Microchip Technology

PIC16F631-E/ML - 8-Bit 20MHz Microcontroller | Microchip

MPN: PIC16F631-E/ML ✓ 啟用中
2 V to 5.5 V Vdss 20-pin QFN with exposed pad Package 20 MHz Speed 1.75 KB (1K x 14 bits) Memory
MOQ: 1 |

PIC16F631-E/ML 概覽

The Microchip Technology PIC16F631-E/ML is an 8-bit PIC16F-series flash microcontroller with a 20 MHz maximum operating frequency, 1.75 KB of flash program memory, 64 bytes of RAM, and 18 I/O pins, housed in a 20-pin QFN package. Its 2 V to 5.5 V operating range makes it suitable for low-power embedded control systems that need compact packaging and broad voltage compatibility.

A PIC16F microcontroller is a compact embedded-processing device that combines a CPU core, program memory, data memory, I/O ports, timers, and communication peripherals on one integrated circuit. In the embedded-control hierarchy, the PIC16F631 belongs to the 8-bit microcontroller class and provides a direct implementation platform for small control loops, digital interfaces, and compact products with limited program-memory requirements.

The device provides 1.75 KB of flash memory, organized as 1K by 14 bits, together with 64 bytes of RAM and 18 I/O pins. Its operating voltage spans 2 V to 5.5 V, while its extended-temperature listing covers -40°C to +125°C. These characteristics make it useful when a board must operate across voltage variations, temperature extremes, and multiple embedded-control functions without requiring a larger microcontroller package.

The PIC16F631 architecture uses the Microchip mid-range 14-bit instruction set with on-board EEPROM data memory and integrated peripherals. Program memory supports repeated in-circuit programming, while the compact QFN land pattern helps reduce board area in space-constrained assemblies. Because the exposed-pad construction also provides a thermal path, PCB design must include a properly connected thermal land and adequate copper rather than treating the package as a leadless no-heat-sink device.

Typical uses include industrial control modules, compact sensor interfaces, building-automation controllers, appliance control boards, low-cost instrumentation, and compact motor or actuator control systems. The 18 available I/O pins provide useful connectivity for sensors, switches, indicators, and peripheral control, while the 2 V minimum operating voltage supports integration with low-energy power architectures.

Designers should verify every pin assignment in the manufacturer pin-description table, place decoupling capacitors close to VDD and VSS, and preserve continuity between the exposed thermal pad and the ground plane. Firmware must also account for the 1.75 KB program-memory limit by keeping boot logic, application code, and required library functions within the device's code space.

This page organizes the PIC16F631-E/ML specifications, sourcing information, family-level drop-in candidates, and practical PCB guidance into a design-focused reference. It also highlights where the MCU's small memory footprint, 18 I/O pins, and compact QFN package make it preferable to larger controllers.

直接替換替代品,適用於 PIC16F631-E/ML — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PIC16F631-E/ML (相同外形與佔位) — 差異在於 Package, Data EEPROM, I/O Pins, Instruction Set, Program Memory.

Microchip Technology
Package: 20-pin QFN (4 x 4 mm)
Data EEPROM: 64 bytes
I/O Pins: 11 (bidirectional)
Microchip Technology
Package: 20-QFN (4x4 mm) with EP
Data EEPROM: 128 bytes
I/O Pins: 11
Microchip Technology
Package: 20-pin QFN (4x4 mm), ML suffix
Data EEPROM: 128 bytes
I/O Pins: 18 digital I/O
Microchip Technology
Package: 20-QFN (4x4 mm)
Data EEPROM: 256 bytes
I/O Pins: 18
Microchip Technology
Package: 20-QFN (4 x 4 mm)
Instruction Set: Enhanced mid-range PIC 14-bit instruction architecture
Program Memory: 3.5 KB (2K x 14 words)
Microchip Technology
Package: 20-pin QFN (4x4 mm) with exposed pad
Data EEPROM: 256 bytes
Instruction Set: 35 instructions, 14-bit word
Microchip Technology
Package: 20-QFN, 4 x 4 mm
Data EEPROM: On-board EEPROM data memory
Instruction Set: 8-bit RISC

