Microchip Technology

PIC16F685-E/ML - 20MHz 8-Bit Flash MCU | Microchip Technology

MPN: PIC16F685-E/ML ✓ چالاک
2.0 V to 5.5 V Vdss 20-QFN, 4 x 4 mm Package 20 MHz Speed 7 KB Flash (4K x 14 words) Memory
MOQ: 1 |

PIC16F685-E/ML گشتی

The Microchip Technology PIC16F685-E/ML is an 8-bit PIC16 Flash microcontroller operating at up to 20 MHz, with 7 KB of program Flash, 256 bytes of RAM and 18 I/O pins in a 20-QFN package measuring 4 x 4 mm. It accepts a 2.0 V to 5.5 V operating supply and provides on-chip EEPROM data memory for applications that require nonvolatile parameter storage.

A PIC16 microcontroller is an embedded-control semiconductor that combines a processor core, program memory, data memory, I/O ports, timers, and communication peripherals on one integrated circuit. The PIC16F685 belongs to the mid-range x14 architecture, commonly described as an enhanced RISC architecture with compact, single-word instructions and integrated Flash program memory. This places it in the hierarchy of embedded controllers, microcontrollers, and integrated circuits.

Key features include a 20 MHz maximum CPU frequency, 7 KB Flash organized as 4K x 14 program words, 256 bytes of RAM, 18 general-purpose I/O pins, and on-board EEPROM. The 2.0 V to 5.5 V operating range supports low-voltage embedded systems, while the small 4 x 4 mm QFN package reduces board area compared with larger 20-pin leaded packages. Its Flash-based program memory also permits in-system programming and simplifies firmware updates.

The PIC16F685 integrates timers, serial communication, comparator, and other control resources around the mid-range PIC16 core. The exposed-pad QFN construction supports improved heat transfer when the PCB provides a properly sized ground pad and thermal vias. Engineers must follow the package drawing and pin-assignment table when routing high-current I/O, programming signals, and analog or timing functions.

Typical uses include compact industrial controllers, low-cost sensor nodes, household appliance controls, LED lighting controllers, battery-powered instruments, and small motor-control products. Its combination of 18 I/O pins, EEPROM, and a wide supply range is especially useful where a board needs configurable mixed-signal inputs, digital outputs, and retained configuration data without adding an external memory device.

A critical design consideration is decoupling. Place the device's supply bypass capacitors close to VDD and VSS, preserve the exposed-pad ground connection, and confirm that every signal assigned to a multiplexed pin remains valid in the selected configuration. The programming connector and bootloader circuit should also be designed around the device's programming and reset requirements.

This product page consolidates the device identity, package details, manufacturer documentation, practical application guidance, and same-package replacement choices. The alternatives and comparison table help engineers evaluate footprint, memory, temperature, and peripheral differences before approving a redesign.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16F685-E/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F685-E/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, ADC, I/O Pins, Data EEPROM.

Microchip Technology
Package: 20-pin QFN (4x4 mm), ML suffix
Timers: 1 x 8-bit, 1 x 16-bit
ADC: 10-bit, up to 12 channels
Microchip Technology
Package: 20-pin QFN (4x4 mm) with exposed pad
Timers: 2x 8-bit, 1x 16-bit
ADC: 10-bit, up to 12 channels
Microchip Technology
Package: 20-QFN (4 x 4 mm)
Microchip Technology
Package: QFN 4x4 mm 16-pin (ML)
Timers: 2x 8-bit + 1x 16-bit
ADC: 10-bit, 8 channels
Microchip Technology
Package: 16-pin QFN (4 x 4 mm), /ML suffix
Timers: 1 x 16-bit (TMR1 with capture/compare/PWM), 1 x 8-bit (TMR2)
ADC: 10-bit, 8-channel
Microchip Technology
Package: 20-pin QFN (4x4 mm) with exposed pad
Timers: Two 8-bit, one 16-bit
ADC: 12-bit, up to 12 channels
Microchip Technology
Data EEPROM: On-board EEPROM data memory

PIC16F685-I/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 20-QFN (4x4 mm)
Same 7 KB Flash, 256-byte RAM, 20 MHz speed, 18 I/O pins, and 20-QFN footprint; -I uses the industrial temperature grade instead of -E

