PIC16F631-E/ML - 8-Bit 20MHz Microcontroller | Microchip
MPN: PIC16F631-E/ML ✓ چالاکPIC16F631-E/ML گشتی
A PIC16F microcontroller is a compact embedded-processing device that combines a CPU core, program memory, data memory, I/O ports, timers, and communication peripherals on one integrated circuit. In the embedded-control hierarchy, the PIC16F631 belongs to the 8-bit microcontroller class and provides a direct implementation platform for small control loops, digital interfaces, and compact products with limited program-memory requirements.
The device provides 1.75 KB of flash memory, organized as 1K by 14 bits, together with 64 bytes of RAM and 18 I/O pins. Its operating voltage spans 2 V to 5.5 V, while its extended-temperature listing covers -40°C to +125°C. These characteristics make it useful when a board must operate across voltage variations, temperature extremes, and multiple embedded-control functions without requiring a larger microcontroller package.
The PIC16F631 architecture uses the Microchip mid-range 14-bit instruction set with on-board EEPROM data memory and integrated peripherals. Program memory supports repeated in-circuit programming, while the compact QFN land pattern helps reduce board area in space-constrained assemblies. Because the exposed-pad construction also provides a thermal path, PCB design must include a properly connected thermal land and adequate copper rather than treating the package as a leadless no-heat-sink device.
Typical uses include industrial control modules, compact sensor interfaces, building-automation controllers, appliance control boards, low-cost instrumentation, and compact motor or actuator control systems. The 18 available I/O pins provide useful connectivity for sensors, switches, indicators, and peripheral control, while the 2 V minimum operating voltage supports integration with low-energy power architectures.
Designers should verify every pin assignment in the manufacturer pin-description table, place decoupling capacitors close to VDD and VSS, and preserve continuity between the exposed thermal pad and the ground plane. Firmware must also account for the 1.75 KB program-memory limit by keeping boot logic, application code, and required library functions within the device's code space.
This page organizes the PIC16F631-E/ML specifications, sourcing information, family-level drop-in candidates, and practical PCB guidance into a design-focused reference. It also highlights where the MCU's small memory footprint, 18 I/O pins, and compact QFN package make it preferable to larger controllers.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F631-E/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F631-E/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Data EEPROM, I/O Pins, Instruction Set, Program Memory.
PIC16F631-I/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F685-I/ML
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F687-I/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F677-I/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F689-I/ML
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F690-I/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F631-E/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 8-bit flash microcontroller |
| Series | PIC16F |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 1.75 KB (1K x 14 bits) |
| Data RAM | 64 bytes |
| I/O Pin Count | 18 pins |
| Operating Voltage Range | 2 V to 5.5 V |
| مەودای پلەی گەرمیی کارکردن | -40°C to +125°C |
| Program Memory Type | Flash |
| Data Memory | On-chip EEPROM |
| Instruction Set | Mid-range 14-bit |
| پاکێج | 20-pin QFN with exposed pad |
| جۆری دامەزراندن | Surface mount |
| Shipping Package | Tube |
| Programmable I/O | Digital I/O |
ڕێکخستنی پینی PIC16F631-E/ML
| پین 1 | RA0/OSC-E — RA0 input/output or external oscillator input |
| پین 2 | RA1/OSC-E — RA1 input/output or external oscillator output |
| پین 3 | RA2/INT0/C1OUT — RA2 input/output, external interrupt input, or comparator output |
| پین 4 | RA3/INT1 — RA3 input/output or external interrupt input |
| پین 5 | RC0 — RC0 input/output |
| پین 6 | RC1 — RC1 input/output |
| پین 7 | RC2 — RC2 input/output |
| پین 8 | RC3 — RC3 input/output |
| پین 9 | RC4 — RC4 input/output |
| پین 10 | RC5 — RC5 input/output |
| پین 11 | VSS — Ground reference |
| پین 12 | VDD — Positive supply input |
| پین 13 | RA4/T0CKI — RA4 input/output or Timer0 clock input |
| پین 14 | RA5 — RA5 input/output |
| پین 15 | RC6 — RC6 input/output |
| پین 16 | RC7 — RC7 input/output |
| پین 17 | RB0/INT — RB0 input/output or interrupt input |
| پین 18 | RB1 — RB1 input/output |
| پین 19 | RB2 — RB2 input/output |
| پین 20 | RB3 — RB3 input/output |
بەکارهێنانە باوەکان
PIC16F631-E/ML گونجاوە بۆ 6 بەکارھێنانs: Compact Industrial Sensor Interface, Building Automation Controller, Appliance Control Module, Low-Voltage Measurement Hub, Compact Motor and Actuator Control, Instrumentation and Data Logger.
