spacing. Add guard traces tied to VSS between adjacent segments if the LCD glass requires it. The VLCD pin (63) needs a 1 uF capacitor to VSS for charge pump stability - do not omit this capacitor or LCD contrast will drift.
Do not leave MCLR/RG5 (pin 60) floating - tie to VDD through a 10 kohm resistor for normal operation or to the ICSP programmer header. Configuration word settings (especially WDTE, BOREN, LVP) must be set before code protection is enabled, otherwise the device will be bricked. When migrating from the PIC16F1937 or PIC16F1946, verify that your linker script accounts for the larger 28 KB Flash and 1 KB RAM available on this part.
زانیاری پابەندبوون
RoHS and REACH compliant per Microchip product page. Industrial -I grade is not AEC-Q100 qualified; choose PIC16F1947T-E/PT for automotive applications requiring extended temperature range.