PIC16F631-I/ML

✅ 直接替換
Microchip Technology
📦 20-pin QFN with exposed pad
PIC 8-bit (mid-range x14) · 1.75 KB (1K x 14) · 128 bytes · 64 bytes · 20 MHz · 5 MIPS · 2.0 V to 5.5 V (industrial: 4.5 V to 5.5 V) · 11 (bidirectional)

聯絡詢價

查看資料表 →

PIC16F685-I/ML

✅ 直接替換
📦 20-pin QFN with exposed pad
Uses approximately 2 KB flash versus 1.75 KB on PIC16F631, while retaining the 20-pin QFN format and 18 I/O architecture

📋 參考替代品(不在目錄中)

PIC16F687-I/ML

✅ 直接替換
Microchip Technology
📦 20-pin QFN with exposed pad
8-bit Flash microcontroller · Mid-range PIC x14 · 20 MHz · 3.5 KB (2K x 14 words) · 128 bytes · Present · 2.0 V to 5.5 V · 18 pins

聯絡詢價

查看資料表 →

PIC16F677-I/ML

✅ 直接替換
Microchip Technology
📦 20-pin QFN with exposed pad
PIC 8-bit mid-range (x14 RISC) · 3.5 KB Flash (2K x 14 words) · 256 bytes · 128 bytes · 20 MHz · 200 ns · 2.0 V to 5.5 V · 18

聯絡詢價

查看資料表 →

PIC16F689-I/ML

✅ 直接替換
📦 20-pin QFN with exposed pad
Provides approximately 3.5 KB flash versus 1.75 KB on PIC16F631, while retaining the 20-pin QFN format and 18 I/O architecture

📋 參考替代品(不在目錄中)

PIC16F690-I/ML

✅ 直接替換
Microchip Technology
📦 20-pin QFN with exposed pad
8-bit CMOS Flash microcontroller · 20 MHz · 7 KB flash · 4K x 14 words · 256 bytes · On-board EEPROM data memory · 12 I/O ports · 2.0 V to 5.5 V

聯絡詢價

查看資料表 →

PIC16F631-E/ML 最大額定值與電氣特性

Device Type 8-bit flash microcontroller
Series PIC16F
Maximum CPU Frequency 20 MHz
Program Memory 1.75 KB (1K x 14 bits)
Data RAM 64 bytes
I/O Pin Count 18 pins
Operating Voltage Range 2 V to 5.5 V
工作溫度範圍 -40°C to +125°C
Program Memory Type Flash
Data Memory On-chip EEPROM
Instruction Set Mid-range 14-bit
封裝 20-pin QFN with exposed pad
安裝類型 Surface mount
Shipping Package Tube
Programmable I/O Digital I/O

PIC16F631-E/ML 腳位配置

QFN-20 Package Pinout Diagram QFN-20 4x4mm, P0.5mm, EP 2.5x2.5mm, JEDEC MO-220. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 QFN-20
腳位 1 RA0/OSC-E — RA0 input/output or external oscillator input
腳位 2 RA1/OSC-E — RA1 input/output or external oscillator output
腳位 3 RA2/INT0/C1OUT — RA2 input/output, external interrupt input, or comparator output
腳位 4 RA3/INT1 — RA3 input/output or external interrupt input
腳位 5 RC0 — RC0 input/output
腳位 6 RC1 — RC1 input/output
腳位 7 RC2 — RC2 input/output
腳位 8 RC3 — RC3 input/output
腳位 9 RC4 — RC4 input/output
腳位 10 RC5 — RC5 input/output
腳位 11 VSS — Ground reference
腳位 12 VDD — Positive supply input
腳位 13 RA4/T0CKI — RA4 input/output or Timer0 clock input
腳位 14 RA5 — RA5 input/output
腳位 15 RC6 — RC6 input/output
腳位 16 RC7 — RC7 input/output
腳位 17 RB0/INT — RB0 input/output or interrupt input
腳位 18 RB1 — RB1 input/output
腳位 19 RB2 — RB2 input/output
腳位 20 RB3 — RB3 input/output

典型應用

PIC16F631-E/ML 適用於 6 應用s: Compact Industrial Sensor Interface, Building Automation Controller, Appliance Control Module, Low-Voltage Measurement Hub, Compact Motor and Actuator Control, Instrumentation and Data Logger.

