PIC16F685-E/ML - 20MHz 8-Bit Flash MCU | Microchip Technology
MPN: PIC16F685-E/ML ✓ AktifPIC16F685-E/ML Ringkasan
A PIC16 microcontroller is an embedded-control semiconductor that combines a processor core, program memory, data memory, I/O ports, timers, and communication peripherals on one integrated circuit. The PIC16F685 belongs to the mid-range x14 architecture, commonly described as an enhanced RISC architecture with compact, single-word instructions and integrated Flash program memory. This places it in the hierarchy of embedded controllers, microcontrollers, and integrated circuits.
Key features include a 20 MHz maximum CPU frequency, 7 KB Flash organized as 4K x 14 program words, 256 bytes of RAM, 18 general-purpose I/O pins, and on-board EEPROM. The 2.0 V to 5.5 V operating range supports low-voltage embedded systems, while the small 4 x 4 mm QFN package reduces board area compared with larger 20-pin leaded packages. Its Flash-based program memory also permits in-system programming and simplifies firmware updates.
The PIC16F685 integrates timers, serial communication, comparator, and other control resources around the mid-range PIC16 core. The exposed-pad QFN construction supports improved heat transfer when the PCB provides a properly sized ground pad and thermal vias. Engineers must follow the package drawing and pin-assignment table when routing high-current I/O, programming signals, and analog or timing functions.
Typical uses include compact industrial controllers, low-cost sensor nodes, household appliance controls, LED lighting controllers, battery-powered instruments, and small motor-control products. Its combination of 18 I/O pins, EEPROM, and a wide supply range is especially useful where a board needs configurable mixed-signal inputs, digital outputs, and retained configuration data without adding an external memory device.
A critical design consideration is decoupling. Place the device's supply bypass capacitors close to VDD and VSS, preserve the exposed-pad ground connection, and confirm that every signal assigned to a multiplexed pin remains valid in the selected configuration. The programming connector and bootloader circuit should also be designed around the device's programming and reset requirements.
This product page consolidates the device identity, package details, manufacturer documentation, practical application guidance, and same-package replacement choices. The alternatives and comparison table help engineers evaluate footprint, memory, temperature, and peripheral differences before approving a redesign.
Pilihan pengganti yang segera untuk PIC16F685-E/ML — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC16F685-E/ML (sama faktor bentuk dan kaki) — berbeza dalam Package, Timers, ADC, I/O Pins, Data EEPROM.
PIC16F685-I/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
PIC16F687-I/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC16F688-I/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC16F689-I/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
PIC16F690-I/ML
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC16F685-E/ML Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit Flash microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 7 KB Flash (4K x 14 words) |
| RAM | 256 bytes |
| EEPROM Data Memory | On-board |
| Operating Voltage Range | 2.0 V to 5.5 V |
| General-Purpose I/O Pins | 18 pins |
| Total Pin Count | 20 pins |
| Kemasan | 20-QFN, 4 x 4 mm |
| Package Type | QFN with exposed pad |
| Architecture | Mid-range PIC x14 architecture |
| Program Memory Type | Flash |
| Jenis Pemasangan | Surface mount |
| Temperature Grade | Extended temperature grade indicated by -E suffix |
| Status RoHS | Compliant |
Konfigurasi Pin PIC16F685-E/ML
| Pin 1 | RA0/AN0/C1IN+ — PORTA digital I/O, analog input, or comparator input |
| Pin 2 | RA1/AN1/C1IN- — PORTA digital I/O, analog input, or comparator input |
| Pin 3 | RA2/AN2/VREF-/CVREF — PORTA digital I/O, analog input, voltage reference, or comparator output |
| Pin 4 | RA3/AN3/VREF+/C1IN+ — PORTA digital I/O, analog input, voltage reference, or comparator input |
| Pin 5 | RC0/T1OSO — PORTC digital I/O or Timer1 oscillator output |
| Pin 6 | RC1/T1OSI/CCP2 — PORTC digital I/O, Timer1 oscillator input, or capture/compare output |
| Pin 7 | RC2/P1A/CCP1 — PORTC digital I/O, PWM output, or capture/compare output |
| Pin 8 | RC3/SCK/SCL — PORTC digital I/O, SPI clock, or I2C clock |
| Pin 9 | RC4/SDI/SDA — PORTC digital I/O, SPI data input, or I2C data |
| Pin 10 | RC5/SDO — PORTC digital I/O or SPI data output |
| Pin 11 | VSS — Ground supply connection |
| Pin 12 | RB0/AN4 — PORTB digital I/O or analog input |
| Pin 13 | RB1/AN5 — PORTB digital I/O or analog input |
| Pin 14 | RB2/AN6 — PORTB digital I/O or analog input |
| Pin 15 | RB3/AN7 — PORTB digital I/O or analog input |
| Pin 16 | VDD — Positive supply connection |
| Pin 17 | OSC1/CLKIN — Oscillator input or external clock input |
| Pin 18 | OSC2/CLKOUT — Oscillator output or external clock output |
| Pin 19 | RA4/T0CKI — PORTA digital I/O or Timer0 clock input |
| Pin 20 | RA5/SS/C2OUT — PORTA digital I/O, SPI slave select, or comparator output |
Aplikasi Biasa
PIC16F685-E/ML patut untuk 6 aplikasis: Industrial Sensor and Control Node, Battery-Powered Environmental Monitor, LED Lighting Controller, Household Appliance Controller, Low-Cost Data Acquisition Module, Small Motor and Valve Controller.
