PIC16F722-E/MV - 8-Bit 20MHz Flash MCU | Microchip
MPN: PIC16F722-E/MV ✓ چالاکPIC16F722-E/MV گشتی
An 8-bit flash microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, peripherals, and general-purpose I/O in one package. PIC16 devices use a compact instruction set and a hardware-based approach to embedded control, allowing a design to combine digital control functions with analog measurement without requiring a separate analog processor. The PIC16F722 belongs to the broader MCU and embedded-controller hierarchy.
Key features include 3.5 KB of flash program memory, operation from 1.8 V to 5.5 V, and a 20 MHz maximum instruction clock. The MV package provides 40 physical positions and a compact 5 mm by 5 mm land pattern with 0.50 mm pitch, according to the part-specific package listing. Its flash architecture permits in-system reprogramming and supports repeatable firmware updates when the application design includes the required programming and reset circuitry.
The PIC16F722 incorporates an internal low-dropout voltage regulator, and the manufacturer datasheet states that an external capacitor must be connected to an available VCAP pin to stabilize this regulator. This internal supply arrangement supports low-power operation and simplifies external power design, but the VCAP connection and its capacitor value must follow the datasheet requirements. The device also supports peripheral functions suited to embedded control, including general-purpose I/O, timers, serial interfaces, and analog conversion functions.
Typical uses include battery-powered environmental sensors, compact industrial controllers, data-acquisition modules, appliance control boards, and low-energy monitoring equipment. Its small UQFN package is especially useful when board area is limited and the design can accommodate fine-pitch assembly. The 20 MHz clock ceiling also provides sufficient timing margin for responsive control loops, interrupt-driven peripherals, and periodic sensor sampling.
A critical layout consideration is the 0.50 mm pitch UQFN footprint, which requires careful PCB trace planning, adequate solder-paste coverage, and inspection capable of resolving very small joints. Designers should also route VCAP directly to its recommended capacitor and follow the datasheet decoupling network. Firmware, programming, brownout behavior, and peripheral configuration should be validated together rather than treating the MCU solely as a general-purpose logic component.
This product overview combines the exact PIC16F722-E/MV ordering information, package characteristics, manufacturer application guidance, and drop-in replacement constraints into a practical engineering reference. It is intended to help designers evaluate memory, voltage, clock, footprint, programming, and lifecycle requirements before committing the MCU to an embedded-control design.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F722-E/MV — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F722-E/MV (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Internal Oscillator, Low-Power Technology, Architecture.
PIC16F722A-E/MV
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F722A-I/MV
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F722-I/MV
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F723A-E/MV
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F723A-I/MV
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F722-E/MV زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Microcontroller Type | 8-bit Flash PIC16 microcontroller |
| Program Memory | 3.5 KB |
| Program Memory Organization | 2K x 14 words |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Maximum Clock Speed | 20 MHz |
| Internal Oscillator | 16 MHz |
| General-Purpose I/O | 36 I/O |
| پاکێج | 40-pin UQFN, 5 mm x 5 mm, 0.50 mm pitch |
| جۆری دامەزراندن | Surface mount |
| Internal Voltage Regulator | Low-dropout regulator with external VCAP stabilization capacitor |
| Technology | nanoWatt XLP |
| Lead-Free Packaging | Lead-free |
ڕێنمایی ڕێکخستنی پینی PIC16F722-E/MV 40-pin uqfn, 5 mm x 5 mm, 0.50 mm pitch
ڕێکخستنی پین بۆ PIC16F722-E/MV (پاکێجی 40-pin uqfn, 5 mm x 5 mm, 0.50 mm pitch). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F722-E/MV.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F722-E/MV گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Environmental Sensors, Low-Power Data-Acquisition Module, Industrial Control Board, Smart Appliance Controller, LED Lighting Controller, Battery Management and Monitoring.
Battery-Powered Environmental Sensors
The PIC16F722-E/MV fits compact environmental sensors because its 1.8 V to 5.5 V operating range supports energy-conscious sensing nodes, while 3.5 KB of flash provides space for acquisition, filtering, threshold logic, and communications firmware. The 20 MHz maximum clock supports responsive sampling and interrupt-driven peripheral operation without increasing the required logic complexity. Its 40-pin UQFN package, measuring 5 mm by 5 mm, also allows the controller to coexist with a sensor, radio, and power-management circuitry on a small board. The design must include the datasheet-specified VCAP capacitor and should use low-power modes, peripheral interrupts, and batched sensor reads to reduce energy use between readings.
پێشنیارکراو
Low-Power Data-Acquisition Module
The PIC16F722-E/MV is suitable for a compact data-acquisition module that combines sensor inputs with local control. Its 36 general-purpose I/O lines provide connections for digital sensors, interrupt inputs, status indicators, and actuator-control signals, while the 20 MHz clock ceiling gives adequate timing margin for sampling and control loops. With 3.5 KB of program memory, firmware can combine acquisition sequencing, scaling, thresholding, diagnostics, and a compact communications routine. A 1.8 V minimum operating voltage supports low-voltage sensor nodes where every milliamp of quiescent demand matters. Board-level validation should include analog noise, input thresholds, VCAP stability, and the synchronization of acquisition timing across connected sensors.