Compact Industrial Sensor Interface
The PIC16F631-E/ML suits compact sensor-interface boards that need local acquisition, control, and status reporting at low voltage. Its 18 I/O pins can support digital sensors, switches, alarm outputs, and indicator drivers without requiring a larger package, while the 2 V to 5.5 V operating range accommodates common low-energy rail choices. The 20 MHz CPU provides useful margin for interrupt-driven sampling and simple protocol handling. Because the controller has only 1.75 KB of flash and 64 bytes of RAM, firmware should use efficient buffering and avoid oversized libraries. A system requiring larger buffers, more flash, or advanced communications should evaluate PIC16F685-I/ML or PIC16F690-I/ML instead.
پێشنیارکراو
Building Automation Controller
PIC16F631-E/ML can serve as the local controller for a compact building-automation module that monitors switches, drives relay indicators, and coordinates an actuator or environmental sensor. Its -40°C to +125°C listing supports equipment exposed to wide internal temperature variation, while the low 2 V minimum operating voltage provides flexibility in low-power supply designs. The 18 available I/O pins permit direct connection to multiple digital inputs and outputs, reducing the need for expansion logic. Firmware should include debouncing, fault-state handling, and communication retries because the device's limited memory makes robust code structure important. For protocols with larger buffers or denser data handling, PIC16F690-I/ML provides more memory within the same 20-pin QFN family.
پێشنیارکراو
Appliance Control Module
The PIC16F631-E/ML is appropriate for appliance subassemblies requiring deterministic local control of motors, heaters, indicators, and user inputs. Its 18 I/O pins are useful for switch matrices, status LEDs, and discrete control outputs, while 20 MHz operation supports responsive timing and state-machine control. The 2 V to 5.5 V supply range supports integration into appliance power systems when suitable regulation is present. The principal design constraint is the 1.75 KB flash limit, which makes code organization essential for safety monitoring and multiple operating modes. Designers should verify that the thermal profile of the QFN assembly remains suitable under sustained actuator load, especially where the exposed pad must dissipate heat into the PCB copper area.
پێشنیارکراو
Low-Voltage Measurement Hub
PIC16F631-E/ML can coordinate a small measurement hub that combines several digital inputs with local status signaling and a serial data interface. The 2 V to 5.5 V operating range allows direct use of low-power sensor rails, while 18 I/O pins leave sufficient connectivity for sensors, triggers, and local indicators. Its 20 MHz CPU supports measurement sequencing and compact digital filtering, but the 64-byte RAM imposes strict limits on simultaneous samples and protocol buffers. Use interrupt-driven acquisition and move bulk processing to a higher-level controller when necessary. The PIC16F690-I/ML is a practical family choice if increased flash and RAM remove buffer constraints while preserving the 20-pin QFN footprint.
پێشنیارکراو
Compact Motor and Actuator Control
PIC16F631-E/ML can act as the command controller above a motor driver or actuator interface, coordinating direction, limit inputs, and fault reporting. The controller's 18 I/O pins are sufficient for discrete command and status signals, and its 20 MHz execution rate allows responsive supervisory control around a dedicated power stage. The MCU should not drive high-current loads directly; instead, use appropriately rated driver circuitry and protect control paths against inductive transients. The -40°C to +125°C listing is useful in mechanically hot environments, but thermal verification remains essential near power converters. PIC16F690-I/ML is preferable when the application requires additional protocol handling or state history beyond the PIC16F631 memory limits.
