PIC16F1947T-I/PT - 8-Bit 32MHz 28KB Flash MCU | Microchip
Référence : PIC16F1947T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.92 | $4,92 |
| 10 | $4.43 | $44,30 |
| 100 | $3.94 | $394,00 |
| 500 | $3.55 | $1 775,00 |
| 1 000 | $3.16 | $3 160,00 |
PIC16F1947T-I/PT Présentation
What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), peripherals and I/O. In the system hierarchy it sits above discrete logic and below full microprocessors, providing programmable digital control. The PIC16F1947T-I/PT belongs to Microchip's enhanced mid-range 8-bit PIC16 family, a Harvard-architecture device using separate program and data buses for deterministic instruction execution.
Key features include a 32 MHz internal oscillator, hardware multiplier, 32-level hardware stack with overflow/underflow reset, 49 instruction set, 10-bit ADC with up to 17 channels, multiple capture/compare/PWM modules, an LCD driver supporting up to 192 segments, EUSART, MSSP (SPI/I2C), and nanoWatt XLP sleep modes with currents as low as . Code protection, ICSP (In-Circuit Serial Programming) and a wide operating temperature range make it production-ready for industrial designs.
The PIC16F1947T-I/PT uses a 14-bit instruction word with single-cycle execution (200 ns at 20 MHz, 125 ns at 32 MHz). The Harvard architecture separates 16-bit instruction fetch from 8-bit data access, eliminating the von Neumann bottleneck. The integrated LCD driver with variable bias and contrast control eliminates external LCD controller ICs, reducing BOM cost in metering and appliance designs.
Typical applications include LCD-display human-machine interfaces in white goods, battery-powered metering (electric/gas/water), industrial control panels, automotive body modules, and low-cost embedded control replacing discrete logic. The wide voltage range (2.3-5.5 V) and XLP features also make it suitable for IoT sensor nodes and remote controls.
When designing with the PIC16F1947T-I/PT, ensure decoupling caps are placed within 3 mm of VDD/VSS pins and that the ICSP pins (RB6/ICSPDAT, RB7/ICSPCLK) are accessible for in-circuit programming. The LCD bias capacitors must be sized per the segment count and bias mode chosen.
Alternatives de remplacement direct pour PIC16F1947T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16F1947T-I/PT (même facteur de forme et même empreinte) — différant par ADC, LCD Driver, Package, Timers, Program Memory (Flash).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16F1947-I/PT
✅ Remplacement direct✓ En stock
$2.35 / unité
Voir la fiche technique →PIC16LF1947T-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16F1947T-E/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16F1946T-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16F1937-I/PT
✅ Remplacement direct✓ En stock
$3.1 / unité
Voir la fiche technique →PIC16F19176-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.85 / unité
Voir la fiche technique →PIC16F1947T-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC16 enhanced mid-range 8-bit Harvard |
| CPU Core | PIC16 (RISC) |
| Maximum Clock Speed | 32 MHz |
| Instruction Cycle Time | 125 ns at 32 MHz |
| Program Memory (Flash) | 28 KB (16K x 14) |