🏭

Compact Industrial Sensor Interface

The PIC16F631-E/ML suits compact sensor-interface boards that need local acquisition, control, and status reporting at low voltage. Its 18 I/O pins can support digital sensors, switches, alarm outputs, and indicator drivers without requiring a larger package, while the 2 V to 5.5 V operating range accommodates common low-energy rail choices. The 20 MHz CPU provides useful margin for interrupt-driven sampling and simple protocol handling. Because the controller has only 1.75 KB of flash and 64 bytes of RAM, firmware should use efficient buffering and avoid oversized libraries. A system requiring larger buffers, more flash, or advanced communications should evaluate PIC16F685-I/ML or PIC16F690-I/ML instead.

🧩

Building Automation Controller

PIC16F631-E/ML can serve as the local controller for a compact building-automation module that monitors switches, drives relay indicators, and coordinates an actuator or environmental sensor. Its -40°C to +125°C listing supports equipment exposed to wide internal temperature variation, while the low 2 V minimum operating voltage provides flexibility in low-power supply designs. The 18 available I/O pins permit direct connection to multiple digital inputs and outputs, reducing the need for expansion logic. Firmware should include debouncing, fault-state handling, and communication retries because the device's limited memory makes robust code structure important. For protocols with larger buffers or denser data handling, PIC16F690-I/ML provides more memory within the same 20-pin QFN family.

🔧

Appliance Control Module

The PIC16F631-E/ML is appropriate for appliance subassemblies requiring deterministic local control of motors, heaters, indicators, and user inputs. Its 18 I/O pins are useful for switch matrices, status LEDs, and discrete control outputs, while 20 MHz operation supports responsive timing and state-machine control. The 2 V to 5.5 V supply range supports integration into appliance power systems when suitable regulation is present. The principal design constraint is the 1.75 KB flash limit, which makes code organization essential for safety monitoring and multiple operating modes. Designers should verify that the thermal profile of the QFN assembly remains suitable under sustained actuator load, especially where the exposed pad must dissipate heat into the PCB copper area.

📊

Low-Voltage Measurement Hub

PIC16F631-E/ML can coordinate a small measurement hub that combines several digital inputs with local status signaling and a serial data interface. The 2 V to 5.5 V operating range allows direct use of low-power sensor rails, while 18 I/O pins leave sufficient connectivity for sensors, triggers, and local indicators. Its 20 MHz CPU supports measurement sequencing and compact digital filtering, but the 64-byte RAM imposes strict limits on simultaneous samples and protocol buffers. Use interrupt-driven acquisition and move bulk processing to a higher-level controller when necessary. The PIC16F690-I/ML is a practical family choice if increased flash and RAM remove buffer constraints while preserving the 20-pin QFN footprint.

⚡

Compact Motor and Actuator Control

PIC16F631-E/ML can act as the command controller above a motor driver or actuator interface, coordinating direction, limit inputs, and fault reporting. The controller's 18 I/O pins are sufficient for discrete command and status signals, and its 20 MHz execution rate allows responsive supervisory control around a dedicated power stage. The MCU should not drive high-current loads directly; instead, use appropriately rated driver circuitry and protect control paths against inductive transients. The -40°C to +125°C listing is useful in mechanically hot environments, but thermal verification remains essential near power converters. PIC16F690-I/ML is preferable when the application requires additional protocol handling or state history beyond the PIC16F631 memory limits.