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC16F687-I/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 20-QFN (4x4 mm)
8-bit Flash microcontroller · Mid-range PIC x14 · 20 MHz · 3.5 KB (2K x 14 words) · 128 bytes · Present · 2.0 V to 5.5 V · 18 pins

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F688-I/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 20-QFN (4x4 mm)
Flash · 7 KB (4K x 14 words) · 256 bytes · 256 bytes · PIC16F Mid-Range 8-bit RISC · 14-bit · 35 · 20 MHz (5 MIPS, 200 ns instruction cycle)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F689-I/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 20-QFN (4x4 mm)
Same 20 MHz core, 18 I/O pins, and 20-QFN footprint; Flash increases from 7 KB to 14 KB (+100%), with different peripheral allocation

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC16F690-I/ML

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 20-QFN (4x4 mm)
8-bit CMOS Flash microcontroller · 20 MHz · 7 KB flash · 4K x 14 words · 256 bytes · On-board EEPROM data memory · 12 I/O ports · 2.0 V to 5.5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F685-E/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit Flash microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 7 KB Flash (4K x 14 words)
RAM 256 bytes
EEPROM Data Memory On-board
Operating Voltage Range 2.0 V to 5.5 V
General-Purpose I/O Pins 18 pins
Total Pin Count 20 pins
پاکێج 20-QFN, 4 x 4 mm
Package Type QFN with exposed pad
Architecture Mid-range PIC x14 architecture
Program Memory Type Flash
جۆری دامەزراندن Surface mount
Temperature Grade Extended temperature grade indicated by -E suffix
دۆخی RoHS Compliant

ڕێکخستنی پینی PIC16F685-E/ML

QFN-20 Package Pinout Diagram QFN-20 4x4mm, P0.5mm, EP 2.5x2.5mm, JEDEC MO-220. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 QFN-20
پین 1 RA0/AN0/C1IN+ — PORTA digital I/O, analog input, or comparator input
پین 2 RA1/AN1/C1IN- — PORTA digital I/O, analog input, or comparator input
پین 3 RA2/AN2/VREF-/CVREF — PORTA digital I/O, analog input, voltage reference, or comparator output
پین 4 RA3/AN3/VREF+/C1IN+ — PORTA digital I/O, analog input, voltage reference, or comparator input
پین 5 RC0/T1OSO — PORTC digital I/O or Timer1 oscillator output
پین 6 RC1/T1OSI/CCP2 — PORTC digital I/O, Timer1 oscillator input, or capture/compare output
پین 7 RC2/P1A/CCP1 — PORTC digital I/O, PWM output, or capture/compare output
پین 8 RC3/SCK/SCL — PORTC digital I/O, SPI clock, or I2C clock
پین 9 RC4/SDI/SDA — PORTC digital I/O, SPI data input, or I2C data
پین 10 RC5/SDO — PORTC digital I/O or SPI data output
پین 11 VSS — Ground supply connection
پین 12 RB0/AN4 — PORTB digital I/O or analog input
پین 13 RB1/AN5 — PORTB digital I/O or analog input
پین 14 RB2/AN6 — PORTB digital I/O or analog input
پین 15 RB3/AN7 — PORTB digital I/O or analog input
پین 16 VDD — Positive supply connection
پین 17 OSC1/CLKIN — Oscillator input or external clock input
پین 18 OSC2/CLKOUT — Oscillator output or external clock output
پین 19 RA4/T0CKI — PORTA digital I/O or Timer0 clock input
پین 20 RA5/SS/C2OUT — PORTA digital I/O, SPI slave select, or comparator output

بەکارهێنانە باوەکان

PIC16F685-E/ML گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor and Control Node, Battery-Powered Environmental Monitor, LED Lighting Controller, Household Appliance Controller, Low-Cost Data Acquisition Module, Small Motor and Valve Controller.