پێشنیارکراو
Industrial Control Board
The PIC16F722-E/MV can serve as the central controller on a small industrial interface board that handles discrete inputs, relay or valve outputs, status feedback, and local diagnostics. The 8-bit architecture is suitable for deterministic supervisory control, and the 20 MHz maximum clock supports responsive interrupt handling without requiring a high-complexity processor. Operating from 1.8 V to 5.5 V allows the MCU to sit beside modern low-voltage sensor and communications circuits, while the compact UQFN package reduces board-space requirements. The design should use the pin-description tables to map every signal because alternate peripheral functions can differ among PIC16F72x family members. ESD protection, isolation boundaries, grounding, and output-driver sizing remain board-level responsibilities rather than functions of the microcontroller.
پێشنیارکراو
Smart Appliance Controller
The PIC16F722-E/MV is appropriate for appliance control functions such as user-input decoding, motor sequencing, temperature monitoring, and fault management. Its 3.5 KB flash capacity is well suited to compact control firmware, and the 36 I/O lines offer flexible connectivity for switches, sensors, displays, and driver-control signals. The 1.8 V to 5.5 V range permits operation across multiple internal rail choices, while the 20 MHz maximum clock allows deterministic task execution for safety-related interlocks. Because the UQFN footprint uses 0.50 mm pitch, the PCB and assembly process must support fine-pitch soldering and inspection. Firmware validation should include brownout behavior, reset states, watchdog operation, and worst-case timing for motor and heater interlocks.
پێشنیارکراو
LED Lighting Controller
The PIC16F722-E/MV can coordinate LED lighting systems where the controller handles button inputs, status LEDs, timed effects, and communication with an external driver. Its 20 MHz clock ceiling supports responsive updates and timer-based sequencing, while 3.5 KB of flash provides room for a user interface, lighting patterns, diagnostics, and fault recovery. The wide 1.8 V to 5.5 V supply range gives flexibility in battery, USB, and externally regulated designs, although the selected LED driver determines the final power architecture. The MCU should not drive high LED current directly unless its output limits and thermal conditions permit it; use a suitable constant-current driver and keep switching-current paths away from sensitive analog traces. Firmware checks should include open-LED, shorted-channel, and thermal-fault behavior.
پێشنیارکراو
Battery Management and Monitoring
The PIC16F722-E/MV is well matched to battery-powered monitoring equipment because it can operate down to 1.8 V and includes flash for local threshold, filtering, and event-logging functions. The MCU can supervise a voltage, current, or temperature sensor and operate alarms or sleep between measurements to extend battery life. Its 36 I/O lines allow several monitored channels and status signals to share a compact controller design, while the 20 MHz class provides ample timing margin for periodic conversions and communications. A reliable implementation requires careful ADC or sensor conditioning, reference stability, and calibration storage. Validate battery behavior across the full input-voltage range and include firmware checks for undervoltage conditions, sensor faults, and unexpected resets.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F722-E/MV — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F722A-E/MV | PIC16F722A-I/MV | PIC16F722-I/MV | PIC16F723A-E/MV | PIC16F723A-I/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-pin UQFN (MV), 5 mm x 5 mm | 40-pin UQFN (MV) | 40-pin UQFN (MV) | 40-pin UQFN (MV) | 40-pin UQFN (MV) | 40-pin UQFN (MV) |
| Product Family | PIC16F722 | PIC16F722A | PIC16F722A | PIC16F722 | PIC16F723A | PIC16F723A |
| Device Revision | Base PIC16F722 revision | A revision | A revision | Base revision | A revision | A revision |
| Temperature Grade | E grade | E grade | I grade | I grade | E grade | I grade |
| Maximum Clock Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Internal Voltage Regulator | Low-dropout regulator with external VCAP capacitor | Low-dropout regulator with external VCAP capacitor | Low-dropout regulator with external VCAP capacitor | Low-dropout regulator with external VCAP capacitor | Low-dropout regulator with external VCAP capacitor | Low-dropout regulator with external VCAP capacitor |
جیاکەرەوە سەرەکییەکان
- Direct base-family option when exact suffix interchangeability is preferred (بەراورد بەPIC16F722-I/MV)
- Later revision option for product maintenance (بەراورد بەPIC16F722A-E/MV)
- Same-package PIC16F72x expansion path (بەراورد بەPIC16F723A-E/MV)
تێبینییەکانی دیزاین
The 40-pin MV package uses a 0.50 mm pitch in a 5 mm by 5 mm footprint. Assign the PCB land pattern from the manufacturer package drawing, confirm exposed-pad requirements, and design the assembly process for fine-pitch solder bridging risk. Keep analog and high-current switching paths away from MCU supply and sensing pins, and route VCAP as a short, quiet connection directly to its recommended stabilization capacitor.
Follow the Microchip PIC16(L)F722/3/4/6/7 Data Sheet for the VCAP capacitor, supply decoupling, brownout behavior, and power-up sequencing. The internal low-dropout regulator is not a substitute for proper board-level bypassing. Place the specified input and output capacitors close to their pins, provide a low-impedance ground return, and verify operation across the intended 1.8 V to 5.5 V supply range.
Do not approve a replacement solely because its ordering code ends in MV. Compare every physical pin, alternate-function mapping, power pin, programming connection, oscillator option, peripheral feature, memory map, and interrupt vector with the original design. The PIC16F723A family can share the package family while differing in device-specific behavior, so use the manufacturer pin and cross-reference tables before releasing a substitution to production.
Separate clock, programming, and switching paths from sensitive measurement inputs. Use a continuous ground reference where practical, place bulk and ceramic decoupling according to the reference circuit, and keep antenna-like traces short. If the device controls relays, motors, or LED drivers, route high-current paths directly between the driver and load rather than through the MCU area, and account for ground bounce when setting input thresholds.
زانیاری پابەندبوون
The exact-part package information identifies the MV package as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.