🖥️

Instrumentation and Data Logger

PIC16F631-E/ML can support a compact instrumentation front end that records digital events, controls a display or indicator, and forwards status through a serial or network interface. Its 18 I/O pins simplify connection of switches, trigger inputs, and alarm outputs, while the broad 2 V to 5.5 V range supports mixed low-voltage circuitry. The 1.75 KB flash and 64-byte RAM are adequate for short acquisition buffers and lightweight protocols but may be restrictive for long-term logging. In such designs, use a separate nonvolatile storage device or select a PIC16F690-I/ML with more memory. Validate oscillator start-up and timing margin across temperature because accurate instrumentation depends on stable timing from startup through operation.

What are the key specifications of PIC16F631-E/ML that engineers should know?
The PIC16F631-E/ML is an 8-bit flash microcontroller rated for 20 MHz operation with 1.75 KB of program memory, 64 bytes of RAM, 18 I/O pins, and a 2 V to 5.5 V supply range. According to the Microchip PIC16F631/677/685/687/689/690 data sheet, it uses the mid-range 14-bit architecture and includes on-board EEPROM data memory. The device is offered in a compact 20-pin QFN with an exposed pad, making it appropriate for small embedded-control boards requiring low voltage tolerance and a limited pin count.
What is the operating voltage of PIC16F631-E/ML?
The PIC16F631-E/ML operates from 2 V to 5.5 V according to the Microchip product page and manufacturer data sheet. This range allows the controller to operate directly from common low-voltage power rails when the associated peripherals and sensor interfaces are compatible with the selected rail. Designers should still verify startup, operating, and brownout behavior at their specific supply voltage before committing the device to a production design.
Where can I download the PIC16F631-E/ML datasheet PDF?
The official PIC16F631/677/685/687/689/690 data sheet can be downloaded from Microchip's document URL at https://ww1.microchip.com/downloads/en/DeviceDoc/40001262F.pdf. It covers the family's electrical characteristics, memory organization, peripherals, timing, and package information. The separate device errata documentation should also be reviewed because it identifies minor operational differences and recommended software or hardware workarounds for the applicable silicon revisions.
Where can I find the PIC16F631-E/ML pinout?
The PIC16F631-E/ML pinout is shown in the Microchip PIC16F631/677/685/687/689/690 data sheet and the device's pin-description table. Use that table to assign all 20 numbered pins for the 20-pin QFN package and to confirm the exposed-pad connection. The manufacturer data sheet is the controlling document for pin names, direction, analog functions, and alternate peripheral assignments because a single physical pin may support multiple functions.
Is PIC16F631-E/ML suitable for industrial control applications?
The PIC16F631-E/ML is suitable for many industrial control applications because it operates from 2 V to 5.5 V and is listed across -40°C to +125°C. Its 18 I/O pins can connect discrete sensors, switches, indicators, and actuators, while the 20 MHz CPU supports moderate control-loop and interface workloads. The 1.75 KB flash limit requires careful firmware sizing, so applications with substantial protocol stacks or user-interface code may need a larger-memory MCU.
What can replace PIC16F631-E/ML?
The closest same-family drop-in candidates are PIC16F631-I/ML, PIC16F677-I/ML, PIC16F685-I/ML, PIC16F687-I/ML, PIC16F689-I/ML, and PIC16F690-I/ML when their larger memory resources meet the firmware requirements. According to the Microchip family data sheet, these devices share the 20-pin QFN platform, but the grade suffixes and flash capacities differ. Firmware, pin-function, peripheral, timing, and qualification requirements must be reviewed before approving any substitute.
Is PIC16F631-E/ML the same as PIC16F631-I/ML?