| Data RAM | 1 KB |
| Data EEPROM | 256 Bytes |
| Supply Voltage (VDD) | 2.3 V to 5.5 V |
| I/O Pins | 36 (max) |
| Plage de température de fonctionnement | -40 C to +85 C (Industrial, -I suffix) |
| ADC | 10-bit, up to 17 channels |
| Timers | 8-bit x2, 16-bit x1, WDT |
| PWM Modules | ECCP, 4 CCP |
| Communication Interfaces | EUSART, MSSP (SPI / I2C) |
| LCD Driver | Yes, up to 192 segments |
| Low-Power Technology | nanoWatt XLP |
| Hardware Stack | 32 levels with overflow/underflow reset |
| Boîtier | 64-pin TQFP (PT), 10x10 mm |
| Type de montage | Surface Mount |
| RoHS Compliance | Compliant (Pb-free) |
| Niveau MSL | 3 (168 hours) |
| Programming Interface | ICSP (RB6/RB7), 2-wire |
Configuration des broches de PIC16F1947T-I/PT
| Broche 1 | SEG29/RE0 — LCD segment 29 / PORTE bit 0 |
| Broche 2 | SEG30/RE1 — LCD segment 30 / PORTE bit 1 |
| Broche 3 | SEG31/RE2 — LCD segment 31 / PORTE bit 2 |
| Broche 4 | SEG32/RE3 — LCD segment 32 / PORTE bit 3 |
| Broche 5 | VDD — Positive power supply (2.3-5.5 V) |
| Broche 6 | VSS — Ground reference |
| Broche 7 | OSC1/CLKIN/RA7 — Crystal oscillator input / PORTA bit 7 |
| Broche 8 | OSC2/CLKOUT/RA6 — Crystal oscillator output / PORTA bit 6 |
| Broche 9 | SEG0/RA0 — LCD segment 0 / PORTA bit 0 |
| Broche 10 | SEG1/RA1 — LCD segment 1 / PORTA bit 1 |
| Broche 11 | SEG2/RA2 — LCD segment 2 / PORTA bit 2 |
| Broche 12 | SEG3/RA3 — LCD segment 3 / PORTA bit 3 |
| Broche 13 | SEG4/RA4 — LCD segment 4 / PORTA bit 4 |
| Broche 14 | SEG5/RA5 — LCD segment 5 / PORTA bit 5 |
| Broche 15 | VSS — Ground reference |
| Broche 16 | VDD — Positive power supply (2.3-5.5 V) |
| Broche 17 | SEG6/RB0 — LCD segment 6 / PORTB bit 0 |
| Broche 18 | SEG7/RB1 — LCD segment 7 / PORTB bit 1 |
| Broche 19 | SEG8/RB2 — LCD segment 8 / PORTB bit 2 |
| Broche 20 | SEG9/RB3 — LCD segment 9 / PORTB bit 3 |
| Broche 21 | SEG10/RB4 — LCD segment 10 / PORTB bit 4 |
| Broche 22 | SEG11/RB5 — LCD segment 11 / PORTB bit 5 |
| Broche 23 | ICSPCLK/RB6 — ICSP clock / PORTB bit 6 |
| Broche 24 | ICSPDAT/RB7 — ICSP data / PORTB bit 7 |
| Broche 25 | SEG12/RC0 — LCD segment 12 / PORTC bit 0 |
| Broche 26 | SEG13/RC1 — LCD segment 13 / PORTC bit 1 |
| Broche 27 | SEG14/RC2 — LCD segment 14 / PORTC bit 2 |
| Broche 28 | SEG15/RC3 — LCD segment 15 / PORTC bit 3 |
| Broche 29 | SEG16/RC4 — LCD segment 16 / PORTC bit 4 |
| Broche 30 | SEG17/RC5 — LCD segment 17 / PORTC bit 5 |
| Broche 31 | SEG18/RC6 — LCD segment 18 / PORTC bit 6 |
| Broche 32 | SEG19/RC7 — LCD segment 19 / PORTC bit 7 |
| Broche 33 | VSS — Ground reference |
| Broche 34 | VDD — Positive power supply (2.3-5.5 V) |
| Broche 35 | SEG20/RD0 — LCD segment 20 / PORTD bit 0 |
| Broche 36 | SEG21/RD1 — LCD segment 21 / PORTD bit 1 |
| Broche 37 | SEG22/RD2 — LCD segment 22 / PORTD bit 2 |
| Broche 38 | SEG23/RD3 — LCD segment 23 / PORTD bit 3 |
| Broche 39 | SEG24/RD4 — LCD segment 24 / PORTD bit 4 |
| Broche 40 | SEG25/RD5 — LCD segment 25 / PORTD bit 5 |
| Broche 41 | SEG26/RD6 — LCD segment 26 / PORTD bit 6 |
| Broche 42 | SEG27/RD7 — LCD segment 27 / PORTD bit 7 |
| Broche 43 | VSS — Ground reference |
| Broche 44 | VDD — Positive power supply (2.3-5.5 V) |