🏭

Industrial Sensor and Control Node

The PIC16F685-E/ML fits compact industrial sensor nodes because it combines 18 I/O pins with a 2.0 V to 5.5 V operating range and 256 bytes of RAM. The 18 available pins can support digital sensors, alarm inputs, relay outputs, status indicators, and a communications interface without requiring a large external pin driver. Its 7 KB Flash budget is suitable for moderate acquisition, filtering, threshold, and reporting logic, while on-board EEPROM can retain calibration or configuration values. The 4 x 4 mm QFN package also leaves more board area for sensing hardware and power conditioning. Before layout release, verify every multiplexed pin assignment and provide the exposed pad with a continuous thermal-via and ground-plane connection.

🧩

Battery-Powered Environmental Monitor

The PIC16F685-E/ML is suitable for a battery-powered environmental monitor when its 2.0 V minimum operating voltage matches the available regulated rail. The controller can sample external sensors, apply threshold logic, record operating state in EEPROM, and control a low-duty-cycle radio or indicator. Its 256 bytes of RAM requires disciplined buffer management, while the 7 KB Flash allocation must be checked against the complete firmware rather than the application code alone. Sleep-mode behavior, timer wake sources, and average current should be evaluated with the sensor and radio included. A 20-QFN footprint simplifies compact enclosure layouts, but the exposed ground pad and local bypass capacitor must remain directly beneath and adjacent to the device.

💡

LED Lighting Controller

The PIC16F685-E/ML can serve as the central controller in a small LED lighting system because its 18 I/O pins provide ample digital outputs for channels, mode buttons, and fault signals. Timers and PWM-capable resources can coordinate dimming sequences, while the 20 MHz operating speed supports responsive user-interface handling and status updates. The 7 KB Flash capacity is appropriate for compact lighting effects, configuration tables, and communication routines, and EEPROM can preserve scene or calibration settings. Design the LED driver stage separately because the MCU does not directly replace a constant-current LED power stage. Keep high-current switching loops physically separated from sensitive timing inputs and route decoupling directly to the supply pins.

🏠

Household Appliance Controller

The PIC16F685-E/ML is appropriate for a compact household appliance controller where a board must coordinate switches, indicators, sensors, and a motor or heater driver. Its 2.0 V to 5.5 V range supports common low-voltage control systems, while EEPROM can retain operating profiles without using scarce RAM. The mid-range x14 architecture provides a practical platform for straightforward state-machine firmware, timers, and communication routines. Because the package provides only 20 pins, prioritize pin multiplexing carefully and reserve a programming connector if field updates are expected. Use suitable protection networks for inductive loads and maintain separation between the controller, switching devices, and high-current power paths to reduce electrical noise and temperature rise.

📟

Low-Cost Data Acquisition Module

The PIC16F685-E/ML can form the control section of a low-cost data-acquisition module when the measurement rate and buffer size are modest. Its 20 MHz maximum frequency supports digital filtering and control calculations, while 18 I/O pins accommodate digital inputs, sensor interfaces, status signals, and an external nonvolatile memory bus if required. The 7 KB Flash capacity favors compact firmware with focused acquisition routines, and the 256-byte RAM should be allocated with stack and interrupt-service overhead included in the analysis. Analog-to-digital conversion details are not specified in the product listing, so confirm the required conversion resources in the manufacturer data sheet before assigning this device. Use a short analog ground path and place bypass capacitance at the supply pins.

🔧

Small Motor and Valve Controller

The PIC16F685-E/ML can control small motors, solenoids, or valves in compact equipment where deterministic sequencing is more important than high processor performance. Timers, interrupt capability, and 18 I/O pins support input monitoring, position or limit sensing, and driver-enable outputs. The 2.0 V to 5.5 V operating range makes the controller suitable for low-voltage systems, while Flash supports repeatable firmware and EEPROM can store operating limits or configuration data. The MCU should drive transistor or gate-driver stages rather than load a motor or valve directly. Design shutdown behavior, flyback protection, and fault inputs independently so a firmware fault does not leave the actuator energized. Keep switching current away from sensitive timing and communication traces.