PIC16F631-E/ML and PIC16F631-I/ML share the same 8-bit PIC16F631 architecture, 20 MHz maximum speed, 1.75 KB flash, 64-byte RAM, 18 I/O pins, and 20-pin QFN format. Their principal distinction is the temperature-grade suffix in the ordering code. For designs that require the full -40°C to +125°C range, confirm the exact ordering code on the purchasing document rather than treating the E and I variants as interchangeable without reviewing their commercial temperature specifications.
When should I choose PIC16F631-E/ML over PIC16F690-I/ML?
Choose PIC16F631-E/ML when 1.75 KB of flash and 64 bytes of RAM are sufficient for the application and the 20-pin QFN footprint is required. Choose PIC16F690-I/ML when firmware or data handling requires the larger memory resources of the PIC16F690 family. Both occupy the same broad 20-pin QFN platform, so the decision should be based on validated memory capacity, required peripherals, timing, and application qualification rather than package size alone.
What is the best drop-in replacement for PIC16F631-E/ML?
PIC16F631-I/ML is the closest drop-in candidate because it retains the PIC16F631 device identity, 20-pin QFN footprint, 20 MHz speed, 1.75 KB flash, 64-byte RAM, and 18 I/O pins. For designs that outgrow the PIC16F631 memory limits, PIC16F685-I/ML, PIC16F687-I/ML, PIC16F677-I/ML, PIC16F689-I/ML, or PIC16F690-I/ML may provide additional flash or RAM in the same package family. Confirm pin-level compatibility, peripheral availability, and temperature requirements for the finished equipment.
PIC16F631-E/ML vs PIC16F1824-I/ML - which is better for a new design?
PIC16F631-E/ML is the more conservative choice when the design specifically targets the established PIC16F631 memory size, peripheral set, and 18-I/O architecture. PIC16F1824-I/ML belongs to a newer PIC16F family and should be selected only after its pin assignments, peripheral functions, memory organization, and timing have been mapped against the complete design. Both use a compact 20-pin QFN form, but package similarity alone does not prove firmware or peripheral compatibility.
Where can I buy PIC16F631-E/ML online?
Use the Request a Quote form on this page to request PIC16F631-E/ML availability, current commercial terms, and lead time. The exact ordering code includes the ML QFN package and the E temperature-grade suffix, so both details should remain unchanged in the request. Confirm authorized-channel traceability, date codes, and the quantity-break schedule when preparing a production purchase order.
What is the price of PIC16F631-E/ML?
The current commercial price for PIC16F631-E/ML should be obtained through the Request a Quote form on this page. The quantity, package suffix, date code, and required traceability can affect pricing and lead time, so a single nominal figure may not represent a production order. Use the form for a current quotation matched to the exact MPN rather than relying on an unrelated package, grade, or reel-code listing.
What is the lead time for PIC16F631-E/ML?
The current lead time for PIC16F631-E/ML should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing condition, package configuration, date code, and traceability requirements. Include the production schedule and any required certification documents in the request so the resulting quotation reflects the complete sourcing requirement.
Is PIC16F631-E/ML in stock?
Current stock status for PIC16F631-E/ML should be confirmed through the Request a Quote form on this page. State the required quantity, target date, acceptable date codes, and whether factory-sealed packaging is required. The exact E/ML ordering suffix must be retained because availability for another grade or package does not establish availability for this device.
What is the best Microchip equivalent for PIC16F631-E/ML?
PIC16F631-I/ML is the closest Microchip equivalent when a same-package device with unchanged core, memory, and I/O configuration is required. Larger PIC16F family devices such as PIC16F685-I/ML and PIC16F690-I/ML are alternatives when the application needs more program or data memory, but they are not parameter-identical substitutes. Use the manufacturer family data sheet and pin-description tables to verify that every connected signal and firmware dependency remains supported.