| Broche 45 | COM0/RF0 — LCD common 0 / PORTF bit 0 |
| Broche 46 | COM1/RF1 — LCD common 1 / PORTF bit 1 |
| Broche 47 | COM2/RF2 — LCD common 2 / PORTF bit 2 |
| Broche 48 | COM3/RF3 — LCD common 3 / PORTF bit 3 |
| Broche 49 | COM4/RF4 — LCD common 4 / PORTF bit 4 |
| Broche 50 | COM5/RF5 — LCD common 5 / PORTF bit 5 |
| Broche 51 | COM6/RF6 — LCD common 6 / PORTF bit 6 |
| Broche 52 | COM7/RF7 — LCD common 7 / PORTF bit 7 |
| Broche 53 | VSS — Ground reference |
| Broche 54 | VDD — Positive power supply (2.3-5.5 V) |
| Broche 55 | SEG28/RG0 — LCD segment 28 / PORTG bit 0 |
| Broche 56 | SEG33/RG1 — LCD segment 33 / PORTG bit 1 |
| Broche 57 | SEG34/RG2 — LCD segment 34 / PORTG bit 2 |
| Broche 58 | SEG35/RG3 — LCD segment 35 / PORTG bit 3 |
| Broche 59 | SEG36/RG4 — LCD segment 36 / PORTG bit 4 |
| Broche 60 | MCLR/RG5 — Master Clear reset / PORTG bit 5 |
| Broche 61 | AVDD — Analog positive supply (tie to VDD) |
| Broche 62 | AVSS — Analog ground (tie to VSS) |
| Broche 63 | VLCD — LCD charge pump output / external bias |
| Broche 64 | NC — Not connected (per datasheet, lead-frame support) |
Applications typiques
PIC16F1947T-I/PT convient pour 6 applications: LCD Human-Machine Interface (HMI) Panels, Battery-Powered Utility Meters, Industrial Control Panels, White Goods and Appliance Controllers, Automotive Body Control Modules, Low-Cost IoT Sensor Nodes.
LCD Human-Machine Interface (HMI) Panels
The PIC16F1947T-I/PT is purpose-built for LCD HMI panels thanks to its integrated LCD driver supporting up to 192 segments across COM/SEG pins. Designers can drive dot-matrix or 7-segment LCDs without external bias resistors or controllers, reducing BOM count by 2-3 ICs. Its 28 KB Flash accommodates multi-language menus and button debouncing logic, while nanoWatt XLP sleep modes (under 100 nA typical) allow battery-backed HMI panels that retain state for years. According to the Microchip datasheet, the integrated charge pump supports 1.8-3.5 V LCD bias generation even when VDD drops below the panel threshold.
Recommandé
Battery-Powered Utility Meters
In gas, water, and electric meters, the PIC16F1947T-I/PT provides the LCD driver, ADC for sensor readout, and nanoWatt XLP sleep modes needed for 10+ year battery life. Its 32 MHz core handles pulse counting, calibration math, and TOU (time-of-use) metering algorithms, while the 1 KB RAM buffers interval data before EEPROM commit. The 2.3-5.5 V supply range supports single 3 V lithium or two AA cells, with the LCD charge pump maintaining display contrast even at end-of-life battery voltage. A typical implementation draws under 2 uA average with periodic wake-up.
Recommandé
Industrial Control Panels
The PIC16F1947T-I/PT's 17-channel 10-bit ADC reads multiple analog sensors (temperature, pressure, flow) while its CCP/ECCP modules generate PWM for valve and motor control. The EUSART provides RS-485 connectivity for Modbus RTU networks, and MSSP supports I2C sensor expansion or SPI peripheral interfacing. With 36 GPIO, a single MCU replaces 2-3 logic ICs in PLC expansion I/O modules. Industrial -40 C to +85 C operation and a robust 32-level hardware stack make it suitable for factory-floor equipment.