What are the key specifications of PIC16F685-E/ML that engineers should know?
The PIC16F685-E/ML combines a 20 MHz maximum CPU frequency, 7 KB of Flash program memory, 256 bytes of RAM, and 18 I/O pins in a 20-QFN package. According to the Microchip PIC16F631/677/685/687/689/690 data sheet 40001262F, the device operates from 2.0 V to 5.5 V and uses the mid-range x14 instruction architecture. It also includes on-board EEPROM, making it suitable for compact embedded controllers that need programmable Flash, retained configuration data, and a small surface-mount footprint.
Where can I download the PIC16F685 datasheet PDF?
The PIC16F685 datasheet PDF is available from Microchip Technology through the device documentation link and the family data sheet 40001262F. The document covers the PIC16F631, PIC16F677, PIC16F685, PIC16F687, PIC16F689, and PIC16F690 devices, including the PIC16F685-E/ML package option. Use the pin-description table and package drawings when assigning the 20-QFN pins, and consult the electrical characteristics table for operating limits before finalizing the power supply and external-component design.
What is the operating voltage of PIC16F685-E/ML?
The PIC16F685-E/ML operates from 2.0 V to 5.5 V. Microchip's product description identifies this range as a standard feature of the low-pin-count PIC16 Flash family, while data sheet 40001262F provides the associated electrical characteristics. This supply range allows the controller to operate directly from common low-voltage rails. Ensure that the selected regulator has adequate headroom, transient response, and decoupling for the complete board rather than relying on the nominal supply range alone.
How much Flash memory and RAM does PIC16F685-E/ML have?
The PIC16F685-E/ML provides 7 KB of Flash program memory, organized as 4K x 14 words, together with 256 bytes of RAM. According to the Microchip family data sheet 40001262F, the register file for the PIC16F685 is 256 x 8 bits and access can be direct or indirect through the File Select Register. The on-chip EEPROM adds a separate nonvolatile area for configuration or calibration values without requiring an external serial memory.
Where can I find the PIC16F685-E/ML pinout?
The PIC16F685-E/ML pinout is in the pin-description table and package drawings in Microchip data sheet 40001262F. The device uses a 20-QFN package with an exposed pad, and the exposed pad is connected to ground. Use the numbered pin table when assigning oscillator, programming, communication, I/O, power, and analog functions because several pins are multiplexed. Follow the recommended PCB land pattern and thermal-via arrangement rather than treating the QFN footprint as a generic 20-pin package.
How do I program the PIC16F685-E/ML?
Program the PIC16F685-E/ML through the programming interface and in-system programming procedure defined by Microchip for the PIC16 mid-range family. The Flash architecture supports in-circuit programming, but the connector, programming voltage, and signal sequencing must match the relevant programming specification and data sheet 40001262F. Add test points or a tag-connect footprint where practical, provide a reliable ground path, and ensure the bootloader does not conflict with application use of the programming pins.
What can replace the PIC16F685-E/ML on the same PCB footprint?
The PIC16F685-I/ML is the closest same-package replacement identified for the PIC16F685-E/ML, using the same 20-QFN 4 x 4 mm outline but the industrial temperature suffix. The PIC16F687-I/ML, PIC16F688-I/ML, PIC16F689-I/ML, and PIC16F690-I/ML are also same-brand, same-footprint candidates, but their Flash capacities and peripheral sets differ. Review the shared pin table, unused peripheral requirements, memory demand, and qualification needs before treating any of them as a production drop-in replacement.
Is PIC16F685-I/ML the same as PIC16F685-E/ML?
The PIC16F685-I/ML and PIC16F685-E/ML share the same PIC16F685 device identity, 20 MHz maximum frequency, 7 KB Flash memory, 256 bytes of RAM, 18 I/O pins, and 20-QFN footprint. Their principal ordering-code distinction is temperature grade, with -E and -I identifying different temperature classifications. The PIC16F685-I/ML is therefore the appropriate candidate when the industrial-grade option is acceptable and its operating limits match the application.
PIC16F685-E/ML vs PIC16F687-I/ML — which is better for a compact controller?
Choose the PIC16F685-E/ML when 7 KB of Flash and its specific peripheral mix are sufficient; choose the PIC16F687-I/ML when the larger program-memory capability of the PIC16F687 family is needed. Both are Microchip 20-pin Flash devices in the same QFN family, but their memory and peripheral resources are not identical. Compare the relevant data-sheet tables for communications, timers, analog functions, and pin multiplexing, then confirm that the higher Flash capacity does not create an unacceptable cost or board-space increase.
When should I choose PIC16F685-E/ML over PIC16F689-I/ML?
Choose the PIC16F685-E/ML when 7 KB of Flash, 256 bytes of RAM, 18 I/O pins, and the existing peripheral allocation satisfy the firmware design. Select the PIC16F689-I/ML instead when its larger Flash-memory option reduces code-packing pressure or supports additional application code. Both remain within the same Microchip PIC16 family, so software tooling and development habits are similar, but the final choice should follow memory usage, required peripherals, temperature range, and verified package compatibility.
Is PIC16F685-E/ML suitable for battery-powered sensor nodes?
The PIC16F685-E/ML is suitable for low-voltage sensor nodes when its 2.0 V to 5.5 V operating range matches the battery regulator's output. Its 256 bytes of RAM is modest, so the firmware must use the available RAM carefully, while the 7 KB Flash budget must include application code, boot logic, and configuration handling. Evaluate sleep-mode behavior, peripheral activity, and regulator efficiency in the complete system rather than relying only on the device's maximum clock frequency.
Where can I buy PIC16F685-E/ML and check its lead time?
Use the Request a Quote form on this page to request PIC16F685-E/ML availability, current lead time, minimum order quantity, and shipment planning for the exact MPN. The requested device is the Microchip Technology 20-QFN, 4 x 4 mm configuration with 7 KB Flash and 18 I/O pins. Including the target quantity and required delivery date in the request helps procurement confirm the appropriate production schedule without relying on a stale inventory listing.
How much does PIC16F685-E/ML cost?
Submit the PIC16F685-E/ML MPN through the Request a Quote form on this page to obtain a current quotation for the requested quantity. The quote request identifies the exact 20-QFN, 4 x 4 mm device with 7 KB Flash, 256 bytes of RAM, 18 I/O pins, and a 2.0 V to 5.5 V operating range. This avoids ambiguity between device variants, package forms, temperature grades, and quantity breaks before a purchase order is created.
Is PIC16F685-E/ML in stock?
Request the current stock position and lead time for PIC16F685-E/ML through the Request a Quote form on this page. Specify the required quantity, target date, and whether reel or tube packing is needed for your production process. The device is a 20-QFN, 4 x 4 mm Microchip Flash MCU rated from 2.0 V to 5.5 V, so a stock response for the exact ordering code and packaging form is the most useful basis for procurement planning.
What is the best cross-brand equivalent for PIC16F685-E/ML?
No cross-brand drop-in equivalent is confirmed for the PIC16F685-E/ML because a valid replacement must match the 20-QFN footprint, pin multiplexing, Flash and RAM resources, operating voltage, peripherals, and firmware-tool requirements. The identified same-brand candidates preserve the Microchip PIC16 family path and use the shared family documentation. For a cross-brand migration, treat it as a redesign rather than an automatic substitution, and use Microchip's cross-reference and product-selection resources to verify any proposed MCU against the required functions.