Industrial Sensor and Control Node
The PIC16F685-E/ML fits compact industrial sensor nodes because it combines 18 I/O pins with a 2.0 V to 5.5 V operating range and 256 bytes of RAM. The 18 available pins can support digital sensors, alarm inputs, relay outputs, status indicators, and a communications interface without requiring a large external pin driver. Its 7 KB Flash budget is suitable for moderate acquisition, filtering, threshold, and reporting logic, while on-board EEPROM can retain calibration or configuration values. The 4 x 4 mm QFN package also leaves more board area for sensing hardware and power conditioning. Before layout release, verify every multiplexed pin assignment and provide the exposed pad with a continuous thermal-via and ground-plane connection.
Disebarkan
Battery-Powered Environmental Monitor
The PIC16F685-E/ML is suitable for a battery-powered environmental monitor when its 2.0 V minimum operating voltage matches the available regulated rail. The controller can sample external sensors, apply threshold logic, record operating state in EEPROM, and control a low-duty-cycle radio or indicator. Its 256 bytes of RAM requires disciplined buffer management, while the 7 KB Flash allocation must be checked against the complete firmware rather than the application code alone. Sleep-mode behavior, timer wake sources, and average current should be evaluated with the sensor and radio included. A 20-QFN footprint simplifies compact enclosure layouts, but the exposed ground pad and local bypass capacitor must remain directly beneath and adjacent to the device.
Disebarkan
LED Lighting Controller
The PIC16F685-E/ML can serve as the central controller in a small LED lighting system because its 18 I/O pins provide ample digital outputs for channels, mode buttons, and fault signals. Timers and PWM-capable resources can coordinate dimming sequences, while the 20 MHz operating speed supports responsive user-interface handling and status updates. The 7 KB Flash capacity is appropriate for compact lighting effects, configuration tables, and communication routines, and EEPROM can preserve scene or calibration settings. Design the LED driver stage separately because the MCU does not directly replace a constant-current LED power stage. Keep high-current switching loops physically separated from sensitive timing inputs and route decoupling directly to the supply pins.
Disebarkan
Household Appliance Controller
The PIC16F685-E/ML is appropriate for a compact household appliance controller where a board must coordinate switches, indicators, sensors, and a motor or heater driver. Its 2.0 V to 5.5 V range supports common low-voltage control systems, while EEPROM can retain operating profiles without using scarce RAM. The mid-range x14 architecture provides a practical platform for straightforward state-machine firmware, timers, and communication routines. Because the package provides only 20 pins, prioritize pin multiplexing carefully and reserve a programming connector if field updates are expected. Use suitable protection networks for inductive loads and maintain separation between the controller, switching devices, and high-current power paths to reduce electrical noise and temperature rise.
Disebarkan
Low-Cost Data Acquisition Module
The PIC16F685-E/ML can form the control section of a low-cost data-acquisition module when the measurement rate and buffer size are modest. Its 20 MHz maximum frequency supports digital filtering and control calculations, while 18 I/O pins accommodate digital inputs, sensor interfaces, status signals, and an external nonvolatile memory bus if required. The 7 KB Flash capacity favors compact firmware with focused acquisition routines, and the 256-byte RAM should be allocated with stack and interrupt-service overhead included in the analysis. Analog-to-digital conversion details are not specified in the product listing, so confirm the required conversion resources in the manufacturer data sheet before assigning this device. Use a short analog ground path and place bypass capacitance at the supply pins.