Recommandé
White Goods and Appliance Controllers
Washing machines, dishwashers, and microwave ovens use the PIC16F1947T-I/PT for motor control, sensor readout, and user interface LCD. The CCP/ECCP modules drive triac phase-angle control for AC loads, while the 10-bit ADC monitors temperature sensors (NTC) and water level. The integrated LCD driver eliminates the cost of separate display controllers in user-interface panels. nanoWatt XLP standby current extends energy-star compliance ratings during low-power idle states.
Recommandé
Automotive Body Control Modules
While not AEC-Q100 qualified, the PIC16F1947T-I/PT (industrial -I grade) is widely used in non-safety automotive body applications like HVAC control heads, mirror adjusters, and lighting dimmers. Its LIN-compatible EUSART enables single-wire bus communication, and the integrated LCD driver displays cabin temperature and fan settings. For AEC-Q100 qualified designs, the PIC16F1947T-E/PT (extended temperature -40 C to +125 C variant) is the recommended drop-in replacement with the same TQFP-64 pinout.
Recommandé
Low-Cost IoT Sensor Nodes
The PIC16F1947T-I/PT serves as a low-cost local controller in IoT edge nodes where full Linux/MCU modules are overkill. It handles sensor sampling, local decision logic, and drives a small status LCD. Combined with an external radio like the RN4870 (Bluetooth) or MRF24J40 (Zigbee), it creates a complete IoT endpoint. The 28 KB Flash fits basic MQTT-SN or proprietary stack implementations, while nanoWatt XLP modes enable multi-year battery operation on coin cells. Its 64-pin TQFP package provides ample GPIO for sensor fan-out.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16F1947T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F1947-I/PT | PIC16LF1947T-I/PT | PIC16F1947T-E/PT | PIC16F1946T-I/PT | PIC16F1937-I/PT | PIC16F19176-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same |
| Program Flash | 28 KB | 28 KB | 28 KB | 28 KB | 14 KB | 14 KB | 28 KB |
| Data RAM | 1 KB | 1 KB | 1 KB | 1 KB | 512 B | 512 B | 2 KB |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Supply Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| LCD Driver | 192 segments | 192 segments | 192 segments | 192 segments | 192 segments | 192 segments | 184 segments |
Principaux différenciateurs
- Largest Flash/RAM in the 64-pin TQFP PIC16F193x/194x family (vs PIC16F1946T-I/PT)
- Wide 2.3-5.5 V VDD range supports both 3.3 V and 5 V designs (vs PIC16LF1947T-I/PT)
- Same die/package as automotive-grade E variant (vs PIC16F1947T-E/PT)
Notes de conception
Place a 100 nF decoupling capacitor within 3 mm of each VDD/VSS pin pair (the 64-pin TQFP has 5 pairs at pins 5/6, 15/16, 33/34, 43/44, 53/54). Add a bulk 10 uF tantalum or ceramic capacitor at the board-level supply input. The nanoWatt XLP sleep current of approximately 50-100 nA requires careful PCB layout - avoid leakage paths through the LCD bias network. Use battery isolation MOSFETs for designs that must achieve <500 nA total quiescent current.
Keep the LCD segment and common traces short and parallel to minimize ghosting artifacts. Route COM0-COM7 on one side and SEG0-SEG36 on the perpendicular side with 0.2-0.3 mm trace spacing. Add guard traces tied to VSS between adjacent segments if the LCD glass requires it. The VLCD pin (63) needs a 1 uF capacitor to VSS for charge pump stability - do not omit this capacitor or LCD contrast will drift.
Do not leave MCLR/RG5 (pin 60) floating - tie to VDD through a 10 kohm resistor for normal operation or to the ICSP programmer header. Configuration word settings (especially WDTE, BOREN, LVP) must be set before code protection is enabled, otherwise the device will be bricked. When migrating from the PIC16F1937 or PIC16F1946, verify that your linker script accounts for the larger 28 KB Flash and 1 KB RAM available on this part.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Industrial -I grade is not AEC-Q100 qualified; choose PIC16F1947T-E/PT for automotive applications requiring extended temperature range.