پێشنیارکراو
Instrumentation and Data Logger
PIC16F631-E/ML can support a compact instrumentation front end that records digital events, controls a display or indicator, and forwards status through a serial or network interface. Its 18 I/O pins simplify connection of switches, trigger inputs, and alarm outputs, while the broad 2 V to 5.5 V range supports mixed low-voltage circuitry. The 1.75 KB flash and 64-byte RAM are adequate for short acquisition buffers and lightweight protocols but may be restrictive for long-term logging. In such designs, use a separate nonvolatile storage device or select a PIC16F690-I/ML with more memory. Validate oscillator start-up and timing margin across temperature because accurate instrumentation depends on stable timing from startup through operation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F631-E/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F631-I/ML | PIC16F685-I/ML | PIC16F687-I/ML | PIC16F677-I/ML | PIC16F690-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin QFN with exposed pad | 20-pin QFN with exposed pad | 20-pin QFN with exposed pad | 20-pin QFN with exposed pad | 20-pin QFN with exposed pad | 20-pin QFN with exposed pad |
| CPU Architecture | 8-bit PIC16 mid-range | 8-bit PIC16 mid-range | 8-bit PIC16 mid-range | 8-bit PIC16 mid-range | 8-bit PIC16 mid-range | 8-bit PIC16 mid-range |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 1.75 KB | 1.75 KB | Approximately 2 KB | Approximately 2 KB | Approximately 3.5 KB | Approximately 3.5 KB |
| I/O Pin Count | 18 pins | 18 pins | 18 pins | 18 pins | 18 pins | 18 pins |
| Operating Voltage Range | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V | 2 V to 5.5 V |
| Temperature Grade Suffix | E | I | I | I | I | I |
جیاکەرەوە سەرەکییەکان
- Lowest-memory option within the qualified 20-pin QFN comparison set (بەراورد بەPIC16F685-I/ML)
- Exact same-package PIC16F631 option with a different commercial temperature suffix (بەراورد بەPIC16F631-I/ML)
- More flash capacity available without changing to a larger package (بەراورد بەPIC16F690-I/ML)
- 18 I/O pins support compact multi-signal control boards (بەراورد بەPIC16F677-I/ML)
تێبینییەکانی دیزاین
Follow the manufacturer QFN land pattern and exposed-pad recommendation exactly. Place the MCU's VDD bypass capacitor adjacent to the supply pin, connect VSS to a low-impedance ground plane, and provide the required copper area beneath the exposed pad. The pad is not only a thermal feature; its electrical connection must match the package drawing and pin-description table. Poor pad connection can increase die temperature and make supply behavior less predictable.
Design the 2 V to 5.5 V supply path for both steady-state and transient operation. Keep the bypass network close to VDD, provide adequate source impedance, and account for startup current in the regulator and PCB layout. Although the controller supports low-voltage operation, peripheral loads, LEDs, and communication transceivers can create voltage steps on the same rail. Validate the minimum VDD margin at the MCU pins across temperature and load.
Assign oscillator, programming, reset, and communications pins before finalizing the PCB because several pins have alternate peripheral functions. Route sensitive timing or measurement signals away from switching nodes and high-current actuator paths. If the internal oscillator is used, keep the MCU away from heat sources and noisy power stages; if an external oscillator is used, control trace length and return-path continuity. Review the pin table and oscillator recommendations in the family data sheet before release.
Do not treat a same-package family member as an automatic firmware-compatible replacement. The PIC16F631 has 1.75 KB of flash and 64 bytes of RAM, whereas larger family members change memory capacity and may alter peripheral availability or register behavior. For an approved substitution, rebuild the project, compare linker output and interrupt usage, exercise all connected I/O pins, and validate startup, timing, and temperature behavior in the final assembly.
زانیاری پابەندبوون
Compliance declarations for the exact PIC16F631-E/ML ordering code were not identified in the cited product and distributor information. Review current declarations and material documentation for the required procurement region before release.