Disebarkan
Small Motor and Valve Controller
The PIC16F685-E/ML can control small motors, solenoids, or valves in compact equipment where deterministic sequencing is more important than high processor performance. Timers, interrupt capability, and 18 I/O pins support input monitoring, position or limit sensing, and driver-enable outputs. The 2.0 V to 5.5 V operating range makes the controller suitable for low-voltage systems, while Flash supports repeatable firmware and EEPROM can store operating limits or configuration data. The MCU should drive transistor or gate-driver stages rather than load a motor or valve directly. Design shutdown behavior, flyback protection, and fault inputs independently so a firmware fault does not leave the actuator energized. Keep switching current away from sensitive timing and communication traces.
Disebarkan
Data referensi kejuruteraan untuk PIC16F685-E/ML — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC16F685-I/ML | PIC16F687-I/ML | PIC16F688-I/ML | PIC16F689-I/ML | PIC16F690-I/ML |
|---|---|---|---|---|---|---|
| Package | 20-QFN (4x4 mm) | 20-QFN (4x4 mm) | 20-QFN (4x4 mm) | 20-QFN (4x4 mm) | 20-QFN (4x4 mm) | 20-QFN (4x4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Program Memory | 7 KB Flash (4K x 14 words) | 7 KB Flash (4K x 14 words) | 14 KB Flash | 7 KB Flash | 14 KB Flash | 14 KB Flash |
| RAM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| General-Purpose I/O | 18 pins | 18 pins | 18 pins | 18 pins | 18 pins | 18 pins |
| Temperature Ordering Suffix | -E extended grade | -I industrial grade | -I industrial grade | -I industrial grade | -I industrial grade | -I industrial grade |
| Special Features | 18 I/O, EEPROM, mid-range x14 core | 18 I/O, EEPROM, mid-range x14 core | 18 I/O, EEPROM, expanded Flash | 18 I/O, different communication peripherals | 18 I/O, EEPROM, expanded Flash | 18 I/O, EEPROM, expanded Flash |
Penyeberangsung Jelas
- Closest same-footprint temperature-grade alternative (vsPIC16F685-I/ML)
- Alternative retains the compact 7 KB Flash target (vsPIC16F688-I/ML)
- More program-memory headroom in the same footprint (vsPIC16F687-I/ML)
Catatan Desain
Use the manufacturer QFN land pattern and connect the exposed pad to VSS through a low-impedance ground region. Place the VDD bypass capacitor immediately beside the supply pin and its return capacitor beside the ground connection, keeping the loop area small. The exposed pad is part of electrical and thermal construction rather than an optional mechanical feature; omitting or poorly stitching its vias can increase ground inductance and impair operation of sensitive timer, oscillator, or communication functions.
Assign multiplexed functions only after checking the complete pin-description table for the selected configuration. Keep the oscillator path compact and away from switching nodes, route programming signals away from high-current outputs, and provide a stable ground reference for analog-capable pins. If the board includes relays, motor drivers, or LED power stages, use a clear separation between power-conversion areas and the PIC16F685-E/ML area so switching transients do not couple directly into oscillator, programming, or measurement traces.
Do not assume that another PIC16F68x device is interchangeable merely because it uses a 20-QFN package. The PIC16F687, PIC16F689, and PIC16F690 provide more Flash than the 7 KB PIC16F685, while their peripheral sets and multiplexed pin functions differ. Compare configuration words, register definitions, interrupt sources, communication peripherals, timer assignments, and firmware tool settings. For the PIC16F685-I/ML, also verify that the -I temperature grade covers the complete intended ambient and junction-temperature range.
The PIC16F685-E/ML operates from 2.0 V to 5.5 V, but the selected regulator must also meet the load transient, noise, and startup requirements of the complete board. Confirm brownout and power-on reset behavior for every rail transition, especially when EEPROM writes occur or actuators are enabled. Use a stable decoupling network at VDD and avoid routing high-current return paths beneath the QFN ground pad, where they could disturb the local reference plane.
Maklumat Kesediaan
The product listing identifies the PIC16F685-E/ML as RoHS compliant. Other environmental, finish, and automotive qualification attributes are not established by the available manufacturer page and should be confirmed for the exact ordering code.