داتای سەرچاوەی ئەندازیاری بۆ PIC16F685-E/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the PIC16F685-E/ML when a compact 20-QFN controller needs a 20 MHz maximum clock, 7 KB of Flash, 256 bytes of RAM, 18 I/O pins, on-board EEPROM, and a 2.0 V to 5.5 V supply. The PIC16F685-I/ML is the most direct option when the same electrical configuration is needed in the industrial temperature grade. Consider the PIC16F688-I/ML when its alternate peripheral mix matches the design and the 7 KB Flash budget must remain unchanged. Choose the PIC16F687-I/ML, PIC16F689-I/ML, or PIC16F690-I/ML when 14 KB of Flash provides useful code headroom, but verify their peripheral, interrupt, timer, communication, and pin-function differences. For every candidate, confirm the QFN exposed-pad layout, programming method, firmware device settings, operating limits, and unused peripheral connections before releasing a production substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16F685-I/ML PIC16F687-I/ML PIC16F688-I/ML PIC16F689-I/ML PIC16F690-I/ML
Package 20-QFN (4x4 mm) 20-QFN (4x4 mm) 20-QFN (4x4 mm) 20-QFN (4x4 mm) 20-QFN (4x4 mm) 20-QFN (4x4 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Operating Voltage Range 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V
Program Memory 7 KB Flash (4K x 14 words) 7 KB Flash (4K x 14 words) 14 KB Flash 7 KB Flash 14 KB Flash 14 KB Flash
RAM 256 bytes 256 bytes 256 bytes 256 bytes 256 bytes 256 bytes
General-Purpose I/O 18 pins 18 pins 18 pins 18 pins 18 pins 18 pins
Temperature Ordering Suffix -E extended grade -I industrial grade -I industrial grade -I industrial grade -I industrial grade -I industrial grade
Special Features 18 I/O, EEPROM, mid-range x14 core 18 I/O, EEPROM, mid-range x14 core 18 I/O, EEPROM, expanded Flash 18 I/O, different communication peripherals 18 I/O, EEPROM, expanded Flash 18 I/O, EEPROM, expanded Flash