工程參考資料,適用於 PIC16F631-E/ML — 比較、設計指引及合規資訊。

選型指南

Choose PIC16F631-E/ML when the application can fit within 1.75 KB of flash and 64 bytes of RAM while requiring 18 I/O pins, operation from 2 V to 5.5 V, and a compact 20-pin QFN footprint. PIC16F631-I/ML is the closest family option when the same electrical architecture and memory configuration are needed with the I temperature suffix. PIC16F685-I/ML or PIC16F687-I/ML are preferable when additional flash removes a firmware constraint while preserving the QFN package. PIC16F677-I/ML, PIC16F689-I/ML, or PIC16F690-I/ML suit designs that need approximately 3.5 KB of flash. In every case, verify peripheral assignments, interrupt behavior, oscillator configuration, timing, and temperature requirements against the manufacturer family data sheet rather than relying only on package similarity.

與替代品比較

參數 本產品 PIC16F631-I/ML PIC16F685-I/ML PIC16F687-I/ML PIC16F677-I/ML PIC16F690-I/ML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-pin QFN with exposed pad 20-pin QFN with exposed pad 20-pin QFN with exposed pad 20-pin QFN with exposed pad 20-pin QFN with exposed pad 20-pin QFN with exposed pad
CPU Architecture 8-bit PIC16 mid-range 8-bit PIC16 mid-range 8-bit PIC16 mid-range 8-bit PIC16 mid-range 8-bit PIC16 mid-range 8-bit PIC16 mid-range
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Program Memory 1.75 KB 1.75 KB Approximately 2 KB Approximately 2 KB Approximately 3.5 KB Approximately 3.5 KB
I/O Pin Count 18 pins 18 pins 18 pins 18 pins 18 pins 18 pins
Operating Voltage Range 2 V to 5.5 V 2 V to 5.5 V 2 V to 5.5 V 2 V to 5.5 V 2 V to 5.5 V 2 V to 5.5 V
Temperature Grade Suffix E I I I I I

主要差異化特點

  • Lowest-memory option within the qualified 20-pin QFN comparison set (對比PIC16F685-I/ML)
  • Exact same-package PIC16F631 option with a different commercial temperature suffix (對比PIC16F631-I/ML)
  • More flash capacity available without changing to a larger package (對比PIC16F690-I/ML)
  • 18 I/O pins support compact multi-signal control boards (對比PIC16F677-I/ML)

設計說明

Follow the manufacturer QFN land pattern and exposed-pad recommendation exactly. Place the MCU's VDD bypass capacitor adjacent to the supply pin, connect VSS to a low-impedance ground plane, and provide the required copper area beneath the exposed pad. The pad is not only a thermal feature; its electrical connection must match the package drawing and pin-description table. Poor pad connection can increase die temperature and make supply behavior less predictable.

Design the 2 V to 5.5 V supply path for both steady-state and transient operation. Keep the bypass network close to VDD, provide adequate source impedance, and account for startup current in the regulator and PCB layout. Although the controller supports low-voltage operation, peripheral loads, LEDs, and communication transceivers can create voltage steps on the same rail. Validate the minimum VDD margin at the MCU pins across temperature and load.

Assign oscillator, programming, reset, and communications pins before finalizing the PCB because several pins have alternate peripheral functions. Route sensitive timing or measurement signals away from switching nodes and high-current actuator paths. If the internal oscillator is used, keep the MCU away from heat sources and noisy power stages; if an external oscillator is used, control trace length and return-path continuity. Review the pin table and oscillator recommendations in the family data sheet before release.

Do not treat a same-package family member as an automatic firmware-compatible replacement. The PIC16F631 has 1.75 KB of flash and 64 bytes of RAM, whereas larger family members change memory capacity and may alter peripheral availability or register behavior. For an approved substitution, rebuild the project, compare linker output and interrupt usage, exercise all connected I/O pins, and validate startup, timing, and temperature behavior in the final assembly.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations for the exact PIC16F631-E/ML ordering code were not identified in the cited product and distributor information. Review current declarations and material documentation for the required procurement region before release.

相關搜尋

pic16f631 datasheet PIC16F631-E/ML datasheet PIC16F631-E/ML datasheet pdf PIC16F631-E/ML pinout PIC16F631-E/ML specifications PIC16F631-E/ML equivalent PIC16F631-E/ML replacement PIC16F631-E/ML cross reference PIC16F631-E/ML vs PIC16F690-I/ML PIC16F631-E/ML 20-pin QFN PIC16F631-E/ML price PIC16F631-E/ML stock

相關元件與詞彙

Microchip Technology PIC16F631-E/ML PIC16F631-I/ML PIC16F685-I/ML PIC16F687-I/ML PIC16F677-I/ML PIC16F689-I/ML PIC16F690-I/ML PIC16F 8-bit microcontroller embedded microcontroller flash program memory on-chip EEPROM mid-range 14-bit instruction set 20-pin QFN QFN package family surface mount SMD digital I/O operating voltage program memory data RAM industrial control building automation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情