جیاکەرەوە سەرەکییەکان

  • Closest same-footprint temperature-grade alternative (بەراورد بەPIC16F685-I/ML)
  • Alternative retains the compact 7 KB Flash target (بەراورد بەPIC16F688-I/ML)
  • More program-memory headroom in the same footprint (بەراورد بەPIC16F687-I/ML)

تێبینییەکانی دیزاین

Use the manufacturer QFN land pattern and connect the exposed pad to VSS through a low-impedance ground region. Place the VDD bypass capacitor immediately beside the supply pin and its return capacitor beside the ground connection, keeping the loop area small. The exposed pad is part of electrical and thermal construction rather than an optional mechanical feature; omitting or poorly stitching its vias can increase ground inductance and impair operation of sensitive timer, oscillator, or communication functions.

Assign multiplexed functions only after checking the complete pin-description table for the selected configuration. Keep the oscillator path compact and away from switching nodes, route programming signals away from high-current outputs, and provide a stable ground reference for analog-capable pins. If the board includes relays, motor drivers, or LED power stages, use a clear separation between power-conversion areas and the PIC16F685-E/ML area so switching transients do not couple directly into oscillator, programming, or measurement traces.

Do not assume that another PIC16F68x device is interchangeable merely because it uses a 20-QFN package. The PIC16F687, PIC16F689, and PIC16F690 provide more Flash than the 7 KB PIC16F685, while their peripheral sets and multiplexed pin functions differ. Compare configuration words, register definitions, interrupt sources, communication peripherals, timer assignments, and firmware tool settings. For the PIC16F685-I/ML, also verify that the -I temperature grade covers the complete intended ambient and junction-temperature range.

The PIC16F685-E/ML operates from 2.0 V to 5.5 V, but the selected regulator must also meet the load transient, noise, and startup requirements of the complete board. Confirm brownout and power-on reset behavior for every rail transition, especially when EEPROM writes occur or actuators are enabled. Use a stable decoupling network at VDD and avoid routing high-current return paths beneath the QFN ground pad, where they could disturb the local reference plane.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The product listing identifies the PIC16F685-E/ML as RoHS compliant. Other environmental, finish, and automotive qualification attributes are not established by the available manufacturer page and should be confirmed for the exact ordering code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pic16f685 datasheet pic16f685 datasheet pdf pic16f685 programming PIC16F685-E/ML datasheet pdf PIC16F685-E/ML pinout PIC16F685-E/ML equivalent PIC16F685-E/ML replacement PIC16F685-E/ML vs PIC16F687-I/ML PIC16F685-E/ML QFN-20 footprint PIC16F685-E/ML application circuit PIC16F685-E/ML price PIC16F685-E/ML stock Microchip PIC16F685-E/ML PIC16F685 20MHz 7KB Flash

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16F685-E/ML PIC16F685-I/ML PIC16F687-I/ML PIC16F688-I/ML PIC16F689-I/ML PIC16F690-I/ML PIC16 8-bit microcontroller mid-range x14 architecture Flash program memory EEPROM data memory embedded controller 20 MHz 2.0 V to 5.5 V 20-QFN QFN package family surface-mount technology exposed pad 18 I/O pins on-chip EEPROM in-system programming RoHS
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